Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LINE DEFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Roller Bearing Health Monitoring Using CPLE Frequency Analysis Method

This paper describes a unique vibration signature analysis technique Coherence Phase Line Enhancer (CPLE) Frequency Analysis - for roller bearing health monitoring. Defects of roller bearing (e.g. wear, foreign debris, crack in bearing supporting structure, etc.) can cause small bearing characteristic frequency shifts due to minor changes in bearing geometry. Such frequency shifts are often too small to detect by the conventional Power Spectral Density (PSD) due to its frequency bandwidth limitation. This Coherent Phase Line Enhancer technology has been evolving over the last few years and has culminated in the introduction of a new and novel frequency spectrum which is fully described in this paper. This CPLE technology uses a "key phasor" or speed probe as a preprocessor for this analysis. With the aid of this key phasor, this CPLE technology can develop a two dimensional frequency spectrum that preserves both amplitude and phase that is not normally obtained using conventional frequency analysis. This two-dimensional frequency transformation results in several newly defined spectral functions; i. e. CPLE-PSD, CPLE-Coherence and the CPLE-Frequency. This paper uses this CPLE frequency analysis to detect subtle, low level bearing related signals in the High Pressure Fuel Pump (HPFP) of the Space Shuttle Main Engine (SSME). For many rotating machinery applications, a key phasor is an essential measurement that is used in the detection of bearing related signatures. There are times however, when a key phasor is not available; i. e. during flight of any of the SSME turbopumps or on the SSME High Pressure Oxygen Turbopump (HPOTP) where no speed probe is present. In this case, the CPLE analysis approach can still be achieved using a novel Pseudo Key Phasor (PKP) technique to reconstruct a 1/Rev PKP signal directly from external vibration measurements. This paper develops this Pseudo Key Phasor technique and applies it to the SSME vibration data.

Jong, Jen-Yi↗

Depth-Dependent Critical Behavior in V2H

Using x-ray diffuse scattering, we investigate the critical behavior of an order-disorder phase transition in a defective 'skin layer' of V{sub 2}H. In the skin layer, there exist walls of dislocation lines oriented normal to the surface. The density of dislocation lines within a wall decreases continuously with depth. We find that, because of this inhomogeneous distribution of defects, the transition effectively occurs at a depth-dependent local critical temperature. A depth-dependent scaling law is proposed to describe the corresponding critical ordering behavior.

36 MATERIALS SCIENCE↗

Non-canonical microRNAs miR-320 and miR-702 promote proliferation in Dgcr8-deficient embryonic stem cells

Highlights: Black-Right-Pointing-Pointer Embryonic stem cells (ESCs) lacking non-canonical miRNAs proliferate slower. Black-Right-Pointing-Pointer miR-320 and miR-702 are two non-canonical miRNAs expressed in ESCs. Black-Right-Pointing-Pointer miR-320 and miR-702 promote proliferation of Dgcr8-deficient ESCs. Black-Right-Pointing-Pointer miR-320 targets p57 and helps to release Dgcr8-deficient ESCs from G1 arrest. Black-Right-Pointing-Pointer miR-702 targets p21 and helps to release Dgcr8-deficient ESCs from G1 arrest. -- Abstract: MicroRNAs are known to contribute significantly to stem cell phenotype by post-transcriptionally regulating gene expression. Most of our knowledge of microRNAs comes from the study of canonical microRNAs that require two sequential cleavages by the Drosha/Dgcr8 heterodimer and Dicer to generate mature products. In contrast, non-canonical microRNAs bypass the cleavage by the Drosha/Dgcr8 heterodimer within the nucleus but still require cytoplasmic cleavage by Dicer. The function of non-canonical microRNAs in embryonic stem cells (ESCs) remains obscure. It has been hypothesized that non-canonical microRNAs have important roles in ESCs based upon the phenotypes of ESC lines that lack these specific classes of microRNAs; Dicer-deficient ESCs lacking both canonical and non-canonical microRNAs have much more severe proliferation defect than Dgcr8-deficient ESCs lacking only canonical microRNAs. Using these cell lines, we identified two non-canonical microRNAs, miR-320 and miR-702, that promote proliferation of Dgcr8-deficient ESCs by releasing them from G1 arrest. This is accomplished by targeting the 3 Prime -untranslated regions of the cell cycle inhibitors p57 and p21 and thereby inhibiting their expression. This is the first report of the crucial role of non-canonical microRNAs in ESCs.

