Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INCLINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

The role of the Kozai-Lidov mechanism in black hole binary mergers in galactic centers

In order to understand the rate of merger of stellar mass black hole binaries (BHBs) by gravitational wave (GW) emission it is important to determine the major pathways to merger. We use numerical simulations to explore the evolution of BHBs inside the radius of influence of supermassive black holes (SMBHs) in galactic centers. In this region, the evolution of binaries is dominated by perturbations from the central SMBH. In particular, as first pointed out by Antonini and Perets, the Kozai–Lidov mechanism trades relative inclination of the BHB to the SMBH for eccentricity of the BHB, and for some orientations can bring the BHB to an eccentricity near unity. At very high eccentricities, GW emission from the BHB can become efficient, causing the members of the BHB to coalesce. We use a novel combination of two N-body codes to follow this evolution. We are required to simulate small systems to follow the behavior accurately. We have completed 400 simulations that range from ∼300 stars around a 10{sup 3} M{sub ⊙} black hole to ∼4500 stars around a 10{sup 4} M{sub ⊙} black hole. These simulations are the first to follow the internal orbit of a binary near an SMBH while also following the changes to its external orbit self-consistently. We find that this mechanism could produce mergers at a maximum rate per volume of ∼100 Gpc{sup −3} yr{sup −1} or considerably less if the inclination oscillations of the binary remain constant as the BHB inclination to the SMBH changes, or if the binary black hole fraction is small.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Dynamically Hot Super-Earths from Outer Giant Planet Scattering

The hundreds of multiple planetary systems discovered by the Kepler mission are typically observed to reside in close-in (≲0.5 AU), low-eccentricity, low-inclination orbits. We run N-body experiments to study the effect that unstable outer (≳1 AU) giant planets, whose end orbital configurations resemble those in the Radial Velocity population, have on these close-in multiple super-Earth systems. Our experiments show that the giant planets greatly reduce the multiplicity of the inner super-Earths, and the surviving population can have large eccentricities (e≳0.3) and inclinations (i≳20{sup ∘}) at levels that anti-correlate with multiplicity. Consequently, this model predicts the existence of a population of dynamically hot single-transiting planets with typical eccentricities and inclinations of ∼0.1–0.5 and ∼10°–40°. We show that these results can explain the following observations: (i) the recent eccentricity measurements of Kepler super-Earths from transit durations; (ii) the tentative observation that single-transiting systems have a wider distribution of stellar obliquity angles compared to the multiple-transiting systems; (iii) the architecture of some eccentric super-Earths discovered by Radial Velocity surveys such as HD 125612c. Future observations from TESS will reveal many more dynamically hot single transiting planets, for which follow up radial velocity studies will be able to test our models and see whether they have outer giant planets.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Giant-planet Influence on the Collective Gravity of a Primordial Scattered Disk

Axisymmetric disks of high-eccentricity, low-mass bodies on near-Keplerian orbits are unstable to an out-of-plane buckling. This “inclination instability” exponentially grows the orbital inclinations, raises perihelion distances, and clusters in the argument of perihelion. Here we examine the instability in a massive primordial scattered disk including the orbit-averaged gravitational influence of the giant planets. We show that differential apsidal precession induced by the giant planets will suppress the inclination instability unless the primordial mass is ≳20 Earth masses. We also show that the instability should produce a “perihelion gap” at semimajor axes of hundreds of astronomical units, as the orbits of the remnant population are more likely to have extremely large perihelion distances (O(100 au)) than intermediate values.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Mildly Hierarchical Triple Dynamics and Applications to the Outer Solar System

Three-body interactions are ubiquitous in astrophysics. For instance, Kozai–Lidov oscillations in hierarchical triple systems have been studied extensively and applied to a wide range of astrophysical systems. However, mildly hierarchical triples also play an important role, but they are less explored. In this work, we consider the secular dynamics of a test particle in a mildly hierarchical configuration. We find the limit within which the secular approximation is reliable when the outer perturber is in a circular orbit. In addition, we present resonances and chaotic regions using surface-of-section plots, and characterize regions of phase space that allow large eccentricity and inclination variations. Finally, we apply the secular results to the outer Solar System. We focus on the distribution of extreme trans-Neptunian objects (eTNOs) under the perturbation of a possible outer planet (Planet 9), and find that in addition to a low-inclination Planet 9, a polar or a counter-orbiting one could also produce pericenter clustering of eTNOs, while the polar one leads to a wider spread of eTNO inclinations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Long-period Jovian Tilts the Orbits of Two sub-Neptunes Relative to Stellar Spin Axis in Kepler-129

