Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OMIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Enhanced ferromagnetic order in Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} featuring canted [MnO{sub 4}]{sub ∞} spin chains of mixed-valent Mn(III)/Mn(IV). Aliovalent substitution of the Sr{sub 4−x}Ln{sub x}Mn{sup III}{sub 2+x}Mn{sup IV}{sub 1−x}O{sub 3}(GeO{sub 4}){sub 3} solid-solution

Crystals of Sr{sub 4−x}Ln{sub x}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} (x=0; x∼0.15 for Ln=La, Pr, Nd, Sm. Eu, Gd, Dy; x∼0.3 for Ln=Gd) were isolated upon using high-temperature, solid-state methods in molten-salt media. These compounds are isostructural with the previously reported Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} (Ln=La, Sm, Gd) series that contains the same [MnO{sub 4}]{sub ∞} spin chains. The synthesis of the Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} (x=0) phase was carried out by a double aliovalent substitution with respect to the Sr{sup 2+} and Ge{sup 4+} ions that replace Na{sup +}/Ln{sup 3+} and As{sup 5+} in Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}, respectively. The title series contains mixed-valent Mn(III)/Mn(IV) and shows a limited range of solid solution, both of which were not observed in the previously reported Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} series. To form the Sr{sub 4−x}Ln{sub x}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} solid solution, one of the Sr{sup 2+} sites, i.e., the original Ln-site in Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}, is partially substituted by Ln{sup 3+} in a statistical disorder of Sr{sub 1−x}/Ln{sub x}. Initial magnetic investigations of selected derivatives reveal higher ferromagnetic ordering temperatures than those reported for the Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3} series, presumably attributed to a lesser degree of canting as a result of introducing non-Jahn–Teller Mn{sup 4+} ions. Also intriguing is the observation of multiple anomalies at low temperatures which appear to be of electronic origins. - Graphical abstract: Sr{sub 4−x}Ln{sub x}Mn(III){sub 2+x}Mn(IV){sub 1−x}O{sub 3}(GeO{sub 4}){sub 3}. Display Omitted - Highlights: • Double aliovalent substitution: Sr{sub 4}Mn{sub 3}O{sub 3}(GeO{sub 4}){sub 3} with respect to Na{sub 3}LnMn{sub 3}O{sub 3}(AsO{sub 4}){sub 3}. • Solid solution with respect to statistical disorder of Sr{sub 1−x}Ln{sub x} in one of the two Sr sites. • Mn{sup 3+}/Mn{sup 4+} magnetic ions are spatially arranged in a triangular kagomé fashion. • Enhanced ferromagnetic ordering attributed to doping non-Jahn–Teller Mn{sup 4+}.

36 MATERIALS SCIENCE↗

Unique (3,8)-connected lanthanide arenedisulfonate metal-organic frameworks containing benzimidazole-5,6-dicarboxylic acid co-ligand: Syntheses, structures and luminescence

Two isostructural 3D lanthanide arenedisulfonate metal-organic frameworks (MOFs) [Ln(Hbidc)(nds){sub 0.5}(H{sub 2}O)]{sub n}(Ln=Eu(1), La(2)) have been successfully synthesized by the hydrothermal reaction of lanthanide oxide with 2,6-naphthalenedisulfonate sodium (Na{sub 2}nds) and an auxiliary ligand, 1H-benzimidazole-5,6-dicarboxylic acid (H{sub 3}bidc). The two complexes are both constructed from 2D [Ln(Hbidc)]{sup +} double layers pillared by nds{sup 2−} ligands to generate 3D (3, 8)-connected open-framework structures with 1D long narrow channels running along the a axis. From topological point of view, the 3D framework is a (3, 8)-connected tfz-d net. The weak interactions including N–H⋯O, O–H⋯O hydrogen bonds and π–π stacking are observed in 1. The 2D IR correlation spectroscopy was applied to study the molecular interactions induced by thermal perturbation. The emission spectra of 1 exhibit the characteristic transition of {sup 5}D{sub 0}→{sup 7}F{sub J}(J=0–4) of Eu(III). - Graphical abstract: Two isostructural 3D (3,8)-connected lanthanide arenedisulfonates were hydrothermally synthesized. The 2D IR correlation spectroscopy was applied to study the molecular interactions induced by thermal perturbation. Display Omitted - Highlights: • The first lanthanide arenedisulfonates incorporating fused-ring aromatic carboxylic acid. • Three-dimensional (3,8)-connected framework with tfz-d network topology. • The emission spectra of 1 exhibit the characteristic transition of {sup 5}D{sub 0}→{sup 7}F{sub J} (J=0–4) of Eu(III). • The 2D IR correlation spectroscopy was applied to study the molecular interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Site and local structure of activator Eu{sup 2+} in phosphor Ca{sub 10−x}(PO{sub 4}){sub 6}Cl{sub 2}:xEu{sup 2+}

