Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Structural analysis of a (Pt/Co){sub 3}/IrMn multilayer: Investigation of sub-nanometric layers by tomographic atom probe

The structure of a Ta{sub 3nm}/[(Pt{sub 2nm}/Co{sub 0.4nm}){sub 3}/IrMn{sub 7nm}]{sub 7}/Pt{sub 10nm} multilayer exhibiting perpendicular exchange bias has been investigated by x-ray reflectometry and laser-assisted tomographic atom probe (LATAP). A strong intermixing at the Co/IrMn interface is pointed out by x-ray reflectometry, this interface being more diffuse than the IrMn/Pt interface. A direct observation of this intermixing at the atomic scale is obtained thanks to the LATAP in real space. The three-dimensional reconstructions reveal the atomic planes in the Pt layers and the Pt-Co intermixing in the (Pt/Co){sub 3} multilayer. The analysis of the concentration profiles allows to determine the chemical composition of the Co subnanometric layers; thus providing for the first time an accurate structural characterization of such layers leading to an estimation of their thickness, roughness, atomic concentration and width of their interfaces.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nested multilayered X pinches for generators with mega-ampere current level

A symmetric X pinch configuration that is conducive to using large numbers of wires on {>=}1 MA pulsed power generators has been tested at 1 MA. Using an initial configuration of wires before their twisting, similar to nested cylindrical wire arrays, enables a geometrically simple, compact, multilayer wire configuration at the X pinch crossing region. Multilayer X pinches with the same or different materials in the inner and outer wire layers were tested. Optimization resulted in X pinch radiation sources with peak power comparable to the most successful single layer X pinch, but with a compact, single bright X radiation source more reliably obtained using the nested configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

He ion irradiation damage in Al/Nb multilayers

We investigate the evolution of microstructure and mechanical properties of sputter-deposited Al/Nb multilayers with miscible fcc/bcc type interface and individual layer thickness, h, of 1-200 nm, subjected to helium ion irradiations: 100 keV He{sup +} ions and a fluence of 6x10{sup 16}/cm{sup 2}. Helium bubbles, 1-2 nm in diameter, are observed. When h is greater than 25 nm, hardnesses of irradiated multilayers barely change, whereas radiation hardening is more significant at smaller h. Transmission electron microscopy and scanning transmission electron microscopy studies reveal the formation of a thin layer of Nb{sub 3}Al intermetallic phase along the Al/Nb interface as a consequence of radiation induced intermixing. The dependence of radiation hardening on h is interpreted by using a composite model considering the formation of the hard Nb{sub 3}Al intermetallic layer.

36 MATERIALS SCIENCE↗

Tunable self-organization of nanocomposite multilayers

In this letter we report the controlled growth and microstructural evolution of self-assembled nanocomposite multilayers that are induced by surface ion-impingement. The nanoscale structures together with chemical composition, especially at the growing front, have been investigated with high-resolution transmission electron microscopy. Concurrent ion impingement of growing films produces an amorphous capping layer 3 nm in thickness where spatially modulated phase separation is initiated. It is shown that the modulation of multilayers as controlled by the self-organization of nanocrystallites below the capping layer, can be tuned through the entire film.

36 MATERIALS SCIENCE↗

Determination of layer-thickness variation in periodic multilayer by x-ray reflectivity

A method basically determining individual layer thicknesses in actual periodic multilayers has been developed, that solves simultaneous equations of positions of peaks appearing in wavelet transform curve of x-ray grazing incidence reflectivity. The determination was demonstrated on a Ni/C periodic multilayer fabricated by magnetron sputtering. Using the layer thicknesses obtained by the method, further accurate of thickness, roughness, and density of each layer was performed by Parratt's model. The special feature that the topmost and bottom-most layers were thicker than other layers was clearly observed. The former is attributed to oxidation and the latter is attributed to the effect of deposition on thick substrate. The mean fluctuations of other layers are 2.6% in C layers and 4.2% in Ni layers attributed to random fluctuations at deposition. Numerical analysis and statistical hypothesis tests have been carried out to discuss noncumulative and cumulative layer-thickness fluctuations in fabrication process.

36 MATERIALS SCIENCE↗

The New ESRF Multilayer Facility: Progress and Perspectives

In view of the increasing need for high quality multilayer based x-ray optics the ESRF decided to upgrade its multilayer facility. During the last years a new deposition system was designed, installed, and commissioned. Since 2008 the new laboratory is operational and has produced its first optical elements for ESRF beamlines. The deposition system is based on magnetron sputtering and can cover optical surfaces up to 1000x150 mm{sup 2} with uniform or graded coatings. Four cathodes allow the use of conducting, insulating, and ferromagnetic target materials. This work will provide an overview on the machine conception and its overall performance, including a comparison with the formerly used system. It will be complemented by first fabrication results and perspectives for future projects in the framework of the ESRF Upgrade Programme.

