A procedure to introduce point mutations into the Rubisco large subunit gene in wild-type plants
Not provided.
Plant Sciences↗
SEARCH · Engineering Papers
Results for “ORR”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Porphyrin Aerogel Catalysts for Oxygen Reduction Reaction in Anion-Exchange Membrane Fuel Cells
Platinum group metal (PGM)-free catalysts for oxygen reduction reaction have shown high oxygen reduction reaction activity in alkaline media. In order to further increase the power density of anion-exchange membrane fuel cells (AEMFCs), PGM-free catalysts need to have a high site density to reach high current densities. In this work, synthesis, characterization, and utilization of heat-treated iron porphyrin aerogels are reported as cathode catalysts in AEMFCs. The heat treatment effect is thoroughly studied and characterized using several techniques, and the best performing aerogel is studied in AEMFC, showing excellent performance, reaching a peak power density of 580 mW cm –2 and a limiting current density of as high as 2.0 A cm –2 , which can be considered the state-of-the-art for PGM-free based AEMFCs.
25 ENERGY STORAGE↗
Mitigating Electronic Conduction in Ceria‐Based Electrolytes via External Structure Design
Doped ceria electrolytes are the state of the art low‐temperature solid oxide electrolytes because of their high ionic conductivity and good material compatibility. However, cerium tends to reduce once exposed to reducing environments, leading to an increase in electronic conduction and a decrease in efficiency. Here, the leakage current is mitigated in ceria‐based electrolytes by controlling the defect chemistry through an engineered cathode side microstructure. This functional layer effectively addresses the problematic electronic conduction issue in ceria‐based electrolytes without adding significant ohmic resistance and increases the ionic transference number to over 0.93 in a thin 20 µm ceria‐based electrolyte at 500 °C, compared to a of 0.8 for an unmodified one. Based on this design, solid oxide fuel cells (SOFCs) are further demonstrated with the remarkable peak power density of 550 mW at 500 °C and excellent stability for over 2000 h. This approach enables a potential breakthrough in the development of ceria‐based low‐temperature solid oxide electrolytes.
36 MATERIALS SCIENCE↗
Imaging Light‐Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping
Abstract In recent years, halide perovskite materials have been used to make high‐performance solar cells and light‐emitting devices. However, material defects still limit device performance and stability. Here, synchrotron‐based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr 3 (MA = CH 3 NH 3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light‐induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X‐ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.
36 MATERIALS SCIENCE↗
Correction to: Imaging Light–Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping
Owing to an error in properly normalizing the reconstruction phase data into atomic displacements, the strain values that we used to calculate the root mean squared local strain, ε rms , and to calculate the fraction of the crystals more strain than 1%, f, quoted in the original paper, are roughly one order of magnitude too large. This error was only discovered recently whilst performing further analysis.
36 MATERIALS SCIENCE↗
Creating Favorable Pt/Co Interfaces via a Two‐Step Approach for Constructing Highly Durable PtCo Intermetallic Fuel Cell Catalysts
Structurally ordered PtCo intermetallics are one of the most promising oxygen-reduction catalysts in proton exchange membrane fuel cells (PEMFCs) due to their intrinsically improved catalytic activity and stability relative to PtCo solid-solution alloys. However, increasing the heating temperature to achieve a desirable high degree of ordering results in severe particle agglomeration and low mass activity and stability. Herein, a two-step synthesis approach is developed to create an L1 2 -Pt 3 Co intermetallic structure with an increased ordering degree and well-dispersed ultrafine particles. The first step of the synthesis yields ultrafine Pt nanoparticles that are well-dispersed on the ZIF-8-derived carbon support. The second adsorption step enables us to fine-tune the Pt and Co interfaces, assisted by optimal amino acids, to establish a favorable Co-rich environment around fine Pt nanoparticles, facilitating Co diffusion into the Pt crystalline under mild thermal conditions (<800 °C). In conclusion, this two-step ordered L1 2 -Pt 3 Co catalyst is systematically evaluated using membrane electrode assemblies under heavy-duty vehicle (HDV) conditions and demonstrated exceptional performance and durability, retaining 1.35 A cm -2 only a 7% loss in current density at 0.7 V after an extensive accelerated stress test of 150,000 voltage cycles.
