Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Surrogate Models for TREAT Transient Calculations

The Transient Reactor Test Facility (TREAT) at Idaho National Laboratory (INL) is currently preparing for resumption of operation after more than 20 years in a long-term standby state. In parallel with preparation for operations and a new transient testing program, the DOE-NE Advanced Modeling and Simulation program (NEAMS) has been supporting the development of three-dimensional transient multi-physics modeling capabilities within the reactor physics application MAMMOTH [1]. Recently, the MAMMOTH reactor physics team has begun development of uncertainty and sensitivity analysis for the TREAT core. This research will be used to support the analysis of reactor operation and experiment planning. Traditional approaches, i.e., Monte Carlo simulations, for such tasks require a large number of model evaluations under both steady state and transient conditions. However, exhaustive sets of sampling runs are simply not practical here since evaluations of each model can take a substantial amount of time. A solution to this problem is to build a surrogate model employing a smaller number of model evaluations. The surrogate model is designed to provide an accurate and fast approximation to the detailed TREAT model. In this manner, the surrogate model can be used in place of the TREAT transient model for uncertainty and sensitivity analysis at a fraction of the computational cost. The high dimensional model representation (HDMR) [2] method is employed here for approximating the responses of interest in terms of functions of lower dimensions. This method has been implemented in RAVEN [3] and all TREAT transient calculations are performed using the multiphysics code MAMMOTH. In addition, a code interface has also been developed in order to couple RAVEN with MAMMOTH. The surrogate model is then tested and compared for the MAMMOTH model of the TREAT startup testing program Transient Test #15 core [4], and its accuracy is measured by its ability to estimate the mean, coefficient of variance, skewness, excess kurtosis and probability density function of the outputs of Transient Test #15 model, as well as root mean square error metric.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

BISON High Burnup Structure Modeling Capabilities Validated with a Selection of the Halden IFA-650 Rods

The U.S. Department of Energy (DOE)’s Nuclear Energy Advanced Modeling and Simulation (NEAMS)program aims to develop predictive capabilities using computational methods for the analysis and design of advanced reactor and fuel cycle systems. This program has been supporting the development of BISON, a high-fidelity and high-resolution fuel performance tool at the engineering scale. This document continues analysis and refinement of capabilities added to BISON early this calendar year in regards to the incorporation of capabilities applicable to extended burnups in response to industry interest. Details are provided on high burnup thermal conductivity models, a refitting of the high-burnup structure (HBS) porosity formation model to include additional data, the coupling of the HBS volume fraction model to thermal conductivity and fine fragmentation models, and validation activities. The IFA-650.4 and IFA-650.9 loss of coolant accident (LOCA) analyses are revisited with the latest developments in this report. A new validation case, IFA-650.14 has also been added to the BISON test suite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BISON Capability, Validation and Demonstration for Reactivity-Initiated Accidents

Reactivity Initiated Accidents (RIA) are design basis accidents that could have adverse impacts on the core coolability. In the unlikely event that sufficient reactivity is inserted into the reactor core by the ejected/dropped control rod, prompt energy deposition into the fuel can occur, which when sufficiently high can lead to fuel rod failure or, at large energy deposition levels, expulsion of UO2 fragments or molten UO2 material from the fuel rod. This results in a release of fission product and fuel into the coolant and has the potential to compromise core coolability and threatening the pressure boundary of the primary coolant system. The design basis RIA is one of the industry challenging problems that the CASL aimed to address; the CASL RIA Challenge Problem Charter [1] states, ?The Pressurized Water Reactor (PWR) Rod Ejection Accident (REA) and Boiling Water Reactor (BWR) Control Rod Drop Accident (CRDA) are postulated accidents with consequences that are important to nuclear safety (fuel rod integrity and core coolability). Currently each reload core design must be analyzed to meet regulatory acceptance criteria. The goal of CASLs ModSim capability for RIA is to model the event at a higher fidelity, with validation to existing tests, to better model the transient neutronics and the progression of the fuel and cladding thermal-mechanical behavior. These improved analytical capabilities can be used to better inform reload core design, limits on fuel assembly discharge burnup, restrictions on placement of fuel in the reactor, control rod insertion limits, operating margin, and performance sensitivities.? In support of that charter, BISON, the fuel performance code has been used to demonstrate the simulation of thermal-mechanical behavior of LWR fuels during a reactivity-initiated accident. The combination of mechanical, thermal, and thermal-hydraulic phenomena all present during an RIA makes a multi-physics code such as BISON a valuable tool for modeling these scenarios. This paper will highlight many of the activities associated with BISON relevant to reactivity-initiated accident capability development and validation efforts. These efforts have been performed under both CASL and the Nuclear Energy Advanced Modeling and Simulation (NEAMS) programs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Overview of the U.S. DOE advanced fuels campaign

