Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNESIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Influence of the w/c ratio on the hydration process of a magnesium phosphate cement and on its retardation by boric acid

Magnesium potassium phosphate cements (MKPCs) are prepared using calcined magnesia (MgO) and an acidic solution of potassium dihydrogen phosphate (KH{sub 2}PO{sub 4}). Their fast setting and high heat of hydration can be problematic when large volumes of materials are produced. Boric acid (B(OH){sub 3}) is thus commonly added as a set retarder. This work investigates MKPC hydration in paste (water-to-cement ratio w/c = 1) and its retardation by B(OH){sub 3}. The precipitation of K-struvite (MgKPO{sub 4}·6H{sub 2}O) is preceded by that of phosphorösslerite (MgHPO{sub 4}·7H{sub 2}O) and Mg{sub 2}KH(PO{sub 4}){sub 2}·15H{sub 2}O. Cattiite (Mg{sub 3}(PO{sub 4}){sub 2}·22H{sub 2}O), an end-product in diluted suspension (w/c = 100), is not observed. B(OH){sub 3} slows down the formation of hydrates in two ways: (i) by stabilizing in solution the cations that outbalance the negative charges of the polyborates formed at pH above 6, and (ii) through the precipitation of an amorphous mineral containing borate and orthophosphate. The first process occurs both in diluted suspensions and pastes, the second is specific to pastes.

36 MATERIALS SCIENCE↗

Vanadium Oxide Pillared by Interlayer Mg 2+ Ions and Water as Ultralong-Life Cathodes for Magnesium-Ion Batteries

Magnesium-ion batteries (MIBs) show great potential for large-scale energy storage because of the advantages of low cost and safety, but their application is severely hindered by the difficulty in finding desirable electrode materials. In this work, we develop a bilayer-structured vanadium oxide (Mg 0.3 V 2 O 5 ·1.1H 2 O) with synergistic effect of Mg 2+ ions and lattice water as the cathode material for MIBs. The pre-intercalated Mg 2+ ions provide high electronic conductivity and excellent structural stability. The lattice water enables fast Mg 2+ ions mobility because of its charge shielding effect. As a result, the Mg 0.3 V 2 O 5 ·1.1H 2 O exhibits excellent rate performance and an unprecedented cycling life with capacity retention of 80.0% after 10,000 cycles. Furthermore, the Mg 0.3 V 2 O 5 ·1.1H 2 O exhibits good electrochemical performance in full MIBs. This scalable Mg 2+ host material is an enticing candidate as a cathode for MIBs, and its high performance is expected to meet the requirements for large-scale storage applications.

25 ENERGY STORAGE↗

Progress in development of electrolytes for magnesium batteries

Over the last few years, there has been an increased interest in developing safe, next-generation battery systems that offer energy densities higher than those of lithium-based batteries. In this context, batteries based on multivalent-ions (Mg 2+ , Zn 2+ , Ca 2+ , and Al 3+ ) have developed their own niche with their capability to achieve at least twice the energy density of monovalent-ion systems such as Li-ion and Na-ion batteries. Among the multivalent-ion battery candidates, magnesium (Mg) batteries appear to be the most viable choice to eventually replace the Li-ion technology because of the high electrode potential, superior safety, and high abundance of Mg-metal. However, the limited development in electrolytes and cathodes has prevented their commercialization to date. There is a lack of suitable electrolytes that can be used at high voltages required for Mg 2+ insertion into cathode hosts. The limited compatibility of organic electrolytes with Mg-metal anode is also a challenge, which requires extensive studies of the metal/electrolyte interactions. Such studies over the last two decades were critical in developing state-of-the-art Mg electrolytes that possess voltage windows of >4.0 V and simultaneously be compatible with Mg-metal anodes. Here, we present a review on the development of Mg battery electrolytes, challenges that impede their performance, and promising strategies that have been adopted to address them. As a result, we believe that this comprehensive review covering all three categories of Mg electrolytes (liquids, polymers, and solids) would enable researchers to get a quick grasp of the prevailing challenges, and consequently motivate them to develop novel electrolyte candidates.

