Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Validation of ICESat-2 ATLAS Bathymetry and Analysis of ATLAS’s Bathymetric Mapping Performance

NASA’s Ice, Cloud, and Land Elevation Satellite-2 (ICESat-2) was launched in September, 2018. The satellite carries a single instrument, ATLAS (Advanced Topographic Laser Altimeter System), a green wavelength, photon-counting lidar, enabling global measurement and monitoring of elevation with a primary focus on the cryosphere. Although bathymetric mapping was not one of the design goals for ATLAS, pre-launch work by our research team showed the potential to map bathymetry with ICESat-2, using data from MABEL (Multiple Altimeter Beam Experimental Lidar), NASA’s high-altitude airborne ATLAS emulator, and adapting the laser-radar equation for ATLAS specific parameters. However, many of the sensor variables were only approximations, which limited a full assessment of the bathymetric mapping capabilities of ICESat-2 during pre-launch studies. Following the successful launch, preliminary analyses of the geolocated photon returns have been conducted for a number of coastal sites, revealing several salient examples of seafloor detection in water depths of up to ~40 m. The geolocated seafloor photon returns cannot be taken as bathymetric measurements, however, since the algorithm used to generate them is not designed to account for the refraction that occurs at the air–water interface or the corresponding change in the speed of light in the water column. This paper presents the first early on-orbit validation of ICESat-2 bathymetry and quantification of the bathymetric mapping performance of ATLAS using data acquired over St. Thomas, U.S. Virgin Islands. A refraction correction, developed and tested in this work, is applied, after which the ICESat-2 bathymetry is compared against high-accuracy airborne topo-bathymetric lidar reference data collected by the U.S. Geological Survey (USGS) and the National Oceanic and Atmospheric Administration (NOAA). The results show agreement to within 0.43—0.60 m root mean square error (RMSE) over 1 m grid resolution for these early on-orbit data. Refraction-corrected bottom return photons are then inspected for four coastal locations around the globe in relation to Visible Infrared Imaging Radiometer Suite (VIIRS) K(d)(490) data to empirically determine the maximum depth mapping capability of ATLAS as a function of water clarity. It is demonstrated that ATLAS has a maximum depth mapping capability of nearly 1 Secchi in depth for water depths up to 38 m and K(d)(490) in the range of 0.05–0.12 per m. Collectively, these results indicate the great potential for bathymetric mapping with ICESat-2, offering a promising new tool to assist in filling the global void in nearshore bathymetry.

ICESat-2↗

Large-Scale High-Resolution Coastal Mangrove Forests Mapping Across West Africa With Machine Learning Ensemble and Satellite Big Data

Coastal mangrove forests provide important ecosystem goods and services, including carbon sequestration, biodiversity conservation, and hazard mitigation. However, they are being destroyed at an alarming rate by human activities. To characterize mangrove forest changes, evaluate their impacts, and support relevant protection and restoration decision making, accurate and up-to-date mangrove extent mapping at large spatial scales is essential. Available large-scale mangrove extent data products use a single machine learning method commonly with 30 m Landsat imagery, and significant inconsistencies remain among these data products. With huge amounts of satellite data involved and the heterogeneity of land surface characteristics across large geographic areas, finding the most suitable method for large-scale high-resolution mangrove mapping is a challenge. The objective of this study is to evaluate the performance of a machine learning ensemble for mangrove forest mapping at 20 m spatial resolution across West Africa using Sentinel-2 (optical) and Sentinel-1 (radar) imagery. The machine learning ensemble integrates three commonly used machine learning methods in land cover and land use mapping, including Random Forest (RF), Gradient Boosting Machine (GBM), and Neural Network (NN). The cloud-based big geospatial data processing platform Google Earth Engine (GEE) was used for pre-processing Sentinel-2 and Sentinel-1 data. Extensive validation has demonstrated that the machine learning ensemble can generate mangrove extent maps at high accuracies for all study regions in West Africa (92%–99% Producer’s Accuracy, 98%–100% User’s Accuracy, 95%–99% Overall Accuracy). This is the first-time that mangrove extent has been mapped at a 20 m spatial resolution across West Africa. The machine learning ensemble has the potential to be applied to other regions of the world and is therefore capable of producing high-resolution mangrove extent maps at global scales periodically.