Advanced Fuel Campaign (AFC) has responsibility to develop advanced nuclear fuel technologies for the Fuel Cycle Research and Development (FCRD) program. AFC focus areas include 4 topics: advanced LWR fuels, actinide transmutation, research infrastructure development for the study of new nuclear fuels and advanced modeling and simulation. This paper reviews the latest technical advances in the 4 topics. Fuel and cladding materials under investigation include the following general classes of technologies: iron-based cladding, ceramic cladding, coated Zirconium alloy cladding, molybdenum-based cladding, high-density fuel, fully ceramic matrix fuel, and metallic alloy-based nuclear fuel. Concerning actinide transmutation fuel alloy additions to immobilize the lanthanide fission products, sodium-free annular fuel concepts, and cladding coatings and liners for mitigation of fuel-cladding chemical interaction have been investigated. Direct casting of metallic fuel into a zirconium liner was demonstrated. A Talos Transmission Electron Microscope was acquired for the study of advanced nuclear fuels and materials. The conceptual and preliminary designs for a static capsule, a flowing water loop, and a flowing sodium loop to support future transient testing needs have been completed. AFC interfaces with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to develop multi-scale, multi-physics fuel performance codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Multiscale modeling for high burnup structure formation and associated pulverization

This report summarizes the lower length scale modeling work performed in the fiscal year 2023 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to capture the microstrutural evolution and associated pulverization criteria in the high burnup regions. This year, the resolution mechanisms within the cluster dynamics code has been updated and it influence on the bubble growth in HBS regions at the mesoscale is studied. To improve the accuracy of phase-field models of fission gas bubble growth, a new Helmholtz free energy for high-density Xe gas is derived from a virial equation of state. Two previously used strategies for representing net vacancy production in phase-field models of fission gas bubble growth are compared with each other and with analytical models of bubble growth. The vacancy source only model is found to be more convenient to parameterize realistically compared with the vacancy source+sink model. Furthermore, the phase-field-fracture simulation have been performed using MD- informed failure stress values and realistic HBS structure obtained from the phase-field simulations. We also present the uncertainty bands on prediction of the critical stress to account for the effect of the lower length scale variabilities on the failure criteria at the mesoscale. It is observed that pulverization may occur in partially restructured regions with restructuring fraction as low as 17%. In light of this, an update to the BISON’s pulverization criteria is recommended.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Orientation-Dependent Surface Faceting in UO{sub 2}

