DE-SC0006345 Final Technical Report: Development of a Superconducting RF 500 MHz QWR for Synchrotron Light Sources
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
For optimization and accurate prediction of the amount of H-ion production in negative ion sources, analysis of electron energy distribution function (EEDF) is necessary. We are developing a numerical code which analyzes EEDF in the tandem-type arc-discharge source. It is a three-dimensional Monte Carlo simulation code with realistic geometry and magnetic configuration. Coulomb collision between electrons is treated with the ''binary collision'' model and collisions with hydrogen species are treated with the ''null-collision'' method. We applied this code to the analysis of the JAEA 10 A negative ion source. The numerical result shows that the obtained EEDF is in good agreement with experimental results.
We describe the infrared properties of sources detected over {approx}36 deg{sup 2} of sky in the GAMA 15 hr equatorial field, using data from both the Herschel Astrophysical Terahertz Large-Area Survey (H-ATLAS) and Wide-field Infrared Survey (WISE). With 5{sigma} point-source depths of 34 and 0.048 mJy at 250 {mu}m and 3.4 {mu}m, respectively, we are able to identify 50.6% of the H-ATLAS sources in the WISE survey, corresponding to a surface density of {approx}630 deg{sup -2}. Approximately two-thirds of these sources have measured spectroscopic or optical/near-IR photometric redshifts of z < 1. For sources with spectroscopic redshifts at z < 0.3, we find a linear correlation between the infrared luminosity at 3.4 {mu}m and that at 250 {mu}m, with {+-}50% scatter over {approx}1.5 orders of magnitude in luminosity, {approx}10{sup 9}-10{sup 10.5} L{sub Sun }. By contrast, the matched sources without previously measured redshifts (r {approx}> 20.5) have 250-350 {mu}m flux density ratios which suggest either high-redshift galaxies (z {approx}> 1.5) or optically faint low-redshift galaxies with unusually low temperatures (T {approx}< 20). Their small 3.4-250 {mu}m flux ratios favor a high-redshift galaxy population, as only the most actively star-forming galaxies at low redshift (e.g., Arp 220) exhibit comparable flux density ratios. Furthermore, we find a relatively large active galactic nucleus fraction ({approx}30%) in a 12 {mu}m flux-limited subsample of H-ATLAS sources, also consistent with there being a significant population of high-redshift sources in the no-redshift sample.
High quality Al{sub 2}O{sub 3} film grown by atomic layer deposition (ALD), with ozone (O{sub 3}) as oxygen source, is demonstrated for fabrication of normally-off AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistors (MIS-HEMTs). Significant suppression of Al–O–H and Al–Al bonds in ALD-Al{sub 2}O{sub 3} has been realized by substituting conventional H{sub 2}O source with O{sub 3}. A high dielectric breakdown E-field of 8.5 MV/cm and good TDDB behavior are achieved in a gate dielectric stack consisting of 13-nm O{sub 3}-Al{sub 2}O{sub 3} and 2-nm H{sub 2}O-Al{sub 2}O{sub 3} interfacial layer on recessed GaN. By using this 15-nm gate dielectric and a high-temperature gate-recess technique, the density of positive bulk/interface charges in normally-off AlGaN/GaN MIS-HEMTs is remarkably suppressed to as low as 0.9 × 10{sup 12 }cm{sup −2}, contributing to the realization of normally-off operation with a high threshold voltage of +1.6 V and a low specific ON-resistance R{sub ON,sp} of 0.49 mΩ cm{sup 2}.
