Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LASER OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Attainment of a 40 TW peak output power with a visible-range hybrid femtosecond laser system

We report the results of investigations aimed at raising the peak output power of a THL-100 visible-range hybrid femtosecond laser system based on a XeF(C − A) photodissociation amplifier. The increase in power was achieved due to the shortening of the pulse duration at the system output by broadening the spectral profile of the second harmonic from 5.3 to 8 nm, which takes place in the transformation of a negatively chirped pulse of the fundamental frequency radiation in a nonlinear KDP crystal. After the KDP the radiation pulse was stretched to 1.8 ps in a prism stretcher and amplified in the XeF(C − A) amplifier. The energy obtained at the amplifier output was 1.2 J. After compression of the amplified output pulse, its duration was equal to 29.4 fs, which means that a peak output power of 40 TW was reached at the output of the laser system. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wavelength-scale deformed microdisk lasers

We investigate lasing and output directionality of limacon-shaped microdisk lasers of dimensions comparable to the emission wavelength. The far-field patterns are shown to differ between lasing modes, unlike in large cavities where lasing modes exhibit universal emission directionality determined by chaotic ray dynamics. Unidirectional emission is obtained for certain modes in the wavelength-scale cavities. It results from weak coupling of nearly isotropic high-quality resonances to anisotropic low-quality resonances, combined with chiral symmetry breaking of clockwise and counterclockwise propagating waves. The latter is described by an extended ray dynamics which includes the Goos-Haenchen shift and the Fresnel filtering. Mode hybridization and wave effects in open cavities make it possible to control the output properties of individual lasing modes in wavelength-scale lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theory of quenching quantum fluctuations of a laser system with a ladder-type configuration

The theory of a laser system with a ladder-type configuration is studied in detail based on the quantum Langevin approach. By using an external field to link the lower lasing level with another atomic level, whose decay rate is much larger, laser intensity significantly increases and the quantum-limited linewidth can be quenched. We also discuss the spectrum of fluctuations of the output field, and the result shows that the fluctuations at low frequencies can be much suppressed too. On the other hand, this quenching approach can realize a laser output between two atomic levels, whose decay rates do not satisfy the usual lasing condition that the decay rate of the lower lasing level should be larger than that of the upper lasing level. It will be very useful to realize a laser output with the wavelength we want. This quenching approach has been widely used in the absorption spectrum of the ytterbium optical lattice clock and in the laser cooling approach for calcium atoms. Here we apply it in the stimulated emission of lasers.

74 ATOMIC AND MOLECULAR PHYSICS↗

Large mode-volume, large beta, photonic crystal laser resonator

We propose an optical resonator formed from the coupling of 13, L2 defects in a triangular-lattice photonic crystal slab. Using a tight-binding formalism, we optimized the coupled-defect cavity design to obtain a resonator with predicted single-mode operation, a mode volume five times that of an L2-cavity mode and a beta factor of 0.39. The results are confirmed using finite-difference time domain simulations. This resonator is very promising for use as a single mode photonic crystal vertical-cavity surface-emitting laser with high saturation output power compared to a laser consisting of one of the single-defect cavities.

36 MATERIALS SCIENCE↗

Continuous-wave Cr{sup 2+}:CdS laser

Continuous-wave lasing is obtained for the first time in a Cr{sup 2+}:CdS crystal pumped by a thulium fibre laser at 1908 nm. The output power of the laser at 2534 nm achieved 0.81 W with the slope efficiency with respect to the absorbed pump power equal to 52.3%. The parameters of Cr{sup 2+}:CdS and Cr{sup 2+}:CdSe lasers are compared. A Cr{sup 2+}:CdSe crystal generated 1.7 W of cw radiation at 2638 nm with the slope efficiency with respect to the absorbed power equal to 53.4%. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical Heterodyne With Lower Phase Noise

Proposed improvement enhances utility of optical-heterodyne apparatus used to generate radio signal at chosen frequency between 1 and 1,000 GHz. Two lasers injection-locked to third, mode-locked laser. Beat-frequency heterodyne output contains much less phase noise if generated from outputs of two independent lasers, and phase-coherent with reference signal. Potential applications include phased-array radar, fiber-optic communication systems, fiber-optic stabilized oscillators, and other applications involving conversions between optical and millimeter-wave signals.