The surface behavior of UO{sub 2} plays an important role throughout the lifetime of this widely-used commercial nuclear fuel, from manufacturing to waste storage. UO{sub 2} surface properties affect fuel swelling behavior by determining the morphology, size and distribution of fission gas bubbles. Additionally, UO{sub 2} surface characteristics influence fracture behavior, which is controlled by the thermodynamics of fracture surfaces. Therefore, detailed understanding of the fundamental surface behavior will help advance prediction of the fuel performance of UO{sub 2}. Due to significant anisotropy in surface tension, faceting features form after annealing in both UO{sub 2} and many other crystalline materials. Knowledge of the correlation between crystallographic orientation and surface faceting features will expand the fundamental knowledge of UO{sub 2} surface characteristics, leading to a better understanding of fission gas swelling and fracture mechanisms. Inherent characterization technique limited previous studies on the crystallographic orientation of UO{sub 2} surface facets to low Miller index surfaces in single crystal specimens. In this study, synchrotron Laue microdiffraction was utilized to examine the crystallographic orientation of grains on the coarse surface of a polycrystalline UO{sub 2} specimen. The results were then compared with the surface morphology, obtained from scanning electron microscopy (SEM), so that a general correlation between the surface faceting features and crystallographic orientation in UO{sub 2} can be established. Both the fundamental surface characteristics and the crystallographic orientation measurements obtained in this study help advance the experiment validation of MARMOT, a mesoscale multi-physics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. The MARMOT code is an indispensable component of the MOOSE-BISON-MARMOT (MBM) code suite that has been developed by Idaho National Laboratory to enable next generation fuel performance modeling capability as a part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program Fuels Product Line (FPL). In this study, the surface-faceting features of UO{sub 2} were found to be dominated by the triple-plane structure and its variants. With this knowledge, by measuring the directions of the <110> edges, the crystallographic orientation of a surface UO{sub 2} grain can be precisely deduced in most regions of the standard stereogram triangle (SST) of the surface normal. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tailored Microstructure and Properties in UO{sub 2}

Advanced fuels with enhanced safety margin and accident tolerance are of vital importance for safe operation of current light water reactor fleet and the development of future reactor systems. The current UO{sub 2} fuel for LWRs has low thermal conductivity, which will be further reduced upon burn-up. The intrinsically low thermal transfer efficiency of the oxide fuels results in a large temperature gradient within the fuel pellet and high center-line temperature. Thermal swelling of the pellets and fission product accommodation and retention limit the lifetime of UO{sub 2} fuel in the reactor, presenting the great challenges for extending burn-up, effective utilization of nuclear resources and minimization of nuclear waste accumulation. Critical needs also exist in developing accident tolerant fuels that can tolerate loss of coolant accident or improve fuel performance under regular operation or beyond design scenario. Key properties of advanced fuels include high thermal conductivity, oxidation resistance, high temperature mechanical properties, fission gas retention capability and thus improved accident tolerance. The US Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is developing science-based next generation fuel performance modeling capability as part its Fuel Product Line in order to facilitate the predictive capability of nuclear fuel performance and assist the design and analysis of reactor systems. Critical experimental data are needed to validate MARMOT models, particularly on effective thermal transport, fracture mechanisms, grain growth kinetics and fission gas behavior. The fabrication of sintered fuel pellets with well-controlled microstructure is prerequisite to establish the correlation of the microstructure features and fuel behavior in order to develop high fidelity fuel performance models. In this talk, recent advancements on developing advanced UO{sub 2} fuels and properties improvement are overviewed with the emphasis on different accident tolerant fuel (ATF) concepts and tailoring microstructures for MARMOT validation. Current efforts on ATFs include composite fuels and high-density fuels to improve thermal-mechanical properties and fission gas retention capabilities. Different composite UO{sub 2} fuels are fabricated with heterogeneous phases as sintering additives for microstructure and property control, and the potential application of the composites as advanced fuels with enhanced accident tolerance will be discussed. In addition, recent progresses of using field-assisted sintering technologies, specifically spark plasma sintering (SPS), in tailoring and engineering fuel matrix as the target systems for validating MARMOT physics models will be highlighted. Particularly, monolithic UO{sub 2} with tailored microstructure including grain size across multiple length scales from nano-metered to micron-sizes, porosity and stoichiometry can be sintered. The impacts of tailored microstructure on thermal-mechanical properties and grain growth kinetics are discussed within the context of the MARMOT modeling. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Critical Experiments to Benchmark Moderator Temperature Reactivity Worth

