Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PENETRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Electron and bremsstrahlung penetration and dose calculation

Various techniques for the calculation of electron and bremsstrahlung dose deposition are described. Energy deposition, transmission, and reflection coefficients for electrons incident on plane slabs are presented, and methods for their use in electron dose calculations were developed. A method using the straight-ahead approximation was also developed, and the various methods were compared and found to be in good agreement. Both accurate and approximate methods of calculating bremsstrahlung dose were derived and compared. Approximation is found to give a good estimate of dose where the electron spectrum falls off exponentially with energy.

Watts, J. W., Jr.↗

The estimation of galactic cosmic ray penetration and dose rates

This study is concerned with approximation methods that can be readily applied to estimate the absorbed dose rate from cosmic rays in rads - tissue or rems inside simple geometries of aluminum. The present work is limited to finding the dose rate at the center of spherical shells or behind plane slabs. The dose rate is calculated at tissue-point detectors or for thin layers of tissue. This study considers cosmic-rays dose rates for both free-space and earth-orbiting missions.

Burrell, M. O.↗

Penetration of retrorocket exhausts into subsonic counterflows.

Simulation experiments were performed in the NASA Langley Full Scale Tunnel to investigate the retroplume heating rates encountered by a lander vehicle during a terminal descent to a planetary surface. A 10% scale model of the Viking Lander with freestream velocity conditions from 37 to 75 ft/sec was used for simulation. The simulation test data were close to the theoretical predictions of Hill et al. (1971).

Jarvinen, P. O.↗

Powered fire nozzle for fast penetration of structures: A concept

Nozzle has been proposed with tip that will punch through wall very quickly. It would allow extinguishing agent to be delivered inside closed structure in minimum amount of time. Two versions of nozzle have been conceived: one operated from hydraulic pressure source and one activated by explosive charge.

Parker, J. F.↗

Water depth penetration film test

As part of the National Aeronautics and Space Administration Earth Resources Program, a comparative and controlled evaluation of nine film-filter combinations was completed to establish the relative effectiveness in recording water subsurface detail if exposed from an aerial platform over a typical water body. The films tested, with one exception, were those which prior was suggested had potential. These included an experimental 2-layer positive color film, a 2-layer (minus blue layer) film, a normal 3-layer color film, a panchromatic black-and-white film, and a black-and-white infrared film. Selective filtration was used with all films.

Lockwood, H. E.↗

An estimate of the influence of sediment concentration and type on remote sensing penetration depth for various coastal waters

Under the assumptions of collimated light, a homogenous water column, zero molecular scattering, and constant ratio of volume scattering function to scattering coefficient, estimates of the remote sensing depth parameter, Z90, are made for various coastal waters at 540 nm. Calculations indicate that sediment concentration and type have a strong influence on remote sensing depth when concentrations are below 5 mg/theta. Above 5 mg/theta, the absorption coefficient of the sediments becomes large in comparison to that of water, causing Z90 values to be less than 2 m with only small differences between various sediment types.

Whitlock, C. H.↗

The penetration of soft electrons into the ionosphere

Calculations are presented of energy spectra and angular and spatial distributions of electron fluxes in the ionosphere resulting from precipitation of monoenergetic (E = 25, 50, and 100 eV) electrons. The incident electrons are assumed to be isotropic over the downward direction. It is found that the resulting steady-state electron fluxes above ca. 300 km are highly anisotropic and that the pitch-angle distribution is energy dependent. About 15% of the incident electrons are backscattered elastically to the protonosphere. A much larger number of electrons escapes after they have deposited part of their energy in the atmosphere. The mean energy of the escaping electrons is about half that of the incident electrons. About 50% of the incident energy is absorbed in the atmosphere, the remainder being returned to the protonosphere. The rate of energy absorption is a maximum at heights between 300 and 400 km. Most of the energy is absorbed in ionization and excitation of atomic oxygen; an appreciable amount is absorbed as heat by the ambient electron gas. Altitude profiles are presented for the rates of ionization, excitation, and electron heating caused by soft-electron precipitation.

Mantas, G. P.↗

Surficial geology of Mars: A study in support of a penetrator mission to Mars

Physiographic and surficial cover information were combined into unified surficial geology maps (30 quadrangles and 1 synoptic map). The surface of Mars is heterogeneous and is modified by wind, water, volcanism, tectonism, mass wasting and other processes. Surficial mapping identifies areas modified by these processes on a regional basis. Viking I mission results indicate that, at least in the landing site area, the surficial mapping based on Mariner data is fairly accurate. This area was mapped as a lightly cratered plain with thin or discontinuous eolian sediment. Analysis of lander images indicates that this interpretation is very close to actual surface conditions. These initial results do not imply that all surficial units are mapped correctly, but they do increase confidence in estimates based on photogeologic interpretations of orbital pictures.

Spudis, P.↗

Radiative flux penetration through a blown shock layer for Jupiter entry conditions

A study is made of the radiative blockage due to carbonaceous ablation injection for a probe entering the Jupiter atmosphere. This is accomplished by calculating the stagnation-point blockage factors for three entry trajectories that account for variations in probe configuration, atmospheric gas composition, and entry conditions. The radiative blockage within the relatively cool ablation layer is shown to be large and to be primarily dependent upon the absorption of the C2 and C3 species. The C3 absorption is significant, particularly when the new experimental data for C3 spectral absorption properties are used. Also, the stagnation-point radiative blockage factors are shown to correlate well in terms of the no-injection radiative heating rates for various entry conditions.

Moss, J. N.↗

The effective penetration distance of ultrahigh-energy electrons and photons traversing a cosmic blackbody photon gas

The effective average energy loss for an energetic (at least about 10 to the 15th power eV) particle traversing the microwave background radiation is evaluated. Electron-photon transformations by Compton scattering and pair production (in photon-photon collisions) are computed, with the energy loss considered to be carried away by the least energetic of the outgoing particles. Considering the most energetic of the outgoing particles as the high-energy particle, the relative probability and mean time for the particle to be a photon or electron (or positron) is evaluated. The effects of synchrotron losses for electrons and positrons are emphasized and compared with Compton losses to determine a critical energy (for given magnetic field) above which synchrotron losses dominate. Magnetic deflections are also treated for the case where the magnetic field is disordered, having a characteristic 'cell' size.

Gould, R. J.↗

Moisture penetration in microcircuit packages

Results of study of hybrid microcircuit packages tested in temperature/humidity environments ranging from 25 C at 98 percent relative humidity (RH) to 85 C at 85 percent RH shows that package susceptibility to moisture is affected more by high temperature than humidity, and room temperature tests are inadequate for testing package seal integrity.

Licari, J. J.↗

On the phase relationship between the energetic particle flux modulation and current disc penetrations in the Jovian magnetosphere - Pioneer 10 inbound

The surface defined by the locus of field minima along field lines for an unterminated Jovian model magnetosphere is found to coincide with the surface of the model current disk which provides a good fit to the data. However, when the model is terminated by means of magnetopause currents, preservation of the fit by modifying the current distribution near the outer edge of the disk causes the minimum absolute magnetic field surface to bifurcate. Energetic electron flux time profiles that are based upon such a minimum absolute magnetic field configuration are found to be qualitatively consistent with the inbound Pioneer 10 data.

Jones, D. E.↗