Observations of the carbon-bearing molecules CO, HCN, CS, HNC, CN, and HCO{sup +} have been conducted toward the circumstellar envelope of the oxygen-rich red supergiant star, VY Canis Majoris (VY CMa), using the Arizona Radio Observatory (ARO). CO and HCN were also observed toward the O-rich shells of NML Cyg, TX Cam, IK Tau, and W Hya. Rotational transitions of these species at 1 mm, 0.8 mm, and 0.4 mm were measured with the ARO Submillimeter Telescope, including the J = 6 {yields} 5 line of CO at 691 GHz toward TX Cam and W Hya. The ARO 12 m was used for 2 mm and 3 mm observations. Four transitions were observed for HCO{sup +} in VY CMa, the first definitive identification of this ion in a circumstellar envelope. Molecular line profiles from VY CMa are complex, indicating three separate outflows: a roughly spherical flow and separate red- and blueshifted winds, as suggested by earlier observations. Spectra from the other sources appear to trace a single outflow component. The line data were modeled with a radiative transfer code to establish molecular abundances relative to H{sub 2} and source distributions. Abundances for CO derived for these objects vary over an order of magnitude, f {approx} 0.4-5 x 10{sup -4}, with the lower values corresponding to the supergiants. For HCN, a similar range in abundance is found (f {approx} 0.9-9 x 10{sup -6}), with no obvious dependence on the mass-loss rate. In VY CMa, HCO{sup +} is present in all three outflows with f {approx} 0.4-1.6 x 10{sup -8} and a spatial extent similar to that of CO. HNC is found only in the red- and blueshifted components with [HCN]/[HNC] {approx} 150-190, while [CN]/[HCN] {approx} 0.01 in the spherical flow. All three velocity components are traced in CS, which has a confined spatial distribution and f {approx} 2-6 x 10{sup -7}. These observations suggest that carbon-bearing molecules in O-rich shells are produced by a combination of photospheric shocks and photochemistry. Shocks may play a more prominent role in the supergiants because of their macroturbulent velocities.
A new ion source region has been constructed and attached to a variable temperature selected ion flow tube. The source features the capabilities of electron impact, chemical ionization, a solids probe, and electrospray ionization. The performance of the instrument is demonstrated through a series of reactions from ions created in each of the new source regions. The chemical ionization source is able to create H{sub 3}O{sup +}, but not as efficiently as similar sources with larger apertures. The ability of this source to support a solids probe, however, greatly expands our capabilities. A variety of rhenium cations and dications are created from the solids probe in sufficient abundance to study in the flow tube. The reaction of Re{sup +} with O{sub 2} proceeds with a rate constant that agrees with the literature measurements, while the reaction of Re{sub 2}{sup 2+} is found to charge transfer with O{sub 2} at about 60% of the collision rate; we have also performed calculations that support the charge transfer pathway. The electrospray source is used to create Ba{sup +}, which is reacted with N{sub 2}O to create BaO{sup +}, and we find a rate constant that agrees with the literature.
Using the Submillimeter Array (SMA) and Karl G. Jansky Very Large Array, we have imaged the massive protocluster NGC 6334 I(N) at high angular resolution (0.''5 ∼ 650 AU) from 6 cm to 0.87 mm, detecting 18 new compact continuum sources. Three of the new sources are coincident with previously identified H{sub 2}O masers. Together with the previously known sources, these data bring the number of likely protocluster members to 25 for a protostellar density of ∼700 pc{sup –3}. Our preliminary measurement of the Q-parameter of the minimum spanning tree is 0.82—close to the value for a uniform volume distribution. All of the (nine) sources with detections at multiple frequencies have spectral energy distributions consistent with dust emission, and two (SMA 1b and SMA 4) also have long wavelength emission consistent with a central hypercompact H II region. Thermal spectral line emission, including CH{sub 3}CN, is detected in six sources: LTE model fitting of CH{sub 3}CN (J = 12-11) yields temperatures of 72-373 K, confirming the presence of multiple hot cores. The fitted LSR velocities range from –3.3 to –7.0 km s{sup –1}, with an unbiased mean square deviation of 2.05 km s{sup –1}, implying a protocluster dynamical mass of 410 ± 260 M {sub ☉}. From analysis of a wide range of hot core molecules, the kinematics of SMA 1b are consistent with a rotating, infalling Keplerian disk of diameter 800 AU and enclosed mass of 10-30 M {sub ☉} that is perpendicular (within 1°) to the large-scale bipolar outflow axis. A companion to SMA 1b at a projected separation of 0.''45 (590 AU; SMA 1d), which shows no evidence of spectral line emission, is also confirmed. Finally, we detect one 218.4400 GHz and several 229.7588 GHz Class-I CH{sub 3}OH masers.