coastal environment↗

Global geologic map of asteroid (101955) Bennu indicates heterogeneous resurfacing in the past 500,000 years

Global geologic maps are useful tools for efficient interpretation of a planetary body, and they provide global context for the diversity and evolution of the surface. We used data acquired by the OSIRIS-REx spacecraft to create the first global geologic map of the near-Earth asteroid (101955) Bennu. As this is the first geologic map of a small, non-spherical, rubble-pile asteroid, we discuss the distinctive mapping challenges and best practices that may be useful for future exploration of similar asteroids, such as those to be visited with the Hera and Janus missions. By mapping on two centimeter-scale global image mosaics (2D projected space) and a centimeter-scale global shape model (3D space), we generated three input maps respectively describing Bennu’s shape features, geologic features, and surface texture. Based on these input maps, we defined two geologic units: the Smooth Unit and the Rugged Unit. The units are differentiated primarily on the basis of surface texture, concentrations of boulders, and the distributions of lineaments, mass movement features, and craters. They are bounded by several scarps. The Rugged Unit contains abundant boulders and signs of recent mass movement. It also has fewer small(<20 m), putatively fresh craters than the Smooth Unit, suggesting that such craters have been erased in the former. Based on these geologic indicators, we infer that the Rugged Unit has the younger surface of the two. Differential crater size-frequency distributions and the distribution of the freshest craters suggest that both unit surfaces formed ~10–65 million years ago, when Bennu was located in the Main Asteroid Belt, and the Smooth Unit has not been significantly resurfaced in the past 2 million years. Meanwhile, the Rugged Unit has experienced resurfacing within the past ~500,000years during Bennu’s lifetime as a near-Earth asteroid. The geologic units are consistent with global diversity in slope, surface roughness, normal albedo, and thermal emission spectral characteristics. The site on Bennu where the OSIRIS-REx mission collected a regolith sample is located in the Smooth Unit, in a small crater nested within a larger one. So although the Smooth Unit is an older surface than the Rugged Unit, the impact-crater settingindicates that the material sampled was recently exposed. Several similarities are apparent between Bennu and asteroid (162173) Ryugu from a global geologic perspective, including two geologic units distinguishable by variations in the number density of boulders, as well as in other datasets such as brightness.

E R Jawin↗

McMillan map and nonlinear Twiss parameters

In this article we consider two dynamical systems: the McMillan sextupole and octupole integrable mappings originally introduced by Edwin McMillan; the second one is also known as canonical McMillan map. Both of them are simplest symmetric McMillan maps with only one intrinsic parameter, the trace of the Jacobian at the fixed point. While these dynamical systems have numerous of applications and are used in many areas of math and physics, some of their dynamical properties have not been described yet. We fulfill the gap and provide complete description of all stable trajectories including parametrization of invariant curves, Pioncaré rotation numbers and canonical action-angle variables. In the second part we relate these maps with general chaotic map in McMillan-Turaev form. We show that McMillan sextupole and octupole mappings are first order approximations of dynamics around the fixed point, in a similar way as linear map and quadratic invariant (Courant-Snyder invariant in accelerator physics) is the zeroth order approximation (known as linearization). Finally we suggest the new formalism of nonlinear Twiss parameters which incorporate dependence of rotation number as a function of amplitude, in contrast to e.g. betatron phase advance used in accelerator physics which is independent of amplitude. Specifically in application to accelerator physics this new formalism is capable of predicting dynamical aperture around 1-st, 2-nd, 3-rd and 4-th order resonances for flat beams, which is critical for beam injection/extraction.

43 PARTICLE ACCELERATORS↗

Mapping entry invalidation

A memory access system may include a first memory address translator, a second memory address translator and a mapping entry invalidator. The first memory address translator translates a first virtual address in a first protocol of a memory access request to a second virtual address in a second protocol and tracks memory access request completions. The second memory address translator is to translate the second virtual address to a physical address of a memory. The mapping entry invalidator requests invalidation of a first mapping entry of the first mapping address translator requests invalidation of a second mapping entry of the second memory address translator corresponding to the first mapping entry following invalidation of the first mapping entry and based upon the tracked memory access request completions.

