Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Procedure for locating 10 km UTM grid on Alabama County general highway maps

Each county highway map has a geographic grid of degrees and tens of minutes in both longitude and latitude in the margins and within the map as intersection crosses. These will be used to locate the universal transverse mercator (UTM) grid at 10 km intervals. Since the maps used may have stretched or shrunk in height and/or width, interpolation should be done between the 10 min intersections when possible. A table of UTM coordinates of 10 min intersections is required and included. In Alabama, all eastings are referred to a false easting of 500,000 m at 87 deg W longitude (central meridian, CM).

Paludan, C. T. N.↗
NASA NTRS1975

Jet noise source location by cross-correlation of far field microphone signals

A theoretical analysis is presented for the evaluation of correlation functions of many spatially separated noise sources in a jet. A one-dimensional model is considered in which the noise sources are located on the axis of the jet downstream of the nozzle. The theory for extracting the spatial distribution from far field cross-correlations by signal analysis is derived. The advantage of this method is that difficult numerical inversions are not needed.

Parthasarathy, S. P.↗
NASA NTRS1975

A half plane and a strip with an arbitrarily located crack

The paper introduces a technique to deal with the problem of an elastic domain containing an arbitrarily oriented internal crack. The problem is formulated as a system of integral equations for a fictitious layer of body forces imbedded in the plane along a closed smooth curve encircling the original domain. The problems of a half plane with a crack in the neighborhood of its free boundary and of an infinite strip containing a symmetrically located internal crack with an arbitrary orientation are considered as examples. In each case the stress intensity factors are computed and are given as functions of the crack angle.

Erdogan, F.↗
NASA NTRS1975

The location of the site of energy release in a solar X-ray subflare

A rapid sequence of high-resolution X-ray photographs was obtained by the S-054 X-ray Telescope Experiment on Skylab on 1973 September 1. During the course of this observation, photographs were obtained of a flarelike brightening in a simple, bipolar active region. Analysis reveals the following facts. The event had the form of a small, elongated bright feature whose narrowest dimension was less than seconds of arc. The brightness peak of the flarelike brightening was located within seconds of arc of the center of brightness of a preexisting loop structure that crossed the magnetic neutral line. This loop was observed to brighten gradually beginning approximately 10 minutes prior to the flarelike event. During the rise of the event, the 2-17 A X-ray brightness of the center of the subflare core rose by over a factor of 10 in a time period of 196 seconds or less.

Petrasso, R. D.↗
NASA NTRS1976

Effects of nozzle exit location and shape propulsion-induced aerodynamic characteristics due to vectoring twin nozzles at Mach numbers from 0.40 to 1.2

An investigation was conducted in the Langley 16-foot transonic tunnel to determine the induced lift characteristics of a vectored-thrust concept in which jet-exhaust nozzles were located in the fuselage at or near the wing trailing edge. The effects of moving twin rectangular nozzles rearward from the wing trailing edge and of round nozzles at the trailing edge only were studied at Mach numbers from 0.4 to 1.2, angles of attack up to 14 deg, and thrust coefficients up to 0.35. Nozzle deflection angle varied from 0 deg to 45 deg. Separate force balances were used to determine both total aerodynamic and thrust forces and thrust forces alone which allowed for a direct measurement of jet turning angle at forward speeds. The Reynolds number per meter varied from 8.20 x 1 million to 13.12 x 1 million.

Capone, F. J.↗
NASA NTRS1976

Application of automatic vehicle location in law enforcement: An introductory planning guide

A set of planning guidelines for the application of automatic vehicle location (AVL) to law enforcement is presented. Some essential characteristics and applications of AVL are outlined; systems in the operational or planning phases are discussed. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. A detailed description of a typical law enforcement AVL system, and a list of vendor sources are given in appendixes.

Hansen, G. R.↗
NASA NTRS1976

Stability and control characteristics of an air-breathing missile configuration having a forward located inlet

An investigation was made to determine the aerodynamic characteristics of an airbreathing missile configuration having a forward located inlet. Control was provided by cruciform tail surfaces. Aerodynamic data were obtained for the body-tail configuration alone and with planar or cruciform wings. At Mach numbers from 2.86 to 4.63, the model had internal flow. At Mach numbers from 1.70 to 2.86, the internal duct was closed, and an inlet fairing was installed to simulate boost conditions.