30 DIRECT ENERGY CONVERSION↗
Gamma Radiation-Induced Degradation of Acetohydroxamic Acid (AHA) in Aqueous Nitrate and Nitric Acid Solutions Evaluated by Multiscale Modelling
Acetohydroxamic acid (AHA) has been proposed for inclusion in advanced, single-cycle, used nuclear fuel reprocessing solvent systems for the reduction and complexation of plutonium and neptunium ions. For this application, a detailed description of the degradation of AHA in dilute aqueous nitric acid is required. To this end, we present a comprehensive, multiscale computer model for the coupled radiolytic and hydrolytic degradation of AHA in aqueous sodium nitrate and nitric acid solutions. Rate coefficients for the reactions of AHA and HA with the oxidizing nitrate radical were measured for the first time using pulsed electron radiolysis and used as inputs in the kinetic model. The computer model results are validated by comparison to experimental data from steady state gamma irradiations, for which the agreement is excellent. Here, the presented model accurately predicts the yields of the major degradation products of AHA: acetic acid, hydroxylamine, nitrous oxide, and molecular hydrogen.
11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
Biosorption of copper from aqueous solutions utilizing agricultural wastes
Abstract The purpose of this study was to determine the copper (Cu) biosorption capacities of several agricultural wastes from aqueous solutions. Samples of agricultural wastes were tested unaltered and after hydrochloric acid (HCl) treatment. Additional parameters tested include sample dose, contact time, particle size, mixing temperature, and the concentrations and pH of the Cu solutions. Desorption studies were performed to determine if the removed Cu could be recovered. In addition, tests were conducted to determine if the agricultural waste samples (AWS) could be reused for additional Cu biosorption cycles. The results of this study demonstrate a wide range of Cu biosorption proficiencies ranging from 0% to 100% removal. The parameters that resulted in higher Cu removal include higher pH and lower Cu solution concentration. Desorption results showed a 58% to 86% Cu recovery rate. Three of the five reused AWS were effective at removing Cu during subsequent trials. Therefore, these AWS types can be reused for additional Cu biosorption cycles. Hence, it is possible that using those AWS for metal treatment could reduce hazardous waste disposal inefficiencies and costs by avoiding disposing of spent AWS following each Cu biosorption cycle.
Rizzuti, Anthony M.↗
Exploring non-invertible symmetries in free theories
Symmetries corresponding to local transformations of the fundamental fields that leave the action invariant give rise to (invertible) topological defects, which obey group-like fusion rules. One can construct more general (codimension-one) topological defects by specifying a map between gauge-invariant operators from one side of the defect and such operators on the other side. In this work, we apply such construction to Maxwell theory in four dimensions and to the free compact scalar theory in two dimensions. In the case of Maxwell theory, we show that a topological defect that mixes the field strength F and its Hodge dual *F can be at most an SO(2) rotation. For rational values of the bulk coupling and the θ-angle we find an explicit defect Lagrangian that realizes values of the SO(2) angle φ such that cos φ is also rational. We further determine the action of such defects on Wilson and ’t Hooft lines and show that they are in general non-invertible. We repeat the analysis for the free compact scalar Φ in two dimensions. In this case we find only four discrete maps: the trivial one, a Z 2 map dΦ → –dΦ, a Τ-duality-like map dΦ → i • dΦ, and the product of the last two.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Long-Term Redistribution of Residual Gas Due to Non-convective Transport in the Aqueous Phase
Not provided.
Engineering↗
Differential bone adaptation to mechanical unloading and reloading in young, old, and osteocyte deficient mice
Not Available
59 BASIC BIOLOGICAL SCIENCES↗
Lattice light-sheet microscopy allows for super-resolution imaging of receptors in leaf tissue
Plant leaf tissues are difficult to image via fluorescent microscopy, largely due to the presence of chlorophyll and other pigments that provide large background fluorescence. An advantage of Lattice Light-Sheet microscopy is its use of Bessel beams that illuminate a thin focal region of interest for microscopy, allowing for the excitation of fluorescent molecules within this region without surrounding chlorophyll-like objects outside of the region of interest. Here, we apply STORM Super-resolution techniques to observe Receptor-Like Kinases in Arabidopsis thaliana leaf cells. By applying this technique with the Lattice Light-Sheet, we can localize immune response proteins in sub-100 nm length scales and reconstruct three-dimensional locations of proteins within individual leaf cells. Using this technique, we observed the effect of the elicitors ATP and flg22, where we observed a significant degree of internalization of cognate receptors P2K1 and FLS2. We were also able to similarly observe differences in colocalization due to stimulation with these elicitors, where we observe proteins on the membrane becoming less colocalized as a result of stimulation, suggesting an immune response mechanism involving receptors internalizing via pathways distinct to the receptor. Further, these data show the Lattice Light-Sheet’s capabilities for imaging tissue with problematic background fluorescence that otherwise makes super-resolution fluorescence microscopy difficult.