Logan, Ronald T.↗

A Multi-Wavelength IR Laser for Space Applications

We present a laser technology development with space flight heritage to generate laser wavelengths in the near- to mid-infrared (NIR to MIR) for space lidar applications. Integrating an optical parametric crystal to the LOLA (Lunar Orbiter Laser Altimeter) laser transmitter design affords selective laser wavelengths from NIR to MIR that are not easily obtainable from traditional diode pumped solid-state lasers. By replacing the output coupler of the LOLA laser with a properly designed parametric crystal, we successfully demonstrated a monolithic intra-cavity optical parametric oscillator (iOPO) laser based on all high technology readiness level (TRL) subsystems and components. Several desired wavelengths have been generated including 2.1 microns, 2.7 microns and 3.4 microns. This laser can also be used in trace-gas remote sensing, as many molecules possess their unique vibrational transitions in NIR to MIR wavelength region, as well as in time-of-flight mass spectrometer where desorption of samples using MIR laser wavelengths have been successfully demonstrated.

Laser↗

CO2 laser experiments using nuclear reactions as the ionization source.

Experimental studies show that the output of a CO2 laser is significantly increased by products of the nuclear reaction He-3 (n,p)T. Helium-3 was used in lieu of the natural helium normally present in the 1:1:8 CO2:N2:He laser gas mixture (pressure = 6 torr). The laser assembly was then exposed to a reactor thermal neutron flux of about 100 million neutrons/sq cm/sec. Power output of the laser doubled while the electrical power input decreased; electrical efficiency was thus more than doubled. Results indicate that additional ionization by the energetic charged particles may be responsible for the improved laser performance.

Rhoads, H. S.↗

Semiconductor Laser With Multilayer Dielectric Reflector

Multilayer dielectric reflector included in proposed surface-emitting, distributed-feedback, grating semiconductor laser (e.g., a GaAlAs device). Contributes to efficiency and output power of laser by reducing amount of light entering substrate, where wasted by absorption. Index of refraction in reflector sublayers alternates between higher and lower value. Higher value less than effective index of refraction of waveguide layer.

Lang, Robert J.↗

All solid-state high power visible laser

The overall objective of this Phase 2 effort was to develop and deliver to NASA a high repetition rate laser-diode-pumped solid-state pulsed laser system with output in the green portion of the spectrum. The laser is for use in data communications, and high efficiency, short pulses, and low timing jitter are important features. A short-pulse 1 micron laser oscillator, a new multi-pass amplifier to boost the infrared power, and a frequency doubler to take the amplified infrared pulsed laser light into the green. This produced 1.5 W of light in the visible at a pulse repetition rate of 20 kHz in the laboratory. The pulses have a full-width at half maximum of near 1 ns. The results of this program are being commercialized.

Grossman, William M.↗

Stabilizing laser energy density on a target during pulsed laser deposition of thin films

A process for stabilizing laser energy density on a target surface during pulsed laser deposition of thin films controls the focused laser spot on the target. The process involves imaging an image-aperture positioned in the beamline. This eliminates changes in the beam dimensions of the laser. A continuously variable attenuator located in between the output of the laser and the imaged image-aperture adjusts the energy to a desired level by running the laser in a "constant voltage" mode. The process provides reproducibility and controllability for deposition of electronic thin films by pulsed laser deposition.

36 MATERIALS SCIENCE↗

Optimizing coherent lidar performance with graded-reflectance laser resonator optics

It is demonstrated how the design of graded-reflectance output coupler unstable laser cavities may be tailored to significantly enhance the overall power transmission efficiency of a given laser system relative to that of a conventional diffractively coupled unstable resonator. The importance of these findings in coherent lidar applications is explained with particular emphasis on projected space-based systems.

Tratt, David M.↗

Bistable polarization switching in a continuous wave ruby laser

Bistability in the output power, polarization state, and mode volume of an argon-ion laser pumped single mode ruby laser at 6943 A has been observed. The laser operates in a radially confined mode which exhibits hysteresis and bistability only when the pump polarization is parallel to the c-axis.