Electrofuels from renewable H 2 and waste CO 2 streams are of increasing interest because of their CO 2 emissions reduction potentials compared to fossil counterparts. This study evaluated the well-to-wheel (WTW) greenhouse gas (GHG) emissions of Fischer-Tropsch (FT) fuels from various electrolytic H 2 pathways and CO 2 sources, using various process designs (i.e., with and without H 2 recycle) and system boundaries. Two systems with different boundaries were considered: a stand-alone plant (with CO 2 from any source) and an integrated plant with corn ethanol production (supplying CO 2 ). The FT fuel synthesis process was modeled using Aspen Plus, which showed that 45% of the carbon in CO 2 can be fixed in the FT fuel, with a fuel production energy efficiency of 58%. Using nuclear or solar/wind electricity, the stand-alone FT fuel production from various plant designs can reduce WTW GHG emissions by 90-108%, relative to petroleum fuels. When integrating the FT fuel production process with corn ethanol production, the WTW GHG emissions of FT fuels are 57-65% lower compared to petroleum counterparts. This study highlights the sensitivity of the carbon intensity of FT fuels to the system boundary selection (i.e., stand-alone vs integrated), which has different implications under various GHG emission credit frameworks.
We report multi-frequency Very Large Array observations of three massive star formation regions (MSFRs) containing radio continuum components that were identified as broad radio recombination line (RRL) sources and hypercompact (HC) H II region candidates in our previous H92{alpha} and H76{alpha} study: G10.96+0.01 (component W), G28.20-0.04 (N), and G34.26+0.15 (B). An additional HC H II region candidate, G45.07+0.13, known to have broad H66{alpha} and H76{alpha} lines, small size, high electron density, and emission measure, was also included. We observed with high spatial resolution (0.''9-2.''3) the H53{alpha}, H66{alpha}, H76{alpha}, and H92{alpha} RRLs and the radio continuum at the corresponding wavelengths (0.7-3.6 cm). The motivation for these observations was to obtain RRLs over a range of principal quantum states to look for signatures of pressure broadening and macroscopic velocity structure. We find that pressure broadening contributes significantly to the linewidths, but it is not the sole cause of the broad lines. We compare radio continuum and dust emission distributions and find a good correspondence. We also discuss maser emission and multi-wavelength observations reported in the literature for these MSFRs.
Some reddened quasars appear to be transitional objects in the paradigm of merger-induced black hole growth/galaxy evolution, where a heavily obscured nucleus starts to be unveiled by powerful quasar winds evacuating the surrounding cocoon of dust and gas. Hard X-ray observations are able to peer through this gas and dust, revealing the properties of circumnuclear obscuration. Here, we present NuSTAR and XMM-Newton/Chandra observations of FIRST-2MASS-selected red quasars F2M 0830+3759 and F2M 1227+3214. We find that though F2M 0830+3759 is moderately obscured (N{sub H,Z} = (2.1 ± 0.2) × 10{sup 22} cm{sup −2}) and F2M 1227+3214 is mildly absorbed (N{sub H,Z}=3.4{sub −0.7}{sup +0.8}×10{sup 21} cm{sup −2}) along the line of sight, heavier global obscuration may be present in both sources, with N{sub H,S}=3.7{sub −2.6}{sup +4.1}×10{sup 23} cm{sup −2} and <5.5 × 10{sup 23} cm{sup −2} for F2M 0830+3759 and F2M 1227+3214, respectively. F2M 0830+3759 also has an excess of soft X-ray emission below 1 keV, which is well accommodated by a model where 7% of the intrinsic X-ray emission from the active galactic nucleus (AGN) is scattered into the line of sight. While F2M 1227+3214 has a dust-to-gas ratio (E(B – V)/N{sub H}) consistent with the Galactic value, the value of E(B – V)/N{sub H} for F2M 0830+3759 is lower than the Galactic standard, consistent with the paradigm that the dust resides on galactic scales while the X-ray reprocessing gas originates within the dust sublimation zone of the broad-line region. The X-ray and 6.1 μm luminosities of these red quasars are consistent with the empirical relations derived for high-luminosity, unobscured quasars, extending the parameter space of obscured AGNs previously observed by NuSTAR to higher luminosities.
