Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION MICROSCOPES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Gold nanoparticle formation in diamond-like carbon using two different methods: Gold ion implantation and co-deposition of gold and carbon

We describe work in which gold nanoparticles were formed in diamond-like carbon (DLC), thereby generating a Au-DLC nanocomposite. A high-quality, hydrogen-free DLC thin film was formed by filtered vacuum arc plasma deposition, into which gold nanoparticles were introduced using two different methods. The first method was gold ion implantation into the DLC film at a number of decreasing ion energies, distributing the gold over a controllable depth range within the DLC. The second method was co-deposition of gold and carbon, using two separate vacuum arc plasma guns with suitably interleaved repetitive pulsing. Transmission electron microscope images show that the size of the gold nanoparticles obtained by ion implantation is 3-5 nm. For the Au-DLC composite obtained by co-deposition, there were two different nanoparticle sizes, most about 2 nm with some 6-7 nm. Raman spectroscopy indicates that the implanted sample contains a smaller fraction of sp{sup 3} bonding for the DLC, demonstrating that some sp{sup 3} bonds are destroyed by the gold implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoimplantation and Purcell enhancement of single nitrogen-vacancy centers in photonic crystal cavities in diamond

We present the controlled creation of single nitrogen-vacancy (NV) centers via ion implantation at the center of a photonic crystal cavity which is fabricated in an ultrapure, single crystal diamond membrane. High-resolution placement of NV centers is achieved using collimation of a 5 keV-nitrogen ion beam through a pierced tip of an atomic force microscope. We demonstrate coupling of the implanted NV centers' broad band fluorescence to a cavity mode and observe Purcell enhancement of the spontaneous emission. The results are in good agreement with a master equation model for the cavity coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of the structural and chemical composition of two unique micro/nanostructures produced by femtosecond laser interactions on nickel

The structural and chemical composition of two unique microstructures formed on nickel, with nanoscale features, produced using femtosecond laser surface processing (FLSP) techniques is reported in this paper. These two surface morphologies, termed mounds and nanoparticle-covered pyramids, are part of a larger class of self-organized micro/nanostructured surfaces formed using FLSP. Cross-sections of the structures produced using focused ion beam milling techniques were analyzed with a transmission electron microscope. Both morphologies have a solid core with a layer of nanoparticles on the surface. Energy dispersive X-ray spectroscopy by scanning transmission electron microscopy studies reveal that the nanoparticles are a nickel oxide, while the core material is pure nickel.

36 MATERIALS SCIENCE↗

Experimental approach to neutron stars

The equation of state (EOS) of nuclear matter is of fundamental importance in many areas of nuclear physics and astrophysics In the laboratory, there are different means to study the nuclearmatter equation of state and its density dependence in particular: nuclear masses, neutron skins, pygmy resonance, and nuclear structure at the drip line give access to nuclear matter properties at densities lower than and at saturation density ρ0. Heavy ion reactions at energies above 0.1 AGeV are the only means to study nuclear matter at densities larger than normal nuclear matter density ρ0. In the beamenergy range of 0.1 to 2A GeV nuclear matter is compressed upto three times ρ0. Access to nuclear matter properties is achieved by simulating nuclear collisions by means of microscopic transport codes, or statistical or hydrodynamicalmodels. Characteristics of heavy-ion collisions are discussed, and experimental observables which allow to constrain nuclear matter properties by comparing experimental results with those of transport codes are presented. Special emphasis will be given to the density dependence of the symmetry energy which is the most relevant connection between neutron stars and heavy ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Combined Chemical and Topographic Imaging at Atmospheric Pressure via Microprobe Laser Desorption/Ionization Mass Spectrometry-Atomic Force Microscopy

The operational characteristics and imaging performance are described for a new instrument comprising an atomic force microscope (AFM) coupled with a pulsed laser and a linear ion trap mass spectrometer. The AFM operating mode is used to produce topographic surface images having nanometer-scale spatial and height resolution. Spatially resolved mass spectra of ions, produced from the same surface via microprobe-mode laser desorption/ionization at atmospheric pressure, are then used to create a 100 x 100 m chemical image. The effective spatial resolution of the image (~2 m) was constrained by the limit of detection (estimated to be 109 1010 ions) rather than by the diameter of the focused laser spot or the step size of the AFM sample stage. Thus, it is expected that improvements in imaging performance can be realized by implementation of post-ionization methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion Solid Interaction And Surface Modification At RF Breakdown In High-Gradient Linacs

Ion solid interactions have been shown to be an important new mechanism of unipolar arc formation in high-gradient rf linear accelerators through surface self-sputtering by plasma ions, in addition to an intense surface field evaporation. We believe a non-Debye plasma is formed in close vicinity to the surface and strongly affects surface atomic migration via intense bombardment by ions, strong electric field, and high surface temperature. Scanning electron microscope studies of copper surface of an rf cavity were conducted that show craters, arc pits, and both irregular and regular ripple structures with a characteristic length of 2 microns on the surface. Strong field enhancements are characteristic of the edges, corners, and crack systems at surfaces subjected to rf breakdown.