We present the discovery of Kepler-129 d (P{sub d}=7.2{sub -0.3}{sup +0.4} yr, msini{sub d}=8.3{sub -0.7}{sup +1.1} M{sub Jup}, e{sub d}=0.15{sub -0.05}{sup +0.07}) based on six years of radial-velocity observations from Keck/HIRES. Kepler-129 also hosts two transiting sub-Neptunes: Kepler-129 b (P {sub b} = 15.79 days, r {sub b} = 2.40 ± 0.04 R {sub ⊕}) and Kepler-129 c (P {sub c} = 82.20 days, r {sub c} = 2.52 ± 0.07 R {sub ⊕}) for which we measure masses of m {sub b} < 20 M {sub ⊕} and m{sub c}=43{sub -12}{sup +13} M{sub ⊕}. Kepler-129 is a hierarchical system consisting of two tightly packed inner planets and a massive external companion. In such a system, two inner planets precess around the orbital normal of the outer companion, causing their inclinations to oscillate with time. Based on an asteroseismic analysis of Kepler data, we find tentative evidence that Kepler-129 b and c are misaligned with stellar spin axis by ≳38°, which could be torqued by Kepler-129 d if it is inclined by ≳19° relative to inner planets. Using N-body simulations, we provide additional constraints on the mutual inclination between Kepler-129 d and inner planets by estimating the fraction of time during which two inner planets both transit. The probability that two planets both transit decreases as their misalignment with Kepler-129 d increases. We also find a more massive Kepler-129 c enables the two inner planets to become strongly coupled and more resistant to perturbations from Kepler-129 d. The unusually high mass of Kepler-129 c provides a valuable benchmark for both planetary dynamics and interior structure, since the best-fit mass is consistent with this 2.5 R {sub ⊕} planet having a rocky surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

X-ray/GeV emissions from Crab-like pulsars in the lMC

We discuss X-ray and gamma-ray emissions from Crab-like pulsars, PSRs J0537-6910 and J0540-6919, in the Large Magellanic Cloud. Fermi-LAT observations have resolved the gamma-ray emissions from these two pulsars and found pulsed emissions from PSR J0540-6919. The total pulsed radiation in the X-ray/gamma-ray energy bands of PSR J0540-6919 is observed with efficiency η{sub J0540}∼0.06 (in 4π sr), which is about a factor of ten larger than η{sub Crab}∼0.006 of the Crab pulsar. Although PSR J0537-6910 has the highest spin-down power among currently known pulsars, the efficiency of the observed X-ray emissions is about two orders of magnitude smaller than that of PSR J0540-6919. This paper mainly discusses what causes the difference in the radiation efficiencies of these three energetic Crab-like pulsars. We discuss electron/positron acceleration and high-energy emission processes within the outer gap model. By solving the outer gap structure with the dipole magnetic field, we show that the radiation efficiency decreases as the inclination angle between the magnetic axis and the rotation axis increases. To explain the difference in the pulse profile and in the radiation efficiency, our model suggests that PSR J0540-6919 has an inclination angle much smaller than that of the Crab pulsar (here we assume the inclination angles of both pulsars are α<90{sup ∘}). On the other hand, we speculate that the difference in the radiation efficiencies between PSRs J0537-6910 and J0549-6919 is mainly caused by the difference in the Earth viewing angle, and that we see PSR J0537-6910 with an Earth viewing angle ζ≫90{sup ∘} (or ≪90{sup ∘}) measured from the spin axis, while we see PSR J0540-6919 with ζ∼90{sup ∘}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

On the Existence of Regular and Irregular Outer Moons Orbiting the Pluto–Charon System

The dwarf planet Pluto is known to host an extended system of five co-planar satellites. Previous studies have explored the formation and evolution of the system in isolation, neglecting perturbative effects by the Sun. Here we show that secular evolution due to the Sun can strongly affect the evolution of outer satellites and rings in the system, if such exist. Although precession due to extended gravitational potential from the inner Pluto–Charon binary quench such secular evolution up to a {sub crit} ∼ 0.0035 au (∼0.09 R {sub Hill} the Hill radius; including all of the currently known satellites), outer orbits can be significantly altered. In particular, we find that co-planar rings and satellites should not exist beyond a {sub crit}; rather, satellites and dust particles in these regions secularly evolve on timescales ranging between 10{sup 4} and 10{sup 6} years, and quasi-periodically change their inclinations and eccentricities through secular evolution (Lidov–Kozai oscillations). Such oscillations can lead to high inclinations and eccentricities, constraining the range where such satellites (and dust particles) can exist without crossing the orbits of the inner satellites or crossing the outer Hill stability range. Outer satellites, if such exist are therefore likely to be irregular satellites, with orbits limited to be non-circular and/or highly inclined. Current observations, including the recent data from the New-Horizons mission explored only inner regions (<0.0012 au) and excluded the existence of additional satellites; however, the irregular satellites discussed here should reside farther, in the yet uncharted regions around Pluto.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

