SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
An unsupervised classification method was designed as a three step procedure: dimension reduction, classification of channels and clustering of measured reflectance spectra. The basic concept is that similar channels are most likely to characterize typical shapes of reflectance spectrum. Some results are shown which are in good agreement with the known ground truth.
A site in the Great Valley subsection of the Valley and Ridge physiographic province in eastern Pennsylvania was studied to evaluate the use of digital and analog image processing for geologic investigations. Ground truth at the site was obtained by a field mapping program, a subsurface exploration investigation and a review of available published and unpublished literature. Remote sensing data were analyzed using standard manual techniques. LANDSAT-1 imagery was analyzed using digital image processing employing the multispectral Image 100 system and using analog color processing employing the VP-8 image analyzer. This study deals primarily with linears identified employing image processing and correlation of these linears with known structural features and with linears identified manual interpretation; and the identification of rock outcrops in areas of extensive vegetative cover employing image processing. The results of this study indicate that image processing can be a cost-effective tool for evaluating geologic and linear features for regional studies encompassing large areas such as for power plant siting. Digital image processing can be an effective tool for identifying rock outcrops in areas of heavy vegetative cover.
The German airplane program for earth scientific research supports the work of a vast staff of earth scientists from universities and federal agencies. Due to their fields of interest, which are in oceanography, hydrology, geology, ecology, and forestry, five test areas were selected which are spread all over Germany. The sensor package, which was designed in accordance with the requirements of this group of scientists, will be installed in a DO 28 D2 type airplane. The sensor equipment consists of a series of 70-mm cameras having different film/filter combinations, a photogrammetric camera, an infrared radiometer, an 11-channel multispectral line scanner, a LANDSAT-compatible radiometer, and a complex avionic system. Along with the airplane, a truck will be equipped with a set of radiometers and other sensor devices for extensive ground-truth measurement; this also includes a cherry picker.
A pilot project conducted to demonstrate the utility and economy of satellite data in preparing thematic maps of a wilderness area emphasizing those resources of greatest interest to the potential owner is described. Vegetation maps delineating potential commercial timber and maps of suggested mineral prospecting areas of seven scattered regions were prepared by interpretation of LANDSAT images, coupled with a limited amount of ground truth. Images acquired both in winter and summer seasons were registered to township maps and used in making interpretations of the areal extent of commercial timber potentials. The amount of snow cover visible through the forest canopies was found to be a useful indicator of timber potentials. Identification was made of characteristic topographic features which are typical of flood plain deposits or of the well developed trellis drainage patterns which can indicate the strike of structural grain of underlying Cretaceous sedimentary rocks. The presence of igneous and mixed igneous and metamorphic rocks were indicated by combinations of spectral differences and anomalous interruptions of local radial drainage patterns.
The complex dielectric constant of sea water is a function of salinity at 21 cm wavelength, and sea water salinity can be determined by a measurement of emissivity at 21 cm along with a measurement of thermodynamic temperature. Three aircraft and one helicopter experiments using two different 21 cm radiometers were conducted under different salinity and temperature conditions. Single or multiple ground truth measurements were used to calibrate the data in each experiment. It is inferred from these experiments that accuracies of 1 to 2%/OO are possible with a single surface calibration point necessary only every two hours if the following conditions are met--water temperatures above 20 C, salinities above 10%/OO, and level plane flight. More frequent calibration, constraint of the aircraft's orientation to the same as it was during calibration, and two point calibration (at a high and low salinity level) rather than single point calibration may give even better accuracies in some instances.
A data collection program initiated by the Vicksburg District, to develop a workable knowledge of the principles relating to the transport of water and sediment to gain a better understanding of the Mississippi River characteristics is introduced. Aerial photographs and thermal infrared imagery were collected over two test reaches at low and high water stages. Qualitative interpretation of the data relates to the river characteristics such as flow patterns, relative velocities, sediment concentration distribution, water-depth effects, and effects of man made structures. Ground truth information is correlated with the remotely sensed data.
The author has identified the following significant results. Coupling of the aircraft data with the ground truth observations proved to be highly successful with interesting results being obtained with IR and SLAR passive microwave techniques, and standard photography. Of particular interest were the results of the PMIS system which operated at 10.69 GHz with both vertical and horizontal polarizations. This was the first time that dual polarized images were obtained from floating ice. In both sea and lake ice, it was possible to distinguish a wide variety of thin ice types because of their large differences in brightness temperatures. It was found that the higher brightness temperature was invariably obtained in the vertically polarized mode, and as the age of the ice increases the brightness temperature increases in both polarizations. Associated with this change in age, the difference in temperature was observed as the different polarizations decreased. It appears that the horizontally polarized data is the most sensitive to variations in ice type for both fresh water and sea ice. The study also showed the great amount of information on ice surface roughness and deformation patterns that can be obtained from X-band SLAR observations.
A two-step classification algorithm for processing multispectral scanner data was developed and tested. The first step is a single pass clustering algorithm that assigns each pixel, based on its spectral signature, to a particular cluster. The output of that step is a cluster tape in which a single integer is associated with each pixel. The cluster tape is used as the input to the second step, where ground truth information is used to classify each cluster using an iterative method of potentials. Once the clusters have been assigned to classes the cluster tape is read pixel-by-pixel and an output tape is produced in which each pixel is assigned to its proper class. In addition to the digital classification programs, a method of using correlation clustering to process multispectral scanner data in real time by means of an interactive color video display is also described.