60 APPLIED LIFE SCIENCES↗

Fractional magnetic charges and channeling of Faraday lines by disclinations in artificial spin ice

We have studied the magnetic moments of artificial spin ice arrays of nanomagnets in both undistorted square arrays and in arrays with a topological defect induced by a single disclination. We confirm that the disclination induces global, macroscopic changes in the low-energy collective states of the nanomagnet moment configuration. Specifically, the disclination leads to Faraday lines of effective magnetic flux that run from the center all the way to the edge of the arrays. Moreover, the geometric deformation, induced by the topological defect, curves the geometry such that these Faraday lines are channeled preferentially by the arrays’ curved geometry. Our results demonstrate how the intentional combination of topology and geometry can be designed to control magnetic charges and the flow of local magnetization and thus manipulate associated collective excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Inherent paramagnetic defects in layered Si/SiO{sub 2} superstructures with Si nanocrystals

An extensive electron spin resonance (ESR) analysis has been carried out on structures comprised of Si nanoparticles ({approx}2 nm across) embedded in a regular pattern in an amorphous SiO{sub 2} matrix, fabricated by the SiO/SiO{sub 2} superlattice approach, with the intent to reveal and quantify occurring paramagnetic defects. The as-grown state is found to exhibit only a Si dangling bond (DB) signal, which through combination of first and second harmonic X-, K-, and Q-band observations in combination with computer spectra simulation, could be conclusively disentangled as solely comprised of overlapping powder pattern spectra of P{sub b(0)} and P{sub b1} defects, the archetypal intrinsic defects of the Si/SiO{sub 2} interface, with no evidence for a D line (Si DBs in disordered Si). This indicates a full crystalline system of randomly oriented Si nanocrystals (NCs). The P{sub b(0)}/P{sub b1} defect system, pertaining to the NC-Si/SiO{sub 2} interfaces, is found to be both qualitatively and quantitatively much alike that of standard (high-quality) thermal Si/SiO{sub 2}. The system is inherent, remaining unaffected by subsequent UV/vacuum UV irradiations. Relying on the known properties of P{sub b}-type defects in standard microscopic Si/SiO{sub 2}, the data would comply with Si nanocrystallites, in average, predominantly bordered by (111) and (100) facets, perhaps with morphology, schematically, of [100] truncated (111) octahedrons. Based on independent NC particles counting, there appears a P{sub b}-type center at {approx}71% of the Si NCs indicating the latter to be comprised of two subsystems-with or without an incorporated strain relaxing interface defect-which in that case will exhibit drastically different defect-sensitive properties, such as, e.g., photoluminescence (PL). Upon additional optical irradiation, two more defects appear, i.e., the SiO{sub 2}-associated E{sub {gamma}}{sup '} and EX centers, where the observed density of the former, taken as criterion, indicates the SiO{sub 2} matrix to be of standard thermal oxide quality. Thus, the properties of the revealed crucial intrinsic point defects bear out a high quality of both the NC-Si/SiO{sub 2} interfaces and the embedding SiO{sub 2}, alike that of standard thermal Si/SiO{sub 2}. In combination with H passivation/depassivation treatments, the degrading impact of the optical excitation ({approx}360 nm) itself used during PL measurements has been studied, revealing weak ESR reactivation of P{sub b(0)}, P{sub b1}, and E{sub {gamma}}{sup '} defects.

