Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

High power impulse magnetron sputtering and related discharges: scalable plasma sources for plasma-based ion implantation and deposition

High power impulse magnetron sputtering (HIPIMS) and related self-sputtering techniques are reviewed from a viewpoint of plasma-based ion implantation and deposition (PBII&D). HIPIMS combines the classical, scalable sputtering technology with pulsed power, which is an elegant way of ionizing the sputtered atoms. Related approaches, such as sustained self-sputtering, are also considered. The resulting intense flux of ions to the substrate consists of a mixture of metal and gas ions when using a process gas, or of metal ions only when using `gasless? or pure self-sputtering. In many respects, processing with HIPIMS plasmas is similar to processing with filtered cathodic arc plasmas, though the former is easier to scale to large areas. Both ion implantation and etching (high bias voltage, without deposition) and thin film deposition (low bias, or bias of low duty cycle) have been demonstrated.

36 MATERIALS SCIENCE↗

Magnetron-Sputtered Ni-Cr and Ti-Si Layers to Protect Ti-46Al-8Nb (at.%) Substrates Against Gas Absorption

Ni-Cr and Ti-Si layers were deposited by magnetron sputtering on Ti-46Al-8Nb (at.%) substrates to suppress penetration of gases, which brings about undesirable changes in mechanical properties. Alloy samples with and without surface protection were subjected to interrupted oxidation at elevated temperature (700 and 800 °C) for up to 300 h. Selected mechanical properties as well as adhesion of surface layers were examined in the as-received and oxidized state. Analytical techniques used to characterize surfaces and cross sections of the samples included scanning electron microscopy and light microscopy, energy-dispersive x-ray spectroscopy, x-ray photoelectron spectroscopy and x-ray diffraction. Both investigated layers were sufficiently adherent and effective in hindering gas absorption at 700 °C; however, only Ni-Cr showed promising properties for higher-temperature applications.

36 MATERIALS SCIENCE↗

Grid-assisted magnetron sputtering deposition of nitrogen graded TiN thin films

Titanium Nitride (TiN) films were obtained using the grid-assisted magnetron sputtering deposition technique on Al substrates in two conditions: under constant and variable nitrogen concentration along the thin solid film thickness. The formation of a film with variable N concentration (herein referred as graded film) was confirmed using energy filtered transmission electron microscopy, X-ray photoelectron spectroscopy and grazing incidence X-ray diffraction. The TiN thin films microstructures were also analysed using scanning and transmission electron microscopies (SEM and TEM). Finally, the viability of synthesizing TiN thin films with variable N concentration is herein proposed as an alternative method for tailoring the properties of such functional coating materials.

36 MATERIALS SCIENCE↗

Synthesis and characterization of dense Gd 2 Ti 2 O 7 pyrochlore thin films deposited using RF magnetron sputtering

Thin films of phase-pure pyrochlore Gd 2 Ti 2 O 7 have been synthesized by RF magnetron sputtering. The films were prepared from oxide targets in 50% O 2 /Ar atmosphere and deposited on 111 yttria-stabilized zirconia (YSZ) substrates at a temperature of 800 °C. The pyrochlore structure was confirmed via grazing angle X-ray diffraction and selected area electron diffraction (SAED). Transmission electron microscopy (TEM) analysis also showed that the films were dense and of uniform thickness with surface roughness of approximately 8 nm. The total conductivity measured with AC impedance spectroscopy was found to be independent of thickness and comparable in magnitude to that of bulk Gd 2 Ti 2 O 7 . Differences were observed in the Arrhenius behavior between the bulk and thin film samples and are attributed to varying states of order in the crystalline lattice compounded by different levels of background impurities.

36 MATERIALS SCIENCE↗

Enhanced properties of tungsten films by high-power impulse magnetron sputtering

Tungsten films (750–1200 nm thick) deposited by high-power impulse magnetron sputtering (HiPIMS) under various sputtering gas pressure and substrate bias are investigated for their physical and microstructural characteristics. Compared to films deposited by the traditional direct current (DC) method with the same deposition configuration and similar parameters, HiPIMS materials exhibit higher hardness, a smoother surface, and better adhesion to a substrate. These excellent properties are attributed to the highly uniform grain structures developed during HiPIMS deposition, in contrast to the funnel shaped grains seen in DC sputtered films. Finally, combined with the in-situ stress measurements, we discuss the underlying mechanisms that lead to enhanced properties of HiPIMS tungsten films.