The site and local structure of activator Eu{sup 2+} in phosphor Ca{sub 10−x}(PO{sub 4}){sub 6}Cl{sub 2}:xEu{sup 2+} is investigated by experiment measurements, first-principle calculations and XAFS simulations. From first-principle calculations, the “local” structure [bond length L(M–O)≤R(M{sup 2+})+R(O{sup 2−})] of host shows a significant deformation (expansion) when Ca{sup 2+} is substituted by Eu{sup 2+}, and Eu{sup 2+} should prefer 6h site to 4f site in the host. The d→f emission of Eu{sup 2+} at 4f site should show a longer wavelength than that of Eu{sup 2+} at 6h site. The XAFS measurement and simulations suggest that the Eu{sup 2+} in our Ca{sub 9.9}(PO{sub 4}){sub 6}Cl{sub 2}:0.1Eu{sup 2+} sample mainly locates at 6h site. In the emission spectrum, two emission profiles of Ca{sub 9.9}(PO{sub 4}){sub 6}Cl{sub 2}:0.1Eu{sup 2+} sample are obtained and assigned. The major one (2.71 eV≈456 nm) should be the emission of Eu{sup 2+} at 6h site. The minor one (2.61 eV≈465 nm) should be that of Eu{sup 2+} at 4f site. - Graphical abstract: The d→f emission of Eu{sup 2+} in Ca{sub 9.9}(PO{sub 4}){sub 6}Cl{sub 2}:0.1Eu{sup 2+} can be assigned as: emission profile at 2.71 eV and 2.61 eV are Eu{sup 2+} at 6h and 4f site, respectively. Display Omitted - Highlights: • Eu{sup 2+} in Ca{sub 10−x}(PO{sub 4}){sub 6}Cl{sub 2}:xEu{sup 2+} causes deformation to “local” structure. • Eu{sup 2+} should prefer 6h site to 4f site in the host from energy aspect. • Emission at 2.71 eV and 2.61 eV should be Eu{sup 2+} at 6h and 4f site.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and properties of [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} with mixed-valent Ge centers

One new manganese thiogermanate, [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} (dien=diethylenetriamine), was prepared under mild solvothermal conditions and structurally and spectroscopically characterized. The title compound crystallizes in the orthorhombic system, chiral space group P2{sub 1}2{sub 1}2{sub 1} (no. 19) with a=9.113(4) Å, b=12.475(5) Å, c=17.077(7) Å, V=1941.5(15) Å{sup 3} and Z=4. Its structure features a three-dimensional (3D) network composed of a one-dimensional (1D) [Ge{sub 2}S{sub 4}]{sup 2−} anionic chain and a [(dien){sub 2}Mn]{sup 2+} complex interconnected via various hydrogen bonds. The most interesting structural feature of the compound is the presence of two different oxidation states of germanium centers in the 1D [Ge{sub 2}S{sub 4}]{sup 2−} chain, which is also supported by the result of X-ray photoelectron spectroscopy measurement. The optical property of the title compound has also been studied by UV–vis spectra. - Graphical abstract: One new thiogermanate, [(dien){sub 2}Mn]Ge{sub 2}S{sub 4}, contains a one-dimensional [Ge{sub 2}S{sub 4}]{sup 2−} anionic chain with two different oxidation states of germanium centers. Display Omitted - Highlights: • One new manganese thiogermanate [(dien){sub 2}Mn]Ge{sub 2}S{sub 4} was prepared. • The compound features 1D [Ge{sub 2}S{sub 4}]{sup 2−} chain composed of [Ge{sup II}S{sub 4}] and [Ge{sup IV}S{sub 4}] tetrahedra. • The first example of inorganic–organic hybrid thiogermanates with mixed valent Ge centers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of retrapping on the persistent luminescence in strontium silicate orange–yellow phosphor