43 PARTICLE ACCELERATORS↗

A Soft X-ray Spectrometer using a Highly Dispersive Multilayer Grating

There is a need for higher resolution spectrometers as a tool for inelastic x-ray scattering. Currently, resolving power around R = 10,000 is advertised. Measured RIXS spectra are often limited by this instrumental resolution and higher resolution spectrometers using conventional gratings would be prohibitively large. We are engaged in a development program to build blazed multilayer grating structures for diffracting soft x-rays in high order. This leads to spectrometers with dispersion much higher than is possible using metal coated-gratings. The higher dispersion then provides higher resolution and the multilayer gratings are capable of operating away from grazing incidence as required. A spectrometer design is presented with a total length 3.8 m and capable of 10{sup 5} resolving power.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Single-material multilayer with enhanced photoactivity

Molybdenum trioxide (MoO{sub 3}) patterned at the nanometer scale is combined with the same material in its bulk form to produce Bragg mirrors with enhanced photoactive properties. MoO{sub 3} undergoes coloration with exposure to UV light but a multilayer structure which alternates between nanostructured and bulk MoO{sub 3} is 2.5 times more effective. Measurements with various multilayer arrangements suggest the proximity of bulk and nanostructured MoO{sub 3} favors the photoreaction with structural water. A possible minor contribution from electronic band shifting is also discussed.

36 MATERIALS SCIENCE↗

Ferromagnetic resonance study of Co/Pd/Co/Ni multilayers with perpendicular anisotropy irradiated with helium ions

We present a ferromagnetic resonance (FMR) study of the effect of helium ion irradiation on the magnetic anisotropy, the linewidth and the Gilbert damping of a Co/Ni multilayer coupled to Co/Pd bilayers. The perpendicular magnetic anisotropy decreases linearly with He ion fluence, leading to a transition to in-plane magnetization at a critical fluence of 5x10{sup 14} ions/cm{sup 2}. We find that the damping is nearly independent of fluence but the FMR linewidth at fixed frequency has a maximum near the critical fluence, indicating that the inhomogeneous broadening of the FMR line is a nonmonotonic function of the He ion fluence. Based on an analysis of the angular dependence of the FMR linewidth, the inhomogeneous broadening is associated with spatial variations in the magnitude of the perpendicular magnetic anisotropy. These results demonstrate that ion irradiation may be used to systematically modify the magnetic anisotropy and distribution of magnetic anisotropy parameters of Co/Pd/Co/Ni multilayers for applications and basic physics studies.

36 MATERIALS SCIENCE↗

First-principle description of magnonic PdnFem multilayers

Ab-initio calculations are used to determine the parameters that determine magnonic band structure of PdnFem multilayers (n = 2, m <= 8). We obtain the layer-resolved magnetization, the exchange coupling, and the magnetic anisotropy of the Pd-Fe structures. The Fe moment is 3.0 mu(B) close to the Pd layers and 2.2 mu(B) in the middle of the Fe layers. An intriguing but not usually considered aspect is that the elemental Pd is nonmagnetic, similar to Cu spacer layers in other multilayer systems. This leads to a pre-asymptotic ferromagnetic coupling through the Pd (about 40 mJ/m(2)). Furthermore, the Pd acquires a small moment due to spin polarization by neighboring Fe atoms, which translates into magnetic anisotropy. The anisotropies are large, in the range typical for L1(0) structures, which is beneficial for high-frequency applications. (C) 2011 American Institute of Physics. [doi:10.1063/1.3556763]

Manchanda, P↗

Microstructure and ordering parameter studies in multilayer [FePt(x)/Os]{sub n} films

The microstructure, ordering parameter, and magnetic properties of multilayer [FePt(x)/Os]{sub n} films on glass substrate by dc-magnetron sputtering (with x being thickness in nm; Os with a fixed thickness 5 nm; n being the number of layers) have been studied as a function of the annealing temperatures between 300 and 900 deg. C. The grain size of multilayer films can be controlled by annealing temperature and thickness of the FePt layer with Os space layer. The coercivity as a function of the annealing temperature for samples with n = 1 and pure FePt behaves roughly saturated after annealing above 700 deg. C. However, for samples with n > 4 the value of H{sub c} seems still increasing with increasing annealing temperature between 600 and 900 deg. C, and the ordering parameter decreases with increasing the number of Os layers. Our experimental results are reasonably well to describe the effect of strain-assisted transformation.

36 MATERIALS SCIENCE↗

Surfactant mediated growth of Ti/Ni multilayers

The surfactant mediated growth of Ti/Ni multilayers is studied. They were prepared using ion beam sputtering at different adatom energies. It was found that the interface roughness decreased significantly when the multilayers were sputtered with Ag as surfactant at an ion energy of 0.75 keV. On the other hand, when the ion energy was increased to 1 keV, it resulted in enhanced intermixing at the interfaces and no appreciable effect of Ag surfactant could be observed. On the basis of the obtained results, the influence of adatom energy on the surfactant mediated growth mechanism is discussed.