36 MATERIALS SCIENCE↗

Neutron reflectometry investigations of interfacial structures of Ti/TiN layers deposited by magnetron sputtering

We report that nanolayered metal-ceramic composite systems provide the possibility to produce new materials with exceptional strength, toughness, and radiation resistance not exhibited by their individual constituents. The unusual behaviors are frequently attributed to the high density of internal interfaces. Most layered structures studied to date contain sharp interfaces and the synthesis of more diffuse interfacial structures, where the interface is graded out of the interface plane, has not been deeply explored. Here we show how neutron reflectometry was used to study the structure of magnetron sputter deposited titanium and titanium nitride (Ti/TiN) layers as a function of deposition parameters: temperature, rate of N 2 flow or pressure, electrical bias applied to the sample, and orientation of the ion source relative to the sample. These different deposition and post-processing strategies resulted in profound changes in the structure of the interfacial region between the two components in Ti/TiN x bilayers. Finally, the results show that temperature and low step-wise N 2 flow rates, but not electrical bias, can form graded interfaces in a controlled manner.

36 MATERIALS SCIENCE↗

Commissioning of a modulated pulse-power magnetron sputtering system for depositing niobium thin films

A modulated pulse-power magnetron sputtering system (MPPMS) was commissioned and used to deposit niobium on copper. MPPMS utilizes a modulated pulse train with high peak-to-average energy ratios, thereby increasing the energy density leading to the production of the energetic ions. The MPPMS modulator was designed and constructed based on large voltage/current IGBT modules, which can be externally modulated, produce bi-polar waveforms, and are readily available. A high voltage power supply provides moderate current to the IGBT module to create the precise pulse structure. The MPPMS system was used to deposit ~1 mm thick, niobium film on a copper substrate held at ~77 K to minimize Nb atom surface diffusion and maximize intrinsic film energy. Finally, the Nb film had an average grain size of ~8 nm.

42 ENGINEERING↗

Oxygen and CO adsorption on Au/SiO 2 catalysts prepared by magnetron sputtering: The role of gold subsurface

Temporal Analysis of Products (TAP) reactor system is used to investigate CO oxidation behavior on Au/SiO 2 catalysts prepared via the physical vapor deposition method magnetron sputtering. Au/SiO 2 catalysts are a valuable model system for studying the reactivity of Au nanoparticles, since the SiO 2 support plays little role in the reaction. The adsorption of CO on the catalyst was studied under TAP vacuum conditions and at different temperatures. The heat of CO adsorption estimated from TAP results by moment analysis is -23.9 kJ/mol which is high compared to heat of CO adsorption reported by other TAP groups studying Au/TiO 2 catalysts [29]. The reaction over the catalyst pretreated with oxygen under different pretreatment pressures (vacuum pressures to 33.66 psia) was studied under TAP vacuum conditions via CO titration. It was found that the amount of oxygen available on the surface for CO oxidation is proportional to the pretreatment pressure.

36 MATERIALS SCIENCE↗

Noble gas retention in the target during rotating cylindrical magnetron sputtering

A rotating cylindrical magnetron with a Ti target was sputtered in pure Xe or in a mixture of Xe and N{sub 2}. The atomic composition of the target surface during sputtering has been investigated by in situ Rutherford backscattering spectrometry. The noble gas atomic ratio at the target surface is around 3.4% or 9.8% for sputtering in pure Xe and with 10% N{sub 2} addition, respectively. Energy resolved mass spectrometry reveals that some of the implanted Xe atoms are sputtered from the target. A radiation enhanced diffusion/detrapping/sputtering mechanism is proposed to model the flux of noble gas leaving the target during sputtering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fiber textures of titanium nitride and hafnium nitride thin films deposited by off-normal incidence magnetron sputtering

We studied the development of crystallographic texture in titanium nitride (TiN) and hafnium nitride (HfN) films deposited by off-normal incidence reactive magnetron sputtering at room temperature. Texture measurements were performed by x-ray pole figure analysis of the (111) and (200) diffraction peaks. For a deposition angle of 40 deg. from substrate normal, we obtained TiN biaxial textures for a range of deposition conditions using radio frequency (rf) sputtering. Typically, we find that the <111> orientation is close to the substrate normal and the <100> orientation is close to the direction of the deposition source, showing substantial in-plane alignment. We also introduced a 150 eV ion beam at 55 deg. with respect to substrate normal during rf sputtering of TiN. Ion beam enhancement caused TiN to align its out-of-plane texture along <100> orientation. In this case, (200) planes are slightly tilted with respect to the substrate normal away from the ion beam source, and (111) planes are tilted 50 deg. toward the ion beam source. For comparison, we found that HfN deposited at 40 deg. without ion bombardment has a strong <100> orientation parallel to the substrate normal. These results are consistent with momentum transfer among adatoms and ions followed by an increase in surface diffusion of the adatoms on (200) surfaces. The type of fiber texture results from a competition among texture mechanisms related to surface mobilities of adatoms, geometrical, and directional effects.