36 MATERIALS SCIENCE↗

Quantitative three-dimensional characterization of block copolymer directed self-assembly on combined chemical and topographical prepatterned templates

Characterization of the three-dimensional (3D) structure in directed self-assembly (DSA) of block copolymers is crucial for understanding the complex relationships between the guiding template and the resulting polymer structure so DSA could be successfully implemented for advanced lithography applications. Here, we combined scanning transmission electron microscopy (STEM) tomography and coarse-grain simulations to probe the 3D structure of P2VP- b -PS- b -P2VP assembled on prepatterned templates using solvent vapor annealing. The templates consisted of nonpreferential background and raised guiding stripes that had PS-preferential top surfaces and P2VP-preferential sidewalls. The full 3D characterization allowed us to quantify the shape of the polymer domains and the interface between domains as a function of depth in the film and template geometry and offered important insights that were not accessible with 2D metrology. Sidewall guiding was advantageous in promoting the alignment and lowering the roughness of the P2VP domains over the sidewalls, but incommensurate confinement from the increased topography could cause roughness and intermittent dislocations in domains over the background region at the bottom of the film. The 3D characterization of bridge structures between domains over the background and breaks within domains on guiding lines sheds light on possible origins of common DSA defects. The positional fluctuations of the PS/P2VP interface between domains showed a depth-dependent behavior, with high levels of fluctuations near both the free surface of the film and the substrate and lower fluctuation levels in the middle of the film. As a result, this research demonstrates how 3D characterization offers a better understanding of DSA processes, leading to better design and fabrication of directing templates.

36 MATERIALS SCIENCE↗

Swift heavy ion induced structural changes in CdS thin films possessing different microstructures: A comparative study

This study is carried out to verify the role of thin film microstructure in determining the energy relaxation processes of swift heavy ions in CdS polycrystalline thin films. Two sets of CdS thin film samples, differing in their microstructures, prepared using thermal evaporation and spray pyrolysis, are irradiated with 100 MeV Ag ions using Pelletron accelerator. It is observed that the effects produced differ significantly in the two films. For the evaporated films, defect annealing dominates for lower irradiation fluences but at higher fluences the effects due to defect creation and their migration are dominant. A transformation from the metastable cubic to hexagonal phase together with the creation of a significant amount of compressive strain is seen in these films for irradiation at the highest fluence. The optical absorption of the samples shows an increase in band gap from 2.34 eV for the as grown film to 2.43 eV for the sample irradiated at the highest fluence that is further confirmed by photoluminescence (PL) studies. In contrast, the spray deposited samples undergo a significant improvement of crystalline quality for all fluences as shown by an increase in x-ray diffraction peak intensity, sharper optical absorption edge, reduction in defect PL intensity, and removal of asymmetry in the line shape of the longitudinal optical phonon on its lower wavenumber side in Raman spectra.

36 MATERIALS SCIENCE↗

Development and Evaluation of a Drone-Deployed Wind Turbine Blade Nondestructive Inspection System

Wind energy is quickly becoming a significant contributor to the United States' overall energy portfolio. Wind turbine blades pose a unique set of inspection challenges that span from very thick and attenuative spar cap structures to porous bond lines, varying core material and a multitude of manufacturing defects of interest. The need for viable, accurate nondestructive inspection (NDI) technology becomes more important as the cost per blade, and lost revenue from downtime, grows. To address this growing need, Sandia and SkySpecs collaborated to evaluate NDI methods that are suitable for integration on an autonomous drone inspection platform. A trade study of these NDI methods was performed, and thermography was selected as the primary technique for further evaluation. Based on the capabilities of SkySpecs' custom inspection drone, a miniature microbolometer IR camera was successfully selected and tested in a benchtop setting. After identifying key operating parameters for inspecting wind blade materials, hardware and software integration of the IR camera was performed, and Sandia and SkySpecs conducted initial field testing. Finally, recommendations for a path forward for drone-deployed thermography inspections were provided.

17 WIND ENERGY↗

Hydrogen Sensors Boost Hybrids; Today's Models Losing Gas?