36 MATERIALS SCIENCE↗

Resonance Effects in Photoemission from TiO2-capped Mo/Si Multilayer Mirrors for Extreme Ultraviolet Applications

In the unbaked vacuum systems of extreme ultraviolet (EUV) lithography steppers, oxide formation and carbon growth on Mo/Si multilayer mirrors (MLMs) are competing processes leading to reflectivity loss. A major contribution to this mirror degradation is a series of surface reactions that are thought to be driven in large part by photoemitted electrons. In this paper, we focus on the resonance effects in photoemission from Mo/Si MLMs protected by thin TiO{sub 2} cap layers. In the vicinity of the resonant energy of the mirror, the energy flux of the EUV radiation forming standing wave oscillates throughout the multilayer stack. As a result, light absorption followed by the emission of photoelectrons becomes a complex process that varies rapidly with depth and photon energy. The electron emission is characterized as a function of the EUV photon energy, the angle of incidence, and the position of the standing wave with respect to the solid/vacuum interface. In our experiments, the position of the standing wave was controlled both by deliberately varying the thickness of the Si terminating layer (of the Mo/Si stack) and by depositing C films of various thicknesses on the TiO{sub 2}. The experimental data are compared with model simulations to examine the changes in photoemission yield due to the presence of carbon and to the changes in the position of the standing wave. We find that carbon deposition can have a dramatic impact on the yield and, therefore, on the rates of electron mediated reactions at the surface.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effects of Au layer thickness and number of bilayers on the properties of Au/ZnO multilayers

Multilayered films of Au/ZnO were prepared by physical vapor deposition. Varying the Au thickness, t{sub Au}, and the number of bilayers, n, allowed us to investigate the role of these parameters on the sample structural and electronic properties. X-ray diffraction, X-ray absorption spectroscopy, grazing incidence small angle X-ray scattering and transmission electron microscopy experiments, have been combined to UV-visible and infrared spectroscopy to characterize the multilayers in the as-prepared state and after annealing. In the as-prepared state, the strong Au and ZnO lattice interaction leads to ZnO epitaxy on Au. Gold appears either as continuous layers or in form of nanoparticles. ZnO experiences a structural transformation from wurztite to rock salt monitored by the Au morphology. Annealing at 500 deg. C destroys the lattice matching. The electronic and optical properties of the systems are understood in line with the Au morphology and ZnO structural state.

36 MATERIALS SCIENCE↗

Magnetic properties of sputtered Permalloy/molybdenum multilayers

In this work, we report the magnetic properties of sputtered Permalloy (Py: Ni{sub 80}Fe{sub 20})/molybdenum (Mo) multilayer thin films. We show that it is possible to maintain a low coercivity and a high permeability in thick sputtered Py films when reducing the out-of-plane component of the anisotropy by inserting thin film spacers of a non-magnetic material like Mo. For these kind of multilayers, we have found coercivities which are close to those for single layer films with no out-of-plane anisotropy. The coercivity is also dependent on the number of layers exhibiting a minimum value when each single Py layer has a thickness close to the transition thickness between Neel and Bloch domain walls.

36 MATERIALS SCIENCE↗

Application of multilayer mirror for harmonic analysis in soft X-ray region

Order contamination in soft x-ray beamline is a severe problem which poses difficulty in various analysis techniques. Generally grating analyzer is used to estimate the higher order contribution where poor knowledge of wall and land roughness contribution makes it difficult to get theoretical fit and so analysis gives qualitative estimation only. Here we demonstrate the application of multilayer mirror for accurate determination of order contamination in Toroidal grating monochromator (TGM) at reflectivity beamline of Indus-1. We used a Mo/Si multilayer of d{approx}100Aa period to quantify 2{sup nd} and 3{sup rd} order composition to identify order contamination below 0.5% or better.

43 PARTICLE ACCELERATORS↗

Development of W/C soft x-ray multilayer mirror by ion beam sputtering (IBS) system for below 50A wavelength

A home-made Ion Beam Sputtering (IBS) system has been developed in our laboratory. Using the IBS system single layer W and single layer C film has been deposited at 1000eV Ar ion energy and 10mA ion current. The W-film has been characterized by grazing Incidence X-ray reflectrometry (GIXR) technique and Atomic Force Microscope technique. The single layer C-film has been characterized by Spectroscopic Ellipsometric technique. At the same deposition condition 25-layer W/C multilayer film has been deposited which has been designed for using as mirror at 30 Degree-Sign grazing incidence angle around 50A wavelength. The multilayer sample has been characterized by measuring reflectivity of CuK{alpha} radiation and soft x-ray radiation around 50A wavelength.

36 MATERIALS SCIENCE↗

Design of soft x-ray wide-band multilayer gratings for constant deviation monochromators

Constant deviation condition performing scanning energy by the rotation of grating around itself is the one of the most practical mounting for grating monochromators. Conventional multilayer coating can obtain high diffraction efficiency merely in a narrow band width. It is found that a new modified multilayer structure on the laminar-type grating intended to enhance the diffraction efficiency for constant deviation condition shows the diffraction efficiency over 5% in a wide band range of 1.5-2.5 keV in calculation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