Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

XES studies of density of states of high temperature superconductors

X-ray emission spectroscopic studies concerning the superconducting crystals, thin films, and ceramics of the Y-Ba-Cu-O, Tm-Ba-Cu-O, Bi-Sr-Ca-Cu-O, Bi-Pb-Sr-Ca-Cu-O, and Tl-Ba-Ca-Cu-O types are presented. The contributions of the 13d(9)L, 13d(10)L, 13d(10)LL, and 13d(10)L(2) configurations, where L denotes a ligand hole at the oxygen orbitals in the spectroscopic pattern of these superconductors are discussed. An attempt to connect the x-ray 'as registered' Cu L(alpha) emission spectra with the density of states close to the Fermi level, considering an influence of the CuL3 absorption edge, is presented. The corrected intensity distributions below the Fermi level are found to correspond to the theoretical density of states. Furthermore, an approach to the average valence of copper basing on the account of the self-absorption and fluorescence effects and on the configurations listed above is shown. The average valence of copper in the materials investigated is estimated to lie in the range of +2.10 to 2.32 when the formal trivalent copper is considered as that characterized by the 13d(9)L configuration. The density of states at the Fermi level was estimated to be 2.4 states/eV-cell for a Bi-Sr-Ca-Cu-O crystal and 3.6 states/eV-cell for a Tl-Ba-Ca-CU-O ceramic.

Jasiolek, Gabriel↗
NASA NTRS2018

Conductivity of a Copper-Carbon Covetic Composite

NASA is currently engaged in the development of highly electrically conductive wire for space and aviation power and propulsion applications. Higher levels of electrical conductivity and lower densities compared to copper and aluminum are needed to improve the efficiency of commercial aviation and space flight. Carbon, in various forms, is being considered as a component in composites to increase conductivity and decrease density in Cu and Al. One form of carbon that is currently receiving much interest is known as covectic. The technology currently known as covetics was first introduced by Shugart and Scherer whose patents claimed "Carbon can be incorporated into any of these metals by melting the metal, mixing the carbon into the molten metal and, while mixing, applying a current of sufficient amperage to the molten mixture such that the carbon becomes incorporated into the metal, thereby forming a single phase metal-carbon material." It is reported that in this process a conversion reaction occurs with the carbon forming covalent bonds with the host metal, and that covetic processing enables higher carbon solubility and improvements in properties. Although there is a growing body of work supporting covetic materials, it is still a very new and somewhat controversial field. Composition, density, and electrical conductivity measurements of a covetically processed alloy ingot of Cu and C, with a nominal composition of Cu-0.4wt.% C, were made. A pure Cu ingot was similarly processed for comparison. Sections of these ingots were worked into wire and tested. Only small amounts of C could be detected in the Cu-0.4wt.% C ingot, and trace amounts (0.006 wt.%) in the wire. All wires had densities very close to the full density of pure Cu, indicating a high level of Cu purity and low void fraction. Finally, the electrical conductivity of the Cu-0.4wt.% C wires were 9% lower than the samples similarly processed but without C additions. The wires made without C additions had conductivities approximately equal to pure Cu. The low conductivity of the Cu-0.4wt.% C material is believed to be due to: (1) a structure of interfaces in the wire created by collapsed voids lined with elemental C, (2) impurities, such as Fe in the Cu, which came from the added C, and (3) a small volume fraction of voids.

Degroh, Henry C.↗
NASA NTRS1978

Scaling relationships for mercury and gaseous propellant ion thrusters

A model describing the doubly charged ion densities in argon and xenon ion thrusters is presented. Doubly charged ions are shown to be produced in significant numbers from both the neutral and singly ionized states. Doubly-to-singly charged ion density ratios calculated using this model are compared to experimental values of this ratio measured in the 15 cm multipole thruster using both propellants. Agreement between theory and experiment is shown to be good. Using this doubly charged ion model, and a similar one obtained previously for mercury, together with the constant neutral loss rate theory, Child's current density law and accelerator grid fabrication limitations, a set of scaling relationships are developed. These relationships show the propellant utilizations, thrust densities and discharge power levels that can be expected as thruster diameter and/or specific impulse are increased and doubly charged ion densities are held at acceptably low values.