Advanced chemical sensors are used in aeronautic and space applications to provide safety monitoring, emission monitoring, and fire detection. In order to fully do their jobs, these sensors must be able to operate in a range of environments. NASA has developed sensor technologies addressing these needs with the intent of improving safety, optimizing combustion efficiencies, and controlling emissions. On the ground, the chemical sensors were developed by NASA engineers to detect potential hydrogen leaks during Space Shuttle launch operations. The Space Shuttle uses a combination of hydrogen and oxygen as fuel for its main engines. Liquid hydrogen is pumped to the external tank from a storage tank located several hundred feet away. Any hydrogen leak could potentially result in a hydrogen fire, which is invisible to the naked eye. It is important to detect the presence of a hydrogen fire in order to prevent a major accident. In the air, the same hydrogen-leak dangers are present. Stress and temperature changes can cause tiny cracks or holes to form in the tubes that line the Space Shuttle s main engine nozzle. Such defects could allow the hydrogen that is pumped through the nozzle during firing to escape. Responding to the challenges associated with pinpointing hydrogen leaks, NASA endeavored to improve propellant leak-detection capabilities during assembly, pre-launch operations, and flight. The objective was to reduce the operational cost of assembling and maintaining hydrogen delivery systems with automated detection systems. In particular, efforts have been focused on developing an automated hydrogen leak-detection system using multiple, networked hydrogen sensors that are operable in harsh conditions.

Source record↗

Relating Aerial Infrared Thermography Defects to Photovoltaic Performance: Preprint

In this research, we examine the relationship between aerial IR defect analysis and photovoltaic (PV) performance data for twelve utility- and commercial-scale solar sites in the United States. To do this, we fuse the site diagram geoJSON's, aerial infrared thermography (aIRT) defect analyses, and associated inverter time series, allowing for a direct comparison between site defects and time series data. Defect analyses were provided by Zeitview, under its Solar Insights platform. Following the data fusion process, we look at the relationship between system performance and aIRT defects. We investigate the relationship between degradation and hotspot defects, as well as the relationship between AC power data and offline strings and misaligned modules. In general, system degradation was not affected by long-term or balance-of-system (BoS) defects as they occurred infrequently in the data set. However, for one system, a near statistically significant relationship (p-value=0.057) was found when comparing the degradation of inverter blocks with several multi-hotspot defects to all other inverter blocks without this particular defect. There was strong alignment when comparing short-term recoverable module defects such as stuck trackers and offline strings to time series data. In general, we found that when an inverter block has more than 80% of modules flagged for one of these defects, its AC power time data is flat-lined and the inverter block is not producing.

aerial inspection↗

Dynamical regimes of vortex flow in type-II superconductors with parallel twin boundaries

We explore the dynamics of driven magnetic flux lines in disordered type-II superconductors in the presence of twin boundaries oriented parallel to the direction of the applied magnetic field, using a three-dimensional elastic line model simulated with Langevin molecular dynamics. The lines are driven perpendicular to the planes to model the effect of an electric current applied parallel to the planes and perpendicular to the magnetic field. A study of the long-time non-equilibrium steady states for varying sample orientation and thickness reveals a rich collection of dynamical regimes spanning the depinning crossover region that separates the pinned and moving-lattice states of vortex matter. We observe the emergence of a preferred direction for the ordering of the Abrikosov lattice in the free- owing vortex regime due to asymmetric pinning by the planar defects. Furthermore, we have performed novel direct measurements of flux line excitations such as half-loops and double kinks to aid the characterization of the topologically rich flux flow profile.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxial growth and scanning tunneling microscopy studies of the gallium rich trench line structure on N-polar w-GaN( 000 1 ¯ )

In addition to the usual set of the well-known reconstructions that have been observed on the N-polar GaN surface, namely 1×1, 3×3, 6×6, and c(6×12), an additional structure is occasionally seen at high Ga coverage, which can extend over a large area of the surface. This structure, which is referred to as trench line structure, is partially ordered and consists of parallel-running dark (trench) lines separating wide and narrow strips of atomically ordered regions. There are also randomly placed defects interrupting the ideal ordering. Reflection high energy electron diffraction and scanning tunneling microscopy in ultrahigh vacuum are applied to investigate this trench line structure on samples prepared using molecular beam epitaxy. It is found that the trench line structure results from annealing the Ga-rich c(6×12) at high temperature followed by quenching to room temperature. By careful comparison of the scanning tunneling microscopy images with those from neighboring c(6×12) regions, it is found that the trench line structure can be decomposed into subunits of the c(6×12). Using these subunits, some simple models for the trench line structure are created. It is proposed that the trench line structure is composed of two primary c(6×12) subunits consisting of first and second layer Ga adatoms and that the trench lines are regions devoid of Ga adatoms, going down to the Ga adlayer.

