Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Direct Oxidation of Methane to Methanol Enabled by Electronic Atomic Monolayer–Metal Support Interaction

Direct, catalytic oxidation of methane to methanol (MTM) with molecular oxygen is a highly desirable process to valorize methane. We propose that Rh-doped graphene (GR) supported on Ni(111) can be a promising catalyst for MTM with appreciable activity and selectivity. In the absence of the Ni(111) support, a MTM process is difficult. The catalytic activity of the Rh-doped GR is enabled by the Ni(111) support that covalently binds the Rh-doped GR and significantly modifies its properties, leading to facile O 2 activation by the synergy of the Rh dopant and the neighboring carbon atom of GR. The highly activated O 2 and the Rh dopant in turn activate CH 4 . Strikingly, the methane C–H bond breaking is preferred over methanol C–H bond breaking at 473 K. Here, the strong interaction between TM-doped GR and Ni(111) is found to be a general mechanism for regulating the adsorption strength of various molecules, providing important insight for tuning the properties of single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Palladium catalysts synthesized by atomic layer deposition for methanol decomposition.

Atomic layer deposition (ALD) palladium films were deposited at 200 C on various ALD metal oxide surfaces using sequential exposures to Pd(II) hexafluoroacetylacetonate (Pd(hfac)2) and formalin. In situ quartz crystal microbalance measurements as well as ex situ measurements performed on planar substrates revealed that the Pd growth begins with a relatively slow nucleation process and accelerates once an adequate amount of Pd has deposited on the surface. Furthermore, the Pd nucleation is faster on ALD ZnO surfaces compared to ALD Al2O3 surfaces. ALD was utilized to synthesize highly dispersed, uniform Pd nanoparticles (1 to 2 nm in diameter) on ALD ZnO and Al2O3 coated mesoporous silica gel, and the catalytic performances of these samples were compared in the methanol decomposition reaction. The ALD Pd-Al2O3 showed high activity and hydrogen selectivity at relatively low temperatures while the ALD Pd-ZnO showed very low activity as well as quick deactivation. In situ extended X-ray absorption fine structure (EXAFS) measurement revealed that the Pd supported on ZnO 'dissolves' into the substrate during the methanol decomposition reaction which accounts for the gradual disappearance of its catalytic activity. By applying one cycle of ALD Al2O3 on top of the Pd-ZnO catalyst, the activity was enhanced and the catalyst deactivation was mitigated. This Al2O3 overcoating method stabilizes the Pd-ZnO and effectively prevents the dissolution of Pd into the ZnO substrate.

10 SYNTHETIC FUELS↗

Synthesis of Pt{sub 3}Sn alloy nanoparticles and their catalysis for electro-oxidation of CO and methanol.

Monodisperse Pt{sub 3}Sn alloy nanoparticles (NPs) were synthesized by a controlled coreduction of Pt(II) acetylacetonate and Sn(II) acetylacetonate at 180-280 C in 1-octadecene. In the synthesis, oleylamine was used as a reducing agent, and oleylamine/oleic acid served as surfactants. The sizes of the Pt{sub 3}Sn NPs were tuned from 4 to 7 nm by controlling the metal salt injection temperatures from 180 to 240 C. These monodisperse Pt3Sn NPs were highly active for CO and methanol oxidation in 0.1 M HClO{sub 4} solutions, and their activity and stability could be further improved by a postsynthesis thermal treatment at 400 C in Ar + 5% H{sub 2} for 1 h. They are promising as a practical catalyst for CO and methanol oxidation reactions in polymer electrolyte membrane fuel cell conditions.

10 SYNTHETIC FUELS↗

Effect of Oxygen Defects on the Catalytic Performance of VOx/CeO2 Catalysts for Oxidative Dehydrogenation of Methanol

In this work, CeO2 nanocubes with controlled particle size and dominating (100) facets are synthesized as supports for VOx catalysts. Combined TEM, SEM, XRD, and Raman study reveals that the oxygen vacancy density of CeO2 supports can be tuned by tailoring the particle sizes without altering the dominating facets, where smaller particle sizes result in larger oxygen vacancy densities. At the same vanadium coverage, the VOx catalysts supported on small-sized CeO2 supports with higher oxygen defect densities exhibit promoted redox property and lower activation energy for methoxyl group decomposition, as evidenced by H2-TPR and methanol TPD study. These results further confirm that the presence of oxygen vacancies plays an important role in promoting the activity of VOx species in methanol oxidation. We gratefully acknowledge financial support from the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Part of this work was conducted in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