25 ENERGY STORAGE↗

Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy

Galvanic corrosion of a dissimilar friction stir welded 2024-T3 Al/AZ31B-H24 Mg joint prepared using a water-based and a non-water-based polishing solution was characterized. Microstructure and the distribution of chemical elements were analyzed using optical microscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy. The stir zone polished using water-based solution was observed to be much more susceptible to galvanic corrosion attack than that obtained using non-water-based polishing solution. The location of corrosion attack was observed in the narrow regions of AZ31 Mg alloy adjacent to Al2024 regions in the stir zone. The occurrence of galvanic corrosion was due to the formation of Mg/Al galvanic couples with a small ratio of anode-to-cathode surface area. The corrosion product was primarily the porous magnesium hydroxide with characteristic microcracks and exhibited a low microhardness value.

36 MATERIALS SCIENCE↗

The corrosion performance of die-cast magnesium alloy MRI230D in 3.5% NaCl solution saturated with Mg(OH){sub 2}

The environmental behavior of die-cast magnesium alloy MRI230D designated for high-temperature applications was evaluated in comparison with regular AZ91D alloy. The microstructure examination was carried out using SEM, TEM, and X-ray diffraction analysis; the corrosion performance in 3.5% NaCl solution was evaluated by immersion test, salt spray testing, potentiodynamic polarization analysis, and stress corrosion behavior by Slow Strain Rate Testing (SSRT). Although the general corrosion resistance of MRI230D was slightly improved compared to that of AZ91D alloy its stress corrosion resistance was relatively reduced. The variations in the environmental behavior of the two alloys were mainly due to the differences in their chemical composition and microstructure after die casting. In particular, the differences were related to the reduced Al content in MRI230D and the addition of Ca to this alloy, which consequently affected its relative microstructure and electrochemical characteristics. - Research Highlights: {yields}Corrosion and SCC resistance of a new Mg alloy MRI230D was evaluated vs. regular AZ91D. {yields}MRI230D has a minor advantage in corrosion performance compared with AZ91D. {yields}The SCC resistance of MRI230D by SSRT analysis was relatively reduced. {yields}The reduced SCC resistance of MRI230D was due to the detrimental effect of Ca on ductility.

36 MATERIALS SCIENCE↗

Phase constitution in the interfacial region of laser penetration brazed magnesium–steel joints

The phase constitution in the interfacial region of laser penetration brazed magnesium–steel joints was investigated using electron microscopy. From the distribution of elements, the transition zone was mainly composed of elements Mg and Fe along with some Al and O. Furthermore, the transition layer consisted mainly of intermetallic compounds and metal oxides. The compounds were identified as Al-rich phases, such as Mg{sub 17}Al{sub 12}, Mg{sub 2}Al{sub 3}, FeAl and Fe{sub 4}Al{sub 13}. More noteworthy was that the thickness of the transition layer was determined by Fe–Al compounds. The presence of FeAl and Fe{sub 4}Al{sub 13} was a result of the complex processes that were associated with the interfacial reaction of solid steel and liquid Mg–Al alloy. - Highlights: • A technology of laser penetration brazed Mg alloy and steel has been developed. • The interface of Mg/Fe dissimilar joints was investigated using electron microscopy. • The transition layer consisted of intermetallic compounds and metal oxides. • Moreover, the thickness of transition layer was determined by Fe/Al compounds. • The presence of FeAl and Fe{sub 4}Al{sub 13} was associated with the interfacial reaction.

36 MATERIALS SCIENCE↗

Physical and absorption properties of titanium nanoparticles incorporated into zinc magnesium phosphate glass

