Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

An optimization model for the US Air-Traffic System

A systematic approach for monitoring U.S. air traffic was developed in the context of system-wide planning and control. Towards this end, a network optimization model with nonlinear objectives was chosen as the central element in the planning/control system. The network representation was selected because: (1) it provides a comprehensive structure for depicting essential aspects of the air traffic system, (2) it can be solved efficiently for large scale problems, and (3) the design can be easily communicated to non-technical users through computer graphics. Briefly, the network planning models consider the flow of traffic through a graph as the basic structure. Nodes depict locations and time periods for either individual planes or for aggregated groups of airplanes. Arcs define variables as actual airplanes flying through space or as delays across time periods. As such, a special case of the network can be used to model the so called flow control problem. Due to the large number of interacting variables and the difficulty in subdividing the problem into relatively independent subproblems, an integrated model was designed which will depict the entire high level (above 29000 feet) jet route system for the 48 contiguous states in the U.S. As a first step in demonstrating the concept's feasibility a nonlinear risk/cost model was developed for the Indianapolis Airspace. The nonlinear network program --NLPNETG-- was employed in solving the resulting test cases. This optimization program uses the Truncated-Newton method (quadratic approximation) for determining the search direction at each iteration in the nonlinear algorithm. It was shown that aircraft could be re-routed in an optimal fashion whenever traffic congestion increased beyond an acceptable level, as measured by the nonlinear risk function.

Mulvey, J. M.↗

Using Hough harmonics to validate and assess nonlinear shallow-water models

The implementation of a technique for locating programming errors in shallow-water codes, establishing the correctness of the code, and assessing the performance of the numerical model under various flow conditions is described. The right-hand side of the differential equations is modified in such a way that the exact solution of the nonlinear initial-value problem is known, so that the truncation errors of the numerical scheme can be studied in detail. The exact solution is prescribed to be any linear combination of Hough harmonics which propagate in time according to their natural frequencies.

Dee, Dick P.↗

Multiscale Static Analysis of Notched and Unnotched Laminates Using the Generalized Method of Cells

The generalized method of cells (GMC) is demonstrated to be a viable micromechanics tool for predicting the deformation and failure response of laminated composites, with and without notches, subjected to tensile and compressive static loading. Given the axial [0], transverse [90], and shear [+45/-45] response of a carbon/epoxy (IM7/977-3) system, the unnotched and notched behavior of three multidirectional layups (Layup 1: [0,45,90,-45](sub 2S), Layup 2: [0,60,0](sub 3S), and Layup 3: [30,60,90,-30, -60](sub 2S)) are predicted under both tensile and compressive static loading. Matrix nonlinearity is modeled in two ways. The first assumes all nonlinearity is due to anisotropic progressive damage of the matrix only, which is modeled, using the multiaxial mixed-mode continuum damage model (MMCDM) within GMC. The second utilizes matrix plasticity coupled with brittle final failure based on the maximum principle strain criteria to account for matrix nonlinearity and failure within the Finite Element Analysis--Micromechanics Analysis Code (FEAMAC) software multiscale framework. Both MMCDM and plasticity models incorporate brittle strain- and stress-based failure criteria for the fiber. Upon satisfaction of these criteria, the fiber properties are immediately reduced to a nominal value. The constitutive response for each constituent (fiber and matrix) is characterized using a combination of vendor data and the axial, transverse, and shear responses of unnotched laminates. Then, the capability of the multiscale methodology is assessed by performing blind predictions of the mentioned notched and unnotched composite laminates response under tensile and compressive loading. Tabulated data along with the detailed results (i.e., stress-strain curves as well as damage evolution states at various ratios of strain to failure) for all laminates are presented.