We present near-infrared polarimetric results for the N159/N160 star-forming complex in the Large Magellanic Cloud with SIRPOL, the polarimeter of the Infrared Survey Facility. We separated foreground sources using their visual extinction derived from near-infrared photometric data. The 45 young stellar candidates and 2 high-excitation blobs were matched with our sources, and 12 of them showed high polarization that did not originate from the interstellar dust. We made a polarimetric catalog of 252, 277, and 89 sources at the J, H, and K {sub s} bands, respectively. Based on the ratios of the polarization degree between these bands, we verify that the origin of these polarized sources is the dichroic extinction from the interstellar dust aligned by the magnetic field and that the ratios follow a power-law dependence of P{sub λ} ∼ λ{sup −0.9}. The linear polarization vectors projected onto the Hα image of the complex turned out to follow the local magnetic field structure. The vector map overlaid on dust and gas emissions shows the close correlation between the magnetic field structure and surrounding interstellar medium. We suggest that the derived magnetic field structure supports the sequential formation scenario of the complex.
Purpose: To develop and test population-based machine learning algorithms for delineating high-dose clinical target volumes (CTVs) in H&N tumors. Automating and standardizing the contouring of CTVs can reduce both physician contouring time and inter-physician variability, which is one of the largest sources of uncertainty in H&N radiotherapy. Methods: Twenty-five node-negative patients treated with definitive radiotherapy were selected (6 right base of tongue, 11 left and 9 right tonsil). All patients had GTV and CTVs manually contoured by an experienced radiation oncologist prior to treatment. This contouring process, which is driven by anatomical, pathological, and patient specific information, typically results in non-uniform margin expansions about the GTV. Therefore, we tested two methods to delineate high-dose CTV given a manually-contoured GTV: (1) regression-support vector machines(SVM) and (2) classification-SVM. These models were trained and tested on each patient group using leave-one-out cross-validation. The volume difference(VD) and Dice similarity coefficient(DSC) between the manual and auto-contoured CTV were calculated to evaluate the results. Distances from GTV-to-CTV were computed about each patient’s GTV and these distances, in addition to distances from GTV to surrounding anatomy in the expansion direction, were utilized in the regression-SVM method. The classification-SVM method used categorical voxel-information (GTV, selected anatomical structures, else) from a 3×3×3cm3 ROI centered about the voxel to classify voxels as CTV. Results: Volumes for the auto-contoured CTVs ranged from 17.1 to 149.1cc and 17.4 to 151.9cc; the average(range) VD between manual and auto-contoured CTV were 0.93 (0.48–1.59) and 1.16(0.48–1.97); while average(range) DSC values were 0.75(0.59–0.88) and 0.74(0.59–0.81) for the regression-SVM and classification-SVM methods, respectively. Conclusion: We developed two novel machine learning methods to delineate high-dose CTV for H&N patients. Both methods showed promising results that hint to a solution to the standardization of the contouring process of clinical target volumes. Varian Medical Systems grant.
For optimization and accurate prediction of the amount of H{sup -} ion production in negative ion sources, analysis of electron energy distribution function (EEDF) is necessary. We are developing a numerical code which analyzes EEDF in tandem-type arc-discharge sources. It is a three-dimensional Monte Carlo simulation code with the realistic geometry and magnetic configuration. Coulomb collision between electrons is treated with 'Binary Collision' model and collisions with hydrogen species are treated with 'Null-collision (NC)' method. We have applied this code to the analysis of the JAEA 10 ampere negative ion source. The numerical result shows that the obtained EEDFs reasonably agree with experimental results.