43 PARTICLE ACCELERATORS↗

Origin of periodic domain structure in Er{sup 3+}-doped beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystal lines patterned by laser irradiations in glasses

Er{sup 3+}-doped beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystal lines are patterned on the surface of Er{sub 2}O{sub 3}-Gd{sub 2}O{sub 3}-Sm{sub 2}O{sub 3}-MoO{sub 3}-B{sub 2}O{sub 3} glasses by continuous-wave Yb:YVO{sub 4} laser irradiations (wavelength: 1080 nm, power: 1.3 W, scanning speeds: 5 {mu}m/s), and the origin of the periodicity of self-organized domain structures with high and low refractive index regions in crystal lines is examined from polarized optical microscope (POM) observations, micro-Raman scattering spectrum, and photoluminescence spectrum measurements. It is found that the periodicity of domain structures changes largely depending on Er{sub 2}O{sub 3} content, i.e., the length of high (bright color in POM observations) and low (dark color) refractive index regions increases with increasing Er{sub 2}O{sub 3} content and homogeneous crystal lines with no periodic domain structures are patterned in Er{sub 2}O{sub 3}-Sm{sub 2}O{sub 3}-MoO{sub 3}-B{sub 2}O{sub 3} glass with no Gd{sub 2}O{sub 3}. Considering that the degree of ferroelasticities in beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystals decreases due to the incorporation of Er{sup 3+} ions, it is demonstrated that the origin of periodic domain structures in laser-patterned lines is due to spontaneous strains in ferroelastic beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystals. - Graphical abstract: This figure shows the polarized optical photographs (top view) for the lines patterned by laser irradiations with the power of P=1.3 W and the scanning speed of S=5 {mu}m/s in xEr{sub 2}O{sub 3}-(18.25-x)Gd{sub 2}O{sub 3}-3Sm{sub 2}O{sub 3}-63.75MoO{sub 3}-15B{sub 2}O{sub 3} (mol%) glasses. This figure indicates that the periodicity of domain structures in beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystal lines, i.e., the lengths of bright (high refractive index) and dark (low refractive index) color regions, changes depending on the amount of Er{sub 2}O{sub 3} addition. It is demonstrated that the origin of the periodicity of domain structures is due to spontaneous strains in ferroelastic beta'-(Sm,Gd){sub 2}(MoO{sub 4}){sub 3} crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of Precipitates in Si Implanted with {sup 64}Zn{sup +} and {sup 16}O{sup +} Ions

The results of studying the surface Si layer and precipitate formation in CZ n-Si(100) samples sequentially implanted with {sup 64}Zn{sup +} ions with a dose of 5 × 10{sup 16} cm{sup 2} and energy of 100 keV and {sup 16}O{sup +} ions with the same dose but an energy of 33 keV at room temperature so that their projection paths R{sub p} = 70 nm would coincide are presented. The post-implantation samples are annealed for 1 h in an inert Ar medium in the temperature range of 400–900°C with a step of 100°C. The profiles of the implanted impurities are studied by time-of-flight secondary ion mass spectrometry. The Si surface is visualized using a scanning electron microscope, while the near-surface layer is visualized with the help of maps of elements formed by Auger electron spectroscopy with profiling over depth. The ZnO(002) texture is formed in an amorphized Si layer after the implantation of Zn and O ions. ZnO(102) crystallites of 5 nm in size are found in a recrystallized single-crystalline Si layer after annealing in Ar at 700°C.

36 MATERIALS SCIENCE↗

Accelerated radiation tolerance testing of Ti-based MAX phases

MAX phases have recently attracted significant attention for potential nuclear applications due to their novel properties such as unique hexagonal-compact nanolayered crystal structure, high-machinability due to lower hardness levels compared to conventional ceramics, and high-chemical inertness. In order for MAX phases to be used in nuclear reactors, two aspects deserve detailed investigations: (i) their phase stability at high-temperatures and (ii) microstructural defect formation and recovery induced by energetic particle irradiation. To date, degradation mechanisms of MAX phases at high-temperatures and following irradiation are largely unexplored fields of research. This work focuses on the evaluation of two Ti-based MAX phases – Ti 2 AlC and Ti 3 SiC 2 – within the context of extreme environments. To accomplish this, a one-of-a-kind comparison between neutron irradiations, performed over a decade of research at the High Flux Isotope Reactor (HFIR), and heavy-ion irradiations, carried out in situ in a Transmission Electron Microscope (TEM) at the MIAMI-2 facility, has been conducted. The results show Ti-based MAX phases are prone to accelerated decomposition under the conditions investigated. This questions the hypothesis that MAX phases exhibit high phase stability, especially when used in future nuclear energy systems where energetic particle irradiation is a dominating degradation mechanism.