The orange–yellow long persistent luminescence in Sr{sub 3}SiO{sub 5}:Eu{sup 2+}, Er{sup 3+} with the chromaticity coordination of (0.48, 0.49) can persist for over 20 h above the recognizable intensity level (≥0.32 mcd/m{sup 2}) because of retrapping carriers by the deep traps. The incorporation of Er{sup 3+} into Sr{sub 3}SiO{sub 5}:Eu{sup 2+} generates a large number of shallow traps responsible for the fast decay component as well as deep traps responsible for the decay tail of the LPL. It demonstrates that the retrapping of the carrier released from a trap plays an important role in the persistent luminescence process. - Graphical abstract: LPL decay curves of Sr{sub 3−x−y}SiO{sub 5}:xEu{sup 2+}, yEr{sup 3+} (x=0.0025, y=0, 0.0025). Inset: Orange–yellow emission images recorded using a classic Reflex digital camera with exposure times varying with the persistent luminescence times. Display Omitted - Highlights: • The persistence time of Sr{sub 3}SiO{sub 5}:Eu{sup 2+}, Er{sup 3+} lasts over 20 h above the recognizable intensity level. • The incorporation of Er{sup 3+} into Sr{sub 3}SiO{sub 5}:Eu{sup 2+} generates a large number of shallow traps. • The experimental results provide an evidence for the retrapping process in LPL processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect equilibrium in PrBaCo{sub 2}O{sub 5+δ} at elevated temperatures

A defect equilibrium model for PrBaCo{sub 2}O{sub 5+δ} is suggested based on oxygen non-stoichiometry data. The model includes reactions of oxygen exchange and charge disproportionation of Co{sup 3+} cations. The respective equilibrium constants, enthalpies and entropies for the reactions entering the model are obtained from the fitting of the experimental data for oxygen non-stoichiometry. The enthalpies of oxidation Co{sup 2+}→Co{sup 3+} and Co{sup 3+}→Co{sup 4+} are found to be equal to 115±9 kJ mol{sup –1} and 45±4 kJ mol{sup –1}, respectively. The obtained equilibrium constants were used in order to calculate variations in concentration of cobalt species with non-stoichiometry, temperature and oxygen pressure. - Graphical abstract: Variations in concentration of cobalt species with oxygen content in PrBaCo{sub n}{sup 2+}Co{sub z}{sup 3+}Co{sub p}{sup 4+}O{sub 5+δ} at 650 °S. Display Omitted - Highlights: • The defect equilibrium model based on oxygen non-stoichiometry data is suggested. • Disproportionation of Co{sup 3+} cations gives significant contribution to defect equilibrium. • The hole concentration obtained from the model is in accord with electrical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ammonium–cobalt–nickel phosphates, NH{sub 4}[Co{sub 1−x}Ni{sub x}PO{sub 4}]·H{sub 2}O