We present a study of H II regions in M51 using the Hubble Space Telescope Advanced Camera for Surveys images taken as part of the Hubble Heritage Program. We have cataloged about 19,600 H II regions in M51 with H{alpha} luminosity in the range of L = 10{sup 35.5}-10{sup 39.0} erg s{sup -1}. The H{alpha} luminosity function of H II regions (H II LF) in M51 is well represented by a double power law with its index {alpha} = -2.25 {+-} 0.02 for the bright part and {alpha} = -1.42 {+-} 0.01 for the faint part, separated at a break point L = 10{sup 37.1} erg s{sup -1}. This break was not found in previous studies of M51 H II regions. Comparison with simulated H II LFs suggests that this break is caused by the transition of H II region ionizing sources, from low-mass clusters (with {approx}10{sup 3} M{sub sun}, including several OB stars) to more massive clusters (including several tens of OB stars). The H II LFs with L < 10{sup 37.1} erg s{sup -1}are found to have different slopes for different parts in M51: the H II LF for the interarm region is steeper than those for the arm and the nuclear regions. This observed difference in H II LFs can be explained by evolutionary effects: H II regions in the interarm region are relatively older than those in the other parts of M51.
Low-level radioactive waste (LLW) and mixed waste (MW) disposal facilities in the US are required to have a service life in excess of 1000 yr. Understanding the rate of degradation of high-density polyethylene (HDPE) geo-membranes (GMs) used in LLW and MW facilities is necessary to assess their service life when conducting a performance assessment for a disposal facility. In LLW and MW disposal facilities, GMs may be exposed to radionuclides that may accelerate antioxidant depletion and degradation. This paper evaluates how radiation dosage affects antioxidant depletion in HDPE GMs and makes inferences regarding the impact of radiation on GM service life. Specimens of 0.04-mm-, 0.1-mm-, and 2-mm-thick HDPE GMs were exposed to a sealed source of Am-241 to simulate alpha radiation from LLW leachate (e.g., uranium). The specimens were exposed to the sealed source for 1-50 h, followed by oxidative induction time (OIT) testing to determine depletion of antioxidants in response to exposure. Penetration of alpha particles in the HDPE GM exposed to the sealed source was evaluated with the program Geometry And Tracking (GEANT4). The GEANT4 modeling indicates that physical dose deposition for alpha particles largely occurs on the superficial layers and decreased monotonically with depth to a negligible dose (∼ 28 μm). For a 2-mm-thick HDPE GM, there was no change in OIT after exposure, whereas in much thinner GMs (e.g., 0.04 mm), significant antioxidant depletion occurred after exposure, reflecting the shallow penetration of alpha radiation at the surface of HDPE GM. (authors)
Molten salt compatibility with structural alloys has been identified as a key issue for the development of Generation 3 concentrating solar power (CSP) systems with thermal storage. To accelerate this evaluation to pumped systems, the goal of this project was to conduct thermal convection loop (TCL) experiments with a peak temperature of ≥700°C and a typical temperature gradient of ~100°C. The experiments indicated that conventional ~16wt.%Cr Ni-based alloys are compatible up to 700°C with purified (i.e. low O) or dried (low H₂O) industrial-sourced Mg-K-Na chloride salt with <10 μm/yr loss. This two-year project was conducted based on the experimental and mechanistic understanding developed more than 60 years ago at Oak Ridge National Laboratory (ORNL). The first TCL experiment met the <15 μm/yr corrosion metric for this project with specimens of Ni-based alloy 600 exposed at 580°-700°C for 1000 h and post-exposure room temperature tensile tests showed minimal degradation. The second TCL experiment successfully deployed an electrochemical sensor from Argonne National Laboratory and had a peak temperature of 750°C but only ran for ~110 h due to a furnace failure. Both experiments used highly purified industrial-sourced salt with an O content of ~3 μg O/g salt and a Mg addition of 0.04 wt.%. In the second year, the Chloride Collective developed a more economical drying procedure such that the O content was much higher (>20,000 μg O/g salt). A third TCL experiment was conducted with a sensor and a peak temperature of 700°C using dried salt from the same industrial source and increased NaCl content (~20 wt.