The simulation of nuclear reactors requires being able to accurately model several different interrelated physical processes including neutronics, heat production, fluid/thermal physics, structural mechanics, fuel behavior, chemistry, and balance-of-plant. In order to design and use new types of nuclear reactors, modern codes have been developed which couple together the behavior of these different physical models to accurately consider the feedback effects between different physical effects. The SHARP toolset, part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project, is an example of an effort to combine models of neutronics, thermal-hydraulics, and structural mechanics in a coupled simulation to model any type of nuclear reactor as accurately as possible. The validation of multi-physics coupling techniques requires new experimental benchmark experiments specifically designed for that purpose. As a preliminary step towards design of these experiments, a series of measurements have been performed to demonstrate the temperature-dependent neutronic behavior of a well-characterized reactor assembly for comparison with the available codes. The facility adopted for these experiments is Walthousen Reactor Critical Facility (RCF) at Rensselaer Polytechnic Institute (RPI). The RCF is unique in several aspects and provides several advantages to this type of experiment. Built in 1954 by the American Locomotive Company (ALCO), the RCF has been used to design small compact reactors. RPI acquired the facility in 1963, and the highly-enriched uranium fuel was later swapped for low-enriched fuel pins that were excess from the SPERT facility experiments. Nowadays, The RCF is regarded as a teaching and research facility, permitting the training of licensed Senior Reactor Operators, and offering a critical experiments laboratory course to students. The reactor core standard configuration consists of 332 or 333 UO{sub 2} fuel pins, containing a total of 35.2 grams of U- 235 each (4.81 % enriched). The pins are arranged in a regular lattice with a pitch of 1.6256 cm. The number and configuration of these pins are flexible, and the reactor's overall thermal power is limited to no more than 15 W. As the low thermal output of the reactor does not induce any measurable temperature changes, the effect of temperature in the reactor is observed by applying two 18- kW electric heaters to the water moderator, with mechanical agitators to maintain uniformity in moderator temperature. Before beginning experiments, each fuel pin inside the core was surveyed for mechanical defects (bending or warping) that may contribute to uncertainty in core behavior. Every fuel pin has been individually removed from the core and checked for any irregularities on its surface (caused by shocks or usage). About 12 % of the 333 pins were found to have a small degree of warping and were replaced with excess pins available in the facility. In doing this, we made sure all the pins are identical, thereby increasing the accuracy of future models. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulations of a Helical Tube Bundle in Cross-Flow for Application to Flow-Induced Vibration

Helical tubes have been used in a number of systems, including the energy and chemical processing industries. Helical-Coil Steam Generators (HCSGs) in particular have special application in systems for which spatial constraints are important. Variants of these designs are notably included in a number of integral-vessel small modular reactor (SMR) designs which are currently in development by multiple companies. These designs typically have the primary side located within the vessel, with the secondary side flowing upward through the helical tubes. One complexity in implementing an HCSG within the reactor pressure vessel is that any potential flow-induced vibration (FIV) can impact reactor safety. In a typical power plant, heat exchanger tube failures caused by FIV can be costly, but generally do not have immediate impact on the core safety due to their relative isolation from the core area. In an integral-vessel design, a tube rupture could eject material from the secondary side into the primary flow, potentially damaging the core itself or other crucial components. Thus a higher degree of confidence in predicting and/or preventing FIV should be attained for implementing the helical tubes in these designs. A significant campaign is currently underway to address the topic of FIV in helical tube arrays. The U.S. Department of Energy, under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) initiative, has deemed this a 'high-impact problem'. This will include both experimental and computational contributions from a consortium consisting of multiple universities, industry partners, and national laboratories, including Argonne National Laboratory. The primary industrial partner is NuScale, which will see direct benefits from this initiative to the development of their SMR and its component design. The primary focus of this paper is to establish some of the computational efforts that have been made to this stage and the initial benchmarking of computational tools. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Dakota Uncertainty Quantification Methods Applied to the CFD code Nek5000