The ammonium–cobalt–nickel phosphates, NH{sub 4}[Co{sub 1−x}Ni{sub x}PO{sub 4}]·H{sub 2}O (x=0.00, 0.34, 0.59, 0.70, 1.00), and the deuterated forms, ND{sub 4}[Co{sub 1−x}Ni{sub x}PO{sub 4}]·D{sub 2}O (x=0.00, 0.38, 0.48, 0.69, 0.85), have been synthesized under mild hydrothermal conditions and characterised using X-ray and neutron diffraction, chemical and thermal analysis, and magnetic measurements. Their crystal structures, including hydrogen positions, were determined by Rietveld refinement using single-crystal X-ray and neutron powder diffraction data. The space group of these orthorhombic crystals modifies as a function of their composition. The magnetic susceptibility and magnetization measurements of these ammonium–cobalt–nickel phosphates show antiferromagnetic behaviour, and the Neel temperature evolves from 5.5 K (x=0.00) up to 13.2 K (x=1.00). - Graphical abstract: We obtained single crystals for all the members of the family. In this series, although all crystals are orthorhombic, the space group changes as a function of the composition, showing how the single-crystal diffraction data is capable to manifest structural subtleties that had not been described before for this group of materials. All the investigated materials behave antiferromagnetically with ordering temperatures from 5.5 K up to 13.2 K. Display Omitted - Highlights: • The ammonium–cobalt–nickel phosphates, NH{sub 4}[Co{sub 1−x}Ni{sub x}PO{sub 4}]·H{sub 2}O (x=0.00, 0.34, 0.59, 0.70, 1.00) and the deuterated forms ND4[Co1-xNixPO4]·D{sub 2}O (x=0.00, 0.38, 0.49, 0.68, 0.85) have synthesized by hydrothermal synthesis. • The structural studies of these compounds are introduced as a function of the composition. • The magnetic studies show an antiferromagnetically behavior with ordering temperatures from 5.5 K to 13.2 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bandgap tuning in SrTi(N,O,F){sub 3} by anionic-lattice variation

Polycrystalline SrTiO{sub 3} and SrTi(O,F){sub 3} powders were synthesized by a solid-state reaction. A partial substitution of oxygen by nitrogen was subsequently carried out using thermal ammonolysis resulting in SrTi(N,O){sub 3} and SrTi(N,O,F){sub 3}. Powder X-ray diffraction (XRD) revealed a cubic perovskite structure with space group Pm-3m for all samples. The thermal ammonolysis slightly increased the lattice parameters, crystallite sizes and strain. As a result from the co-substitution of oxygen with nitrogen and fluorine for SrTi(N,O,F){sub 3}, highly distorted TiO{sub 6} octahedra were detected using X-ray absorption near edge structure (XANES) spectroscopy. The weakening of all active modes of the Raman spectra after thermal ammonolysis also indicated enhanced distortions in the local crystal structure. SrTi(N,O,F){sub 3} has the largest amount of nitrogen as well as fluorine among all four samples as determined by thermogravimetric analysis (TGA), elemental analysis and X-ray photoelectron spectroscopy (XPS). In the UV–vis spectra a distinctive shift of the absorption-edge energy was observed exclusively for the SrTi(N,O,F){sub 3} sample from 390 to 510 nm corresponding to a bandgap narrowing from 3.18 to 2.43 eV. - Graphical abstract: Figure shows the shift of the absorption-edge energy for the SrTi(N,O,F){sub 3} sample from 390 to 510 nm corresponding to a bandgap narrowing from 3.18 to 2.43 eV. Display Omitted - Highlights: • Synthesis of phase-pure SrTi(N,O,F){sub 3} via solid-state reaction. • The incorporated nitrogen contents increase by the presence of fluorine in SrTi(N,O,F){sub 3}. • Co-substitution with nitrogen and fluorine is beneficial for the bandgap narrowing compared to by only nitrogen or fluorine substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and luminescence properties of CaY{sub 2−x}Eu{sub x}Ge{sub 3}O{sub 10} (x=0–2)

The novel red emitting phosphors based on CaY{sub 2−x}Eu{sub x}Ge{sub 3}O{sub 10} (x=0–2) have been prepared using both a conventional solid-state reaction and a synthesis route via EDTA-complexing process. Powder XRD study has revealed that CaY{sub 2−x}Eu{sub x}Ge{sub 3}O{sub 10} (x=0.1–0.8, 2.0) crystallizes in the monoclinic space group P2{sub 1}/c, Z=4. The trivalent europium ions occupy three different sites (4e) with the C{sub 1} symmetry. The phosphors exhibit a strong red emission under excitations at 250 nm and 393 nm. The light emission efficiency depends on the excitation wavelength, the activator content and the method of synthesis. Appropriate CIE chromaticity coordinates for CaY{sub 1.7}Eu{sub 0.3}Ge{sub 3}O{sub 10} are x=0.54 and y=0.29. - Graphical abstract: The room temperature PL and PLE spectra of CaY{sub 1.2}Eu{sub 0.8}Ge{sub 3}O{sub 10} annealed at different temperatures. Display Omitted - Highlights: • The novel red emitting phosphors based on CaY{sub 2−x}Eu{sub x}Ge{sub 3}O{sub 10} have been prepared. • Effect of synthesis conditions on the surface morphology and luminescence properties of CaY{sub 2−x}Eu{sub x}Ge{sub 3}O{sub 10} has been studied. • Optimum dopant concentrations and annealing temperature have been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Eu{sup 3+} activated monoclinic, perovskite, and garnet compounds in the Gd{sub 2}O{sub 3}–Al{sub 2}O{sub 3} phase diagram as efficient red-emitting phosphors