%). In addition to a 0.05% Mg addition to the salt, a Mg coupon was added in the coldest part of the loop which dissolved during the experiment. Again, small mass changes were noted for specimens of alloys 600 and C276 but the values were slightly higher than those measured in purified salt with Mg. A thin non-continuous and non-adherent oxide layer was deposited on most specimens containing Mg, Si and Al but Cr depletion also was observed. Both years included facilities qualification crucible experiments and then capsule experiments to confirm a baseline isothermal reaction rate. The first year capsule experiment led to the conclusion that the two-stage ORNL purification process using NH₄Cl and CCl₄ left the salt with a high Cl potential and a Mg addition (~0.05wt.%) was needed to lower the potential. The second year capsule experiments at 600° and 700°C found little difference in depth of attack for 0-0.25%Mg additions. In general, the complex reactions where salt can be trapped in the porous surface layer of metal indicated that mass change is an unreliable metric and average depth of Cr depletion is a better metric for assessing the extent of attack. These results have created a new baseline that is contrary to the recent published literature for chloride salts where mass losses have been reported that can be extrapolated to very significant annual metal loss rates. Chloride salt corrosion can be controlled and the results also indicate that salt purification to low O levels may not be necessary. However, additional TCL experiments are needed at different times and temperatures to generate important engineering information such as temperature dependent corrosion rates and reaction rate laws for extrapolation to long-term behavior and isolate the effect of salt additives and impurities.
A cesium-free negative hydrogen ion source driven with a lanthanum hexaboride (LaB{sub 6}) filament is being operated without any serious trouble for approximately four years in J-PARC. Although the ion source is capable of producing an H{sup -} ion current of more than 30 mA, the current is routinely restricted to approximately 16 mA at present for the stable operation of the RFQ linac which has serious discharge problem from September 2008. The beam run is performed during 1 month cycle, which consisted of a 4-5 weeks beam operation and a few days down-period interval. At the recent beam run, approximately 700 h continuous operation was achieved. At every runs, the beam interruption time due to the ion source failure is a few hours, which correspond to the ion source availability of more than 99%. The R and D work is being performed in parallel with the operation in order to enhance the further beam current. As a result, the H{sup -} ion current of 61 mA with normalized rms emittance of 0.26 {pi}mm.mrad was obtained by adding a cesium seeding system to a J-PARC test ion source which has the almost same structure with the present J-PARC ion source.
Highlights: • Ni@Ni{sub x}P{sub y} core-shell microstructures are synthesized by a low-temperature phosphidation route. • The initial Ni/NaH{sub 2}PO{sub 2} molar ratio can strongly affect the phase of the final product. • Ni@Ni{sub x}P{sub y} microstructures present good catalytic activity for the reduction of 4-nitrophenol. • The catalytic property of Ni@Ni{sub x}P{sub y} microstructures presents markedly phase-dependent features. - Abstract: Magnetic Ni@Ni{sub x}P{sub y} core-shell microstructures were successfully synthesized by a simple low-temperature phosphidation route, employing Ni nanospheres as the initial nickel source, NaH{sub 2}PO{sub 2}·H{sub 2}O as the phosphorus ion source. The phosphidation reaction was carried out in N{sub 2} atmosphere at 300 °C for 2 h. Experiments showed that the initial Ni/NaH{sub 2}PO{sub 2} molar ratio could strongly affect the phase of the final product. When the Ni/NaH{sub 2}PO{sub 2} molar ratio of 1:2.77 was used, hexagonal Ni{sub 2}P phase was obtained; while the Ni/NaH{sub 2}PO{sub 2} molar ratio was 1:5.54, hexagonal Ni{sub 5}P{sub 4} phase was produced. It was found that the magnetic properties of the products gradually decreased with the conversion from Ni nanospheres, to Ni@Ni{sub 2}P and to Ni@Ni{sub 5}P{sub 4}. Moreover, initial Ni nanospheres, Ni@Ni{sub 2}P and Ni@Ni{sub 5}P{sub 4} core-shell microstructures presented outstanding catalytic activities for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in excess NaBH{sub 4} solution. Ni@Ni{sub 5}P{sub 4} core-shell microstructures owned the best catalytic activity.