Predictive modeling and simulation of the performance of a nuclear reactor and its fuel is a challenging task because of the large number of coupled physical phenomena that must be addressed. In addition to this intrinsic complexity, model uncertainty must be accounted for in any analysis if the model will be used to facilitate design or operational decisions which may impact safety and performance. Rigorous, structured uncertainty analyses are performed by first characterizing the model's input uncertainties and, by propagating the uncertainty through the model in order to estimate the output's uncertainty. This paper presents the state of advancement of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) project to characterize the uncertainty of the CFD code Nek5000 using the Dakota package. Nek5000 is a high order spectral element computational fluid dynamics (CFD) code developed at Argonne National Laboratory for high resolution spectral-filtered large eddy simulations (LESs) and unsteady Reynolds averaged Navier-Stokes (RANS) simulations. The Dakota package developed at Sandia National Laboratory can be integrated with many scientific and engineering codes to facilitate efficient, effective uncertainty quantification (UQ) and sensitivity analyses. Dakota is designed to interface with external packages/codes such as Nek5000 through a script-driven interface called fork. Such interface provides maximum flexibility to the users for pre- and post-processing tasks preceding and following each function evaluation. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Uncertainty and Sensitivity Analysis of TREAT Transient Test no. 15

The U.S. Department of Energy (DOE) is preparing for the resumption of transient testing using the Transient Reactor Test Facility (TREAT) located at the Idaho National Laboratory (INL). In order to support the analysis of TREAT operation and experiment planning, the MAMMOTH reactor physics team has recently begun development of uncertainty and sensitivity analysis for the TREAT core simulated via MAMMOTH. MAMMOTH is a high-fidelity three-dimensional transient multi-physics code developed at INL under the DOE-NE Advanced Modeling and Simulation program (NEAMS). This research is part of the development presenting some initial uncertainty and sensitivity analysis of TREAT Transient Test no. 15. In this summary, we employ the Sobol sampling strategy implemented in RAVEN to efficiently perform the sensitivity and uncertainty analysis. The idea is using Sobol functional decomposition with generalized polynomial chaos (gPC) expansions to estimate the responses of interest. The gPC coefficients are then computed via the sparse grid spectral projection method. In addition, this strategy includes evaluation of the second or higher order sensitivity indices, allowing the study of interactions between several input variables. The principal focus of this analysis is to quantify the uncertainties in the total power and maximum fuel temperatures with respect to uncertainties in the initial transient conditions, such as rated power, fuel temperature, graphite fuel density and control rod boron concentration. In addition, both the first order and second order time-dependent sensitivity indices are computed and analyzed. The results show that the interactions between initial control rod boron concentration and the rated power will contribute at most 1% to the total uncertainty of the power peak.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Simulation of the RPI Reactor Critical Facility Core Using High-Fidelity Neutronics Code PROTEUS

The PROTEUS code is a high-fidelity three-dimensional (3D) deterministic neutron transport code developed by ANL under the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. The code contains the SN2ND (second order discrete ordinates method) and two MOC transport solvers, MOCFE and MOCEX (first order methods of characteristics), based on unstructured finite element meshes which allow users to model complex or unconventional geometry reactor problems. Among the two MOC solvers which normally perform better than SN for heterogeneous geometry problems, MOCEX is based on a rigorous formulation using the two-dimensional (2D) MOC radially and the discontinuous Galerkin finite element method axially to overcome the drawbacks of MOCFE with the full 3D MOC representation which requires enormous memory and computational efforts. The Reactor Critical Facility (RCF), an open tank research reactor at the Rensselaer Polytechnic Institute (RPI), became operational in 1956 under the American Locomotive company and has been operating using low-enriched uranium fuel pins, which makes it the only university research facility to use fuel rods similar to operating commercial light water reactors (LWRs). This paper presents modeling and simulation results of the RCF using PROTEUS for code verification and validation which also supports an ongoing NEUP project in which a set of benchmark validation experiments for multiphysics coupling is being developed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Verification of High-Fidelity Neutronics Code PROTEUS for C5G7 Benchmark Problems

