Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE STUDIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Investigating Particle Phase State Dependencies during a Historic Pacific Northwest Wildfire Event

The function and lifetime of an atmospheric particle are greatly dependent upon its phase state. Studying particle phase states from specific ambient source types is often challenging due to uncontrolled environmental conditions and multiple source contributions. However, a historic Pacific Northwest wildfire event occurred in September 2020, providing a rare opportunity to study a pseudo-single particle type ambient sample (i.e., wildfire) over time. Sampling was performed in Richland, Washington, capturing aged particles from shifting wildfire sources. In addition to source variability, temporal variation in wildfire particle phase state was observed from single particle analyses. Despite this, single particle elemental compositions were homogenous over time (=87% carbonaceous) with no significant temporal variation in organic functional group abundances within individual particles either (e.g., 4% relative standard deviation in alkene contributions). While particle composition is indeed known to affect phase state, water uptake appeared to be the most significant contributor to phase state variability amongst single particles here, as particle aspect ratios (related to phase state) linearly correlated with ambient relative humidity during sampling (R2 = 0.65). Therefore, while limited to a case study, meteorological considerations are found to convey greater comparative importance than particle composition for aged particle phase state predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of CeFe10.5Mo1.5 with ThMn12-type structure by melt spinning

Rare earth compounds RFe12_xMx with tetragonal ThMn12-type structure are of great research interest for potential applications as permanent magnets. These materials are known to serve as the precursors for nitriding and hydriding processes which in certain conditions can dramatically increase the Curie temperature, spontaneous magnetization, and affect the magnetic anisotropy. In this paper, we report the phase study of CeFe10.5Mo1.5 samples melt spun at various surface wheel speeds vs between 5 m/s and 60 m/s. The results from quantitative Rietveld analysis indicate that the as-spun ribbons are a mixture of primary CeFe10.5Mo1.5 phase with impurity phases such as Ce2Fe17, Fe-Mo alloy and CeFe2. When the wheel speed vs is below 25 m/s, CeFe10.5Mo1.5 phase accounts for greater than 85 wt% in the as-spun ribbons, while the Fe-Mo alloy is the only detectable impurity phase. Above v(s)=25 m/s, as the wheel speed increases, CeFe10.5Mo1.5 phase decreases monotonically to about 60 wt% at v(s)=6O m/s while the amounts of impurity phases increase. Thermogravimetric measurement indicates that the Curie temperature T-c. corresponding to CeFe10.5Mo1.5 phase is 341 K. As a result, the best performing sample melt spun at v(s),=15 m/s only exhibits an energy product BHmax=0.121 MGOe at room temperature. Although such a number is modest for a permanent magnet, further nitriding is expected to greatly enhance the Curie temperature, and hence the magnetic performance. (C) 2013 Elsevier B.V. All rights reserved.

Zhou, C↗

On the Extended Series of Quaternary Zintl Phases Ca13REMnSb11 (RE = La–Nd, Sm, Gd–Dy)

Eight new compounds with a general formula Ca 14– x RE x MnSb 11 ( RE = La–Nd, Sm, Gd–Dy; x ≈ 1) were synthesized by the molten flux method and their structures were established via single‐crystal X‐ray diffraction. The overarching goal of this study was to investigate the effect of electron doping, via substitution of RE 3+ at Ca 2+ sites, on the crystal structure and physical properties of Ca 14 MnSb 11 , which is a candidate for thermoelectric applications. All studied phases are isostructural, and crystallize in the tetragonal body‐centered space group I 4 1 / acd (Ca 14 AlSb 11 structure type, Pearson index tI 208). The structure is made up of MnSb 4 10– tetrahedra, randomly mixed Ca 2+ and RE 3+ cations, Sb 3– anions, and linear Sb 3 7– polyanions. Comprehensive structural work confirms high rare‐earth metal content with Ca 2+ / RE 3+ randomly mixed on all four cation sites, with the caveat that the larger RE atoms (La–Nd) prefer to occupy the Ca2 site, while the smaller RE atoms (Sm, Gd, Tb, and Dy) preferably occupy the Ca1 site. Nearly phase‐pure polycrystalline samples have been synthesized using solid‐state reactions, and have been used for physical property measurements. The resistivities of the bulk Ca 14– x RE x MnSb 11 ( RE = La–Nd, Sm, Gd; x ≈ 1) samples reveal semiconducting behavior, consistent with the notion of electron doping in the parent p ‐type Ca 14 MnSb 11 material. Magnetic susceptibilities suggest complex magnetic ordering at temperatures below ca. 50 K, likely originating from coupling between two or more magnetic sub‐lattices.

