Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

An Integrated High-Speed Microstructural Characterization Method Using Simultaneous XRD, Stereo-DIC, and PCI

High-speed characterization of the deformation mechanisms in polycrystalline metals requires the quantification of full strain fields and local microstructural evolutions simultaneously. In this paper, we present a novel experimental method to integrate phase-contrast imaging (PCI), stereographic digital image correlation (stereo-DIC), and full-ring X-ray diffraction (XRD) to allow for the simultaneous characterization of polycrystalline metals at 1MHz or higher. A Kolsky bar was integrated into the synchrotron X-ray source in Sector 32 ID-B at the Advance Photon Source (APS) at Argonne National Laboratory. When the sample is dynamically loaded, the diagnostic methods of full-ring XRD, PCI, and stereo-DIC are properly synchronized to record the deformation behavior at both continuum and microstructural scales as a function of the loading history. An advanced high-strength steel (AHSS) is used as a model material to demonstrate the capabilities of this new experimental method.

36 MATERIALS SCIENCE↗

Mineralogical Analysis of the Oppia Quadrangle of Asteroid (4) Vesta: Evidence for Occurrence of Moderate-Reflectance Hydrated Minerals

Quadrangle Av-10 'Oppia' is one of five quadrangles that cover the equatorial region of asteroid (4) Vesta. This quadrangle is notable for the broad, spectrally distinct ejecta that extend south of the Oppia crater. These ejecta exhibit the steepest ('reddest') visible spectral slope observed across the asteroid and have distinct color properties as seen in multispectral composite images. Compared to previous works that focused on the composition and nature of unusual ('orange') ejecta found on Vesta, here we take into account a broader area that includes several features of interest, with an emphasis on mineralogy as inferred from data obtained by Dawn's Visible InfraRed mapping spectrometer (VIR). Our analysis shows that the older northern and northeastern part of Av-10 is dominated by howardite-like material, while the younger southwestern part, including Oppia and its ejecta blanket, has a markedly eucritic mineralogy. The association of the mineralogical information with the geologic and topographic contexts allows for the establishment of relationships between the age of the main formations observed in this quadrangle and their composition. A major point of interest in the Oppia quadrangle is the spectral signature of hydrous material seen at the local scale. This material can be mapped by using high-resolution VIR data, combined with multispectral image products from the Dawn Framing Camera (FC) so as to enable a clear correlation with specific geologic features. Hydrated mineral phases studied previously on Vesta generally correlate with low-albedo material delivered by carbonaceous asteroids. However, our analysis shows that the strongest OH signature in Av-10 is found in a unit west of Oppia, previously mapped as 'light mantle material' and showing moderate reflectance and a red visible slope. With the available data we cannot yet assess the presence of water in this material. However, we offer a possible explanation for its origin.

Asteroids↗

Addressing CFM Modeling Gaps for Application into NASA’S Future Cutting Edge Missions

NASA, the US industry, and international partners are crafting frameworks to enable sustaining lunar missions. The ongoing programs, led by the agency, and prominent industry players, encompass plans for the sustained use of cryogenic propellants in lunar landers and in-space propellant refueling depots. NASA’s proactive funding initiatives have fueled the advancement of predictive computational models tailored to enhance the storage and transfer of cryogenic propellant. This paper aims to spotlight the latest advancements in this arena and delve into the collaborative efforts surrounding predictive model development within internal NASA programs as well as current and previous collaborations with industry and international partners. The paper presents an overview of recent advancements in cryogenic fluid management model development, along with their correlation with recent microgravity and large-scale cryogenic ground tests. The tests include key experiments such as the ISS Zero-Boil-Off Tank (ZBOT) series of experiments and the (Robotic Refueling Mission 3) RRM3 test during which liquid methane was stored on-orbit for an extended period of five months. The paper also highlights the anchoring of propellant tank pressurized drain tests involving sloshing that were conducted with liquid methane propellant during the Apollo/Saturn Era. Additionally, the paper discusses model anchoring against more recent sloshing tests carried out with liquid hydrogen propellant. Notable large-scale tests, such as a liquid oxygen propellant transfer test conducted by SpaceX were also used to help correlate a two-phase propellant transfer model using the valuable data measured during the test. The paper further showcases model correlations against a substantial oxygen liquefaction test undertaken by NASA to validate In-Situ-Resource-Utilization (ISRU) technologies that will prove pivotal for a sustained lunar presence.