36 MATERIALS SCIENCE↗

System and process for detecting and monitoring surface defects

A system and process for detecting and monitoring defects in large surfaces such as the field joints of the container segments of a space shuttle booster motor. Beams of semi-collimated light from three non-parallel fiber optic light panels are directed at a region of the surface at non-normal angles of expected incidence. A video camera gathers some portion of the light that is reflected at an angle other than the angle of expected reflectance, and generates signals which are analyzed to discern defects in the surface. The analysis may be performed by visual inspection of an image on a video monitor, or by inspection of filtered or otherwise processed images. In one alternative embodiment, successive predetermined regions of the surface are aligned with the light source before illumination, thereby permitting efficient detection of defects in a large surface. Such alignment is performed by using a line scan gauge to sense the light which passes through an aperture in the surface. In another embodiment a digital map of the surface is created, thereby permitting the maintenance of records detailing changes in the location or size of defects as the container segment is refurbished and re-used. The defect detection apparatus may also be advantageously mounted on a fixture which engages the edge of a container segment.

Mueller, Mark K.↗

Critically Evaluated Energy Levels and Spectral Lines of Singly Ionized Indium (In II)

A comprehensive list of the best measured wavelengths in the In II spectrum has been compiled. Uncertainties of the wavelength measurements have been analyzed, and existing inconsistencies have been resolved. An optimized set of fine-structure energy levels that fits all observed wavelengths has been derived. Uncertainties of the energy level values have been reduced by an order of magnitude. An improved value of the ionization limit of In II has been determined by fitting quantum-defect and polarization formulas for several series of levels. Intensities of lines observed by different authors have been analyzed and converted to a uniform scale. A set of recommended values of radiative transition rates has been critically compiled, and uncertainties of these rates have been estimated. The hyperfine structure interval in the 5s 2 S ground state of In III has been determined from the measurements of the 5sng and 5snh series in In II.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Native defects and impurity band behavior in half-Heusler thermoelectric NbFeSb

To investigate the electronic behavior and magnetic properties of NbFeSb, we have performed 93 Nb NMR, specific heat and magnetic measurements on NbFeSb samples heat treated at high temperatures. In this work, magnetic measurements combined with an observed Schottky anomaly and changes in the NMR line width indicate the presence of a 0.2% concentrated native magnetic defect in stoichiometric NbFeSb samples. The origin of these native defects is believed to be due to Fe antisites on Nb sites. In addition, NMR shift and spin–lattice relaxation results below 200 K reveal a Korringa-like response indicating heavily-doped p-type behavior due to native defects. Above 280 K, this converts to an activated behavior, indicating the presence of an impurity band, empty at low temperatures, which is located around 0.03 eV above the valence band maximum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of PVT Grown ZnSe by Low Temperature Photoluminescence

ZnSe, a II-VI semiconductor with a large direct band gap of 2.7 eV at room temperature and 2.82 eV at 10 K, is considered a promising material for optoelectric applications in the blue-green region of the spectrum. Photoemitting devices and diode laser action has been demonstrated as a result of decades of research. A key issue in the development of II-VI semiconductors is the control of the concentration of the various impurities. The II-VI semiconductors seem to defy the effort of high level doping due to the well known self compensation of the donors and the acceptors. A good understanding of roles of the impurities and the behavior of the various intrinsic defects such as vacancies, interstitials and their complexes with impurities is necessary in the development and application of these materials. Persistent impurities such as Li and Cu have long played a central role in the photoelectronic properties of many II-VI compounds, particularly ZnSe. The shallow centers which may promote useful electrical conductivity are of particular interest. They contribute the richly structured near gap edge luminescence, containing weak to moderate phonon coupling and therefore very accessible information about the energy states of the different centers. Significance of those residual impurities which may contribute such centers in II-VI semiconductors must be fully appreciated before improved control of their electrical properties may be possible. Low temperature photoluminescence spectroscopy is an important source of information and a useful tool of characterization of II-VI semiconductors such as ZnSe. The low temperature photoluminescence spectrum of a ZnSe single crystal typically consists of a broad band emission peaking at 2.34 eV, known as the Cu-green band, and some very sharp lines near the band gap. These bands and lines are used to identify the impurity ingredients and the defects. The assessment of the quality of the crystal based on the photoluminescence analysis is then possible. In this report we present the characterization of a ZnSe single crystal as grown by the physical vapor transport method, with special intention paid to the possible effects of the gravitational field to the growth of the crystal.