36 MATERIALS SCIENCE↗

In situ stress evolution during magnetron sputtering of transition metal nitride thin films

Stress evolution during reactive magnetron sputtering of TiN, ZrN, and TiZrN layers was studied using real-time wafer curvature measurements. The presence of stress gradients is revealed, as the result of two kinetically competing stress generation mechanisms: atomic peening effect, inducing compressive stress, and void formation, leading to a tensile stress regime predominant at higher film thickness. No stress relaxation is detected during growth interrupt in both regimes. A change from compressive to tensile stress is evidenced with increasing film thickness, Ti content, sputtering pressure, and decreasing bias voltage.

36 MATERIALS SCIENCE↗

Combined Thermochromic And Plasmonic: Optical Responses In Novel Nanocomposite Au-VO{sub 2} Films Prepared By RF Inverted Cylindrical Magnetron Sputtering

We prepared gold/Vanadium dioxide nanocomposites thin films by the rf reactive inverted cylindrical magnetron sputtering (ICMS) for the first time and report their enhanced surface plasmon resonance (SPR) tunable shift reversibility. ICMS has been attracting much attention for its ability for uniform coating of three-dimensional objects and high-rate deposition of dielectric materials. To investigate the optical properties of gold nanoparticles embedded in an active matrix (VO{sub 2}) composite film was synthesized on corning glass substrates for several substrate temperatures ranging from 400 deg. C to 600 deg. C. The X-ray diffraction results demonstrated that the Au and VO{sub 2} were well crystallized. The optical transmission properties were measured from 300nm to 1100nm and the absorption peak due to the surface plasmon resonance (SPR) of Au nanoparticles were observed. Under external temperature stimuli, the tunable reversibility of the SPR shift was observed when the nanocomposites temperature varies from 20 deg. C to 100 deg. C. The enhancement of this shift of SPR was observed as the substrate temperature increases and it was found that the shift of SPR increased rapidly with increasing substrate temperature but then remained constant at {approx}57 nm for substrate temperature higher than 500 deg. C.

36 MATERIALS SCIENCE↗

Structural Study And Optical Properties Of TiO{sub 2} Thin Films Elaborated By Thermal Oxidation Of RF Magnetron Sputtered Ti Films

We report on the effect of thickness on the structural and optical properties of TiO{sub 2} thin films obtained by direct exposure of Ti metal film to thermal oxidation. Ti thin films with thicknesses ranging from 87 nm to 484 nm were deposited onto glass substrate by RF magnetron sputtering. Thereafter, the as-deposited Ti films were annealed in air at temperature equal to 520 deg. C. The structural evolution and optical properties of obtained TiO{sub 2} films were studied by means of Rutherford backscattering spectrometry (RBS), grazing incidence X-ray diffraction (GIXRD), scanning electron microscopy (SEM) and UV-Visible spectroscopy. The films thicknesses were extracted from RBS spectra. From X-ray diffraction spectra, we can see that all the films present three TiO{sub 2} phases (anatase, rutile and Brookite). The anatase and rutile phases exhibit a strong preferred orientation along (004) and (210) planes respectively. The grain sizes, D (nm), did not change much with increasing thickness. The average value of <D>(nm) was equal to 29 nm for anatase and 26 nm for rutile. The micrographs taken from SEM experiments indicate that the films present a dense micro structure with very small grains. Transmittance spectra show that all the films present a good transparency in the visible region. The dependence of transmittance, optical band gap and refractive index on the thickness of the films was also studied.

36 MATERIALS SCIENCE↗

Quantification of the ion and momentum fluxes toward the substrate during reactive magnetron sputtering

The ion and momentum fluxes toward the growing film during reactive magnetron sputtering of a Ti target in a mixture of Ar and N{sub 2} are determined. For the ion flux and ion energy distribution a retarding field energy analyzer has been employed. The results were confronted with planar and cylindrical probe measurements, two more common used techniques. For the momentum flux, energy resolved mass spectrometry and simulations with the binary collision Monte Carlo code SIMTRA were performed to determine the contribution to this flux by the impact of ions and sputtered and reflected particles. Based on the quantification of both fluxes, it can be concluded that there is a relation between the hardness and elastic modulus of the TiN films and the momentum flux.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial growth of nickel on Si(100) by dc magnetron sputtering