Low-gravity fluid modeling↗

Null geodesics and thermodynamic phase transition of four-dimensional Gauss–Bonnet AdS black hole

Highlights: • Modified gravity theories. • Null geodesics and the thermodynamic phase transition. • Four-dimensional Gauss–Bonnet AdS black hole. • Correlation between gravity and thermodynamics. Modified gravity theories are of great interest in both observational and theoretical studies. In this article, we study the correlation between the null geodesics and the thermodynamic phase transition of a four-dimensional Gauss–Bonnet AdS black hole. Firstly, we study the phase structure of the black hole, using the coexistence and spinodal curves, to understand the phase transition in an extended phase space. The imprints of these phase transition features can be clearly observed from the functional dependence of photon orbit radius and minimum impact parameter with respect to the Hawking temperature and pressure. The change in these two quantities during the phase transition serve as order parameters which characterise the critical behaviour. The correlation shows that thermodynamic phase transition can be studied by observing the effects of strong gravitational field on the photon orbit and vice versa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Large response of charge stripes to uniaxial stress in La 1.475 Nd 0.4 Sr 0.125 CuO 4

The La-based "214"cuprates host several symmetry-breaking phases, including superconductivity, charge and spin order in the form of stripes, and a structural orthorhombic-to-tetragonal phase transition. Therefore these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering experiments on La 1.475 Nd 0.4 Sr 0.125 CuO 4 (LNSCO-125) that reveal a significant response of charge stripes to uniaxial tensile stress of ~0.1GPa. These effects include a reduction of the onset temperature of stripes by ~50K, a 29-K reduction of the low-temperature orthorhombic-to-tetragonal transition, competition between charge order and superconductivity, and a preference for stripes to form along the direction of applied stress. Altogether, we observe a dramatic response of the electronic properties of LNSCO-125 to a modest amount of uniaxial stress.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correlative image learning of chemo-mechanics in phase-transforming solids

We report constitutive laws underlie most physical processes in nature. However, learning such equations in heterogeneous solids (for example, due to phase separation) is challenging. One such relationship is between composition and eigenstrain, which governs the chemo-mechanical expansion in solids. Here we developed a generalizable, physically constrained image-learning framework to algorithmically learn the chemo-mechanical constitutive law at the nanoscale from correlative four-dimensional scanning transmission electron microscopy and X-ray spectro-ptychography images. We demonstrated this approach on Li X FePO 4 , a technologically relevant battery positive electrode material. We uncovered the functional form of the composition–eigenstrain relation in this two-phase binary solid across the entire composition range (0 ≤ X ≤ 1), including inside the thermodynamically unstable miscibility gap. The learned relation directly validates Vegard’s law of linear response at the nanoscale. Our physics-constrained data-driven approach directly visualizes the residual strain field (by removing the compositional and coherency strain), which is otherwise impossible to quantify. Heterogeneities in the residual strain arise from misfit dislocations and were independently verified by X-ray diffraction line profile analysis. Our work provides the means to simultaneously quantify chemical expansion, coherency strain and dislocations in battery electrodes, which has implications on rate capabilities and lifetime. Broadly, this work also highlights the potential of integrating correlative microscopy and image learning for extracting material properties and physics.

36 MATERIALS SCIENCE↗

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗

Two-phase measurements of a spray in the wake of a bluff body

The dynamics of spray drop interaction with the turbulent, recirculating wake of a flat disk bluff body were investigated using a phase Doppler particle analyzer to determine drop size and velocity and the gas-phase velocity. Detailed measurements obtained included spray drop size, axial and radial velocity, angle of trajectory, and size-velocity correlations. The gas-phase velocity was determined from seeding of the two-phase flow. Results showed dramatic differences in drop behavior for various size classes when interacting with the turbulent flow field. Small drops were quickly entrained and recirculated, while initially, the larger drops continued in the general direction of the spray cone. Further downstream, significant numbers of large drops recirculated, generating a bifurcated size-velocity correlation. These lateral convections and streamwise accelerations and decelerations strongly influenced the number density along with size and velocity distributions. The complex interaction of the spray with the turbulent air-flow points out the need for spatially-resolved measurements that determine drop behavior for individual size classes, rather than characterizing a spray only via simple integral quantities such as the Sauter mean diameter.

Rudoff, R. C.↗

Case Study of Using Flocad to Model a Ground Test Station Ln2 Heat Exchanger

This paper presents a case study of using FLOCAD to model the heat transfer and boiling flow behavior of a Liquid Nitrogen (LN2) ground station equipment heat exchanger. The unique aspect of this work is that is one of very few studies documenting the use of FLOCAD in the spacecraft thermal control community. The results of the simulations described herein were used to guide and plan the execution of thermal vacuum testing spacecraft hardware using a ground test heat exchanger such as the one modeled herein. The paper will review the theory of two-phase boiling flow and correlations used by SINDA/FLUINT as well as the terminology and nomenclature used within Thermal Desktop / FLOCAD regarding two-phase boiling flow heat transfer modeling and simulation. Results for using the ground station heat exchanger as a heat sink in a thermal vacuum test set up are shown in order to demonstrate the set-up and execution of a typical FLOCAD model. Results indicate that properly modeling of the two-phase behavior is critical in order to ascertain the time constant associated with the heat exchanger, as well as understanding the temperature distribution across the test equipment and prediction of required LN2 flowrates to be used during testing. The paper is meant to augment the FLOCAD user’s manual and serve as a tutorial for thermal engineers and analysts wishing to learn and apply FLOCAD to industrial problems.

