Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Li”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Unlocking Failure Mechanisms and Improvement of Practical Li-S Pouch Cells Through in Operando Pressure Study

For Lithium-sulfur (Li-S) battery commercialization, the study at a pouch cell level is essential, as some problems ignored or deemed minimal at the smaller level could have a greater effect on the performance of the larger pouch cell. Herein, the failure mechanisms of Li-S pouch cells are deeply investigated via in operando pressure analysis. It is found that highly porous structures of cathodes/separators and slow electrolyte diffusion through cathodes/separators can both lead to poor initial wetting. Additionally, Li-metal anode dominates the thickness variation of the whole pouch cell, which is verified by in situ measured pressure variation. Consequently, a real-time approach that combined normalized pressure with dP/dV analysis is proposed and validated to diagnose the morphology evolution of Li-metal anode. Moreover, applied pressure and porosity/tortuosity ratio of the cathode are both identified as independent factors that influence anode performance. In addition to stabilizing anodes, high pressure is proven to improve the cathode connectivity and avoid cathode cracking over cycling, which improves the possibility of developing cathodes with high sulfur mass loading. This work provides insights into Li-S pouch cell design (e.g., cathode and separator) and highlights pathways to improve cell capacity and cycling performance with applied and monitored pressure

25 ENERGY STORAGE↗
DOE OSTI2020

Materials Data on Li by Materials Project

Li is Magnesium structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Li is bonded to twelve equivalent Li atoms to form a mixture of corner, edge, and face-sharing LiLi12 cuboctahedra. There are six shorter (3.04 Å) and six longer (3.08 Å) Li–Li bond lengths.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Li by Materials Project

Li is Tungsten structured and crystallizes in the cubic Im-3m space group. The structure is three-dimensional. Li is bonded in a body-centered cubic geometry to eight equivalent Li atoms. All Li–Li bond lengths are 2.97 Å.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Li by Materials Project

Li is Copper structured and crystallizes in the trigonal R-3m space group. The structure is three-dimensional. Li is bonded to twelve equivalent Li atoms to form a mixture of corner, edge, and face-sharing LiLi12 cuboctahedra. There are six shorter (3.05 Å) and six longer (3.06 Å) Li–Li bond lengths.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on Li by Materials Project

Li is Tungsten structured and crystallizes in the cubic I-43d space group. The structure is three-dimensional. Li is bonded in a body-centered cubic geometry to eight equivalent Li atoms. All Li–Li bond lengths are 2.97 Å.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Elucidation of Electrolyte Decomposition Pathways in Li--O2 Batteries using Ab Initio Computations

Li-O2 batteries offer exciting possibilities for energy-storage applications requiring higher energy content than current Li-ion battery technologies. However, development of commercial Li-O2 batteries faces many challenges including electrolyte decomposition in order to realize the full potential of this emerging technology. In this work, we present ab initio calculations that probe the role of reactive oxygen species including singlet oxygen, superoxide, and peroxides on electrolyte decomposition for potential organic electrolytes for use in Li-O2 batteries. We investigate the influence that the harsh electrochemical environment near the cathode plays in promoting electrolyte decomposition by using increasingly detailed computational models. Our results highlight existing problems with organic electrolytes for Li-O2 battery development and suggest potential design strategies for reducing electrolyte decomposition.

Li-O2 Batteries↗
DOE OSTI2023

Correlating Rate-Dependent Transition Metal Dissolution between Structure Degradation in Li-Rich Layered Oxides

Understanding the mechanism of the rate-dependent electrochemical performance degradation in cathodes is crucial to developing fast charging/discharging cathodes for Li-ion batteries. Here, in this work, taking Li-rich layered oxide Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 as the model cathode, the mechanisms of performance degradation at low and high rates are comparatively investigated from two aspects, the transition metal (TM) dissolution and the structure change. Quantitative analyses combining spatial-resolved synchrotron X-ray fluorescence (XRF) imaging, synchrotron X–ray diffraction (XRD) and transmission electron microscopy (TEM) techniques reveal that low-rate cycling leads to gradient TM dissolution and severe bulk structure degradation within the individual secondary particles, and especially the latter causes lots of microcracks within secondary particles, and becomes the main reason for the fast capacity and voltage decay. In contrast, high-rate cycling leads to more TM dissolution than low-rate cycling, which concentrates at the particle surface and directly induces the more severe surface structure degradation to the electrochemically inactive rock-salt phase, eventually causing a faster capacity and voltage decay than low-rate cycling. These findings highlight the protection of the surface structure for developing fast charging/discharging cathodes for Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