Sawyer, W. C.↗
NASA NTRS1976

Results of an investigation to determine local flow characteristics at the air data probe locations using an 0.030-scale model (45-0) of the space shuttle vehicle orbiter configuration 140A/B (modified) in the NASA Ames Research Center unitary plan wind tunnel (OA161, A, B, C), volume 1

Results are presented of wind tunnel test 0A161 of a 0.030-scale model 45-0 of the configuration 140A/B (modified) space shuttle vehicle orbiter in the NASA Ames Research Center Unitary Plan Wind Tunnel facilities. The purpose of this test was to determine local total and static pressure environments for the air data probe locations and relative effectiveness of alternate flight-test probe configurations. Testing was done in the Mach number range from 0.30 to 3.5. Angle of attack was varied from -8 to 25 degrees while sideslip varied between -8 and 8 degrees.

Nichols, M. E.↗
NASA NTRS1976

Static and wind tunnel near-field/far-field jet noise measurements from model scale single-flow baseline and suppressor nozzles. Volume 1: Noise source locations and extrapolation of static free-field jet noise data

A test was conducted in the Boeing Large Anechoic Chamber to determine static jet noise source locations of six baseline and suppressor nozzle models, and establish a technique for extrapolating near field data into the far field. The test covered nozzle pressure ratios from 1.44 to 2.25 and jet velocities from 412 to 594 m/s at a total temperature of 844 K.

Jaeck, C. L.↗
NASA NTRS1976

Use of satellites to determine optimum locations for solar power stations

Ground measurements of solar radiation are too sparse to determine important mesoscale differences that can be of major significance in solar power station locations. Cloud images in the visual spectrum from the SMS/GOES geostationary satellites are used to determine the hourly distribution of sunshine on a mesoscale in the continental United States excluding Alaska. Cloud coverage and density as a function of time of day and season are considered through the use of digital data processing techniques. Low density cirrus clouds are less detrimental to solar energy collection than other types; and clouds in the morning and evening are less detrimental than those during midday hours of maximum insolation. The seasonal geographic distributions of sunshine are converted to Langleys of solar radiation received at the earth's surface through the use of transform equations developed from long-term measurements of these two parameters at 18 widely distributed stations. The high correlation between measurements of sunshine and radiation makes this possible. The output product will be maps showing the geographic distribution of total solar radiation on the mesoscale which is received at the earth's surface during each season.

Hiser, H. W.↗
NASA NTRS1976

Location of the source of magnetospheric energetic particle bursts by multispacecraft observations

During a magnetic substorm on Oct. 16, 1973 a number of magnetospheric bursts of energetic particles were observed simultaneously by IMP-6 and IMP-7 in the magnetotail. Detailed anisotropy measurements of 210 and 290 keV protons provide for the first time an indication of the location of the source of the energetic magnetospheric particles as well as evidence for its movement with speeds from 30 to more than 80 km/sec, in association with the intensification of the westward auroral electrojet during a magnetic bay at the station closest to the local time of the spacecraft (also local midnight). The observations indicate that energetic particles are accelerated to greater than 1.85 MeV in a moving and localized region in the geomagnetotail.

Sarris, E. T.↗
NASA NTRS1978

Ablative liner locates hotspots

Ablative liner quantifies local-heating effects in combustion chambers and other applications. By identifying hotspots and helping to map heat-flux patterns, liner is useful tool for research in engine design. Liner permanently records heat flux at each point by depth of ablation due to local heating. Technique determines best locations for thermocouples for more extensive testing.

Mercer, S. D.↗
NASA NTRS1977

Method of locating persons in distress

A method for locating any person in distress in a selected area on the surface of the earth who has deployed passive radio frequency (RF) reflectors in a predetermined arrangement is analyzed. A first transparency is made in the spatial frequency domain of an image of said predetermined arrangement of said RF reflectors. The said selected area of the surface of the earth is scanned by means of a side-looking radar, on board a satellite or aircraft, to produce radar images. Second transparencies in the conventional image domain are produced from the radar images. It is then determined from the first and second transparencies, by means of complex spatial filtering.