(100)↗

Engineering Second Sphere Interactions in a Host–Guest Multicomponent Catalyst System for the Hydrogenation of Carbon Dioxide to Methanol

Many enzymes utilize interactions extending beyond the primary coordination sphere to enhance catalyst activity and/or selectivity. Such interactions could improve the efficacy of synthetic catalyst systems, but the supramolecular assemblies employed by biology to incorporate second sphere interactions are challenging to replicate in synthetic catalysts. Herein, a strategy is reported for efficiently manipulating outer sphere influence on catalyst reactivity by modulating host–guest interactions between a noncovalently encapsulated transitionmetal-based catalyst guest and a metal–organic framework (MOF) host. This composite consists of a ruthenium PNP pincer complex encapsulated in the MOF UiO-66 that is used in tandem with the zirconium oxide nodes of UiO-66 and a ruthenium PNN pincer complex to hydrogenate carbon dioxide to methanol. Due to the method used to incorporate the complexes in UiO-66, structure–activity relationships could be efficiently determined using a variety of functionalized UiO-66-X hosts. These investigations uncovered the beneficial effects of the ammonium functional group (i.e., UiO-66-NH 3 + ). Mechanistic experiments revealed that the ammonium functionality improved efficiency in the hydrogenation of carbon dioxide to formic acid, the first step in the cascade. Isotope effects and structure–activity relationships suggested that the primary role of the ammonium functionality is to serve as a general Brønsted acid. Importantly, the cooperative influence from the host was effective only with the functional group in close proximity to the encapsulated catalyst. Here, reactions carried out in the presence of molecular sieves to remove water highlighted the beneficial effects of the ammonium functional group in UiO-66-NH 3 + and resulted in a 4-fold increase in activity. As a result of the modular nature of the catalyst system, the highest reported turnover number (TON) (19 000) and turnover frequency (TOF) (9100 h –1 ) for the hydrogenation of carbon dioxide to methanol are obtained. Moreover, the reaction was readily recyclable, leading to a cumulative TON of 100 000 after 10 reaction cycles.

08 HYDROGEN↗

Structure of the Methanol Liquid-Vapor Interface: A Comprehensive Particle-Based Simulation Study

This research addresses a comprehensive particle-based simulation study of the structural, dynamic, and electronic properties of the liquid-vapor interface of methanol utilizing both ab initio (based on density functional theory) and empirical (fixed charge) models. Numerous properties such as interfacial width, hydrogen bond populations, dipole moments, and correlation times are characterized with identical schemes to draw useful conclusions on the strengths and weakness of the proposed models for the interface of neat methanol. Our findings indicate that all models considered in this study yield similar results for the radial distribution functions, hydrogen bond populations, and orientational relaxation times. Significant differences in the models appear when examining both the dipole moments and surface relaxation near the aqueous liquid-vapor interface. Here, the density functional theory interaction potential predicts a significant decrease in the molecular dipole moment and slight expansion in the oxygen-oxygen distance as the interface is approached. This work was supported by the U.S. Department of Energy's (DOE) Office of Basic Energy Sciences, Chemical Sciences program. The Pacific Northwest National Laboratory is operated by Battelle for DOE. For submission to Journal of Physical Chemistry B

08 HYDROGEN↗

Methanol to olefin Conversion on HSAPO-34 zeolite from periodic density functional theory calculations: a complete cycle of side chain hydrocarbon pool mechanism

For its unique position in the coal chemical industry, the methanol to olefin (MTO) reaction has been a hot topic in zeolite catalysis. Due to the complexities of catalyst structure and reaction networks, many questions such as how the olefin chain is built from methanol remain elusive. On the basis of periodic density functional theory calculations, this work establishes the first complete catalytic cycle for MTO reaction via hexamethylbenzene (HMB) trapped in HSAPO-34 zeolite based on the so-called side chain hydrocarbon pool mechanism. The cycle starts from the methylation of HMB that leads to heptamethylbenzenium ion (heptaMB{sup +}) intermediate. This is then followed by the growth of side chain via repeated deprotonation of benzenium ions and methylation of the exocyclic double bond. Ethene and propene can finally be released from the side ethyl and isopropyl groups of benzenium ions by deprotonation and subsequent protonation steps. We demonstrate that (i) HMB/HSAPO-34 only yields propene as the primary product based on the side chain hydrocarbon pool mechanism and (ii) an indirect proton-shift step mediated by water that is always available in the system is energetically more favorable than the traditionally regarded internal hydrogen-shift step. Finally, the implications of our results toward understanding the effect of acidity of zeolite on MTO activity are also discussed.