Extreme fast charging (XFC, =15 min charging time) of Li-ion batteries (LIBs) has been proposed as an immediate target to increase the commercial appeal of electric vehicles. However, XFC of LIBs is associated with the degradation of battery performance and safety concerns. Quantitative and simultaneous characterization of various components during cell degradation represents a major experimental challenge. In this work, we outline a methodology for the use of spatially resolved, high-energy X-ray diffraction as a quantitative, in situ method of mapping the degradation of LIBs. We use this approach to study the battery cell capacity loss, both locally (mm scale) and globally over the entire cell (cm scale). Specifically, our workflow allows us to quantify the total amount of plated Li on the anode, as well as its spatial correlation to the structural properties of the anode and cathode. The method complements existing optical methods to resolve the spatial heterogeneity of local degradation mechanisms such as Li plating and provides simultaneous insights into concomitant anode state-of-charge variability. We apply it to commercially relevant single-layer pouch cells with the graphite anode and the LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode. Our results show that Li plating occurs heterogeneously on the graphite anode and that it is spatially correlated to the extent of anode lithiation. In this work, we anticipate that the described workflow will allow for understanding multiscale degradation in energy-storage devices beyond LIBs, where quantitative analysis at a local and global length scale can be performed without the necessity to tear down the device, due to the applicability of high-energy X-rays to probe in situ degradation.

25 ENERGY STORAGE↗
DOE OSTI2022

Suppressing electrolyte-lithium metal reactivity via Li + -desolvation in uniform nano-porous separator

Lithium reactivity with electrolytes leads to their continuous consumption and dendrite growth, which constitute major obstacles to harnessing the tremendous energy of lithium-metal anode in a reversible manner. Considerable attention has been focused on inhibiting dendrite via interface and electrolyte engineering, while admitting electrolyte-lithium metal reactivity as a thermodynamic inevitability. Here, we report the effective suppression of such reactivity through a nano-porous separator. Calculation assisted by diversified characterizations reveals that the separator partially desolvates Li + in confinement created by its uniform nanopores, and deactivates solvents for electrochemical reduction before Li 0 -deposition occurs. The consequence of such deactivation is realizing dendrite-free lithium-metal electrode, which even retaining its metallic lustre after long-term cycling in both Li-symmetric cell and high-voltage Li-metal battery with LiNi 0.6 Mn 0.2 Co 0.2 O 2 as cathode. The discovery that a nano-structured separator alters both bulk and interfacial behaviors of electrolytes points us toward a new direction to harness lithium-metal as the most promising anode.

25 ENERGY STORAGE↗
DOE OSTI2024

Self-terminating, heterogeneous solid–electrolyte interphase enables reversible Li–ether cointercalation in graphite anodes

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li–solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF 4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte shows self-terminated reactivity on graphite edge planes and results in a grainy, fluorinated pseudo-SEI. The molecular origin of the pseudo-SEI is elucidated by ab initio molecular dynamics (AIMD) simulations. The operando synchrotron analyses further demonstrate the reversible and monotonous phase transformation of cointercalated graphite. Our findings demonstrate the feasibility of Li cointercalation chemistry in graphite for extreme-condition batteries. The work also paves the foundation for understanding and modulating the interphase generated by ether electrolytes in a broad range of electrodes and batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Uncovering the Network Modifier for Highly Disordered Amorphous Li‐Garnet Glass‐Ceramics

Abstract Highly disordered amorphous Li 7 La 3 Zr 2 O 12 (aLLZO) is a promising class of electrolyte separators and protective layers for hybrid or all‐solid‐state batteries due to its grain‐boundary‐free nature and wide electrochemical stability window. Unlike low‐entropy ionic glasses such as Li x PO y N z (LiPON), these medium‐entropy non‐Zachariasen aLLZO phases offer a higher number of stable structure arrangements over a wide range of tunable synthesis temperatures, providing the potential to tune the LBU‐Li + transport relation. It is revealed that lanthanum is the active “network modifier” for this new class of highly disordered Li + conductors, whereas zirconium and lithium serve as “network formers”. Specifically, within the solubility limit of La in aLLZO, increasing the La concentration can result in longer bond distances between the first nearest neighbors of Zr─O and La─O within the same local building unit (LBU) and the second nearest neighbors of Zr─La across two adjacent network‐former and network‐modifier LBUs, suggesting a more disordered medium‐ and long‐range order structure in LLZO. These findings open new avenues for future designs of amorphous Li + electrolytes and the selection of network‐modifier dopants. Moreover, the wide yet relatively low synthesis temperatures of these glass‐ceramics make them attractive candidates for low‐cost and more sustainable hybrid‐ or all‐solid‐state batteries for energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interfacial Issues and Modification of Solid Electrolyte Interphase for Li Metal Anode in Liquid and Solid Electrolytes