Under the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the 3D whole core transport code PROTEUS has been developed at Argonne National Laboratory to perform the detailed 3D transport calculation for various reactor types including irregular or complex geometric reactors. PROTEUS includes two distinct transport solvers: SN and MOC. Among them, the MOC solver based on the extruded geometry, thus named MOCEX, can produce the faithful 3-D transport solutions by employing the rigorous and robust 2D/3D MOC formulation. This formulation overcomes the drawbacks of a full 3D MOC method requiring enormous memory and computational resources and resolves the instability issues of the 2D/1D method as well. The solution of MOCEX converges to that of a Monte Carlo code as the discretization of angle, space and energy is refined, unlike the 2D/1D method. As a verification and validation (V and V) effort of PROTEUS-MOCEX, this paper presents verification test results using the well-known 3D C5G7 benchmark problems by solving and comparing eigenvalues and pin powers with MCNP solutions.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Surrogate Models for TREAT Transient Calculations

The Transient Reactor Test Facility (TREAT) at Idaho National Laboratory (INL) is currently preparing for resumption of operation after more than 20 years in a long-term standby state. In parallel with preparation for operations and a new transient testing program, the DOENE Advanced Modeling and Simulation program (NEAMS) has been supporting the development of three-dimensional transient multi-physics modeling capabilities within the reactor physics application MAMMOTH. Recently, the MAMMOTH reactor physics team has begun development of uncertainty and sensitivity analysis for the TREAT core. This research will be used to support the analysis of reactor operation and experiment planning. Traditional approaches, i.e., Monte Carlo simulations, for such tasks require a large number of model evaluations under both steady state and transient conditions. However, exhaustive sets of sampling runs are simply not practical for TREAT since evaluations of each model can take a substantial amount of time. A solution to this problem is to build a surrogate model employing a smaller number of model evaluations. The surrogate model is designed to provide an accurate and fast approximation to the detailed TREAT model. In this manner, the surrogate model can be used in place of the TREAT transient model for uncertainty and sensitivity analysis at a fraction of the computational cost. The high dimensional model representation (HDMR) method is employed here for approximating the responses of interest in terms of functions of lower dimensions. This method has been implemented in RAVEN and all TREAT transient calculations are performed using the multiphysics code MAMMOTH. In addition, a code interface has also been developed in order to couple RAVEN with MAMMOTH. The surrogate model is then tested and compared for TREAT startup testing program Transient Test no. 15 core, and its accuracy is measured by its ability to estimate the mean, coefficient of variance, skewness, excess kurtosis and probability density function of the outputs of Transient Test no. 15 model, as well as root mean square error metric.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Implementation of CMFD Acceleration Scheme in PROTEUS-MOC