01 COAL, LIGNITE, AND PEAT↗

Contrast in Metal-Ligand Effects on PtnM Electrocatalysts with M Equal Ru vs Mo and Sn As Exhibited by in Situ XANES and EXAFS Measurements in Methanol

In situ X-ray absorption spectroscopy (XAS) measurements, at the Pt L{sub 3} edge (XANES and EXAFS), were carried out on carbon-supported Pt{sub n}Mo and PtSn electrocatalysts in an electrochemical cell in 1 M HClO{sub 4} with 0.3 M methanol. The CO, OH, and H relative adsorbate coverages on Pt are determined as a function of the applied potential via the {Delta}XANES technique and compared with comparable data previously reported for Pt{sub n}Ru. The more reactive Sn and Mo atoms on the Pt surface form the oxide over the potentials of interest, while Ru has variable oxide content depending on Ru island size and potential. The strength of the electronic ligand effect appears to increase in the order Ru < MoO{sub n} < SnO{sub n} < RuO{sub n}, where the Pt-CO bond strength is found to decrease and the Pt-OH bond strength increase with ligand effect. In the Sn and Mo bimetallics, the ligand effect is found to be sufficiently strong to allow CO replacement by H{sub 2} at low potentials. These widely different ligand effects may provide a straightforward explanation for the previously observed anode behavior in fuel cells: Pt{sub n}Mo better in reformate but Pt{sub n}Ru better in methanol.

10 SYNTHETIC FUELS↗

Facet-dependent active sites of a single Cu 2 O particle photocatalyst for CO 2 reduction to methanol

Atomic level understanding of the active sites and transformation mechanisms under realistic working conditions are pre-requisites for rational design of high performance photocatalysts. By using correlated scanning fluorescence x-ray microscopy and environmental transmission electron microscopy at atmospheric pressure, in operando, we directly observed that the (110) facet of a single Cu 2 O photocatalyst particle is photocatalytically active for CO 2 reduction to methanol while the (100) facet is inert. The oxidation state of the active sites changed from Cu(I) towards Cu(II) due to CO 2 and H 2 O coadsorption and changed back to Cu+ after CO 2 conversion under visible light illumination. The Cu 2 O photocatalyst oxidized water as it reduced CO 2 . At the same time, the crystal lattice expanded due to CO 2 adsorption then reverted after CO 2 conversion. The internal quantum yield for unassisted wireless photocatalytic reduction of CO 2 to methanol using Cu 2 O crystals is ~ 72% with 10% solar to fuel efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlating the chemical composition and size of various metal oxide substrates with the catalytic activity and stability of as-deposited Pt nanoparticles for the methanol oxidation reaction

The performance of electrode materials in conventional direct alcohol fuel cells (DAFC) is constrained by (i) the low activity of the catalyst materials relative to their overall cost, (ii) the poisoning of the active sites due to the presence of partially oxidized carbon species (such as but not limited to CO, formate, and acetate) produced during small molecule oxidation, and (iii) the lack of catalytic stability and durability on the underlying commercial carbon support. Therefore, as a viable alternative, we have synthesized various metal oxide and perovskite materials of different sizes and chemical compositions as supports for Pt nanoparticles (NPs). Our results including unique mechanistic studies demonstrate that the SrRuO 3 substrate with immobilized Pt NPs at its surface evinces the best methanol oxidation performance as compared with all of the other substrate materials tested herein, including commercial carbon itself. In addition, data from electron energy loss spectroscopy (EELS) and X-ray photoelectron spectroscopy (XPS) confirmed the presence of electron transfer from bound Pt NPs to surface Ru species within the SrRuO 3 substrate itself, thereby suggesting that favorable metal support interactions are responsible for the increased methanol oxidation reaction (MOR) activity of Pt species with respect to the underlying SrRuO 3 composite catalyst material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Binding of the substrate analog methanol in the oxygen-evolving complex of photosystem II in the D1-N87A genetic variant of cyanobacteria