Abstract The high energy density required for the next generation of lithium batteries will likely be enabled by a shift toward lithium metal anode from the conventional intercalation‐based anode such as graphite. However, several critical challenges for Li metal originate from its highly reactive nature and the hostless reaction of deposition and stripping impede the practical use of Li metal as an anode. The role of the solid electrolyte interphase (SEI) is very important for the Li metal anode where the SEI must protect the dynamically changing surface of the Li metal. Since the SEI‐generating reaction mechanisms for the two different electrolyte systems, liquid and solid, are considerably different, the SEI layers formed between the Li metal and the electrolytes in the two electrolyte systems have substantially different properties, causing different interfacial issues. Inhibition of the interfacial problems requires different strategies to reinforce the SEI layer for each of the electrolyte systems. However, the differences in the two electrolyte systems have not been clearly compared in the prior literature. In this report, the interfacial issues for the two different electrolyte systems are compared and different strategies for SEI modification are provided to overcome the issues.

25 ENERGY STORAGE↗
DOE OSTI2020

Beyond the Polysulfide Shuttle and Lithium Dendrite Formation: Addressing the Sluggish Sulfur Redox Kinetics for Practical High‐Energy Li‐S Batteries

Abstract Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium–sulfur (Li‐S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li‐S pouch cells. Herein, we demonstrate that a rational combination of selenium doping, core–shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm −2 ) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm −2 ) with a low electrolyte/sulfur ratio (10 μL mg −1 ). This research further demonstrates a durable Li‐Se/S pouch cell with high specific capacity, validating the potential practical applications.

Zhao, Chen↗
DOE OSTI2020

Beyond the Polysulfide Shuttle and Lithium Dendrite Formation: Addressing the Sluggish Sulfur Redox Kinetics for Practical High-Energy Li-S Batteries

Electrolyte modulation simultaneously suppresses polysulfide the shuttle effect and lithium dendrite formation of lithium-sulfur (Li-S) batteries. However, the sluggish S redox kinetics, especially under high S loading and lean electrolyte operation, has been ignored, which dramatically limits the cycle life and energy density of practical Li-S pouch cells. In this work, we demonstrate that a rational combination of selenium doping, core-shell hollow host structure, and fluorinated ether electrolytes enables ultrastable Li stripping/plating and essentially no polysulfide shuttle as well as fast redox kinetics. Thus, high areal capacity (>4 mAh cm -2 ) with excellent cycle stability and Coulombic efficiency were both demonstrated in Li metal anode and thick S cathode (4.5 mg cm -2 ) with a low electrolyte/sulfur ratio (10 mu L mg(-1)). Overall, this research further demonstrates a durable Li-Se/S pouch cell with high specific capacity, validating the potential practical applications.

25 ENERGY STORAGE↗
DOE OSTI2026

Modulating Li + and Polysulfide Solvation with Low-Density Moderately Solvating Electrolytes for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries show great promise as the next-generation rechargeable batteries, yet they still suffer from polysulfide shuttling and interphasial instability. Electrolyte, as the medium for ion transport and sulfur conversion, plays a crucial role in overcoming these challenges. Here, we introduce a moderately solvating electrolyte (MSE) based on low-density, low-viscosity, and nonfluorinated ether co-solvents that balances polysulfide suppression, Li metal stabilization, and redox kinetics. Through multiple solvent–solvent and solvent-ion interactions, the optimized MSE weakens Li + -solvent pairing while strengthening cation–anion interactions, thereby lowering the desolvation barrier and promoting the formation of a favorable solid–electrolyte interphase (SEI). Meanwhile, MSE limits the polysulfide dissolution but improves the accessibility of active material through better wettability and tailored solvation environment, leading to an altered sulfur deposition mechanism with β – α conversion. This approach enables a stable cycling of high-mass loading Li–S cells (> 3.5 mg cm -2 ) at both room temperature and 45 °C (where shuttling and side reactions are severer), and demonstrates a pouch cell with lean electrolyte content (4.5 µL mg s -1 ). This work highlights a practical route to develop high-performance electrolyte for Li–S cells and provides mechanistic insights into their operation.