Anderson, Kevin R.↗

Topological phase transition to a hidden charge density wave liquid

Charge density waves (CDWs), electronic crystals that form within a host solid, have long been speculated to melt into a spatially textured electronic liquid. Though they have not been previously detected, liquid CDWs may nonetheless be fundamental to the phase diagrams of many correlated electron systems, including high temperature superconductors and quantum Hall states. In one of the most promising candidate materials capable of hosting a liquid CDW, 1T-TaS2, a structural phase transition impedes its observation. Here, by irradiating the material with a femtosecond light pulse, we circumvent the structural phase transition to reveal how topological defect dynamics govern the otherwise invisible CDW correlations. Upon photoexcitation, the CDW diffraction peaks broaden azimuthally, initially revealing a hexatic state. At higher temperatures, photoexcitation completely destroys translational and orientational order and only a ring of diffuse scattering is observed, a key signature of a liquid CDW. Our work provides compelling evidence for a defect-unbinding transition to a CDW liquid and presents a protocol for uncovering states that are hidden by other transitions in thermal equilibrium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonperturbative study of bulk photovoltaic effect enhanced by an optically induced phase transition

Solid systems with strong correlations and interactions under light illumination have the potential for exhibiting interesting bulk photovoltaic behavior in the non-perturbative regime, which has remained largely unexplored in the past theoretical studies. We investigate the bulk photovoltaic response of a perovskite manganite with strongly coupled electron-spin-lattice dynamics, using real-time simulations performed with a tight-binding model. The transient changes in the band structure and the photoinduced phase transitions, emerging from spin and phonon dynamics, result in a nonlinear current versus intensity behavior beyond the perturbative limit. The current rises sharply across a photoinduced magnetic phase transition, which later saturates at higher light intensities due to excited phonon and spin modes. The predicted peak photoresponsivity is orders of magnitude higher than other known ferroelectric oxides such as BiFeO$_3$. We disentangle phonon-and spin-assisted components to the ballistic photocurrent, showing that they are comparable in magnitude. Our results illustrate a promising alternative way for controlling and optimizing the bulk photovoltaic response through the photoinduced phase transitions in strongly-correlated systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

Exact bounds for dynamical critical exponents of transverse-field Ising chains with a correlated disorder

Highlights: • Analytic results in disordered quantum systems are obtained. • Correlated disorder changes the universality class of quantum phase transitions. • The lower and upper bounds of the dynamical critical exponent are obtained. This study investigates the dynamical critical exponent of disordered Ising chains under transverse fields to examine the effect of a correlated disorder on quantum phase transitions. The correlated disorder, where the on-site transverse field depends on the nearest-neighbor coupling strengths connecting the site, gives a qualitatively different result from the uncorrelated disorder. In the uncorrelated disorder cases where the transverse field is either homogeneous over sites or random independently of the nearest-neighbor coupling strengths, the dynamical critical exponent is infinite. In contrast, in the presence of the correlated disorder, we analytically show that the dynamical critical exponent is finite. We also show that the dynamical critical exponent depends on the tuning process of the transverse field strengths.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Eye-head coordination during optokinetic stimulation in squirrel monkeys

Head and eye movements in the yaw plane were recorded during and after optokinetic stimulation in squirrel monkeys. 1) Phasic or tonic head deviations to the side of the ocular quick phase occurred in 94% of total recordings (n = 50) during the perstimulus period, and in 75% of recordings (n = 49) during the poststimulus period. Magnitude of mean head deviation was significantly different between perstimulus and poststimulus periods. 2) Head nystagmus associated with eye nystagmus was consistently observed in seven of nine squirrel monkeys during optokinetic stimulation. Squirrel monkeys are thereby less prone to display head nystagmus than either guinea pigs, pigeons or chickens. 3) Slow phase speeds of coupled head and eye nystagmus were subjected to statistical analysis. A highly significant negative correlation was found between slow phase head and eye speeds. The correlation coefficient was - 0.81 at 60 degrees / sec stimulus (n = 119) and -0.72 at 100 degrees / sec stimulus (n = 131). The gaze speed, calculated by summing the head and eye speeds, was 59.1 plus or minus 6.8 / sec at 60 degrees / sec and 92.2 plus or minus 11.4 at 100 degrees / sec stimulus. There was no significant difference between the gaze speed in a free head condition and the eye speed when the head was fixed.