We report the influences of Titania (TiO{sub 2}) nanoparticles (NPs) on the physical and optical properties of melt quench synthesized zinc magnesium phosphate glasses. Five glass samples with composition (42 − x)P{sub 2}O{sub 5}–50ZnO–8MgO–xTiO{sub 2}, where x = 0, 1, 2, 3, 4 mol% are prepared and characterized. XRD pattern verified the amorphous nature of all samples. TEM images manifested the growth of Ti NPs of average size ≈ 5.78 nm. TiO{sub 2} NP concentration dependent variation in the physical properties including glass density, molar volume, molar refractivity, electronic polarizability and ionic packing density are determined. The values of glass refractive indices, density and ionic packing density are increased with the increase of TiO{sub 2} NP contents. Conversely, the Urbach energy, direct and indirect optical band gap are found to decrease with the increase of TiO{sub 2} NP concentration. These glass compositions may be potential for various solid state devices including laser. - Highlights: • TiO{sub 2} NP embedded self-cleaning phosphate glass are synthesized for the first time. • Well dispersed and uniform sized TiO{sub 2} NPs are grown. • Absorption spectra revealed prominent peak in the UV region. • TiO{sub 2} NPs strongly influenced the physical and absorption features of synthesized glasses. • The effects of TiO{sub 2} NPs on the physical and optical properties of these glasses are determined.

36 MATERIALS SCIENCE↗

Ferroelectricity in Atomic Layer Deposited Wurtzite Zinc Magnesium Oxide Zn 1– x Mg x O

Conformal deposition of wurtzite ferroelectrics, which is needed for their use in scaled nonvolatile memories, is challenging using current physical vapor deposition techniques. To overcome the conformality barrier, this work demonstrates ferroelectricity in wurtzite Zn 1− x Mg x O thin films prepared by plasma-enhanced atomic layer deposition, which is a non-line-of-sight deposition method. Films ranging in composition from x = 0.00 to x = 0.58 are predominantly wurtzite phase and exhibit a (0001)-texture. Increasing the magnesium content decreases the c/a ratio, increases the optical bandgap energy, increases the piezoelectric response, and enables polarization reversal. Clear polarization switching is demonstrated in 50 nm thick Zn 1− x Mg x O films by piezoresponse force microscopy in compositions containing x = 0.46 and x = 0.58.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enabling Magnesium Anodes by Tuning the Electrode/Electrolyte Interfacial Structure

Here, a new deposition mechanism is presented in this study to achieve highly reversible plating and stripping of magnesium (Mg) anodes for Mg-ion batteries. It is known that the reduction of electrolyte anions such as bi s (trifluoromethanesulfonyl) imide (TFSI - ) causes Mg surface passivation, resulting in poor electrochemical performance for Mg-ion batteries. We reveal that the addition of sodium cations (Na + ) in Mg-ion electrolytes can fundamentally alter the interfacial chemistry and structure at the Mg anode surface. The molecular dynamics simulation suggests that Na + cations contribute to a significant population in the interfacial double layer so that TFSI - anions are excluded from the immediate interface adjacent to the Mg anode. As a result, the TFSI - decomposition is largely suppressed so does the formation of passivation layers at the Mg surface. This mechanism is supported by our electrochemical, microscopic, and spectroscopic analyses. The resultant Mg deposition demonstrates smooth surface morphology and lowered overpotential compared to the pure Mg(TFSI) 2 electrolyte.

25 ENERGY STORAGE↗

Passivation dynamics in the anisotropic deposition and stripping of bulk magnesium electrodes during electrochemical cycling

Rechargeable magnesium (Mg) batteries show promise for use as a next generation technology for high-density energy storage, though little is known about the Mg anode solid electrolyte interphase and its implications for the performance and durability of a Mg-based battery. We explore in this report passivation effects engendered during the electrochemical cycling of a bulk Mg anode, characterizing their influences during metal deposition and dissolution in a simple, nonaqueous, Grignard electrolyte solution (ethylmagnesium bromide, EtMgBr, in tetrahydrofuran). Scanning electron microscopy images of Mg foil working electrodes after electrochemical polarization to dissolution potentials show the formation of corrosion pits. The pit densities so evidenced are markedly potential-dependent. When the Mg working electrode is cycled both potentiostatically and galvanostatically in EtMgBr these pits, formed due to passive layer breakdown, act as the foci for subsequent electrochemical activity. Detailed microscopy, diffraction, and spectroscopic data show that further passivation and corrosion results in the anisotropic stripping of the Mg {0001} plane, leaving thin oxide-comprising passivated side wall structures that demark the {0001} fiber texture of the etched Mg grains. Upon long-term cycling, oxide side walls formed due to the pronounced crystallographic anisotropy of the anodic stripping processes, leading to complex overlay anisotropic, columnar structures, exceeding 50 μm in height. Finally, the passive responses mediating the growth of these structures appear to be an intrinsic feature of the electrochemical growth and dissolution of Mg using this electrolyte.