The PROTEUS-MOC code is a three-dimensional (3D) transport code, which is being developed at Argonne National Laboratory under the DOE-NE's Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. It provides a fully consistent 3D discretization of the transport equation by combining the two-dimensional (2D) method of characteristics (MOC) for the planar direction with the discontinuous Galerkin method for the treatment of the axial variable. PROTEUS-MOC uses the unstructured finite element method (FEM) and thus allows the explicit representation of any extruded geometries. It also has a capability of massively parallel computation in energy group, angle, plane, and space using a top-level GMRES linear algebra solver. For parallel computation in space, it uses an unstructured domain decomposition by adapting METIS. The computational burden for direct heterogeneous core calculations based on unstructured geometries is excessive for practical reactor problems, and hence it is essential to implement an efficient acceleration scheme in PROTEUS-MOC. Recently, the coarse mesh finite difference (CMFD) method, which was originally applied to the nodal diffusion methods, has been successfully applied to the MOC transport solvers, resulting in a remarkable reduction in the number of fission source iterations. In addition, a modified CMFD method has been developed to overcome the limitation of the conventional CMFD that is applicable only to neutronics solvers with a conservative discretization. This CMFD method was derived to be consistent with the FEM, which is based on a nonconservative discretization. In this method, the neutron balance in each coarse mesh is enforced by introducing a pseudo absorption cross section (PAXS), and the well-established alternating solution process of CMFD and transport calculations is employed to accelerate source convergence. This modified CMFD acceleration scheme was adopted in PROTEUS-MOC to accelerate the fission source iteration. Pin-cell and assembly based CMFD schemes have been implemented by defining individual pin cells or assemblies as a coarse mesh. For this, an algorithm to map the finite elements to coarse meshes was developed, and the routines were developed to determine the coupling coefficients and PAXS of the CMFD equations from the transport solution. Preliminary performance tests were carried out using the C5G7 benchmark problem. This paper presents the main features of this CMFD acceleration scheme and the preliminary test results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MOOSE framework enhancements for meshing reactor geometries

MOOSE is an open-source, parallel finite element framework designed to permit rapid development of robust multi-physics modeling capabilities. Under the DOE-NEAMS program, numerous solvers have been developed utilizing the open-source MOOSE framework for multiphysics reactor analysis. These solvers require input finite element meshes representing the discretized geometry. Typically, reactor analysts turn to licensed external tools for creation of reactor geometry meshes. Recently, enhancements have been added to the MOOSE framework to mesh common reactor geometries and improve MOOSE-based application user workflows. Support for hexagonal pins, assemblies, and cores has been added, and Cartesian support has been extended. Options for modeling static and rotating control drums within a hexagonal assembly are now available. Pin, assembly, and plane regions can be identified through automatically applied tags on the mesh called 'reporting IDs' for easier post- processing of physics results. An external open-source triangle routine has been leveraged within MOOSE to mesh core periphery zones. A set of reactor geometry builder routines further streamline the construction of hexagonal and Cartesian cores and include the ability to assign materials to regions during mesh generation. The new meshing routines are available through the MOOSE framework in the open-source 'Reactor' module, and the resulting directly within MOOSE-based applications or exported as Exodus II files for use in other finite element solvers. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Release of a High Temperature Engineering Test Reactor (HTTR) Steady State Multiphysics Model to the Virtual Test Bed

In response to climate change, global governments and private industry have established a common goal of achieving net-zero emissions by 2050 \cite{osti_1865910}. This goal requires a reassessment of current energy demands and production methods. Reducing emissions at an affordable cost while maintaining grid reliability requires a nationwide collaborative effort among government and industry in the United States. Nuclear power is the leading low-carbon electricity generation method. In the past 50 years, the use of nuclear power has reduced carbon dioxide emissions by over 60 gigatons and has played a crucial role in the security of energy supply~\cite{IEA}. In the U.S., nuclear power accounts for 20\% of the electrical supply and provides energy reliably. Advanced reactors will operate at higher temperatures, operate more efficiently, utilize more energy stored within fuel, and reduce the amount of waste produced \cite{osti_1616270}. To face these challenges and goals, the U.S. Department of Energy has created an initiative to focus on the modeling and simulation tools to support future nuclear power plant design, licensing, and operations. The Virtual Test Bed (VTB)~\cite{vtb2023} was launched by the National Reactor Innovation Center (NRIC) in collaboration with the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to support the advanced nuclear reactor community. The VTB involves teams from both Idaho National Laboratory and Argonne National Laboratory and aims to provide example models for a broad range of both current and future advanced reactor designs. A feature of the VTB is the automatic testing of these models to ensure continued functionality as simulation tools are further developed. The VTB and the advanced reactor models documented there are important resources for this initiative. This work describes the inclusion of a new model on the VTB---a High Temperature Engineering Test Reactor (HTTR) steady-state model \cite{LABOURE2023109838}.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