The TWA 3 Young Triple System: Orbits, Disks, Evolution

We have characterized the spectroscopic orbit of the TWA 3A binary and provide preliminary families of probable solutions for the TWA 3A visual orbit, as well as for the wide TWA 3A–B orbit. TWA 3 is a hierarchical triple located at 34 pc in the ∼10 Myr old TW Hya association. The wide component separation is 1.″55; the close pair was first identified as a possible binary almost 20 years ago. We initially identified the 35-day period orbital solution using high-resolution infrared spectroscopy that angularly resolved the A and B components. We then refined the preliminary orbit by combining the infrared data with a reanalysis of our high-resolution optical spectroscopy. The orbital period from the combined spectroscopic solution is ∼35 days, the eccentricity is ∼0.63, and the mass ratio is ∼0.84; although this high mass ratio would suggest that optical spectroscopy alone should be sufficient to identify the orbital solution, the presence of the tertiary B component likely introduced confusion in the blended optical spectra. Using millimeter imaging from the literature, we also estimate the inclinations of the stellar orbital planes with respect to the TWA 3A circumbinary disk inclination and find that all three planes are likely misaligned by at least ∼30°. The TWA 3A spectroscopic binary components have spectral types of M4.0 and M4.5; TWA 3B is an M3. We speculate that the system formed as a triple, is bound, and that its properties were shaped by dynamical interactions between the inclined orbits and disk.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Origin and Evolution of Short-period Comets

Comets are icy objects that orbitally evolve from the trans-Neptunian region into the inner solar system, where they are heated by solar radiation and become active due to the sublimation of water ice. Here we perform simulations in which cometary reservoirs are formed in the early solar system and evolved over 4.5 Gyr. The gravitational effects of Planet 9 (P9) are included in some simulations. Different models are considered for comets to be active, including a simple assumption that comets remain active for N{sub p}(q) perihelion passages with perihelion distance q<2.5 au. The orbital distribution and number of active comets produced in our model is compared to observations. The orbital distribution of ecliptic comets (ECs) is well reproduced in models with N{sub p}(2.5)≃500 and without P9. With P9, the inclination distribution of model ECs is wider than the observed one. We find that the known Halley-type comets (HTCs) have a nearly isotropic inclination distribution. The HTCs appear to be an extension of the population of returning Oort-cloud comets (OCCs) to shorter orbital periods. The inclination distribution of model HTCs becomes broader with increasing N{sub p}, but the existing data are not good enough to constrain N{sub p} from orbital fits. N{sub p}(2.5)>1000 is required to obtain a steady-state population of large active HTCs that is consistent with observations. To fit the ratio of the returning-to-new OCCs, by contrast, our model implies that N{sub p}(2.5)≲10, possibly because the detected long-period comets are smaller and much easier to disrupt than observed HTCs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Upper Limits on Gravitational Waves from Scorpius X-1 from a Model-based Cross-correlation Search in Advanced LIGO Data

We present the results of a semicoherent search for continuous gravitational waves from the low-mass X-ray binary Scorpius X-1, using data from the first Advanced LIGO observing run. The search method uses details of the modeled, parametrized continuous signal to combine coherently data separated by less than a specified coherence time, which can be adjusted to trade off sensitivity against computational cost. A search was conducted over the frequency range 25–2000 Hz, spanning the current observationally constrained range of binary orbital parameters. No significant detection candidates were found, and frequency-dependent upper limits were set using a combination of sensitivity estimates and simulated signal injections. The most stringent upper limit was set at 175 Hz, with comparable limits set across the most sensitive frequency range from 100 to 200 Hz. At this frequency, the 95% upper limit on the signal amplitude h {sub 0} is 2.3×10{sup −25} marginalized over the unknown inclination angle of the neutron star’s spin, and 8.0×10{sup −26} assuming the best orientation (which results in circularly polarized gravitational waves). These limits are a factor of 3–4 stronger than those set by other analyses of the same data, and a factor of ∼7 stronger than the best upper limits set using data from Initial LIGO science runs. In the vicinity of 100 Hz, the limits are a factor of between 1.2 and 3.5 above the predictions of the torque balance model, depending on the inclination angle; if the most likely inclination angle of 44° is assumed, they are within a factor of 1.7.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

A multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs: Original Research Article: A multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs

This paper applies a multiscale hydro-geochemical-mechanical approach to analyze faulted CO 2 reservoirs using the STOMP-CO 2 -R code that is coupled to the ABAQUS® finite element package. STOMP-CO 2 -R models the reactive transport of CO 2 causing mineral volume fraction changes that are captured by an Eshelby-Mori-Tanka model implemented in ABAQUS®. A three-dimensional (3D) STOMP-CO 2 -R model for a reservoir containing an inclined fault was built to analyze a formation containing a reaction network with 5 minerals: albite, anorthite, calcite, kaolinite and quartz. A 3D finite element mesh that exactly maps the STOMP-CO 2 -R grid is developed for coupled hydro-geochemical-mechanical analyses. The model contains alternating sandstone and shale layers. The impact of reactive transport of CO 2 on the geomechanical properties of reservoir rocks and seals are studied in terms of mineral composition changes that affect their geomechanical responses. Simulations assuming extensional and compressional stress regimes with and without coupled geochemistry are performed to study the stress regime effect on the risk of hydraulic fracture. The tendency for the fault to slip is examined in terms of stress regime, geomechanical and geochemical-mechanical effects as well as fault inclination. The results show that mineralogical changes due to long-term injection of CO 2 reduce the permeability and elastic modulus of the reservoir, leading to increased risk of hydraulic fracture in the injection location and at the caprock seal immediately above the injection zone. Fault slip is not predicted to occur. However, fault inclination and stress regime have an important impact on the slip tendency factor.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Role of grain boundary crystallography on void growth in FCC metals

The growth of an isolated spherical void at and near a grain boundary or a triple junction is studied by means of full-field crystal plasticity simulations with explicit representation of the void. To examine the fundamental aspects of void/grain boundary interactions in these cases, a three-dimensional large-strain elasto-viscoplastic fast-Fourier transform (LS-EVP-FFT) model with axisymmetric tensile periodic boundary conditions was developed. We employ this model to reveal the role of crystallography (grain orientations, grain boundary misorientation and inclination angle with respect to the largest component of the applied stress) and type of loading on void growth. It was found that grain orientation was the primary crystallographic feature governing void growth in strain-rate controlled simulations. For strains small enough to not significantly alter the local geometry, the overall growth of the void in bicrystal boundaries was not strongly affected by grain boundary inclination angle. The relative amount of void growth experienced within each grain in a bicrystal or tri-crystal was strongly dependent on the grain boundary inclination angle. We found a subset of orientations that exhibit faster void growth in bicrystal boundaries than inside the constituent single crystals. Last, we show that when placed primarily in one grain but near the grain boundary, void growth was similar to void growth when placed at the grain boundary. Furthermore, the growing void remained in the original grain and did not grow into the other grain, regardless of crystallographic character.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Enhancement of the photocatalytic property of TiO{sub 2} columnar nanostructured films by changing deposition angle

Highlights: • Isolated and inclined columnar TiO{sub 2} nanostructures were obtained by sputtering Ti, and subsequently annealing. • The film performed photocatalytic decolorization effectively under UV irradiation. • The photocatalytic efficiency increased with deposition angle, which results in a more porous micro structure of the films. - Abstract: Isolated and inclined columnar nanostructured TiO{sub 2} films were obtained by sputtering titanium with glancing angle deposition method and subsequently annealing in air. Compared with flat film, TiO{sub 2} film fabricated with this method has higher porosity; compared with TiO{sub 2} powder, it overcomes the obstacles of immobilization and recycling. The TiO{sub 2} photocatalysis was evaluated by the degradation of methyl orange under UV light. It was indicated that the photocatalytic performance increased with deposition angle, which changed the porosity of the films. The relationship between deposition angle (the angle between the target and substrate surface) and the TiO{sub 2} columnar inclination angle (the angle between TiO{sub 2} columnar and substrate normal) was discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Deformation behavior of nanoscale Al–Al 2 Cu eutectics studied by in situ micropillar compression

We report deformation behavior of nanoscale laser processed Al–Al 2 Cu eutectics at room temperature is characterized through in situ micro-pillar compression testing in a scanning transmission microscope. Interlamellar spacing of Al–Al 2 Cu eutectics varies from hundreds of nanometers to 20 nm. Three different sizes of micro-pillars are fabricated in order to study the deformation behaviors of single colony and multiple colonies, corresponding to the single crystal and polycrystal respectively. For single colonies, lamellar orientations parallel, normal or inclined to the loading direction were tested. The main findings are: 1) the plasticity mechanisms strongly depend on loading orientation: buckling and kinking in the parallel-loaded eutectics, planar sliding along Al–Al 2 Cu lamellar interfaces in the incline-loaded eutectics and localized shearing in the normal-loaded eutectics. 2) the incline-loaded eutectics exhibits the lowest compression flow strength, and the normal-loaded eutectics has the highest compression flow strength. 3) with decreasing inter-lamellar spacing, the strength increases and plasticity is uniformly distributed, as opposed to shear localization. Highest compressive plasticity is observed in polycrystalline eutectics with an ensemble of lamellar orientations with ~20 nm average spacing: 17.9% at flow stress of 1.63 GPa, and degenerate, bimodal morphology: 11.1% at flow stress of 1.36 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Radiation shielding analysis of the small-angle X-ray scattering flight tube end station of APS upgrade project