The solar water-splitting protein complex, photosystem II (PSII), catalyzes one of the most energetically demanding reactions in nature by using light energy to drive a catalyst capable of oxidizing water. The water oxidation reaction is catalyzed at the Mn 4 Ca-oxo cluster in the oxygen-evolving complex (OEC), which cycles through five light-driven S-state intermediates (S 0 –S 4 ). A detailed mechanism of the reaction remains elusive as it requires knowledge of the delivery and binding of substrate water in the higher S-state intermediates. In this paper, we use two-dimensional (2D) hyperfine sublevel correlation spectroscopy, in conjunction with quantum mechanics/molecular mechanics (QM/MM) and density functional theory (DFT), to probe the binding of the substrate analog, methanol, in the S 2 state of the D1-N87A variant of PSII from Synechocystis sp. PCC 6803. The results indicate that the size and specificity of the “narrow” channel is altered in D1-N87A PSII, allowing for the binding of deprotonated 13 C-labeled methanol at the Mn4(IV) ion of the catalytic cluster in the S 2 state. This has important implications on the mechanistic models for water oxidation in PSII.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-crystal CeCl{sub 3}(CH{sub 3}OH){sub 4}: A new metal-organic cerium chloride methanol adduct for scintillator applications

A new scintillator material consisting of a methanol adduct of cerium trichloride with the composition CeCl{sub 3}(CH{sub 3}OH){sub 4} has been discovered and crystallized in the form of large single crystals by solution growth in methanol. The peak emission of the x-ray-excited luminescence spectrum occurs at {approx}364 nm. A light yield of up to {approx}16 600 photons/MeV and an energy resolution of 11.4% were obtained using 662 keV gamma-ray photons. The scintillator decay time for 662 keV gamma-ray excitation was measured using the time-correlated, single-photon-counting method, and a nominal value of 64.4 ns was obtained. The molecular adduct CeCl{sub 3}(CH{sub 3}OH){sub 4} represents the first example of a rare-earth, metal-organic scintillator that is applicable to gamma ray, x ray, and neutron detection.

36 MATERIALS SCIENCE↗

Adaptive kinetic Monte Carlo simulation of methanol decomposition on Cu(100)

The adaptive kinetic Monte Carlo method was used to calculate the dynamics of methanol decomposition on Cu(100) at room temperature over a time scale of minutes. Mechanisms of reaction were found using min-mode following saddle point searches based upon forces and energies from density functional theory. Rates of reaction were calculated with harmonic transition state theory. The dynamics followed a pathway from CH3-OH, CH3-O, CH2-O, CH-O and finally C-O. Our calculations confirm that methanol decomposition starts with breaking the O-H bond followed by breaking C-H bonds in the dehydrogenated intermediates until CO is produced. The bridge site on the Cu(100) surface is the active site for scissoring chemical bonds. Reaction intermediates are mobile on the surface which allows them to find this active reaction site. This study illustrates how the adaptive kinetic Monte Carlo method can model the dynamics of surface chemistry from first principles.

10 SYNTHETIC FUELS↗

High Resolution FIR and IR Spectroscopy of Methanol Isotopologues

New astronomical facilities such as HIFI on the Herschel Space Observatory, the SOFIA airborne IR telescope and the ALMA sub-mm telescope array will yield spectra from interstellar and protostellar sources with vastly increased sensitivity and frequency coverage. This creates the need for major enhancements to laboratory databases for the more prominent interstellar 'weed' species in order to model and account for their lines in observed spectra in the search for new and more exotic interstellar molecular 'flowers'. With its large-amplitude internal torsional motion, methanol has particularly rich spectra throughout the FIR and IR regions and, being very widely distributed throughout the galaxy, is perhaps the most notorious interstellar weed. Thus, we have recorded new spectra for a variety of methanol isotopic species on the high-resolution FTIR spectrometer on the CLS FIR beamline. The aim is to extend quantum number coverage of the data, improve our understanding of the energy level structure, and provide the astronomical community with better databases and models of the spectral patterns with greater predictive power for a range of astrophysical conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reaction of C{sub 2}(a {sup 3}{Pi}{sub u}) with methanol: Temperature dependence and deuterium isotope effect