Eu{sup 3+} doped Gd{sub 4}Al{sub 2}O{sub 9} (GdAM), GdAlO{sub 3} (GdAP), and Gd{sub 3}Al{sub 5}O{sub 12} (GdAG, containing 10 at% of Lu{sup 3+} for lattice stabilization) have been developed in this work as efficient red-emitting phosphors. With coprecipitated carbonate precursors, phase evolution studies found minimum processing temperatures of ∼1000, 1100, and 1300 °C for the three phosphors to crystallize as pure phases, respectively. Compared with their yttrium aluminate counterparts, the gadolinium-based phosphors exhibit red-shifted O{sup 2−}–Eu{sup 3+} charge transfer excitation band (CTB) centers due to the lower electronegativity of Gd{sup 3+} and appreciably higher quantum yields of photoluminescence owing to the occurrence of efficient Gd{sup 3+}→Eu{sup 3+}energy transfer. The optimal Eu{sup 3+} contents were determined to be ∼7.5 at% for GdAM and 5.0 at% for both GdAP and GdAG, and concentration quenching of luminescence was suggested to be due to exchange interactions. Fluorescence decay analysis found a shorter lifetime for the phosphor powder processed at a higher temperature or with a higher Eu{sup 3+} content, and the underlying mechanism was discussed. Fluorescence lifetimes were also compared between the yttrium and gadolinium phosphor systems for the dominant emissions. - Graphical abstract: Eu{sup 3+} doped Gd{sub 4}Al{sub 2}O{sub 9} (GdAM), GdAlO{sub 3} (GdAP), and Gd{sub 3}Al{sub 5}O{sub 12} (GdAG, containing 10 at% of Lu{sup 3+} for lattice stabilization) have been developed as efficient red-emitting phosphors. Owing to the Gd{sup 3+} to Eu{sup 3+} energy transfer, improved luminescence is observed for the compounds than their yttrium-based counterparts. Display Omitted - Highlights: • Eu{sup 3+} doped Gd{sub 4}Al{sub 2}O{sub 9}, GdAlO{sub 3} and (Gd{sub 0.9}Lu{sub 0.1}){sub 3}Al{sub 5}O{sub 12} developed as red phosphors. • Improved red-emissions than their yttrium-based counterparts confirmed. • Efficient Gd{sup 3+}→Eu{sup 3+}energy transfer observed. • Applications in various lighting, display, and scintillation areas expected.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu-doping effect on dielectric properties of organic gel synthesized Ba{sub 4}YMn{sub 3−x}Cu{sub x}O{sub 11.5±δ}

Copper doped-Ba{sub 4}YMn{sub 3−x}Cu{sub x}O{sub 11.5±δ} samples were synthesized by an organic gel assisted citrate process. X-ray diffraction of compositions with x=0.002, 0.005, 0.01, 0.02 and 0.04 does not reveal any change of hexagonal perovskite structure on doping. The effects of Cu-doping on the microstructure and dielectric properties were investigated. Cu doping modifies the electrical properties at the level of the impedance characteristics of both grain and grain boundary and to understand these different behaviours, we have carried out high-resolution transmission electron microscopy analysis. Among the Ba{sub 4}YMn{sub 3−x}Cu{sub x}O{sub 11.5±δ} specimens studied, the composition x=0.002 shows a permittivity (ε′{sub r}) higher than the undoped compound and a lower loss tangent (tanδ) over several orders of magnitude of frequency. - Graphical abstract: Highlighting of many stacking faults (intergrowths) in substituted compounds with x>0.01 (right picture), which could explain the different dielectric properties observed in these compounds. However compounds with x>0.01 remain with a better stacking sequence as we can see on the left picture. Display Omitted - Highlights: • High permittivity of the Ba{sub 4}YMn{sub 3−x}Cu{sub x}O{sub 11.5±δ}. • Substitution leads to a mixed oxidation state for manganese: Mn{sup 4+}/Mn{sup 3+}. • Creation of oxygen vacancies which are responsible for stacking faults. • Highlighting relationship between Cu substitution and dielectric properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hole mobility enhancement of Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} bulks