36 MATERIALS SCIENCE↗

Intrinsic ferromagnetic properties in Cr-doped ZnO diluted magnetic semiconductors

The Cr-doped zinc oxide (Zn{sub 1-x}Cr{sub x}O, 0{<=}x{<=}0.08) diluted magnetic semiconductors have been synthesized successfully by the sol-gel method. Investigations on magnetic, optical and structural properties of the produced samples have been done. Energy dispersive spectroscopy (EDS) shows the existence of Cr ion in the Cr-doped ZnO. The results of X-ray diffraction (XRD), the transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) indicate that the Cr ions are at least partially substitutionally incorporated into the crystal lattice of ZnO. The produced samples show good high-T{sub c} (Curie temperature) ferromagnetism (FM) in Cr-doped ZnO nanoparticles with Cr concentration of less than 5 at%. The results of photoluminescence (PL) further testify that FM is an intrinsic property of the Cr-doped ZnO nanoparticles. And the occurrence of FM should mainly contribute to the Cr doping. -- Graphical Abstract: As can be seen from the magnetic hysteresis loops of Zn{sub 1-x}Cr{sub x}O (x=0.01, 0.03, 0.05, and 0.08) at room temperature under 10 KOe, the samples show good high-T{sub c} ferromagnetism with Cr concentration of less than 5 at%. Display Omitted Highlights: {yields} Zn{sub 1-x}Cr{sub x}O(0{<=}x{<=}0.08) nanoparticles are successfully synthesized by sol-gel method. {yields} The Cr ions are substitutionally incorporated into the crystal lattice of ZnO. {yields} The Cr-doped ZnO nanoparticles show good high-T{sub c} ferromagnetism. {yields} The ferromagnetism is an intrinsic property of the Cr-doped ZnO nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low-voltage nanodomain writing in He-implanted lithium niobate crystals

A scanning force microscope tip is used to write ferroelectric domains in He-implanted single-crystal lithium niobate and subsequently probe them by piezoresponse force microscopy. Investigation of cross-sections of the samples showed that the buried implanted layer, approx1 mum below the surface, is nonferroelectric and can thus act as a barrier to domain growth. This barrier enabled stable surface domains of <1 mum size to be written in 500 mum thick crystal substrates with voltage pulses of only 10 V applied to the tip.

36 MATERIALS SCIENCE↗

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In this work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Observation of State of Charge Distributions in Lithium-ion Battery Electrodes

Current lithium-ion battery technology is gearing towards meeting the robust demand of power and energy requirements for all-electric transportation without compromising on the safety, performance, and cycle life. The state-of-charge (SOC) of a Li-ion cell can be a macroscopic indicator of the state-of-health of the battery. The microscopic origin of the SOC relates to the local lithium content in individual electrode particles and the effective ability of Li-ions to transport or shuttle between the redox couples through the cell geometric boundaries. Herein, micrometer-resolved Raman mapping of a transition-metal-based oxide positive electrode, Li{sub 1-x}(Ni{sub y}Co{sub z}Al{sub 1-y-z})O{sub 2}, maintained at different SOCs, is shown. An attempt has been made to link the underlying changes to the composition and structural integrity at the individual particle level. Furthermore, an SOC distribution at macroscopic length scale of the electrodes is presented.

25 ENERGY STORAGE↗

Direct fabrication of nanopores in a metal foil using focused ion beam with in situ measurements of the penetrating ion beam current

A through hole with a diameter less than 100 nm was fabricated in an Ag foil using only a focused ion beam (FIB) system and in situ measurements of the penetrating ion beam. During the drilling of the foil by a FIB of Ga{sup +} ions, the transmitted part of the beam was measured with an electrode mounted on the back face of the foil. When the beam current penetrating through the nanopore reached a certain value, irradiation was stopped and the area of the created aperture was measured with a scanning electron microscope. The resulting area was correlated with the current of the penetrating ion beam. This suggests that we can fabricate a nanopore of the desired size by controlling the ion beam via penetrating ion beam measurements. The smallest aperture thus created was circular with diameter of 30 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ion irradiation of ternary pyrochlore oxides.