The influence of the substrate temperature on the growth of highly textured Ni(111) and epitaxial Ni(200) with the relationships Ni[100] parallel Si[110] and Ni(001) parallel Si(001) on hydrogen terminated Si(100) wafer substrates by means of direct current magnetron sputtering is reported. In order to minimize crystal defect formation and to achieve a high quality epitaxial growth of Ni on Si, a two step deposition process was developed whereby different deposition conditions were used for an initial nickel seed layer and the remaining nickel film. The in-plane and out-of-plane structural properties of the films were investigated using x-ray scattering techniques, whereas magneto-optical Kerr effect and neutron reflectometry were used to confirm the magnetic nature of the epitaxially deposited nickel films.

36 MATERIALS SCIENCE↗

Effect of Bi{sub 2}O{sub 3} seed layer on crystalline orientation and ferroelectric properties of Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} thin films prepared by rf-magnetron sputtering method

Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} (BLT) thin films with Bi{sub 2}O{sub 3} seed layers were prepared on Pt(111)/Ti/SiO{sub 2}/Si substrate by rf-magnetron sputtering method. The effect of annealing procedure, thickness, and position of Bi{sub 2}O{sub 3} seed layer on the structural and electrical properties of BLT thin film was investigated. When using a two-step annealing procedure, the x-ray diffraction pattern indicated that BLT thin film with a Bi{sub 2}O{sub 3} seed layer showed c-axis preference orientation. Compared with Pt/BLT/Bi{sub 2}O{sub 3}/Pt structure film, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt structure film showed higher oriented to c direction. The ferroelectric property of BLT thin film improved remarkably with the incorporation of Bi{sub 2}O{sub 3} seed layer. Under the applied voltage of 14 V, the remnant polarization and coercive voltage of the Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3} capacitor with 18-nm-thick Bi{sub 2}O{sub 3} seed layer were 45.2 {mu}C/cm{sup 2} and 9.2 V, respectively. Moreover, the Pt/Bi{sub 2}O{sub 3}/BLT/Bi{sub 2}O{sub 3}/Pt film with 18-nm-thick Bi{sub 2}O{sub 3} seed layers exhibited good fatigue endurance even after 6x10{sup 9} switching cycles, which was attributed to the double-sided Bi{sub 2}O{sub 3} layer. They decreased the grain boundary density by enhancing the grain size of BLT film and enhanced the c-axis preferential orientation. Compared with BLT film deposited directly on Pt, double-sided Bi{sub 2}O{sub 3} layer would greatly enhance the leakage current resistance of the BLT film.

36 MATERIALS SCIENCE↗

Achieving high free electron mobility in ZnO:Al thin films grown by reactive pulsed magnetron sputtering

The study is focused on the improvement of the free electron mobility in Al-doped ZnO films grown by reactive pulsed magnetron sputtering. At optimum growth conditions low-absorbing films are obtained with a Hall mobility of 46 cm{sup 2} V{sup -1} s{sup -1}, a free electron density of 6.0x10{sup 20} cm{sup -3}, and an electrical resistivity of 2.26x10{sup -4} {omega} cm. The relation between the mobility and free electron density for different growth conditions is discussed in terms of ionized impurity scattering, impurity clustering, and grain boundary limited transport.

36 MATERIALS SCIENCE↗

Highly phosphorus-doped crystalline Si layers grown by pulse-magnetron sputter deposition

The electrical properties of highly phosphorus-doped crystalline silicon films deposited by pulse-magnetron sputtering were studied. The films were grown, 450 nm thick, on Si(100) and Si(111) wafers at low substrate temperatures T{sub s} of 450-550 deg. C and post-treated by rapid thermal annealing (RTA) and plasma hydrogenation (PH). In the case of films grown on Si(100), at all values of T{sub s} postgrowth treatment by RTA resulted in an increase in the dopant activation up to 100% and of the Hall mobility to about bulklike values of 50 cm{sup 2} V{sup -1} s{sup -1}. This result suggests high structural quality of the films on Si(100). The Si(111) films, which are typically more defective, exhibit a completely different behavior with a strong dependence of the electrical dopant activation and the Hall mobility on T{sub s}. By post-treatment a maximum P donor activation level of 22% could be obtained. The variation in the post-treatment procedure (RTA+PH and PH+RTA) for the films deposited at high T{sub s} showed that PH results only in minor changes in the film properties. The different influence of RTA and PH is discussed in terms of the different defect structure of the films. These investigations reveal that high T{sub s} and after-treatment by RTA are the main preconditions for optimal electrical film properties.

36 MATERIALS SCIENCE↗