Wilbur, P. J.↗
DOE OSTI2022

Near-Quantitative Predictions of the First-Shell Coordination Structure of Hydrated First-Row Transition Metal Ions Using K-Edge X-ray Absorption Near-Edge Spectroscopy

Understanding the solvation structure of transition metal ions is important due to its broad impact on the kinetics, stability, and reactivity in a variety of applications in geochemistry, biochemistry, energy storage, and environmental chemistry. Using water as the common ligand, we study the X-ray absorption pre-edge and near-edge spectra at the K-edge of a near-complete series of hydrated first-row transition metal ions with d-orbital occupancy ranging from d 2 to d 10 . Starting with optimized structures that were derived from an explicit solvation treatment at the density functional theory (DFT) level, we then compute the pre-edge X-ray absorption spectra at the metal ion K-edge at the time dependent density functional theory (TDDFT) and restricted active-space second-order perturbation theory (RASPT2) levels of theory. TDDFT calculations provide accurate results for spectra that are dominated by single excitations, while significant improvements were obtained with RASPT2 calculations that correctly distinguish between singly and doubly excited states, where relevant, with quantitative accuracy compared with experiment. We analyze and assign the dierent pre-edge features for each metal ion in order to reveal the impact of the variations in the d orbital occupancy on the rst-shell coordination environment. For completeness, we also report the lowest energy ligand-field d-d transitions for all the transition metal aqua ions considered in this study using complete active space second order perturbation theory (CASPT2).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Performance of a local electron density trigger to select extensive air showers at sea level

Time coincident voltage pulses in the two closely space (1.6m) plastic scintillators were recorded. Most of the recorded events are expeted to be due to electrons in cosmic ray showers whose core fall at some distance from the detectors. This result is confirmed from a measurement of the frequency distribution of the recorded density ratios of the two scintillators.

Abbas, T.↗
DOE OSTI2022

A fully Lagrangian, non-parametric bias model for dark matter halos

Here, we present a non-parametric Lagrangian biasing model and fit the ratio of the halo and mass densities at the field level using the mass-weighted halo field in the AbacusSummit simulations at z=0.5. Unlike the perturbative halo bias model that has been widely used in interpreting the observed large-scale structure traced by galaxies, we find a non-negative halo-to-mass ratio that increases monotonically with the linear overdensity δ 1 in the initial Lagrangian space. The bias expansion, however, does not guarantee non-negativity of the halo counts, and may lead to rising halo number counts at negative overdensities. The shape of the halo-to-mass ratio is unlikely to be described by a polynomial function of δ 1 and other quantities. Especially for massive halos with 6×10 12 h -1 M ⊙ , the halo-to-mass ratio starts soaring up at δ 1 >0, substantially different from the predictions of the bias expansion. We show that for the halo masses we consider (M>3×10 11 h -1 M ⊙ ) a non-parametric halo-to-mass ratio as a function of δ 1 and its local derivative ∇^2δ 1 can recover the halo power spectra to sub-percent level accuracy for wavenumbers k=0.01-0.1 h Mpc -1 given a proper smoothing scale to filter the initial density field, even though we do not fit the power spectrum directly. However, there is mild dependence of the recovery of the halo power spectrum on the smoothing scale and other input parameters. At k<0.01 h Mpc -1 and for massive halos with M>6x10 12 h -1 M ⊙ , our non-parametric model leads to a few percent overestimation of the halo power spectrum, indicating the need for larger or multiple smoothing scales. The halo-to-mass ratios obtained qualitatively agree with intuitions from extended Press-Schechter theory. We compare our framework to the bias expansion and discuss possible extensions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Universal reduced basis for the calibration of covariant energy density functionals