Lawandy, N. M.↗

Laser Wakefield Acceleration: Structural and Dynamic Studies. Final Technical Report ER40954

Particle accelerators enable scientists to study the fundamental structure of the universe, but have become the largest and most expensive of scientific instruments. In this project, we advanced the science and technology of laser-plasma accelerators, which are thousands of times smaller and less expensive than their conventional counterparts. In a laser-plasma accelerator, a powerful laser pulse exerts light pressure on an ionized gas, or plasma, thereby driving an electron density wave, which resembles the wake behind a boat. Electrostatic fields within this plasma wake reach tens of billions of volts per meter, fields far stronger than ordinary non-plasma matter (such as the matter that a conventional accelerator is made of) can withstand. Under the right conditions, stray electrons from the surrounding plasma become trapped within these “wake-fields”, surf them, and acquire energy much faster than is possible in a conventional accelerator. Laser-plasma accelerators thus might herald a new generation of compact, low-cost accelerators for future particle physics, x-ray and medical research. In this project, we made two major advances in the science of laser-plasma accelerators. The first of these was to accelerate electrons beyond 1 gigaelectronvolt (1 GeV) for the first time. In experimental results reported in Nature Communications in 2013, about 1 billion electrons were captured from a tenuous plasma (about 1/100 of atmosphere density) and accelerated to 2 GeV within about one inch, while maintaining less than 5% energy spread, and spreading out less than ½ milliradian (i.e. ½ millimeter per meter of travel). Low energy spread and high beam collimation are important for applications of accelerators as coherent x-ray sources or particle colliders. This advance was made possible by exploiting unique properties of the Texas Petawatt Laser, a powerful laser at the University of Texas at Austin that produces pulses of 150 femtoseconds (1 femtosecond is 10-15 seconds) in duration and 150 Joules in energy (equivalent to the muzzle energy of a small pistol bullet). This duration was well matched to the natural electron density oscillation period of plasma of 1/100 atmospheric density, enabling efficient excitation of a plasma wake, while this energy was sufficient to drive a high-amplitude wake of the right shape to produce an energetic, collimated electron beam. Continuing research is aimed at increasing electron energy even further, increasing the number of electrons captured and accelerated, and developing applications of the compact, multi-GeV accelerator as a coherent, hard x-ray source for materials science, biomedical imaging and homeland security applications. The second major advance under this project was to develop new methods of visualizing the laser-driven plasma wake structures that underlie laser-plasma accelerators. Visualizing these structures is essential to understanding, optimizing and scaling laser-plasma accelerators. Yet prior to work under this project, computer simulations based on estimated initial conditions were the sole source of detailed knowledge of the complex, evolving internal structure of laser-driven plasma wakes. In this project we developed and demonstrated a suite of optical visualization methods based on well-known methods such as holography, streak cameras, and coherence tomography, but adapted to the ultrafast, light-speed, microscopic world of laser-driven plasma wakes. Our methods output images of laser-driven plasma structures in a single laser shot. We first reported snapshots of low-amplitude laser wakes in Nature Physics in 2006. We subsequently reported images of high-amplitude laser-driven plasma “bubbles”, which are important for producing electron beams with low energy spread, in Physical Review Letters in 2010. More recently, we have figured out how to image laser-driven structures that change shape while propagating in a single laser shot. The latter techniques, which use the methods of computerized tomography, were demonstrated on test objects – e.g. laser-driven filaments in air and glass – and reported in Optics Letters in 2013 and Nature Communications in 2014. Their output is a multi-frame movie rather than a snapshot. Continuing research is aimed at applying these tomographic methods directly to evolving laser-driven plasma accelerator structures in our laboratory, then, once perfected, to exporting them to plasma-based accelerator laboratories around the world as standard in-line metrology instruments.