Eye Movements↗

Suppressed carrier full-spectrum combining

A technique to accomplish full spectrum arraying where all the telemetry power is put into the subcarrier sidebands (suppressed carrier) is described. The matched filter needed in each antenna prior to cross correlation for deriving the coherence delay and phase offsets is an open loop version of the telemetry phase lock loop provided in the Advanced Digital Receiver. In analogy with a Costas loop telemetry receiver, a squaring loss is derived, and a signal to noise ratio for the cross correlation loop phase is presented.

Rogstad, D. H.↗

Lateral heterogeneity and azimuthal anistropy of the upper mantle: Love and Rayleigh waves 100-250 sec

The lateral heterogeneity and apparent anisotropy of the upper mantle are studied by measuring Rayleigh and Love wave phase velocities in the period range 100-250 sec. Spherical harmonic descriptions of the lateral heterogeneity are obtained for order and degree up to 1=m=10. Slow regions are evident at the East Pacific rise, northeast Africa, Tibet, Tasman sea, southwestern North America and triple junctions in the Northern Atlantic and Indian oceans. Fast regions occur in Australia, western Pacific and the eastern Atlantic. Details which are not evident in previous studies include two fast regions in the central Pacific and the subduction zone in the Scotia Arc region. Inversion for azimuthal dependence showed (1) little correlation between the fast phase velocity directions and the plate motion vector in plate interiors, but (2) correlation of the fast direction with the perpendicular direction to trenches and ridges. Phase velocity is high when waves propagate perpendicular to these structures. Severe tradeoffs exist between heterogeneity and azimuthal dependence because of the yet unsatisfactory path coverage.

Tanimoto, T.↗

Lateral heterogeneity and azimuthal anisotropy of the upper mantle - Love and Rayleigh waves 100-250 sec

The lateral heterogeneity and apparent anisotropy of the upper mantle are studied by measuring Rayleigh and Love wave phase velocities in the period range 100-250 sec. Spherical harmonic descriptions of the lateral heterogeneity are obtained for order and degree up to 1=m=10. Slow regions are evident at the East Pacific rise, northeast Africa, Tibet, Tasman sea, southwestern North America and triple junctions in the Northern Atlantic and Indian oceans. Fast regions occur in Australia, western Pacific and the eastern Atlantic. Details which are not evident in previous studies include two fast regions in the central Pacific and the subduction zone in the Scotia Arc region. Inversion for azimuthal dependence showed (1) little correlation between the fast phase velocity directions and the plate motion vector in plate interiors, but (2) correlation of the fast direction with the perpendicular direction to trenches and ridges. Phase velocity is high when waves propagate perpendicular to these structures. Severe tradeoffs exist between heterogeneity and azimuthal dependence because of the yet unsatisfactory path coverage.

Tanimoto, T.↗

Phase Fluctuations at Goldstone Derived from 1-Year Site Testing Interferometer Data

A two-element site test interferometer has been deployed at the NASA Deep Space Network (DSN) tracking complex in Goldstone, California, since May 2007. The interferometer system consists of two offset-fed 1.2 m parabolic reflectors which monitor atmospheric-induced amplitude and phase fluctuations on an unmodulated beacon signal (20.199 GHz) broadcast from a geostationary satellite (Anik F2). The geometry of the satellite and the ground-based infrastructure imposes a 48.5 elevation angle with a separation distance of 256 m along an east-west baseline. The interferometer has been recording phase fluctuation data, to date, for 1 yr with an overall system availability of 95 percent. In this paper, we provide the cumulative distribution functions (CDFs) for 1 year of recorded data, including phase rms, spatial structure function exponent, and surface meteorological measurements: surface wind speed, relative humidity, temperature, barometric pressure, and rain rate. Correlation between surface measurements, phase rms, and amplitude rms at different time scales are discussed. For 1 year, phase fluctuations at the DSN site in Goldstone, are better than 23 for 90 percent of the time (at 48.5 elevation). This data will be used to determine the suitability of the Goldstone site as a location for the Next Generation Deep Space Network.

Nessel, James A.↗

Synthetic estimation filters for a control system

Hybrid optical correlators, which use spatial light modulators and solid state imagers to interface computers and optical Fourier correlators, will allow the rapid changing of filters and digital pre- or post-correlation processing in vision systems. However, optical correlation (particulary with phase-only filtration) is notoriously sensitive to mismatches of rotation and magnification between the reference image and the input image. Such sharpness is not always desirable if the correlation pattern is to be used in a control system. Two methods of conforming the response of an inherently sharp-response optical correlation to an in plane rotation between reference and object images are discussed. The objective is to condition the correlation for better suitability to a vision-controlled system. The first method is controlled convolutional blurring of a reference image followed by construction of a matched filter (perhaps implemented as a phase-only filter). An alternative is discussed in more detail: it is a synthesis from sharp filters, so weighted as to produce a specified off-center behavior.

Juday, Richard D.↗