Prakash, Jai↗

Systematic study on the phase transition of confined fluid mixture up to the critical region

Systematic experimental study on the phase transition of confined fluids up to the critical region has been performed, in which many new insights have been obtained. For confined pure fluids, compared to the bulk phase, the critical point shifts to lower pressure and temperature, but the relative shift of critical pressure is much larger than that of critical temperature. The behavior of the shift, i.e., the shift as a function of pore size, is dependent on the pore type. For confined fluid mixtures, compared to the bulk phase, the critical point also shifts to lower pressure and temperature, and the relative shift of critical pressure is also much larger than that of critical temperature. Confined fluid mixture behaves similarly to confined pure fluid, i.e., it exhibits hysteresis at lower temperature range and does not exhibit phase coexistence or phase envelope. An equation of state for confined pure fluids, based on the Generalized van der Waals partition function, has also been developed and demonstrated to accurately predict the capillary condensation of simple molecules in MCM-41. The parameters of the equation of state are derived from experimental critical point.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

AC calorimetry of H 2 O at pressures up to 9 GPa in diamond anvil cells

If successfully developed, calorimetry at tens of GPa of pressure could help characterize phase transitions in materials such as high-pressure minerals, metals, and molecular solids. In this paper, we extend alternating-current calorimetry to 9 GPa and 300 K in a diamond anvil cell and use it to study phase transitions in H 2 O. In particular, water is loaded into the sample chambers of diamond-cells, along with thin metal heaters (1 μm-thick platinum or 20 nm-thick gold on a glass substrate) that drive high-frequency temperature oscillations (20 Hz to 600 kHz; 1 to 10 K). The heaters also act as thermometers via the third-harmonic technique, yielding calorimetric data on (1) heat conduction to the diamonds and (2) heat transport into substrate and sample. Using this method during temperature cycles from 300 to 200 K, we document melting, freezing, and proton ordering and disordering transitions of H 2 O at 0 to 9 GPa, and characterize changes in thermal conductivity and heat capacity across these transitions. Finally, the technique and analysis pave the way for calorimetry experiments on any non-metal at pressures up to ~100 GPa, provided a thin layer (several μm-thick) of thermal insulation supports a metallic thin-film (tens of nm thick) Joule-heater attached to low contact resistance leads inside the sample chamber of a diamond-cell.

36 MATERIALS SCIENCE↗

Effects of Ti, Zr, and Hf on the Phase Stability of Mo-Mo 3 Si+Mo 5 SiB 2 Alloys at 1600 C

Understanding the stability of the three-phase Mo{_}+Mo{sub 3}Si+Mo{sub 5}SiB{sub 2} region is important for alloy design of Mo-Si-B-based refractory metal intermetallic composites. In this work, thermodynamic modeling is coupled with guided experiments to study phase stability in this three-phase region of the Mo-Si-B-X (X = Ti, Zr, Hf) system. Both the calculated and experimental results show that additions of Zr and Hf limit significantly the stability of the three-phase region because of the formation of the ternary phases MoSiZr and MoSiHf, while Ti addition leads to a much larger region of stability for the three-phase equilibrium.