Walker, Shawn K.↗

Evaluation of Story Maps to Enhance Public Engagement and Communication at Legacy Management Sites - 17334

The US Department of Energy's Office of Legacy Management's (LM) mission is to fulfill the department's post-closure responsibilities and to ensure protection of human health and the environment. Accomplishing that mission currently requires managing 91 legacy sites across the country by performing efficient long-term surveillance and maintenance activities, preserving and making accessible historic site records, and identifying opportunities for beneficial reuse. Integral to the success of these activities is connecting and effectively communicating with the public, governments, and other interested parties. Relationships with such entities are so important that the Office of Legacy Management has elevated such engagement to one of its strategic goals for the next 10 years. Several public engagement efforts are currently supported, including stakeholder meetings, interpretive visitor centers, hard-copy documents, and Internet-based information sources. The tools available to communicate with the public via the Internet are continually improving, and LM proactively evaluates these tools to enhance public engagement. The use of ESRI Story Maps to effectively and more succinctly communicate LM's long-term surveillance and maintenance practices is one tool currently being evaluated. Story Maps can utilize multiple types of content to engage users through site narratives, illustrations of change over time, photos, videos, and embedded links to external sources of information. The ability to illustrate site complexities via graphics and geo-spatial data is particularly useful for staff as well as communicating to stakeholders. Staff with a variety of expertise and functions in the organization can be empowered to respond to stakeholder questions using this tool. In addition, Story Maps can be easily initiated and managed in real time by LM site managers, an efficiency that would be invaluable to them as immediate site communication needs arise. A series of test Story Maps for several sites were developed to explore the capabilities of the tool. The test Story Maps included pages that described site description and overview, historical conditions and use, cleanup conditions, current monitoring data if applicable, and institutional controls. Links to existing communications tools were also incorporated in Story Maps, such as existing web sites that currently store environmental reports and the Geo-spatial Environmental Mapping System (GEMS), where stakeholders can download monitoring data. As with any tool, many things must be taken into consideration, such as: 1) Can the current IT infrastructure support the tool? 2) What data quality protocols need to be established? 2) What resources will be needed to maintain this tool? 3) What type of information should be shared? 4) Who will be responsible for information updates? This paper explores potential approaches for developing and deploying this tool for the public. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Integration of historical map and aerial imagery to characterize long-term land-use change and landscape dynamics: An object-based analysis via Random Forests

Tracking Earth’s past helps us to move from hindsight to foresight in seeking landscape sustainability, a pursuit aided by modern mapping capabilities but hindered by a dearth of historical landscape information. To fill the data gap and exemplify the use of old map for land-use change sciences, we combined a paper-based US civil war map and aerial photos to derive land-use history and landscape dynamics at fine scales for a region near Chancellorsville, VA, USA, from 1867 to 2014. We also tested how advanced algorithms—object-based analysis and random forests (RF)—could aid in data processing. Automatic classification of the 1867 map proved difficult, but its manual digitization could benefit from object-based image segmentation. Classifying digital aerial images was more accurate via the object-based than pixel-based method, but only if the images were segmented appropriately. In the object-based classification, spectral-based features were much more important than shape/geometry features, as ranked by RF. During the 147 years, 32% of the region changed in land type. Settlement and roads increased in extent by 1850% and 691%, respectively, and woodland decreased by 19%. These changes fragmented the landscape, altered the hydrological regime, and affected river morphology. The utility of old maps exemplified here provides an impetus for exploring and leveraging extant old maps or historical records to support land-use and global change research. Our study also connotes the importance of geotagging current data, such as photos and videos, that may serve as a baseline to document future landscape change.