Polycrystalline synthetic samples of Y{sub 2}Ti{sub 2-x}Sn{sub x}O{sub 7} with x = 0.4, 0.8, 1.2, and 1.6, together with Nd{sub 2}Zr{sub 2}O{sub 7}, Nd{sub 2}Zr{sub 1.2}Ti{sub 0.8}O{sub 7}, and La{sub 1.6}Y{sub 0.4}Hf{sub 2}O{sub 7}, were irradiated in situ in the intermediate voltage electron microscope (IVEM)-Tandem Facility at Argonne National Laboratory using 1.0 MeV Kr ions at temperatures of 50 to 650 K. Determination of the critical amorphization fluence (F{sub c}) as a function of temperature has revealed a dramatic increase in radiation tolerance with increasing Sn content on the pyrochlore B site. Nonlinear least-squares analysis of the fluence-temperature curves gave critical temperatures (T{sub c}) of 666 {+-} 4, 335 {+-} 12, and 251 {+-} 51 K for the Y{sub 2}Ti{sub 2-x}Sn{sub x}O{sub 7} samples with x = 0.4, 0.8, and 1.2, respectively. The sample with x = 1.6 appears to disorder to a defect fluorite structure at a fluence below 1.25 x 10{sup 15} ions cm{sup -2} and remains crystalline to 5 x 10{sup 15} ions cm{sup -2} at 50 K. Additionally, the critical fluence-temperature response curves were determined for Nd{sub 2}Zr{sub 1.2}Ti{sub 0.8}O{sub 7} and La{sub 1.6}Y{sub 0.4}Hf{sub 2}O{sub 7}, and we obtained T{sub c} values of 685 {+-} 53 K and 473 {+-} 52 K, respectively, for these pyrochlores. Nd{sub 2}Zr{sub 2}O{sub 7} did not become amorphous after a fluence of 2.5 x 10{sup 15} ions cm{sup -2} at 50 K, but there is evidence that it may amorphize at a higher fluence, with an estimated T{sub c} of 135 K. The observed T{sub c} results are discussed with respect to the predicted T{sub c} values based upon a previously published empirical model (Lumpkin, G. R.; Pruneda, M.; Rios, S.; Smith, K. L.; Trachenko, K.; Whittle, K. R.; Zaluzec, N. J. J. Solid State Chem. 2007, 180, 1512). In the Y{sub 2}Ti{sub 2-x}Sn{sub x}O{sub 7} pyrochlores, T{sub c} appears to be linear with respect to composition, and is linear with respect to r{sub A}/r{sub B} and x(48f) for all samples investigated herein.

36 MATERIALS SCIENCE↗

Radiation induced modification in nanoscale hardness of ZnO cone structures

In this paper, the effect of ion irradiation on nanoscale hardness of ZnO microcones is reported. The hardness of ZnO cones determined by nanoindentation using atomic force microscope initially increases from 4.7{+-}1.4 to 9.5{+-}1.6 GPa after irradiation with 1.2 MeV Ar{sup +8} ions at an ion fluence of 10{sup 15} ions cm{sup -2} and then decreases with increasing ion fluence. This change in mechanical hardness has been correlated with the residual stress of the sample revealed by Raman peak shift in the E{sub 2}(H) mode. These results show that the generally reported radiation-hard nature of ZnO depends critically on irradiation conditions, especially the irradiation temperature.

36 MATERIALS SCIENCE↗

Ion flow at comet Halley

The three-dimensional positive ion analyzer aboard the Giotto spacecraft has been used to study the interaction between protons and alpha-particles in the solar wind and positive ions from comet Halley. Although the first impression of the overall structure is that the plasma flow evolves smoothly as the nucleus is approached, three sharp transitions of relatively small amplitude can be identified on both the inbound and outbound legs of the trajectory. The outermost one, at about one million km from the nucleus, appears to be a multiple crossing of a weak bow shock. The innermost one, at 80,000 km, is the boundary where the flowing plasma becomes depleted. On a microscopic scale, the turbulence created by the interaction between the two ion populations extends to a distance of several million km from the nucleus. At Giotto's closest approach to the nucleus, the plasma produced around the spacecraft by dust and gas impacts was much more energetic than had been expected.

Johnstone, A.↗

An optical technique to measure ion engine grid distortion due to differential thermal expansion

This paper describes an optical technique developed for measuring small differential grid displacements due to thermal expansion of an ion thruster accelerator system. The technique is based on confocal scanning optical microscope type II. For the measurements of small displacements where there are distances on the order of a meter or more between the lens plane and the sample, some of the optical components are moved while the sample is kept fixed. The feasibility of applying this technique to measure the thermally induced ion thruster grid displacements was demonstrated in a bench-top simulation. It is noted that this technique can also provide information on grid movement resulting from thermal transients such as the start-up.

Trava-Airoldi, V. J.↗