36 MATERIALS SCIENCE↗

Phase Transition and Compressibility in Silicon Nanowires

Silicon nanowires (Si NWs), one-dimensional single crystalline, have recently drawn extensive attention, thanks to their robust applications in electrical and optical devices as well as in the strengthening of diamond/SiC superhard composites. Here, we conducted high-pressure synchrotron diffraction experiments in a diamond anvil cell to study phase transitions and compressibility of Si NWs. Our results revealed that the onset pressure for the Si I-II transformation in Si NWs is approximately 2.0 GPa lower than previously determined values for bulk Si, a trend that is consistent with the analysis of misfit in strain energy. The bulk modulus of Si-I NWs derived from the pressure-volume measurements is 123 GPa, which is comparable to that of Si-V NWs but 25% larger than the reported values for bulk silicon. The reduced compressibility in Si NWs indicates that the unique wire-like structure in nanoscale plays vital roles in the elastic behavior of condensed matter.

36 MATERIALS SCIENCE↗

Insight into the Ligand-Mediated Synthesis of Colloidal CsPbBr 3 Perovskite Nanocrystals: The Role of Organic Acid, Base, and Cesium Precursors

While convenient solution-based procedures have been realized for the synthesis of colloidal perovskite nanocrystals, the impact of surfactant ligands on the shape, size, and surface properties still remains poorly understood, which calls for a more detailed structure-morphology study. Here in this paper we have systematically varied the hydrocarbon chain composition of carboxylic acids and amines to investigate the surface chemistry and the independent impact of acid and amine on the size and shape of perovskite nanocrystals. Solution phase studies on purified nanocrystal samples by (1)H NMR and IR spectroscopies have confirmed the presence of both carboxylate and alkylammonium ligands on surfaces, with the alkylammonium ligand being much more mobile and susceptible to detachment from the nanocrystal surfaces during polar solvent washes. Moreover, the chain length variation of carboxylic acids and amines, ranging from 18 carbons down to two carbons, has shown independent correlation to the size and shape of nanocrystals in addition to the temperature effect. We have additionally demonstrated that employing a more soluble cesium acetate precursor in place of the universally used Cs 2 CO 3 results in enhanced processability without sacrificing optical properties, thus offering a more versatile recipe for perovskite nanocrystal synthesis that allows the use of organic acids and amines bearing chains shorter than eight carbon atoms. Overall our studies have shed light on the influence of ligand chemistry on crystal growth and stabilization of the nanocrystals, which opens the door to functionalizable perovskite nanocrsytals through surface ligand manipulation.

colloidal nanocrystal↗

The Influence of the Nature of Halogen on the Local Structure and Intercalation of Water in Oxyhalides Ba{sub 2}InO{sub 3}X (X = F, Cl, Br)

Oxyhalides Ba{sub 2}InO{sub 3}F, Ba{sub 2}InO{sub 3}Cl, and Ba{sub 2}InO{sub 3}Br are synthesized, and their phase homogeneity is confirmed by the method of X-ray diffraction. The influence of the nature of a halide ion on the crystal-lattice parameters and on the In–O bond lengths is established. The ability of the studied phases to undergo hydration and formation of oxygen–hydrogen groups in their structure is proven.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metal-Centered 17-Electron Radicals CpM(CO)3• (M = Cr, Mo, W): A Combined Negative Ion Photoelectron Spectroscopic and Theoretical Study

Despite the importance of group VI metal-centered 17-electron radicals CpM(CO)3 (Cp = 5-C5H5, M = Cr, Mo, W) in establishing many of the fundamental reactions now known for metal-centered radicals, spectroscopic characterization of their electronic properties and structures has been very challenging due to their high reactivity. Here we report a gas-phase study of these species by means of photodetachment photoelectron spectroscopy (PES) of their corresponding 18-electron anions and theoretical electronic structure calculations. Three well-separated spectral features are observed by PES for each anionic species. Electron affinities (EAs) of CpM(CO)3 were experimentally measured from the threshold of each spectrum to be 2.38 ± 0.02 (M = Cr), 2.63 ± 0.02 (Mo), and 2.63 ± 0.01 eV for (W), well correlated with the reported redox potentials measured in solution. Theoretical calculations for all anionic and neutral (radical) species gave calculated EAs and band gaps that are in good agreement with the experimental data. Molecular orbital (MO) analyses for each anion indicate that the top three occupied MOs are mainly metal-based and contribute to the first spectral feature, whereas the next two MOs are largely from C5H5 moiety and contribute to the second spectral feature. The calculations further exhibit appreciable anion-to-neutral structural changes for all three species but with the change for the W species being the smallest, consistent with the W spectra being better resolved than the other two.