Cu-deficient Cu{sub 1.75}ZnSn{sub 1−x}Al{sub x}Se{sub 4} (x=0–0.6) bulks were prepared by a liquid-phase reactive sintering method at 600 {sup °}C with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring electrical properties of Al-doped CZTSe as a function of dopant concentration. Al-CZTSe pellets at x=0.4 with electrical conductivity of 57.2 S cm{sup −1} showed the highest hole mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. The high mobility is mainly contributed from the low atomic scattering factor of Al. The high carrier concentration and slightly changed lattice parameter of Al-CZTSe are related to the types of its defects. - Graphical abstract: The controls in electrical properties and the changes in lattice parameters of Cu-deficient Cu{sub 2}ZnSnSe{sub 4} by doping Al{sup 3+} on the Sn{sup 4+} site. Display Omitted - Highlights: • Cu-deficient Cu{sub 1.75}Zn(Sn{sub 1−x}Al{sub x})Se{sub 4} was prepared by liquid-phase sintering at 600 °C. • Sintering aids of Sb{sub 2}S{sub 3} and Te were used for reactive sintering. • Al-CZTSe at x=0.4 showed the extremely high mobility of 32.5 cm{sup 2} V{sup −1} s{sup −1}. • Al-CZTSe reached large grains of 2−3 μm, while it was <1.0 μm for the undoped. • Electrical properties of Al-CZTSe pellets changed with the Al content.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic structure and magnetic properties of LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} nanocrystalline electrode materials

The process of sol–gel synthesis was applied to obtain LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} nanopowders. The samples were characterized by following methods: X-ray diffraction (XRD), scanning electron microscopy (SEM/EDX), X-ray photoelectron spectroscopy (XPS) and SQUID magnetometry. XPS was used to examine the chemical composition and oxidation state of manganese, in particular the Mn{sup 3+}/Mn{sup 4+} ratio from the deconvolution of the complex Mn3p lines. The size of the grains and crystallites were independently obtained from SEM images and XRD patterns, respectively. In all the cases a critical interplay of electronic (Mn{sup 3+}/Mn{sup 4+} ratio), structural (unit cell volume) and magnetic properties was observed depending on the synthesis process. - Graphical abstract: SEM image of Li{sub 0.79}Ni{sub 0.41}Mn{sub 1.35}O{sub 4.45} sample. Display Omitted - Highlights: • LiMn{sub 1.5}M{sub 0.5}O{sub 4} (M=Al, Mg, Ni, Fe) and LiMn{sub 2}O{sub 4}/TiO{sub 2} obtained by sol–gel method. • XRD method was used to determine the crystal structure. • SEM/EDX imaging have been done. • XPS electronic structure was examined and discussed. • Experimental effective magnetic moment and the calculated one were compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structures and phase transitions in Sr doped Ba{sub 2}InTaO{sub 6} perovskites

The crystal structures of the double perovskites of the type Ba{sub 2−x}Sr{sub x}InTaO{sub 6} have been studied by synchrotron X-ray and neutron powder diffraction methods. The structures are based on ordered array of the tilted InO{sub 6} and TaO{sub 6} octahedra, with the Ba/Sr cations being completely disordered. The structure evolves from cubic to monoclinic Fm3{sup ¯}m→{sup x∼0.6}I4/m→{sup x∼1.2}I2/m→{sup x∼1.6}P2{sub 1}/n. The changes in the symmetry induced by replacing the Ba with Sr have been identified by a symmetry-mode analysis. Variable temperature S-XRD studies of selected examples have shown that heating the samples induces the same sequence of transitions observed in the composition dependent studies. - Graphical abstract: The evolution of the structure of the B-site ordered perovskites has been determined by high resolution powder diffraction. The nature of the transitions are probed by examination of the symmetry-adapted modes. Display Omitted - Highlights: • Synthesis of Ba{sub 2−x}Sr{sub x}InTaO{sub 6} cation ordered perovskites. • Synchrotron X-ray and neutron diffraction structural studies of Ba{sub 2−x}Sr{sub x}InTaO{sub 6}. • Phase transitions in Ba{sub 2−x}Sr{sub x}InTaO{sub 6}. • Symmetry-adapted mode analysis of phase transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamic estimation: Ionic materials