Historical map, object-based, Random Forests, old ↗

Observational requirements for Lyα forest tomographic mapping of large-scale structure at z ∼ 2

The z ≳ 2 Lyα forest traces the underlying dark matter distribution on large scales and, given sufficient sightlines, can be used to create three-dimensional (3D) maps of large-scale structures. We examine the observational requirements to construct such maps and estimate the signal-to-noise as a function of exposure time and sightline density. Sightline densities at z = 2.25 are n {sub los} ≈ [360, 1200, 3300] deg{sup –2} at limiting magnitudes of g = [24.0, 24.5, 25.0], resulting in transverse sightline separations of (d ) ≈ [3.6, 1.9, 1.2] h {sup –1} Mpc, which roughly sets the reconstruction scale. We simulate these reconstructions using mock spectra with realistic noise properties and find that spectra with S/N ≈ 4 per angstrom can be used to generate maps that clearly trace the underlying dark matter at overdensities of ρ/(ρ) ∼ 1. For the VLT/VIMOS spectrograph, exposure times t {sub exp} = [4, 6, 10] hr are sufficient for maps with spatial resolution ε{sub 3D} = [5.0, 3.2, 2.3] h {sup –1} Mpc. Assuming ∼250 h {sup –1} Mpc is probed along the line of sight, 1 deg{sup 2} of survey area would cover a comoving volume of ≈10{sup 6} h {sup –3} Mpc{sup 3} at (z) ∼ 2.3, enabling the efficient mapping of large volumes with 8-10 m telescopes. These maps could be used to study galaxy environments, the topology of large-scale structures at high z, and to detect proto-clusters.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulating the large-scale structure of HI intensity maps

Intensity mapping of neutral hydrogen (HI) is a promising observational probe of cosmology and large-scale structure. We present wide field simulations of HI intensity maps based on N-body simulations of a 2.6 Gpc / h box with 2048{sup 3} particles (particle mass 1.6 × 10{sup 11} M{sub ⊙} / h). Using a conditional mass function to populate the simulated dark matter density field with halos below the mass resolution of the simulation (10{sup 8} M{sub ⊙} / h < M{sub halo} < 10{sup 13} M{sub ⊙} / h), we assign HI to those halos according to a phenomenological halo to HI mass relation. The simulations span a redshift range of 0.35 ∼< z ∼< 0.9 in redshift bins of width Δ z ≈ 0.05 and cover a quarter of the sky at an angular resolution of about 7'. We use the simulated intensity maps to study the impact of non-linear effects and redshift space distortions on the angular clustering of HI. Focusing on the autocorrelations of the maps, we apply and compare several estimators for the angular power spectrum and its covariance. We verify that these estimators agree with analytic predictions on large scales and study the validity of approximations based on Gaussian random fields, particularly in the context of the covariance. We discuss how our results and the simulated maps can be useful for planning and interpreting future HI intensity mapping surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymmetric neighborhood functions accelerate ordering process of self-organizing maps

A self-organizing map (SOM) algorithm can generate a topographic map from a high-dimensional stimulus space to a low-dimensional array of units. Because a topographic map preserves neighborhood relationships between the stimuli, the SOM can be applied to certain types of information processing such as data visualization. During the learning process, however, topological defects frequently emerge in the map. The presence of defects tends to drastically slow down the formation of a globally ordered topographic map. To remove such topological defects, it has been reported that an asymmetric neighborhood function is effective, but only in the simple case of mapping one-dimensional stimuli to a chain of units. In this paper, we demonstrate that even when high-dimensional stimuli are used, the asymmetric neighborhood function is effective for both artificial and real-world data. Our results suggest that applying the asymmetric neighborhood function to the SOM algorithm improves the reliability of the algorithm. In addition, it enables processing of complicated, high-dimensional data by using this algorithm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robot Navigation in a Rich Information Map for Inspection in Nuclear Environments - 18596

This paper discusses our approach of using an unmanned ground vehicle (UGV) to perform inspection tasks in nuclear environments. To reduce people's exposure to the environment with elevated radiation levels, our goal is enabling UGV to navigate and perform inspections fully autonomous with no human getting involved. To achieve the full automation, the UGV can take use of a rich information map. In traditional robot navigation, the 2D global cost map used for planning path consists only obstacle locations, while a rich information map also includes location information of interested objects to robot. The UGV can then use a rich information map to perform routine inspection tasks with known object locations. In this paper, we will present our method of generating a rich information map and the usage of this map for International Atomic Energy Agency (IAEA) Robotics Challenge. (authors)

42 ENGINEERING↗

A new flow pattern map for flow boiling of R410A in horizontal micro-fin tubes considering the effect of the helix angle