Environmental Molecular Sciences Laboratory↗

Study of phase-locking of optoelectronic microwave oscillators considering amplitude perturbation

This paper presents a detailed study of the phase-locking phenomenon in single-loop optoelectronic microwave oscillators considering strong radio frequency (RF) signal injection. The analyses are made in terms of the lock-range, beat frequency and the spectral components of the unlocked-driven oscillator in presence of amplitude perturbation. An approximate expression for the amplitude perturbation of the oscillator is derived and the influence of amplitude perturbation on the phase-locking dynamics is analysed. The influence of external RF signal on the frequency pulling of the unlocked-driven optoelectronic oscillator (OEO) is also studied. It is shown that the unlocked-driven OEO output signal has a very non-symmetrical sideband distribution about the carrier. Also, analytical technique for studying the response characteristics of a phase-locked OEO to pure continuous wave amplitude modulated signal is presented. The simulation findings are also given in partial support of the conclusions of the analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase selection and transition in Hf-rich hafnia-titania nanolaminates

Hf-rich hafnia-titania nanolaminate films with five HfO{sub 2}-TiO{sub 2} bilayer architectures (0.64 to 0.94 Hf atom fraction) were sputter deposited on unheated fused silica substrates, annealed post-deposition from 573 to 1273 K, and analyzed by x-ray diffraction to study phase selection and transition. Isochronal annealing for 1 h intervals from 573 to 1173 K produces weak crystallization into monoclinic (m) HfO{sub 2} doped with Ti, i.e., m-Hf{sub 1-x}Ti{sub x}O{sub 2}. The amount of Ti incorporated into m-HfO{sub 2} depends upon both architecture and overall stoichiometry, but in all but the coarsest architecture, exceeds the bulk solubility limit of x = 0.05. Initial annealing at 1273 K produces significant crystallization into a biphasic structure, m-Hf{sub 1-x}Ti{sub x}O{sub 2} and orthorhombic (o) HfTiO{sub 4}. From bulk phase equilibrium considerations, o-HfTiO{sub 4} is expected to crystallize under conditions of interfacial bilayer mixing. However, upon further annealing at 1273 K, o-HfTiO{sub 4} proves to be unstable. o-HfTiO{sub 4} demixing inevitably occurs independent of architecture and stoichiometry, resulting in final crystallization products after 96 h at 1273 K that are m-Hf{sub 1-x}Ti{sub x}O{sub 2} with x {approx_equal} 0.05 and TiO{sub 2} doped with Hf. We suggest that o-HfTiO{sub 4} instability arises from a driving force to form domains similar to those found in the low temperature in/commensurate structures of ZrTiO{sub 4}. A detailed crystallographic group-subgroup analysis of the o (Pbcn) {yields} m (P2{sub 1}/c) transition shows that these domains can be represented by an orientation twin in the latter structure and their creation can be achieved by a single step second-order phase transition.

36 MATERIALS SCIENCE↗

High‐Pressure Phase Stability and Thermoelastic Properties of Iron Carbonitrides and Nitrogen in the Deep Earth