Thermodynamics establishes equilibrium relations among thermodynamic parameters (“properties”) and delineates the effects of variation of the thermodynamic functions (typically temperature and pressure) on those parameters. However, classical thermodynamics does not provide values for the necessary thermodynamic properties, which must be established by extra-thermodynamic means such as experiment, theoretical calculation, or empirical estimation. While many values may be found in the numerous collected tables in the literature, these are necessarily incomplete because either the experimental measurements have not been made or the materials may be hypothetical. The current paper presents a number of simple and relible estimation methods for thermodynamic properties, principally for ionic materials. The results may also be used as a check for obvious errors in published values. The estimation methods described are typically based on addition of properties of individual ions, or sums of properties of neutral ion groups (such as “double” salts, in the Simple Salt Approximation), or based upon correlations such as with formula unit volumes (Volume-Based Thermodynamics). - Graphical abstract: Thermodynamic properties of ionic materials may be readily estimated by summation of the properties of individual ions, by summation of the properties of ‘double salts’, and by correlation with formula volume. Such estimates may fill gaps in the literature, and may also be used as checks of published values. This simplicity arises from exploitation of the fact that repulsive energy terms are of short range and very similar across materials, while coulombic interactions provide a very large component of the attractive energy in ionic systems. Display Omitted - Highlights: • Estimation methods for thermodynamic properties of ionic materials are introduced. • Methods are based on summation of single ions, multiple salts, and correlations. • Heat capacity, entropy, lattice energy, enthalpy, Gibbs energy values are available.

36 MATERIALS SCIENCE↗

Four homochiral coordination polymers contain N-acetyl-L-tyrosine and different N-donor ligand: Influence of metal cations, ancillary ligands and coordination modes

Using the chiral ligand N-acetyl-L-tyrosine (Hacty) and maintaining identical reaction conditions, Zn(II), Co(II), and Cd(II) salts provided four novel homochiral coordination polymers ([Zn(acty)(bipy){sub 2}(H{sub 2}O){sub 2}]·NO{sub 3}·2H{sub 2}O){sub n}1, ([Co(acty)(bipy){sub 2}(H{sub 2}O){sub 2}]·NO{sub 3}·2H{sub 2}O){sub n}2, ([Cd(acty){sub 2}(bipy)H{sub 2}O]·H{sub 2}O){sub n}3, and ([Cd(acty)(bpe){sub 2}(Ac)]·6H{sub 2}O){sub n}4 (bipy=4,4′-bipyridine; bpe=1,2-di(4-pyridyl)ethane) in the presence of ancillary ligands. Compounds 1 and 2 are isostructural 1D chain structures. The neighboring chains are further linked into a 3D supramolecular structure via π⋯π stacking and hydrogen bond interactions. Compound 3 shows a 2D network and 4 generates 1D infinite chains along the c-axis. Compounds 3 and 4 are further connected into 3D supramolecular network by hydrogen bond interactions. More importantly, coordination in acyl oxygen atoms and ancillary ligands (bpe) as monodentate decorating ligands in 4 are rarely reported. Ancillary ligands and metal cations significantly influence the structure of the complexes. The photoluminescence properties of 1, 3, and 4 were studied at room temperature. Circular dichroism (CD) of the complexes have been investigated. - Graphical abstract: Four new homochiral coordination polymers were prepared and structurally characterized, which investigate the influence of the ancillary ligands and metal ions on the design and synthesis of coordination polymers. Display Omitted - Highlights: • It is rarely reported that the chiral coordination polymers prepared with N-acetyl-L-tyrosine ligands. • The alkalescent acetyl oxygen atom is difficult to participate in coordination but it is happened in the N-acetyl-L-tyrosine ligands. • The ancillary ligands (4,4′-bipy and bpe) are present in an unusual coordination modes, monodentate decorating ligands in 1, 2 and 4. • Structure comparative analyses results indicate that the secondary ligands and metal ions influence the fabrication of these inorganic–organic arrangements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coligand-regulated assembly, fluorescence, and magnetic properties of Co(II) and Cd(II) complexes with a non-coplanar dicarboxylate