GMC↗

Nonlinear structure formation in flat cosmological models

This paper describes the formation of nonlinear structure in flat (zero curvature) Friedmann cosmological models. We consider models with two components: the usual nonrelativistic component that evolves under gravity and eventually forms the large-scale structure of the universe, and a uniform dark matter component that does not clump under gravity, and whose energy density varies with the scale factor a(t) like a(t)(sup -n), where n is a free parameter. Each model is characterized by two parameters: the exponent n and the present density parameter Omega(sub 0) of the nonrelativistic component. The linear perturbation equations are derived and solved for these models, for the three different cases n = 3, n is greater than 3, and n is less than 3. The case n = 3 is relevant to model with massive neutrinos. The presence of the uniform component strongly reduces the growth of the perturbation compared with the Einstein-de Sitter model. We show that the Meszaros effect (suppression of growth at high redshift) holds not only for n = 4, radiation-dominated models, but for all models with n is greater than 3. This essentially rules out any such model. For the case n is less than 3, we numerically integrate the perturbation equations from the big bang to the present, for 620 different models with various values of Omega(sub 0) and n. Using these solutions, we show that the function f(Omega(sub 0), n) = (a/delta(sub +))d(delta)(sub +)/da, which enters in the relationship between the present density contrast delta(sub 0) and peculiar velocity field u(sub 0) is essentially independent of n. We derive approximate solutions for the second-order perturbation equations. These second-order solutions are tested against the exact solutions and the Zel'dovich approximation for spherically symmetric perturbations in the marginally nonlinear regime (the absolute value of delta is less than or approximately 1). The second-order and Zel'dovich solutions have comparable accuracy, significantly higher than the accuracy of the linear solutions. We then investigate the dependence of the delta(sub 0) - u(sub 0) relationship upon the value of n in the nonlinear regime using the second-order solutions for marginally nonlinear, general perturbations, and the exact solutions for strongly nonlinear, spherically symmetric perturbations. In both cases, we find that the delta(sub 0) - u(sub 0) relationship remains independent of n. We speculate that this result extends to strongly nonlinear, general perturbations as well. This eliminates any hope to determine the presence of the uniform component or the value of n using dynamical methods. Finally, we compute the nonlinear evolution of the skewness of the distribution of values of delta, assuming Gaussian initial conditions. We find that the skewness is not only independent of n, but also of Omega(sub 0). Thus the skewness cannot be used to discriminate among various models with Gaussian initial conditions. However, it can be used for testing the Gaussianity of the initial conditions themselves. We conclude that the uniform component leaves no observable signature in the present large-scale structure of the universe. To determine its presence and nature, we must investigate the relationship between the past and present universe, using redshift-dependent tests.

Martel, Hugo↗

A computer program for predicting nonlinear uniaxial material responses using viscoplastic models

A computer program was developed for predicting nonlinear uniaxial material responses using viscoplastic constitutive models. Four specific models, i.e., those due to Miller, Walker, Krieg-Swearengen-Rhode, and Robinson, are included. Any other unified model is easily implemented into the program in the form of subroutines. Analysis features include stress-strain cycling, creep response, stress relaxation, thermomechanical fatigue loop, or any combination of these responses. An outline is given on the theoretical background of uniaxial constitutive models, analysis procedure, and numerical integration methods for solving the nonlinear constitutive equations. In addition, a discussion on the computer program implementation is also given. Finally, seven numerical examples are included to demonstrate the versatility of the computer program developed.

Chang, T. Y.↗

Simulation of double layers in a model auroral circuit with nonlinear impedance

A reduced circuit description of the U-shaped potential structure of a discrete auroral arc, consisting of the flank transmission line plus parallel-electric-field region, is used to provide the boundary condition for one-dimensional simulations of the double-layer evolution. The model yields asymptotic scalings of the double-layer potential, as a function of an anomalous transport coefficient alpha and of the perpendicular length scale l(a) of the arc. The arc potential phi(DL) scales approximately linearly with alpha, and for alpha fixed phi (DL) about l(a) to the z power. Using parameters appropriate to the auroral zone acceleration region, potentials of phi (DPL) 10 kV scale to projected ionospheric dimensions of about 1 km, with power flows of the order of magnitude of substorm dissipation rates.

Smith, R. A.↗

Nonlinear viscoelastic characterization of thin polyethylene film

In order to understand the state of stress and strain in a typical balloon fabricated from thin polyethylene film, experiment data in the literature reviewed. It was determined that the film behaves as a nonlinear viscoelasticity material and should be characterized accordingly. A simple uniaxial, nonlinear viscoelastic model was developed for predicting stress given a certain strain history. The simple model showed good qualitative agreement with results of constant rate, uniaxial accurately predicting stresses for cyclic strain histories typical of balloon flights. A program was outlined which will result in the development of a more complex nonlinear viscoelastic model.