Wang, Ling Jun↗

Outbursts In Symbiotic Binaries (FUSE 2000)

During the past year, we made good progress on analysis of FUSE observations of the symbiotic binary Z And. For background, Z And is a binary system composed of a red giant and a hot component of unknown status. The orbital period is roughly 750 days. The hot component undergoes large-scale eruptions every 10-20 yr. An outburst began several years ago, triggering this FUSE opportunity. First, we obtained an excellent set of ground-based optical data in support, of the FUSE observations. We used FAST, a high throughput low resolution spectrograph on the 1.5-m telescope at Mt. Hopkins, Arizona. A 300 g/ mm grating blazed at 4750 A, a 3 in. slit, and a thinned Loral 512 x 2688 CCD gave us spectra covering 3800-7500 A at a resolution of 6 A. The wavelength solution for each spectrum has a probable error of +/- 0.5 A or better. Most of the resulting spectra have moderate signal-to-noise, S/.N approx. greater than 30 per pixel. The time coverage for these spectra is excellent. Typically, we acquired spectra every 1-2 nights during dark runs at Mt. Hopkins. These data cover most of the rise and all of the decline of the recent outburst. The spectra show a wealth of emission lines, including H I, He I, He II, [Fe V11], and the Raman scattering bands at 6830 A and 7088 A. The Raman bands and other high ionization features vary considerably throughout the outburst. These features will enable us to correlate variations in the FUSE spectra with variations in the optical spectra. Second, we began an analysis of FUSE spectra of Z And. We have carefully examined the spectra, identifying real features and defects. We have identified and measured fluxes for all strong emission lines, including the O VI doublet at 1032 A and 1038 A. These and several other strong emission lines display pronounced P Cygni absorption components indicative of outgrowing gas. We will attempt to correlate these velocities with similar profiles observed on optical spectra. The line velocities - together with line variations - will yield physical parameters for the expanding shell of gas in the outer atmosphere of the hot component. We also worked on several diagnostic tools, including upgrades to photoionization programs developed by the PI and others. We plan to use these tools to derive electron densities and temperatures front intercombination and forbidden lines observed on optical and FUSE spectra. Preliminary results indicate a large electron density, n(sub e) is greater than or = 10(exp 10)/cc and a modest electron temperature, T(sub e) approx. 20,000 K. We see no evidence for shocked gas as observed in some other symbiotics. However, we have yet to include several important lines of [Fe VII] and [Ne V] in the analysis. Inclusion of these lines will yield an improved estimate of the electron temperature in the gas. Finally, we have one additional FUSE spectrum planned for acquisition during this cycle. These data will provide important information concerning the state of the system farther along in its decline. Once we have this spectrum in hand, we plan to complete our analysis and publish our results.

Kenyon, Scott J.↗

Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography

Polymer electrolyte membrane fuel cells are energy conversion devices that offer high power densities and high efficiencies for mobile and other applications. Successful introduction into the marketplace requires addressing cost barriers such as production volumes and platinum loading. For cost reduction, it is vital to minimize waste and maximize quality during the manufacturing of platinum-containing electrodes, including gas diffusion electrodes (GDEs). In this work, we report on developing a quality control diagnostic for GDEs, involving creating an ex situ exothermic reaction on the electrode surface and using infrared thermography to measure the resulting temperature profile. Experiments with a moving GDE containing created defects were conducted to demonstrate the applicability of the diagnostic for real-time web-line inspection.

30 DIRECT ENERGY CONVERSION↗