The reduced basis method is used to construct a “universal” basis of Dirac orbitals that may be applicable throughout the nuclear chart to calibrate covariant energy density functionals. Relative to the successful development of a reduced basis emulator for the nonrelativistic Schrödinger equation, the Dirac equation adds an extra layer of complexity due to the existence of negative energy states, which complicates building an efficient reduced basis. However, once this problem is mitigated, the resulting reduced basis is able to accurately and efficiently reproduce the high-fidelity model at a fraction of the computational cost. We are confident that the resulting reduced basis will serve as a foundational element in developing rapid and accurate emulators. In turn, these emulators will play a critical role in the Bayesian optimization of covariant energy density functionals.

Bayesian methods↗
DOE OSTI2020

Molecular Structure and Electron Affinity of Metal-Solvent Complexes: Insights from Density Functional Theory Simulations

A molecular level understanding of the structure and energetics of the monovalent and divalent metal ion complexes is of great importance for development of next-generation batteries. Here, Density Functional Theory (DFT) simulations at the ωb97xD/6-31 + G(d,p) level of theory are performed to investigate the interaction of metal ions (Li + , Na + , K + , Mg 2+ , Ca 2+ , Zn 2+ ) with 26 organic solvent molecules. The reduction energetics (electron affinity and reduction potential) and structural responses of the solvent molecules and the molecular complexes are discussed. The DFT calculations are carried out to investigate the structure, energetics and electron affinities of chelated complexes of water (H 2 O), tetrahydrofuran (THF) and di-methoxy ethane (DME) solvent molecules. Additionally, ab initio dynamic simulations (AIMD) at 298 K using atom centered density matrix propagation (ADMP) formalism are performed to understand the spontaneous structure formation upon electron attachment of the metal ion-solvent complexes. The ADMP simulations indicate the decomposition of Mg + -(DME) 3 complex via cleavage of C–O bond of one of the three DME molecules indicating irreversible decomposition of DME in the presence of the Mg + radical. We believe that the data collected as part of this investigation serves as a library of fundamental knowledge towards a deeper understanding of the electrode-electrolyte interfacial reactions.

25 ENERGY STORAGE↗
NASA NTRS1975

Effects of radiation on charge-coupled devices

The effects of 1 MeV electron irradiation upon the performance of two phase, polysilicon aluminum gate CCDs are reported. Both n- and p-surface channel and n-buried channel devices are investigated using 64- and 128-stage line arrays. Characteristics measured as a function of radiation dose include: Transfer inefficiency, threshold voltage, field effect mobility, interface state density, full well signal level and dark current. Surface channel devices are found to degrade considerably at less than 10 to the 5th power rads (Si) due to the large increase in fast interface state density caused by radiation. Buried channel devices maintain efficient operation to the highest dose levels used.

Carnes, J. E.↗
NASA NTRS1975

Study of short-haul aircraft operating economics, volume 1

A short-haul air transportation operating cost model is developed. The effect is identified of such factors as level of service provided, traffic density of the market, stage length, number of flight cycles, level of automation, as well as aircraft type and other operational factors on direct and indirect operating costs.

Source record↗
NASA NTRS1993

Quasi-linear analysis of ion Weibel instability in the earth's neutral sheet

A quasi-linear analysis of the ion Weibel instability (IWI) for waves with parallel propagation is carried out for parameters appropriate to the earth's neutral sheet during the substorm interval. For ion drift speed reaching sizable fraction of the ion thermal speed, unstable waves grow to a nonlinear regime in a time interval greater than an ion gyroperiod. The saturation level is attained with current density reduced to about 15-28 percent of its preactivity level. The unstable wave amplitude normalized to the initial ambient field is found to be in the range of 0.2-0.8. This is accompanied by ion heating along the magnetic field with the parallel temperature being enhanced by 25-90 percent. Thus, the IWI can provide nonadiabatic heating of ions in current disruptions during substorms. The associated anomalous resistivity is estimated to be about 1 x 10 exp -7 to 1 x 10 exp -6 s, which is about 11 to 12 orders of magnitude above the classical resistivity.