36 MATERIALS SCIENCE↗

Modelling of Superplastic Forming of AZ31 Magnesium Alloy

In this study the constitutive equation of the superplastic AZ31 magnesium-based alloy is modelled by the power law relationship between the stress, the strain and the strain-rate and an accurate procedure for determining the constants of the material is presented. Moreover, the problem of optimizing the pressure-time load curve of a free forming process is investigated and resolved by means of a pressure jump forming process. The experimental tests, carried out to support the finite-element modelling, have shown good agreement between the numerical results and the experimental data.

36 MATERIALS SCIENCE↗

Effect of Magnesium Doping on Structural and Optical Properties of ZnO Nanoparticles Synthesized by Mechanochemical Processing

This paper presents the structural and optical properties of magnesium doped zinc oxide nanoparticles synthesized by mechanochemical processing. ZnO nanoparticles of different crystallite size were synthesized by milling the precursor materials for 5 h in a high energy planetary ball mill in Zr{sub 2}O{sub 3} media. NaCl was added as diluent to control the reaction rate in order to avoid the growth of nanoparticles. The milled powders were heat treated at 600 deg. C and then NaCl was leached out using distilled water. X-ray Diffraction (XRD) technique was employed for the phase and crystallite size analysis of the nanoparticles. Crystallite sizes were calculated from the XRD peak broadening using the Sherrer's formula. Scanning Electron Microscope was employed to analyze the particle morphology and size distribution of the Mg doped ZnO nanoparticles. Ultraviolet-Visible (Uv-Vis) spectroscope also was employed to analyze the optical absorption of the ZnO nano particles. Tauc plots were used to determine the energy gap of the nanoparticles samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combustion Synthesis of Magnesium Aluminate

In the system MgO-Al{sub 2}O{sub 3}, three compounds MgAl{sub 2}O{sub 4}, MgAl{sub 6}O{sub 10}(also expressed as-Mg{sub 0.4}Al{sub 2.4}O{sub 4}) and MgAl{sub 26}O{sub 40} are well known. Importance of the first two is well established. Magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel is a technologically important material due to its interesting thermal properties. The MgAl{sub 2}O{sub 4} ceramics also find application as humidity sensors. Apart from the luminescence studies, the interest in MgAl{sub 2}O{sub 4} is due to various applications such as humidity-sensing and PEM fuel cells, TL/OSL dosimetry of the ionizing radiations, white light source. Interest in the MgAl{sub 6}O{sub 10} has aroused due to possible use as a substrate for GaN growth. Attempt was made to synthesize these compounds by the combustion synthesis using metal nitrates as oxidizer and urea as a fuel. Compounds MgAl{sub 2}O{sub 4} and MgAl{sub 6}O{sub 10} were formed in a single step, while MgAl{sub 26}O{sub 40} was not formed by this procedure. Activation of MgAl{sub 6}O{sub 10} by rare earth ions like Ce{sup 3+}, Eu{sup 3+} and Tb{sup 3+} and ns{sup 2} ion Pb{sup 2+} could be achieved. Excitation bands for MgAl{sub 6}O{sub 10} are at slightly shorter wavelengths compared to those reported for MgAl{sub 2}O{sub 4}.

36 MATERIALS SCIENCE↗

Dynamics of a Lüders Band and Destruction of an Aluminum-Magnesium Alloy, Initiated by a Stress Concentrator

Spatio-temporal localization of deformation and the rupture of the aluminum-magnesium AlMg6 alloy, initiated by a geometrical stress concentrator, are studied in situ by video recording at a speed of 500 to 20000 frames/s. It is established that a stress concentrator in the form of a small notch with a depth about 1% of the width of a flat specimen is an attractor of bands of macrolocalized plastic deformation, starting from a Lüders band and ending with the start of the main crack. The key role of intersecting deformation macrobands in the development of the main crack is revealed. Possible micromechanisms of viscous destruction associated with the dynamics of the intersection of deformation bands are discussed.