Abstract Iron‐dominant metallic phases are likely the primary hosts for nitrogen in the reduced deep Earth, hence the storage of nitrogen in the lower mantle and the core is governed by the behavior of the Fe‐N‐C system at high temperatures and pressures. In this study, phase transitions and thermoelastic properties of iron carbonitrides were investigated at high pressure‐temperature conditions by diamond anvil cell experiments and first‐principles calculations. Experimental data revealed no phase transition in ε ‐type Fe 4 (N 0.6 C 0.4 ) or Fe 7 (N 0.75 C 0.25 ) 3 up to 60 GPa at room temperature. At high temperature, Fe 7 (N 0.75 C 0.25 ) 3 transforms into the Fe 3 C‐type phase at ∼27 GPa, and then into the Fe 7 C 3 ‐type phase at ∼45 GPa, which is also corroborated by our theoretical calculations. We found that the phase stability of iron carbonitrides mainly depends on the N/C ratio, and the elastic properties of iron carbonitrides are dominantly affected by the Fe/(N+C) ratio. Iron carbonitrides with diverse structures may be the main host for nitrogen in the deep mantle. Some iron carbonitride inclusions in lower mantle diamonds could be the residue of the primordial mantle or originate from subducted nitrogen‐bearing materials, rather than iron‐enriched phases of the outer core. In addition, our experiments confirmed the existence of Fe 7 C 3 ‐type Fe 7 C 3 ‐Fe 7 N 3 solid solutions above 40 GPa. Fe 7 C 3 ‐type Fe 7 (C, N) 3 has comparable density and thermoelastic properties to its isostructural endmembers and may be a promising candidate constituent of the Earth's inner core.

Huang, Shengxuan↗

Electronic and structural origin of ultra-incompressibility of 5d transition-metal diborides MB2 (M = W, Re, Os)

A first-principles approach was used to investigate the roles of bond topology and covalency in the phase stability and elastic strength of a series of 5d transition-metal diborides, focusing on the three mid-row elements (W, Re, Os) with the compressibilities among the lowest for metals. Among all of the phases studied, the c-axis of the ReB2- type structure is shown to exhibit the largest incompressibility, comparable to that of diamond. The ReB2-type structure is found to be the ground structure for WB2 and ReB2 but a pressure-induced phase (above 2.5 GPa) for OsB2. The origin of the ultraincompressibility correlates not only with strong covalency, but also with the zigzag topology of interconnected covalent bonds. Interestingly, the Vickers hardness of WB2 is estimated to be similar to that of superhard ReB2.

36 MATERIALS SCIENCE↗

Escalated Phase Separation Driven Enhanced Magnetoresistance in Manganite/Iridate Epitaxial Heterostructures

Phase separation in manganites leads to unique magnetic and electronic properties. 50% Ca-doped LaMnO 3 (LCMO), at the boundary of ferromagnetic (FM) and antiferromagnetic (AFM) states in La 1-x Ca x MnO 3 (0 ≤ x ≤ 1), is an ideal system to study phase separation behavior. The investigation reveals the effect of a 5d-metal perovskite SrIrO 3 (SIO) on the phase separation, magnetic, and magnetoresistance (MR) properties of LCMO. Single-layer and bilayer LCMO films, both appear purely ferromagnetic along the in-plane (IP) magnetic field direction, but show the tendency of temperature-dependent ferromagnetic and antiferromagnetic or charge-ordered (CO) phase separation with the out-of-plane (OOP) applied field. The MR, and colossal magnetoresistance (CMR), observed in LCMO/SIO bilayers are two orders and an order of magnitude (in %) larger, respectively than that in the single-layer film. The coexistence of FM and AFM/CO phases is responsible for the CMR and MR enhancement in the LCMO/SIO bilayer, pointing toward the importance of the phase separation and competition of both the individual materials in enhancing their magnetic and electronic properties.

36 MATERIALS SCIENCE↗

Deformation and Failure Mechanisms of Shape Memory Alloys

The goal of this research was to understand the fundamental mechanics that drive the deformation and failure of shape memory alloys (SMAs). SMAs are difficult materials to characterize because of the complex phase transformations that give rise to their unique properties, including shape memory and superelasticity. These phase transformations occur across multiple length scales (one example being the martensite-austenite twinning that underlies macroscopic strain localization) and result in a large hysteresis. In order to optimize the use of this hysteretic behavior in energy storage and damping applications, we must first have a quantitative understanding of this transformation behavior. Prior results on shape memory alloys have been largely qualitative (i.e., mapping phase transformations through cracked oxide coatings or surface morphology). The PI developed and utilized new approaches to provide a quantitative, full-field characterization of phase transformation, conducting a comprehensive suite of experiments across multiple length scales and tying these results to theoretical and computational analysis. The research funded by this award utilized new combinations of scanning electron microscopy, diffraction, digital image correlation, and custom testing equipment and procedures to study phase transformation processes at a wide range of length scales, with a focus at small length scales with spatial resolution on the order of 1 nanometer. These experiments probe the basic connections between length scales during phase transformation. In addition to the insights gained on the fundamental mechanisms driving transformations in shape memory alloys, the unique experimental methodologies developed under this award are applicable to a wide range of solid-to-solid phase transformations and other strain localization mechanisms.