A non-coplanar dicarboxylate ndca (H{sub 2}ndca=5-norbornene-2,3-dicarboxylic acid), combining with various dipyridyl-typed tectons, constructs six Cd(II)/Co(II) coordination polymers under hydrothermal conditions, namely [Co(ndca)(H{sub 2}O)]{sub n} (1), ([Co(ndca)(bpe)(H{sub 2}O)]·H{sub 2}O){sub n} (2), [Co(ndca)(bpa){sub 0.5}(H{sub 2}O)]{sub n} (3), [Cd(ndca)(bpe)(H{sub 2}O)]{sub n} (4), ([Cd(ndca)(bpa)(H{sub 2}O)]·0.5H{sub 2}O){sub n} (5), and ([Cd(ndca)(bpp) (H{sub 2}O)]·H{sub 2}O){sub n} (6) (bpe=1,2-di(4-pyridyl)ethylene, bpa=1,2-bi(4-pyridyl)ethane, and bpp=1,3-bis(4-pyridyl)propane). All these compounds contain various metal(II)–carboxylate motifs, including carboxylate binuclear (2, 4, 5), carboxylate chain (1, 6) and carboxylate layer (3), which are further extended by dipyridyl-typed coligands to afford a vast diversity of the structures with 2D pyknotic layers (1, 6), 2D open layer (5), 2D→3D interpenetrated networks (2,4), and 3D pillared-layer framework (3), respectively. In addition, fluorescent spectra of Cd(II) complexes and magnetic properties of Co(II) complexes are also given. - Graphical abstract: Six various cadmium(II)/cobalt(II)–organic frameworks were constructed by 5-norbornene-2,3-dicarboxylic acid and different bis(pyridine) rod-like tectons, and Cd (II) complexes exhibit blue–violet emissions, whereas Co (II) complexes show antiferromagnetic behaviours. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallinity and compositional changes in carbonated apatites: Evidence from {sup 31}P solid-state NMR, Raman, and AFM analysis

Solid-state (magic-angle spinning) NMR spectroscopy is a useful tool for obtaining structural information on bone organic and mineral components and synthetic model minerals at the atomic-level. Raman and {sup 31}P NMR spectral parameters were investigated in a series of synthetic B-type carbonated apatites (CAps). Inverse {sup 31}P NMR linewidth and inverse Raman PO{sub 4}{sup 3−}ν{sub 1} bandwidth were both correlated with powder XRD c-axis crystallinity over the 0.3–10.3 wt% CO{sub 3}{sup 2−} range investigated. Comparison with bone powder crystallinities showed agreement with values predicted by NMR and Raman calibration curves. Carbonate content was divided into two domains by the {sup 31}P NMR chemical shift frequency and the Raman phosphate ν{sub 1} band position. These parameters remain stable except for an abrupt transition at 6.5 wt% carbonate, a composition which corresponds to an average of one carbonate per unit cell. This near-binary distribution of spectroscopic properties was also found in AFM-measured particle sizes and Ca/P molar ratios by elemental analysis. We propose that this transition differentiates between two charge-balancing ion-loss mechanisms as measured by Ca/P ratios. These results define a criterion for spectroscopic characterization of B-type carbonate substitution in apatitic minerals. - Graphical abstract: Carbonated apatite shows an abrupt change in spectral (NMR, Raman) and morphological (AFM) properties at a composition of about one carbonate substitution per unit cell. Display Omitted - Highlights: • Crystallinity (XRD), particle size (AFM) of carbonated apatites and bone mineral. • Linear relationships among crystallinity, {sup 31}P NMR and Raman inverse bandwidths. • Low and high carbonated apatites use different charge-balancing ion-loss mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