The CSSI beamline of the APSU will have a 20.5 m long, 2.75 m diameter SS end station designed to accept pink beam. In this work, the radiation shielding analysis of this end station is analyzed using STAC8 and FLUKA codes. Effect of mirror properties such as reflectivity, coating, inclination and roughness as well as variation in the steel composition are also studied. 8 mm thick SS is found to be adequate if the source is defined by a pinhole and the white beam is reflected with two mirrors inclined at 3.0 mradian or more. The dose rates from monochromatic beams are found to be below the desired levels when the XOP calculated bandwidth (BW) are used while the use of a flat 0.1% BW requires the mirror inclinations to be above 2.5 mradian or more. STAC8 results are consistently higher than the FLUKA results by about 1.5–2.0 times.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Photoacoustic 3-D imaging of polycrystalline microstructure improved with transverse acoustic waves

Non-invasive fast imaging of grain microstructure of polycrystalline ceria with sub-micrometric spatial resolution is performed via time-domain Brillouin scattering. The propagation of a nanoacoustic pulse is monitored down to 8 µm deep in a 30 × 30 µm2 area. Grains boundaries are reconstructed in three-dimensions via a twostep processing method, relying on the wavelet synchro-squeezed transform and the alpha shape algorithm. Imaging contrast is improved by taking advantage of stronger sensitivity to anisotropy of transverse acoustic waves, compared with longitudinal waves. Utilization of transverse waves in the image processing reveals additional boundaries that are not discerned using longitudinal waves, confirmed by an electron backscattering diffraction pattern. A buried inclined interface between differently oriented grains is identified by monitoring changes in amplitude (phase) of the portion of the signal associated with transverse (longitudinal) waves. Estimates of the inclination angle of this interface prove the sensitivity of our laser ultrasonic method to image inclined boundaries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Flow and Arching of Biomass Particles in Wedge-Shaped Hoppers

Poor understanding of the flow behavior of granular biomass material poses great challenges for the bioenergy industry, as the equipment functioning time is significantly reduced by handling issues like screw feeder clogging and hopper arching. In this work, the flow behavior of loblolly pine chips, including the mass flow rate and the critical outlet width, in a wedge-shaped hopper is investigated by combining physical experiments and numerical simulations. Comprehensive characterization of the flow response affected by the two material attributes (initial packing, particle density) and the three operational parameters (hopper outlet width, hopper inclination, and surcharge) is conducted. The results show that the hopper outlet width linearly controls the mass flow rate while the hopper inclination angle controls the critical outlet size. The packing determines whether the flow is smooth or surging, and the surcharge-induced compaction creates flow impedance. The magnitude of these influences varies from a slender hopper with a low inclination angle to a flat-bottom silo. These findings provide guidance for hopper operation in the material handling industry and shed light on the construction of a novel design method for material handling equipment in biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2023

Neutron star mass estimates from gamma-ray eclipses in spider millisecond pulsar binaries

Reliable neutron star mass measurements are key to determining the equation of state of cold nuclear matter, but such measurements are rare. Black widows and redbacks are compact binaries consisting of millisecond pulsars and semi-degenerate companion stars. Spectroscopy of the optically bright companions can determine their radial velocities, providing inclination-dependent pulsar mass estimates. Although inclinations can be inferred from subtle features in optical light curves, such estimates may be systematically biased due to incomplete heating models and poorly understood variability. Using data from the Fermi Large Area Telescope, we have searched for gamma-ray eclipses from 49 spider systems, discovering significant eclipses in 7 systems, including the prototypical black widow PSR B1957+20. Gamma-ray eclipses require direct occultation of the pulsar by the companion, and so the detection, or significant exclusion, of a gamma-ray eclipse strictly limits the binary inclination angle, providing new robust, model-independent pulsar mass constraints. For PSR B1957+20, the eclipse implies a much lighter pulsar (1.81 ± 0.07 solar masses) than inferred from optical light curve modelling.

79 ASTRONOMY AND ASTROPHYSICS↗