This paper presents an improved flow pattern map for flow boiling in horizontal micro-fin tubes considering the effect of helix angle. The proposed map is modified from the one developed for horizontal smooth tubes by Wojtan et al. (2005) and takes the early transition to annular flow due to micro-fin geometry into account. Visualization of R410A flow boiling is carried out through the transparent smooth and micro-fin tubes with 0°, 10° and 18° helix angle and plotted on the proposed map for comparison. The result shows that the flow pattern map for micro-fin tube with 0° helix angle is generally similar to that for the smooth tube. For the tube with 10° and 18° helix angle, the annular flow occurs at lower vapor quality and lower mass flux. The proposed map shows good agreements when compared with the visualization and reflects the downward shift (to lower mass flux and vapor quality conditions) of the SW-WA transition with the increase of the helix angle. In order to further validate the proposed model, the flow pattern transitions calculated from the equations are also compared with the experimental data of the micro-fin tube in literature. The results show that the modified map increase the prediction accuracy of the flow patterns in the micro-fin tube.

42 ENGINEERING↗

A method to correct coordinate distortion in EBSD maps

Drift during electron backscatter diffraction mapping leads to coordinate distortions in resulting orientation maps, which affects, in some cases significantly, the accuracy of analysis. A method, thin plate spline, is introduced and tested to correct such coordinate distortions in the maps after the electron backscatter diffraction measurements. The accuracy of the correction as well as theoretical and practical aspects of using the thin plate spline method is discussed in detail. By comparing with other correction methods, it is shown that the thin plate spline method is most efficient to correct different local distortions in the electron backscatter diffraction maps. - Highlights: • A new method is suggested to correct nonlinear spatial distortion in EBSD maps. • The method corrects EBSD maps more precisely than presently available methods. • Errors less than 1–2 pixels are typically obtained. • Direct quantitative analysis of dynamic data are available after this correction.

36 MATERIALS SCIENCE↗

The continuity of the output entropy of positive maps

Global and local continuity conditions for the output von Neumann entropy for positive maps between Banach spaces of trace-class operators in separable Hilbert spaces are obtained. Special attention is paid to completely positive maps: infinite dimensional quantum channels and operations. It is shown that as a result of some specific properties of the von Neumann entropy (as a function on the set of density operators) several results on the output entropy of positive maps can be obtained, which cannot be derived from the general properties of entropy type functions. In particular, it is proved that global continuity of the output entropy of a positive map follows from its finiteness. A characterization of positive linear maps preserving continuity of the entropy (in the following sense: continuity of the entropy on an arbitrary subset of input operators implies continuity of the output entropy on this subset) is obtained. A connection between the local continuity properties of two completely positive complementary maps is considered. Bibliography: 21 titles.

97 MATHEMATICS AND COMPUTING↗

EXTINCTION MAP OF THE SMALL MAGELLANIC CLOUD BASED ON THE SIRIUS AND 6X 2MASS POINT SOURCE CATALOGS

In this paper, we present the first extinction map of the Small Magellanic Cloud (SMC) constructed using the color excess at near-infrared wavelengths. Using a new technique named {sup X} percentile method{sup ,} which we developed recently to measure the color excess of dark clouds embedded within a star distribution, we have derived an E(J - H) map based on the SIRIUS and 6X Two Micron All Sky Survey (2MASS) star catalogs. Several dark clouds are detected in the map derived from the SIRIUS star catalog, which is deeper than the 6X 2MASS catalog. We have compared the E(J - H) map with a model calculation in order to infer the locations of the clouds along the line of sight, and found that many of them are likely to be located in or elongated toward the far side of the SMC. Most of the dark clouds found in the E(J - H) map have counterparts in the CO clouds detected by Mizuno et al. with the NANTEN telescope. A comparison of the E(J - H) map with the virial mass derived from the CO data indicates that the dust-to-gas ratio in the SMC varies in the range A{sub V} /N {sub H} = 1-2 x 10{sup -22} mag H{sup -1} cm{sup 2} with a mean value of {approx}1.5 x 10{sup -22} mag H{sup -1} cm{sup 2}. If the virial mass underestimates the true cloud mass by a factor of {approx}2, as recently suggested by Bot et al., the mean value would decrease to {approx}8x10{sup -23} mag H{sup -1} cm{sup 2}, in good agreement with the value reported by Gordon et al., 7.59 x 10{sup -23}mag H{sup -1} cm{sup 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