Wilbeck, J. S.↗

Shell Models of RMHD Turbulence and the Heating of Solar Coronal Loops

A simplified nonlinear numerical model for the development of incompressible magnetohydrodynamics in the presence of a strong magnetic field B|| and stratification, nicknamed 'Shell-Atm,' is presented. In planes orthogonal to the mean field, the nonlinear incompressible dynamics is replaced by two-dimensional shell models for the complex variables u and b, allowing one to reach large Reynolds numbers while at the same time carrying out sufficiently long integrations to obtain good statistics at moderate computational cost. The shell models of different planes are coupled by Alfve'n waves propagating along B||. The model may be applied to open or closed magnetic field configurations where the axial field dominates and the plasma pressure is low; here we apply it to the specific case of a magnetic loop of the solar corona heated by means of turbulence driven by photospheric motions, and we use statistics for its analysis. The Alfven waves interact nonlinearly and form turbulent spectra in the directions perpendicular and, through propagation, also parallel to the mean field. A heating function is obtained and shown to be intermittent; the average heating is consistent with values required for sustaining a hot corona and is proportional to the aspect ratio of the loop to the -1.5 power, and haracteristic properties of heating events are distributed as power laws. Crosscorrelations show a delay of dissipation compared with energy content.

corona↗

A mathematical simulation model of the CH-47B helicopter, volume 2

A nonlinear simulation model of the CH-47B helicopter, was adapted for use in a simulation facility. The model represents the specific configuration of the variable stability CH-47B helicopter. Modeling of the helicopter uses a total force approach in six rigid body degrees of freedom. Rotor dynamics are simulated using the Wheatley-Bailey equations, steady state flapping dynamics and included in the model of the option for simulation of external suspension, slung load equations of motion. Validation of the model was accomplished by static and dynamic data from the original Boeing Vertol mathematical model and flight test data. The model is appropriate for use in real time piloted simulation and is implemented on the ARC Sigma IX computer where it may be operated with a digital cycle time of 0.03 sec.

Weber, J. M.↗

A mathematical simulation model of the CH-47B helicopter, volume 1

A nonlinear simulation model of the CH-47B helicopter was adapted for use in the NASA Ames Research Center (ARC) simulation facility. The model represents the specific configuration of the ARC variable stability CH-47B helicopter and will be used in ground simulation research and to expedite and verify flight experiment design. Modeling of the helicopter uses a total force approach in six rigid body degrees of freedom. Rotor dynamics are simulated using the Wheatlely-Bailey equations including steady-state flapping dynamics. Also included in the model is the option for simulation of external suspension, slung-load equations of motion.

Weber, J. M.↗

Backward differentiation approximations of nonlinear differential/algebraic systems

Finite-difference approximations of dynamical systems modeled by nonlinear, semiexplicit, differential/algebraic equations are analyzed. Convergence for the backward differentiation method is proved for index two and index three problems when the numerical initial values obey certain constraints. The appropriate asymptotic convergence rates and the leading error terms are determined.

Brenan, Kathryn E.↗

A fixed H-infinity controller for a supermaneuverable fighter performing the Herbst maneuver

This paper presents an H-infinity flight control system design case study for a supermaneuverable fighter flying the Herbst maneuver. The Herbst maneuver presents an especially challenging flight control problem because of its large ranges of airspeed, angle of attack and angular rates. A fixed H-infinity controller has been developed via the mixed-sensitivity problem formulation for 20 linearized models representing the maneuver. Both linear and nonlinear full model evaluations indicate that this single H-infinity controller together with a fixed LQR inner loop feedback have achieved 'robust stability' and 'robust performance' for the entire maneuver without gain scheduling.

Chiang, R. Y.↗

The Fringe-Imaging Skin Friction Technique PC Application User's Manual

A personal computer application (CXWIN4G) has been written which greatly simplifies the task of extracting skin friction measurements from interferograms of oil flows on the surface of wind tunnel models. Images are first calibrated, using a novel approach to one-camera photogrammetry, to obtain accurate spatial information on surfaces with curvature. As part of the image calibration process, an auxiliary file containing the wind tunnel model geometry is used in conjunction with a two-dimensional direct linear transformation to relate the image plane to the physical (model) coordinates. The application then applies a nonlinear regression model to accurately determine the fringe spacing from interferometric intensity records as required by the Fringe Imaging Skin Friction (FISF) technique. The skin friction is found through application of a simple expression that makes use of lubrication theory to relate fringe spacing to skin friction.

Zilliac, Gregory G.↗

Investigations into the triggered lightning response of the F106B thunderstorm research aircraft

An investigation has been conducted into the lightning characteristics of the NASA F106B thunderstorm research aircraft. The investigation includes analysis of measured data from the aircraft in the time and frequency domains. Linear and nonlinear computer modelling has also been performed. In addition, new computer tools have been developed, including a new enhanced nonlinear air breakdown model, and a subgrid model useful for analyzing fine details of the aircraft's geometry. Comparison of measured and calculated electromagnetic responses of the aircraft to a triggered lightning environment are presented.