Sivertson, W. E., Jr.↗
NASA NTRS1976

Satellites for distress alerting and locating: Report by Interagency Committee for Search and Rescue Ad Hoc Working Group

The background behind the congressional legislation that led to the requirement for the Emergency Locator Transmitter (ELT) and the Emergency Position-Indicating Radio Beacon (EPIRB) to be installed on certain types of aircraft and inspected marine vessels respectively is discussed. The DAL problem is discussed for existing ELT and EPIRB equipped aircraft and ships. It is recognized that the DAL requirement for CONUS and Alaska and the maritime regions are not identical. In order to address the serious DAL problem which currently exists in CONUS and Alaska, a low orbiting satellite system evolves as the most viable and cost effective alternative that satisfies the overall SAR system design requirements. A satellite system designed to meet the needs of the maritime regions could be either low orbiting or geostationary. The conclusions drawn from this report support the recommendation to proceed with the implementation of a SAR orbiting satellite system.

Ehrlich, E.↗
NASA NTRS1977

Distress detection, location, and communications using advanced space technology

This paper briefly introduces a concept for low-cost, global, day-night, all-weather disaster warning and assistance. Evolving, advanced space technology with passive radio frequency reflectors in conjunction with an imaging synthetic aperture radar is employed to detect, identify, locate, and provide passive communication with earth users in distress. This concept evolved from a broad NASA research on new global search and rescue techniques. Appropriate airborne radar test results from this research are reviewed and related to potential disaster applications. The analysis indicates the approach has promise for disaster communications relative to floods, droughts, earthquakes, volcanic eruptions, and severe storms.

Sivertson, W. E., Jr.↗
NASA NTRS1977

Effects of canard location on the aerodynamic characteristics of a sharp-nosed missile at Mach numbers of 1.5 and 2.0

A sharp-nosed missile model with nose-mounted canards and cruciform tail surfaces was tested in the Ames 6- by 6-foot wind tunnel to determine the contributions of the component aerodynamic surfaces on the static aerodynamic characteristics at Mach numbers of 1.5 and 2.0 and a Reynolds number of 1,000,000 based on body diameter. Effect of canard location (at three different axial positions) was investigaed. Data were obtained at angles of attack ranging from 3 deg to 12 deg, roll angles of 0 deg and 45 deg, and canard-deflection angles from 3 deg to 15 deg for various stages of model build-up (i.e., with and without canard and/or tail surfaces). The canard in the most aft position was least effective in trimming the model. With movement of the canard to the most forward position, the model was trimmable at angles of attack up to about 5 deg or 6 deg with panel deflections of 9 deg.

Kassner, D. L.↗
NASA NTRS1977

The use of LANDSAT imagery to locate uncharted coastal features on the Labrador coast

A survey of several offshore islands, rocks and shoals on the Labrador Coast was performed, using LANDSAT imagery to assist in the location of uncharted hydrographic features. Several satellite coverages of the coast were studied prior to the survey, and suspected shoal points identified. Using map-derived control points and monocomparator measurements of the LANDSAT images, the positions of these points were determined by mathematical adjustment to an estimated position accuracy of 150 meters. As a result, on the survey, an uncharted island and eight uncharted drying rocks, which might easily have escaped detection from a survey ship, were verified and positioned. To check the accuracy of the coordinates derived from LANDSAT, three islands were positioned by standard ground survey methods. The positional differences, all less than 150 meters, are not plottable at the scale of the existing offshore charts. The LANDSAT positions were also used to control aerial photography of a shoal area for office compilation of a hydrographic chart.

Fleming, E. A.↗
NASA NTRS1977

Design and demonstration of an advanced data collection/position location system

The final report on a breadboard evaluation and demonstration program is reported concerning the applicability of MSK modulation and chirp-z transformer technology in Advanced Data Collection/Position Location (ADC/PL) systems. The program effort consisted of three phases - design, testing, and evaluation. Section 2 describes the breadboard hardware built during the design phase of the program, Section 3 describes the tests conducted on the breadboard and the results of the tests, and Section 4 presents a brief analysis and summary of the findings of the breadboard tests and develops a sample ADC/PL system which incorporates both MSK modulation and a chirp-z transformer.

Source record↗