Lui, Anthony T. Y.↗
NASA NTRS2002

Simulation of TRMM Microwave Imager Brightness Temperature using Precipitation Radar Reflectivity for Convective and Stratiform Rain Areas over Land

Rain is highly variable in space and time. In order to measure rainfall over global land with satellites, we need observations with very high spatial resolution and frequency in time. On board the Tropical Rainfall Measuring Mission (TRMM) satellite, the Precipitation Radar (PR) and Microwave Imager (TMI) are flown together for the purpose of estimating rain rate. The basic method to estimate rain from PR has been developed over the past several decades. On the other hand, the TMI method of rain estimation is still in the state development, particularly over land. The objective of this technical memorandum is to develop a theoretical framework that helps relate the observations made by these two instruments. The principle result of this study is that in order to match the PR observations with the TMI observations in convective rain areas, a mixed layer of graupel and supercooled water drops above the freezing level is needed. On the other hand, to match these observations in the stratiform region, a layer of snowflakes with appropriate densities above the freezing level, and a melting layer below the freezing level, are needed. This understanding can lead to a robust rainfall estimation technique from the microwave radiometer observations.

Prabhakara, C.↗
DOE OSTI2022

Density fluctuations, homeostasis, and reproduction effects in bacteria

Abstract Single-cells grow by increasing their biomass and size. Here, we report that while mass and size accumulation rates of single Escherichia coli cells are exponential, their density and, thus, the levels of macromolecular crowding fluctuate during growth. As such, the average rates of mass and size accumulation of a single cell are generally not the same, but rather cells differentiate into increasing one rate with respect to the other. This differentiation yields a density homeostasis mechanism that we support mathematically. Further, we observe that density fluctuations can affect the reproduction rates of single cells, suggesting a link between the levels of macromolecular crowding with metabolism and overall population fitness. We detail our experimental approach and the “invisible” microfluidic arrays that enabled increased precision and throughput. Infections and natural communities start from a few cells, thus, emphasizing the significance of density-fluctuations when taking non-genetic variability into consideration.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1980

Atomic data for S IV and solar observations of the 3x/2/3p /2/P-3s3p/2/ /4/P multiplet

High resolution observations of intersystem lines of S IV near 1400 A are available from Skylab. These lines are potentially useful as density diagnostics for the solar atmosphere. Energy levels, transition probabilities and collision strengths have, therefore, been calculated for S IV, including the configurations 3x(2)3p, 3s3p(2), and 3s(2)3d. Line intensities and level populations have been calculated as a function of electron density. The calculated population of the 3s3p(2) (4)P(5/2) level is found to reach a pseudo-Boltzmann equilibrium at a density which is four times higher than is inferred from solar spectra and level population calculations of lighter ions such as O IV.

Bhatia, A. K.↗
NASA NTRS2024

Enhancing Consistency of Microphysical Properties of Precipitation Across the Melting Layer in the Dual-Frequency Precipitation Radar Data

Stratiform rain and the overlying ice play crucial roles in Earth's climate system. From a microphysics standpoint, water mass flux primarily depends on two variables: particles' concentration and their mass. The Dual-frequency Precipitation Radar (DPR) on the Global Precipitation Measurement mission core satellite is a spaceborne instrument capable of estimating these two quantities through dual-wavelength measurements. In this study, we evaluate bulk statistics on the ice particle properties derived from dual-wavelength radar data in relation to the properties of rain underneath. Specifically, we focus on DPR observations over stratiform precipitation, characterized by columns exhibiting a prominent bright band, where the melting layer can be easily detected. Our analysis reveals a large increase in the retrieved mass flux as we transition from the ice to the rain phase in the official DPR product. This observation is in disagreement with our expectation that mass flux should remain relatively stable across the bright band in cold-rain conditions. To address these discrepancies, we propose an alternative retrieval algorithm that ensures a gradual transition of Dm (mean mass-weighted particle melted-equivalent diameter) and the precipitation rate across the melting zone. This approach also helps in estimating bulk ice density above the melting level. These findings demonstrate that DPR observations can not only quantify ice particle content and their size above stratiform rain regions but also estimate bulk density, provided uniform conditions that minimize uncertainties related to partial beam filling.