43 PARTICLE ACCELERATORS↗

Increasing the output power of single 808-nm laser diodes using diamond submounts produced by microwave plasma chemical vapour deposition

We have designed and fabricated submounts from synthetic diamond grown by microwave plasma chemical vapour deposition and developed an economical process for metallising such submounts. Laser diode chips having an 808-nm emission wavelength, 3-mm-long cavity and 130-mm-wide stripe contact were mounted on copper heat sinks with the use of diamond submounts differing in quality. The devices were tested for more than 150 h in continuous mode at an output power of 8 W on diamond with a thermal conductivity of 700 W m{sup -1} K{sup -1}, and no changes in their output power were detected. On diamond with a thermal conductivity of 1600 W m{sup -1} K{sup -1}, stable cw operation for 24 h at an output power of 12 W was demonstrated. (letters)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Wavelength-Agile External-Cavity Diode Laser for DWDM

A prototype external-cavity diode laser (ECDL) has been developed for communication systems utilizing dense wavelength- division multiplexing (DWDM). This ECDL is an updated version of the ECDL reported in Wavelength-Agile External- Cavity Diode Laser (LEW-17090), NASA Tech Briefs, Vol. 25, No. 11 (November 2001), page 14a. To recapitulate: The wavelength-agile ECDL combines the stability of an external-cavity laser with the wavelength agility of a diode laser. Wavelength is modulated by modulating the injection current of the diode-laser gain element. The external cavity is a Littman-Metcalf resonator, in which the zeroth-order output from a diffraction grating is used as the laser output and the first-order-diffracted light is retro-reflected by a cavity feedback mirror, which establishes one end of the resonator. The other end of the resonator is the output surface of a Fabry-Perot resonator that constitutes the diode-laser gain element. Wavelength is selected by choosing the angle of the diffracted return beam, as determined by position of the feedback mirror. The present wavelength-agile ECDL is distinguished by design details that enable coverage of all 60 channels, separated by 100-GHz frequency intervals, that are specified in DWDM standards.

Pilgrim, Jeffrey S.↗

Fast Offset Laser Phase-Locking System

Figure 1 shows a simplified block diagram of an improved optoelectronic system for locking the phase of one laser to that of another laser with an adjustable offset frequency specified by the user. In comparison with prior systems, this system exhibits higher performance (including higher stability) and is much easier to use. The system is based on a field-programmable gate array (FPGA) and operates almost entirely digitally; hence, it is easily adaptable to many different systems. The system achieves phase stability of less than a microcycle. It was developed to satisfy the phase-stability requirement for a planned spaceborne gravitational-wave-detecting heterodyne laser interferometer (LISA). The system has potential terrestrial utility in communications, lidar, and other applications. The present system includes a fast phasemeter that is a companion to the microcycle-accurate one described in High-Accuracy, High-Dynamic-Range Phase-Measurement System (NPO-41927), NASA Tech Briefs, Vol. 31, No. 6 (June 2007), page 22. In the present system (as in the previously reported one), beams from the two lasers (here denoted the master and slave lasers) interfere on a photodiode. The heterodyne photodiode output is digitized and fed to the fast phasemeter, which produces suitably conditioned, low-latency analog control signals which lock the phase of the slave laser to that of the master laser. These control signals are used to drive a thermal and a piezoelectric transducer that adjust the frequency and phase of the slave-laser output. The output of the photodiode is a heterodyne signal at the difference between the frequencies of the two lasers. (The difference is currently required to be less than 20 MHz due to the Nyquist limit of the current sampling rate. We foresee few problems in doubling this limit using current equipment.) Within the phasemeter, the photodiode-output signal is digitized to 15 bits at a sampling frequency of 40 MHz by use of the same analog-to-digital converter (ADC) as that of the previously reported phasemeter. The ADC output is passed to the FPGA, wherein the signal is demodulated using a digitally generated oscillator signal at the offset locking frequency specified by the user. The demodulated signal is low-pass filtered, decimated to a sample rate of 1 MHz, then filtered again. The decimated and filtered signal is converted to an analog output by a 1 MHz, 16-bit digital-to-analog converters. After a simple low-pass filter, these analog signals drive the thermal and piezoelectric transducers of the laser.

Shaddock, Daniel↗

Radiation phase locking in an array of globally coupled fibre lasers

A model of an array of globally coupled fibre lasers, with the same fraction of the total output beam returned to each laser, is considered. The basic element of the model is a single laser controlled by an external signal. The output power of each laser in the array is found as a function of small-signal gain and frequency detuning. The maximum efficiency of phase locking and minimum fraction of output radiation that is necessary to form a feedback are calculated as functions of the number of lasers in the array. It is shown that gain saturation increases the efficiency of coherent beam summation in arrays containing up to 20 lasers. (control of radiation parameters)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