The Apollo Soyuz Test Project Stratospheric Aerosol Measurement Experiment was flown to demonstrate that direct solar occultation measurements by photometers and photographs can be used for defining stratospheric aerosol concentrations. Supporting ground truth data were provided by laser radar and balloon borne dustsonde. Initial results show a significant difference in aerosol concentrations between the Northern and Southern Hemispheres.
The author has identified the following significant results. A reasonably good agreement was found for the radiometric temperatures calculated from the ground truth data and the radiometric temperatures measured by the S192 scanner. This study showed that the S192 scanner data could be used to create good thermal images, particularly with the x-5 detector array.
This study was undertaken with the intent of elucidating the forest mapping capabilities of ERTS-1 MSS data when analyzed with the aid of LARS' automatic data processing techniques. The site for this investigation was the Great Dismal Swamp, a 210,000 acre wilderness area located on the Middle Atlantic coastal plain. Due to inadequate ground truth information on the distribution of vegetation within the swamp, an unsupervised classification scheme was utilized. Initially pictureprints, resembling low resolution photographs, were generated in each of the four ERTS-1 channels. Data found within rectangular training fields was then clustered into 13 spectral groups and defined statistically. Using a maximum likelihood classification scheme, the unknown data points were subsequently classified into one of the designated training classes. Training field data was classified with a high degree of accuracy (greater than 95 percent), and progress is being made towards identifying the mapped spectral classes.
A computer approach for mapping mixed forest features (i.e., types, classes) from computer classification maps is discussed. Mixed features such as mixed softwood/hardwood stands are treated as admixtures of softwood and hardwood areas. Large-area mixed features are identified and small-area features neglected when the nominal size of a mixed feature can be specified. The computer program merges small isolated areas into surrounding areas by the iterative manipulation of the postprocessing algorithm that eliminates small connected sets. For a forestry application, computer-classified LANDSAT multispectral scanner data of the Sam Houston National Forest were used to demonstrate the proposed approach. The technique was successful in cleaning the salt-and-pepper appearance of multiclass classification maps and in mapping admixtures of softwood areas and hardwood areas. However, the computer-mapped mixed areas matched very poorly with the ground truth because of inadequate resolution and inappropriate definition of mixed features.
An ad hoc map evaluation procedure is proposed which is most suitable for evaluating low-resolution classification maps against high resolution ground truth maps, such as maps against interpreted aircraft photographs. Commonly practiced sampling and evaluation procedures are impracticable in this context because of difficulties in registration and in comparing the samples. This ad hoc procedure is designed to overcome these two major problems, and its practicability is discussed. Two widely accepted parameters are estimated by the new procedure; namely, the probability of correct classification and the proportion biases. Statistical qualifications are also provided.
A brief review of remote sensing state-of-the-art is presented. Emphasis is placed on an understanding of remote sensing terminology. Passive and active sensors and sensor platforms from the spacecraft program to the ground truth program are described.
In June, July, and August, 1975, ground truth was collected from Lake McConaughy, a 35,000 acre reservoir in western Nebraska, coincident with the overflights of LANDSAT. Water samples were collected on six different dates and analyzed for turbidity, suspended solids, and chlorophyll, parameters which had correlated well with CCT reflectances. The correlations and regressions reported were derived from data obtained on only three of the six sampling dates. The radiance values from each of the four spectral bands were printed out in the form of a map of Lake McConaughy. Reflectances in the various bands were then obtained from the map at the appropriate sampling sites. The dependent variables chlorophyll, suspended solids, and turbidity were compared to the independent variables - reflectances in the four bands - by regression analysis. Both multiple and univariate regressions were examined. It is concluded that CCT's from LANDSAT can be used to detect and quantify the water quality parameters suspended solids, turbidity, and chlorophyll.
The author has identified the following significant results. Techniques of preprocessing, interpretation, classification, and ground truth sampling were studied. It has shown the need for a low cost, low level technology, viable, operational methodology to replace the emphasis given in the U.S. to machine processing, which many developing countries cannot afford, understand, nor implement.
The author has identified the following significant results. Outside the U.S., various attempts were made to investigate the feasibility of utilizing orbital MSS imagery in the production of small scale land use maps. Overall, these studies are not as elaborate or extensive in their scope as the U.S. ones, and generally the non-U.S. investigators have employed nonsophisticated and less expensive techniques. A representative range of studies is presented to demonstrate the approaches and trends dealing with reprocessing, interpretation, classification, sampling, and ground truth procedures.
Data from the first Earth Resource Technology Satellite (LANDSAT-1) multispectral scanner (MSS) were used to develop three plant canopy models (Kubelka-Munk (K-M), regression, and combined K-M and regression models) for extracting plant, soil, and shadow reflectance components of cropped fields. The combined model gave the best correlation between MSS data and ground truth, by accounting for essentially all of the reflectance of plants, soil, and shadow between crop rows. The principles presented can be used to better forecast crop yield and to estimate acreage.