36 MATERIALS SCIENCE↗

Microstructure and phase evolution in the U-10Zr fuel investigated by in situ TEM heating experiments

The development of U-Zr metallic nuclear fuel for fast spectrum reactors is impacted by a lack of mechanistic understanding of the fuel behavior evolution under thermal irradiation conditions, despite previous works providing substantial fuel performance data. This work uses in-situ transmission electron microscopy heating experiments to study phase and microstructural evolution in several unirradiated U-10Zr specimens during rapid heating ramps (from room temperature to 1000 °C). The starting a-U + bcc-(Zr, U) eutectic microstructure began to decompose above 600 °C. The decomposition initiated from the bcc (U,Zr) phase. Similar results were observed for all specimens even when fabricated by different routes (e.g., cold rolled or annealed). As a result, the impact of observed microstructure and phase evolutions at high temperatures on fuel fabrication and in-pile fuel transient test was also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Magnetism in Mixed Valence, Defect, Cubic Perovskites: BaIn 1– x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75. Local and Average Structures

The series BaIn 1–x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75, has been prepared under air-fired and argon-fired conditions and studied using X-ray diffraction, d.c. and a.c. susceptibility, Mössbauer spectroscopy, neutron diffraction, X-ray near edge absorption spectroscopy (XANES), and X-ray pair distribution (PDF) methods. While Ba 2 In 2 O 5 (BaInO 2.5 ) crystallizes in an ordered brownmillerite structure, Ibm2, and Ba 2 Fe 2 O 5 (BaFeO 2.5 ) crystallizes in a complex monoclinic structure, P2 1 /c, showing seven Fe 3+ sites with tetrahedral, square planar, and octahedral environments, all phases studied here crystallize in the cubic perovskite structure, Pm$\bar{}3}$m, with long-range disorder on the small cation and oxygen sites. 57 Fe Mössbauer studies indicate a mixed valency, Fe 4+ /Fe 3+ , for both the air-fired and argon-fired samples. The increased Fe 3+ content for the argon-fired samples is reflected in increased cubic cell constants and in the increased Mössbauer fraction. It appears that the Pm$\bar{}3}$m phases are only metastable when fired in argon. From a slightly modified percolation theory for a primitive cubic lattice (taking into account the presence of random O atom vacancies), long-range spin order is permitted for the x = 0.50 and 0.75 phases. Instead, the d.c. susceptibility shows only zero-field-cooled (ZFC) and field-cooled (FC) divergences at ~6 K [5 K] for x = 0.50 and at ~22 K [21 K] for x = 0.75, with values for the argon-fired samples in [ ]. Neutron diffraction data for the air-fired samples confirm the absence of long-range magnetic order at any studied temperature. For the air-fired x = 0.50, a.c. susceptibility data show a frequency-dependent χ'(max) and spin glass behavior, while for x = 0.75, χ'(max) is invariant with frequency, ruling out either a spin glass or a superparamagnetic ground state. These behaviors are discussed in terms of competing Fe 3+ –Fe 3+ antiferromagnetic exchange and ferromagnetic Fe 3+ –Fe 4+ exchange. The PDF and 57 Fe Mössbauer data indicate a local structure at short interatomic distances, which deviates strongly from the average Pm$\bar{}3}$m model. Fe Mössbauer, PDF, and XANES data show a systematic dependence on x and indicate that the Fe 3+ sites are largely fourfold-coordinated and Fe 4+ sites are fivefold- or sixfold-coordinated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