36 MATERIALS SCIENCE↗

Nanofiltration Results: Membrane Removal of Calcium, Magnesium, Sodium, Silica, Lithium, Chlorine, and Sulfate from Simulated Geothermal Brines

Results from a nanofiltration study utilizing simulated geothermal brines. The data includes a PDF documenting the process used to remove Calcium, Magnesium, Sodium, Silica, Lithium, Chlorine, and Sulfate from simulated geothermal brines. Three different membranes were evaluated. The results were analyzed using inductively coupled plasma mass spectrometry (ICP-MS).

15 GEOTHERMAL ENERGY↗

Enhanced Corrosion of Magnesium as a Treatment for Legacy SNF - 19369

The ability of high concentrations of MgCl{sub 2} to induce activity-controlled dissolution of magnesium has been investigated in the context of providing a means of stabilising reactive metal fuel wastes, as oxide/hydroxide corrosion products, to enhance the resilience of the waste form following disposal. Kinetic parameters were measured using a novel immersion testing method that utilise the gravimetric measurement of evolving hydrogen produced by the oxidation of the metal. This method demonstrates extremely high precision relative to a traditional volumetric approach and appears to be relatively robust in its accuracy despite its sensitivity to changing temperature. An effective activation energy of 10.2 kJmoL{sup -1} was measured for the reaction using the Arrhenius equation over a temperature range of 30-70 deg. C. This implies that the reaction remains controlled by the diffusion of reactants to the metal surface and fails to corroborate the effect previously observed by Casey and Bergeron. This may be explained by differences in initial conditions, or it could be that the system transitions into the previously observed state as it reaches equilibrium, a possibility that was not accounted for in this study as the experiments focussed on measuring the initial rate of reaction. Repeat testing and further study is warranted given that enhanced corrosion could offer a means to produce a self-immobilising waste form with minimal intrusion, offering both improved safety tolerances and cost savings for the decommissioning and waste disposal efforts ongoing at the Sellafield site. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization and formability of continuous-cast AZ31B magnesium alloy sheets

The goal of this work is to understand the inter-relationship between the initial properties of continuous-cast magnesium alloy (AZ31B) sheets and their subsequent formability and post-formed mechanical performance for use in cost-effective, lightweight, automotive body panels. As-received sheets, provided by the Automotive Metals Division (AMD-602) team, were characterized by surface roughness measurements using mechanical profilometry. The arithmetic mean deviation of profile (Ra) and the maximum two-point height of profile (Ry) of the as-received sheets ranged from ~0.2-2 μm and ~2-15 μm, respectively. Several commercial lubricants were evaluated by thermal analysis and the liquid phase of the lubricants was found to evaporate/decompose upon heating leaving behind a solid residue upon heating to temperatures exceeding ~125-150°C. Elevated temperature bending-under-tension (BUT) friction tests were conducted at 350°C and the coefficient-of-friction values ranged from a minimum of ~0.1 (for tungsten disulfide lubricant) to ~0.7 when no lubricant was used. These results, in conjunction with those from the forming trials conducted by the AMD-602 team, will be eventually used to determine the role of sheet-die friction in determining the formability of AZ31B sheets.

36 MATERIALS SCIENCE↗

SOLID-STATE SYNTHESIS AND SOME PROPERTIES OF MAGNESIUM-DOPED COPPER ALUMINUM OXIDES

Copper aluminum oxide (CuAlO2) with delafossite structure is a promising candidate for high temperature thermoelectric applications because of its modest band gap, high stability and low cost. We investigate magnesium doping on the aluminum site as a means of producing higher electrical conductivity and optimized Seebeck coefficient. Powder samples were synthesized using solid-state reaction and bulk samples were prepared using both cold-pressing and hot-pressing techniques. Composition analysis, microstructural examination and transport property measurements were performed, and the results suggest that while hot-pressing can achieve high density samples, secondary phases tend to form and lower the performance of the materials.

36 MATERIALS SCIENCE↗