Bimolecular rate constants for the gas-phase reactions of C{sub 2}(a {sup 3}{Pi}{sub u}) with a variety of methanol isotopomers including CH{sub 3}OH (k{sub 1}), CH{sub 3}OD (k{sub 2}), CD{sub 3}OH (k{sub 3}), and CD{sub 3}OD (k{sub 4}) have been measured over the temperature range of 293-673 K by means of pulsed laser photolysis/laser-induced fluorescence technique. The rate constants, in units of cm{sup 3} molecule{sup -1} s{sup -1}, can be fitted by the normal Arrhenius expressions: k{sub 1}(T)=(1.32{+-}0.02)x10{sup -11} exp[-(366.80{+-}4.44)/T], k{sub 2}(T)=(1.34{+-}0.02)x10{sup -11} exp[-(376.86{+-}5.09)/T], k{sub 3}(T)=(1.09{+-}0.02)x10{sup -11} exp[-(640.00{+-}7.23)/T], and k{sub 4}(T)=(1.12{+-}0.01)x10{sup -11} exp[-(666.37{+-}4.63)/T], where all error estimates are {+-}2{sigma} and represent the precision of the fit. The observed deuterium kinetic isotope effects, k{sub 1}/k{sub 2} and k{sub 1}/k{sub 3}, along with the positive temperature dependences of k(T), allow us to reach a conclusion that the reaction of C{sub 2}(a {sup 3}{Pi}{sub u}) with methanol in 293-673 K proceeds via a site-specific hydrogen abstraction mechanism, that is, H-atom abstraction from the methyl site rather than from the hydroxyl site dominating reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of silver nanoparticles/graphene nanosheets as a catalyst for electrochemical oxidation of methanol

In this report, silver nanoparticles (AgNPs) decorated graphene nanosheets have been prepared based on the reduction of Ag ions by hydroquinone, and their catalytic performance towards the electrochemical oxidation of methanol is investigated. The synthesis of the nano-composite is confirmed by transmission electron microscope measurements and UV-vis absorption spectra. Excellent electrocatalytic performance of the material is demonstrated by cyclic voltammograms. This material also contributes to the low peak potential of methanol oxidation compared with most of the other materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Critical interpretation of CH– and OH– stretching regions for infrared spectra of methanol clusters (CH{sub 3}OH){sub n} (n = 2–5) using self-consistent-charge density functional tight-binding molecular dynamics simulations

Vibrational infrared (IR) spectra of gas-phase O–H⋅⋅⋅O methanol clusters up to pentamer are simulated using self-consistent-charge density functional tight-binding method using two distinct methodologies: standard normal mode analysis and Fourier transform of the dipole time-correlation function. The twofold simulations aim at the direct critical assignment of the C–H stretching region of the recently recorded experimental spectra [H.-L. Han, C. Camacho, H. A. Witek, and Y.-P. Lee, J. Chem. Phys. 134, 144309 (2011)]. Both approaches confirm the previous assignment (ibid.) of the C–H stretching bands based on the B3LYP/ANO1 harmonic frequencies, showing that ν{sub 3}, ν{sub 9}, and ν{sub 2} C–H stretching modes of the proton-accepting (PA) and proton-donating (PD) methanol monomers experience only small splittings upon the cluster formation. This finding is in sharp discord with the assignment based on anharmonic B3LYP/VPT2/ANO1 vibrational frequencies (ibid.), suggesting that some procedural faults, likely related to the breakdown of the perturbational vibrational treatment, led the anharmonic calculations astray. The IR spectra based on the Fourier transform of the dipole time-correlation function include new, previously unaccounted for physical factors such as non-zero temperature of the system and large amplitude motions of the clusters. The elevation of temperature results in a considerable non-homogeneous broadening of the observed IR signals, while the presence of large-amplitude motions (methyl group rotations and PA-PD flipping), somewhat surprisingly, does not introduce any new features in the spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: Towards the binding energy and vibrational red shift of the simplest organic hydrogen bond: Harmonic constraints for methanol dimer

The discrepancy between experimental and harmonically predicted shifts of the OH stretching fundamental of methanol upon hydrogen bonding to a second methanol unit is too large to be blamed mostly on diagonal and off-diagonal anharmonicity corrections. It is shown that a decisive contribution comes from post-MP2 electron correlation effects, which appear not to be captured by any of the popular density functionals. We also identify that the major deficiency is in the description of the donor OH bond. Together with estimates for the electronic and harmonically zero-point corrected dimer binding energies, this work provides essential constraints for a quantitative description of this simple hydrogen bond. The spectroscopic dissociation energy is predicted to be larger than 18 kJ/mol and the harmonic OH-stretching fundamental shifts by about −121 cm{sup −1} upon dimerization, somewhat more than in the anharmonic experiment (−111 cm{sup −1})

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