Rudolph, Terence H.↗

Insolation and the Precession Index

Simple nonlinear climate models yield a precession index-like term in the temperature. Despite its importance in the geologic record, the precession index e sin omega, where e is the Earth's orbital eccentricity and omega is the Sun's perigee in the geocentric frame, is not present in the insolation at the top of the atmosphere. Hence there is no one-for-one mapping of 23,000 and 19,000 year periodicities from the insolation to the paleoclimate record; a nonlinear climate model is needed to produce these periods. Two such models, a grey body and an energy balance climate model with an added quadratic term, produce e sin omega terms in temperature. These terms, which without feedback mechanisms achieve extreme values of about plus or minus 0.48 K for the grey body and plus or minus 0.64 K for the energy balance model, simultaneously cool one hemisphere while they warm the other. Moreover, they produce long-term cooling in the northern hemisphere when the Sun's perigee is near northern solstice and long-term warming in the northern hemisphere when the perigee is near southern solstice. Thus this seemingly paradoxical mechanism works against the standard model which requires cool northern summers (Sun far from Earth in northern summer) to build up northern ice sheets, so that if the standard model is correct it may be more efficient than previously thought. Alternatively, the new mechanism could possibly be dominant and indicate southern hemisphere control of the northern ice sheets, wherein the southern oceans undergo a long-term cooling when the Sun is close to the Earth during southern summer. The cold water eventually flows north, cooling the northern hemisphere. This might explain why the northern oceans lag the southern ones when it comes to orbital forcing.

Rubincam, David Parry↗

Prediction of High-Lift Flows using Turbulent Closure Models

The flow over two different multi-element airfoil configurations is computed using linear eddy viscosity turbulence models and a nonlinear explicit algebraic stress model. A subset of recently-measured transition locations using hot film on a McDonnell Douglas configuration is presented, and the effect of transition location on the computed solutions is explored. Deficiencies in wake profile computations are found to be attributable in large part to poor boundary layer prediction on the generating element, and not necessarily inadequate turbulence modeling in the wake. Using measured transition locations for the main element improves the prediction of its boundary layer thickness, skin friction, and wake profile shape. However, using measured transition locations on the slat still yields poor slat wake predictions. The computation of the slat flow field represents a key roadblock to successful predictions of multi-element flows. In general, the nonlinear explicit algebraic stress turbulence model gives very similar results to the linear eddy viscosity models.

Rumsey, Christopher L.↗

Bifurcation and stability of low-order steady flows in horizontally and vertically forced convection

A nonlinear spectral model of two-dimensional, shallow Boussinesq convection which responds to heating in both the horizontal and vertical directions is examined. The governing partial differential system is converted to an infinite set of ordinary differential equations and truncated to a small set to permit detailed study of the number and types of transitions from one flow configuration to another. The Hadley number and the Rayleigh number are defined as the horizontal and vertical thermal forcing mechanisms, respectively, for inclusion in the nonlinear spectral model, which is composed of three equations. The model is then used to describe steady states, linearly stable solutions, and balancing factors in unstable stratification. The number and the distribution of the steady states are found to be qualitatively independent of the aspect ratio and the Prandtl number.

Yost, D. A.↗

A compressible model for the simulation of moist mountain waves

A two-dimensional, nonlinear, nonhydrostatic model is described which allows the calculation of moist airflow in mountainous terrain. The model is compressible, uses a terrain-following coordinate system, and employs lateral and upper boundary conditions which minimize wave reflections. The model's accuracy and sensitivity are examined. These tests suggest that in numerical simulations of vertically propagating, highly nonlinear mountain waves, a wave absorbing layer does not accurately mimic the effects of wave breakdown and dissipation at high levels in the atmosphere. In order to obtain a correct simulation, the region in which the waves are physically absorbed must generally be included in the computational domain (a nonreflective upper boundary condition should be used as well). The utility of the model is demonstrated in two examples (linear waves in a uniform atmosphere and the Jan. 11, 1972 Boulder windstorm) which illustrate how the presence of moisture can influence propagating waves. In both cases, the addition of moisture to the upstream flow greatly reduces the wave response.

Durran, D. R.↗