25 ENERGY STORAGE↗
DOE OSTI2025

Stability and Performance of 3d Transition Metal Carbo‐Sulfides: A Density Functional Theory Exploration for Li‐Ion Battery Anodes

As the demand for high-performance and reliable energy storage devices continues to rise, identifying new anode materials is crucial for advancing Li-ion battery (LIB) technology. Inspired by recent experimental breakthroughs in synthesizing two-dimensional transition metal carbo-chalcogenides (2D-TMCCs), density functional theory calculations are performed to systematically explore their sulfide variants (TM 2 S 2 C) spanning all 3d transition metals in three possible phases. Through comprehensive evaluations of thermodynamic, dynamic, mechanical, and thermal stabilities, seven stable 2D-TMCC candidates are identified, four of which exhibit superior battery performance. Notably, V-based 2D-TMCCs across all three phases deliver moderate open-circuit voltages (OCV), efficient Li diffusion, and substantial capacities, making them promising candidates for industrial applications without requiring specific phase controls. A Cr-based 2D-TMCC (with sulfur atoms above carbon atoms) offers the highest capacity of 515.40 mAh g −1 , the lowest Li diffusion barrier, and an optimal OCV, highlighting its appealing potential as an anode material for LIBs. Furthermore, significant Li–Li spacing and pronounced electron delocalization in these four 2D-TMCCs suggest a reduced risk of dendrite formation. This work expands the 2D-TMCC family and identifies up-and-coming candidates for next-generation LIB anodes.

anode materials↗
DOE OSTI2024

Sources of Li isotope bias during SIMS analysis of standard glasses

The 7 Li/ 6 Li ratios in fourteen USGS, MPI-DING, and NIST glass reference materials (RMs) were analyzed by LG-SIMS to assess compositional matrix effects, evaluate RM δ 7 Li homogeneity, and calculate the useful yield of lithium in silicate glasses. The analyzed RMs cover a range of SiO 2 contents from 45.5 to 75.6% (komatiite to rhyolite), the largest compositional range yet evaluated for δ 7 Li matrix effects. We observe a matrix-induced bias (matrix effect) of up to 18‰ over the studied range that linearly correlates with SiO 2 content, demonstrating that SiO 2 content is a critical factor that must be considered when using silicate glasses to standardize for silicate samples of unknown δ 7 Li composition. All RMs were found to be sufficiently reproducible to aid in standardization of variable SiO 2 contents and appear isotopically homogeneous at the precision of our measurements. Lithium ionizes very efficiently in these RMs, with measurable yields >5% in all fused-rock RMs and >15% in low SiO 2 fused-rock RMs measured at high beam intensities. Finally, fused-rock RMs ionize lithium 2-3x more efficiently than synthetic glass RMs, which may be related to differences in major oxide chemistry and the reduced nature of the synthetic glasses relative to their fused counterparts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Liquid lithium wetting and percolation in a porous tungsten/liquid Li plasma facing component (PFC)

This work explores the concept of a hybrid material system designed to protect the plasma from high-Z material emission while also protecting an underlying high-Z wall material from erosion by integrating a low-Z component in the liquid phase. Plasma-surface interaction properties of a porous tungsten (W)-liquid metal hybrid system, having the favorable bulk thermomechanical properties of W while serving as a scaffold for a liquid metal with self-healing and radiative vapor shielding characteristics, are examined. W-substrates with 70% density of bulk W and 1–5 μm sized pores have been fabricated with 50-nm W powders using spark plasma sintering. Enhanced lithium (Li) wettability, driven by percolation through the porous W architecture, is demonstrated with in-situ liquid Li drop measurements. Finally, results show complete wetting of liquid Li at 250 °C in the porous W, 100 °C lower temperature than what has been observed on traditional W surfaces. In operando ion beam analysis of Li films deposited on porous W substrates provides microscopic evidence of Li percolation into the substrate and a first look at D retention up to a depth of 100 nm after plasma exposure at a flux of 10 20 m –2 s –1 , 250 eV/amu D + plasma to a fluence of 1.16 × 10 23 m –2 at a temperature of 200 °C.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