radar measurements from space↗
NASA NTRS1988

Comparative morphometry of fibers and capillaries in soleus following weightlessness (SL-3) and suspension

This work is a continuation of efforts to assess responses of rat skeletal muscle to weightlessness (W) and earthside laboratory experiments with unloading of hind limbs. The soleus is a slow-twitch, load-bearing (antigravity) muscle. Both exposure to W and to the hypokinesia/hypodynamia of whole-body suspension (WBS) results in soleus atrophy. Cross-sectional areas of both slow- and fast-twitch fibers decrease during 7 days of W or 7 or 14 days of WBS. Density and area changes tended to reverse to control levels during 7 days of recovery (R) following WBS. Capillary density was increased with 7 days of W or 7 or 14 days of WBS. During 7 days of R the capillary density returned toward control levels. In summary, the reduction in fiber cross-sectional areas and the increase in fiber and capillary densities support the hypothesis that in both W and WBS there is a loss in soleus muscle cell mass and not in fiber numbers.

Musacchia, X. J.↗
DOE OSTI2024

A Scalable & Non-Destructive Characterization Strategy to Study Semiconductor/Dielectric Interfaces and Predict Wafer-Level Device Performance

The defect density present at the dielectric-semiconductor interface in an MOS structure directly influences the channel carrier characteristics in semiconductor devices, especially in wide bandgap material systems used in power devices. While these trap defects are typically quantified through electrical characterization of MOS-capacitor test structures, this treatment offers very little insight into the physical nature of interface defects. Such shortcomings demand a physical characterization strategy to guide fabrication optimization. X-ray photoelectron spectroscopy (XPS) is suggested as a viable technique to determine chemical data for dielectric interfaces formed using atomic layer deposition (ALD) on GaN substrates. Previously, 1-D XPS characterization has confirmed the presence of a Ga x O y interlayer between ALD dielectrics and the GaN substrate. In this work, XPS data is serially collected to form 2-D images of an ALD-Al 2 O 3 /GaN interface as a proof-of-concept experiment for in-situ XPS quality monitoring during ALD processing. The information provided by this work reveals some of the challenges for incorporating XPS characterization as an in-situ strategy during fabrication of GaN-based devices. Separately, electrical mapping of a 2-D array of ALD-Al 2 O 3 /GaN MOS-capacitor devices provide a means to quantify the spatial variations in interface quality across a single wafer. Physical characterization techniques, such as time-of-flight secondary ion mass spectroscopy, provide additional chemical information about the Al 2 O 3 /Ga x O y /GaN structure that complement the electrical mapping results. This analysis shows that a higher Ga x O y content correlates with higher interface state defects for trap energies deep in the band gap.

42 ENGINEERING↗
NASA NTRS1987

Aspects of interplanetary plasma turbulence

Data acquired in the free solar wind by the ISEE 1 and ISEE 2 propagation experiment were used to obtain the power spectra of fluctuations in electron density; a maximum-entropy technique has made it possible to exploit fully the intrinsic precision of the in situ measurements. The results have led to a new determination of the anisotropy of density fluctuations in the solar wind, which is in conflict with certain expectations based on the propagation of Langmuir waves, but is in agreement with multistation interplanetary-scintillation measurements: it could well be that Langmuir wave growth rates during type III solar bursts are much larger than has been inferred from the electron distribution function, whose measurement involves averaging over relatively long time intervals. The relation between the fluctuation level and the mean density is studied, and tentative evidence for a correlation between the relative fluctuation level and proton temperature is presented.

Celnikier, L. M.↗