59 BASIC BIOLOGICAL SCIENCES↗
Control of crystallographic orientation in Ruddlesden-Popper for fast oxygen reduction
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Quantitative multiplexed analysis of gene and protein expression patterns in Yarrowia lipolytica
In this report, we present coordinated observations of protein and mRNA transcript counts at the single-cell level in the oleaginous yeast model Yarrowia lipolytica. The transcription factor Xbp1p regulates entry into a quiescent state, representing a shift of resources to sequestration of nutrients rather than cell division. We observed the responses of wild-type and Δxbp1 cells to protein (by fluorescence) and transcript quantification and localization at both single-cell and population-averaged levels. Data were collected via single-molecule fluorescence in situ hybridization (smFISH) and qPCR under nitrogen depletion, a condition that drives lipid accumulation. These techniques reveal a complex and heterogeneous population of Xbp1p dynamics and downstream regulation. Our findings highlight the need for single-cell resolution analyses to describe cellular dynamics and regulatory processes.
Yarrowia lipolytica↗
Metabolic engineering reveals the relative importance of different sugar catabolic pathways during consumption of plant biomass by Aspergillus niger
To evaluate the impact of individual sugar catabolic pathways on the physiology of A. niger when using plant biomass as a carbon source, key pathways converting plant biomass derived monomers were blocked. The resulting deletion mutants were analyzed using wheat bran and sugar beet pulp as substrates. On both substrates, the strongest affected single-pathway mutants were the pentose catabolic pathway (PCP) (Δ xkiA ) and glycolysis (Δ hxkA Δ glkA ) deficient mutants. On wheat bran, which is rich in pentose sugars, blocking the PCP by deletion of xkiA strongly impacted both growth and gene expression. However, the effect was even stronger in Δ hxkA Δ glkA and similar to a strain in which all pathways were blocked, highlighting the crucial role of glycolysis and/or carbon catabolite repression in A. niger physiology. These results demonstrate the complexity of A. niger metabolism during growth on plant biomass and provide insights into aspects to consider during metabolic engineering to obtain fungal cell factories.
aspergillus niger↗
Enhancement of low-temperature solid oxide fuel cell performance and durability via surface chemistry modification
The development of active cathodes is one of the most critical challenges to lowering the operating temperature for solid oxide fuel cells (SOFCs). Here, in this work, we demonstrated that by modifying the cathode surface chemistry at a relatively low temperature, the cathode activity and durability can be simultaneously enhanced on high-performing, low-temperature cathodes such as (La 0.6 Sr 0.4 ) 0.95 Co 0.2 Fe 0.8 O 3-δ (LSCF) and Sr 0.5 Sm 0.5 CoO 3-δ (SSC). This low-temperature modification using multi-valent cations activates the highly defected surface and maintains the nanoscale electrocatalysts by bypassing the high-temperature sintering procedure for SOFC fabrication. The modified cathode at 600°C shows an order of magnitude reduction in impedance to only 0.05 Ωcm 2 with a peak power density of 1.1 W/cm 2 and increases stability over 2000 h. The combination of in situ characterization, distribution of relaxation time analysis on impedance spectroscopy, and surface chemistry analysis reveals the importance of surface chemistry control on the gas-solid reaction activity and durability and provides the design principle for numerous future solid oxide cells.
25 ENERGY STORAGE↗
Distinctive carbon repression effects in the carbohydrate-selective wood decay fungus Rhodonia placenta
Not Available
59 BASIC BIOLOGICAL SCIENCES↗
Opportunities for large-scale CO2 disposal in coastal marine volcanic basins based on the geology of northeast Hawaii
Not Available
DePaolo, Donald J. (ORCID:0000000188800202)↗