Extinction maps toward the Milky Way bulge: Two-dimensional and three-dimensional tests with apogee

Galactic interstellar extinction maps are powerful and necessary tools for Milky Way structure and stellar population analyses, particularly toward the heavily reddened bulge and in the midplane. However, due to the difficulty of obtaining reliable extinction measures and distances for a large number of stars that are independent of these maps, tests of their accuracy and systematics have been limited. Our goal is to assess a variety of photometric stellar extinction estimates, including both two-dimensional and three-dimensional extinction maps, using independent extinction measures based on a large spectroscopic sample of stars toward the Milky Way bulge. We employ stellar atmospheric parameters derived from high-resolution H-band Apache Point Observatory Galactic Evolution Experiment (APOGEE) spectra, combined with theoretical stellar isochrones, to calculate line-of-sight extinction and distances for a sample of more than 2400 giants toward the Milky Way bulge. We compare these extinction values to those predicted by individual near-IR and near+mid-IR stellar colors, two-dimensional bulge extinction maps, and three-dimensional extinction maps. The long baseline, near+mid-IR stellar colors are, on average, the most accurate predictors of the APOGEE extinction estimates, and the two-dimensional and three-dimensional extinction maps derived from different stellar populations along different sightlines show varying degrees of reliability. We present the results of all of the comparisons and discuss reasons for the observed discrepancies. We also demonstrate how the particular stellar atmospheric models adopted can have a strong impact on this type of analysis, and discuss related caveats.

79 ASTRONOMY AND ASTROPHYSICS↗

THE STRUCTURE OF THE BROAD-LINE REGION IN ACTIVE GALACTIC NUCLEI. I. RECONSTRUCTED VELOCITY-DELAY MAPS

We present velocity-resolved reverberation results for five active galactic nuclei. We recovered velocity-delay maps using the maximum entropy method for four objects: Mrk 335, Mrk 1501, 3C 120, and PG 2130+099. For the fifth, Mrk 6, we were only able to measure mean time delays in different velocity bins of the H{beta} emission line. The four velocity-delay maps show unique dynamical signatures for each object. For 3C 120, the Balmer lines show kinematic signatures consistent with both an inclined disk and infalling gas, but the He II {lambda}4686 emission line is suggestive only of inflow. The Balmer lines in Mrk 335, Mrk 1501, and PG 2130+099 show signs of infalling gas, but the He II emission in Mrk 335 is consistent with an inclined disk. We also see tentative evidence of combined virial motion and infalling gas from the velocity-binned analysis of Mrk 6. The maps for 3C 120 and Mrk 335 are two of the most clearly defined velocity-delay maps to date. These maps constitute a large increase in the number of objects for which we have resolved velocity-delay maps and provide evidence supporting the reliability of reverberation-based black hole mass measurements.

79 ASTRONOMY AND ASTROPHYSICS↗

Lensing reconstruction from a patchwork of polarization maps

The lensing signals involved in CMB polarization maps have already been measured with ground-based experiments such as SPTpol and POLARBEAR, and would become important as a probe of cosmological and astrophysical issues in the near future. Sizes of polarization maps from ground-based experiments are, however, limited by contamination of long wavelength modes of observational noise. To further extract the lensing signals, we explore feasibility of measuring lensing signals from a collection of small sky maps each of which is observed separately by a ground-based large telescope, i.e., lensing reconstruction from a patchwork map of large sky coverage organized from small sky patches. We show that, although the B-mode power spectrum obtained from the patchwork map is biased due to baseline uncertainty, bias on the lensing potential would be negligible if the B-mode on scales larger than the blowup scale of 1/f noise is removed in the lensing reconstruction. As examples of cosmological applications, we also show 1) the cross-correlations between the reconstructed lensing potential and full-sky temperature/polarization maps from satellite missions such as PLANCK and LiteBIRD, and 2) the use of the reconstructed potential for delensing B-mode polarization of LiteBIRD observation.

79 ASTRONOMY AND ASTROPHYSICS↗