Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Graphical User Interfaces(GUIs)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Adaptive smart simulator for characterization and MPPT construction of PV array

Partial shading conditions are among the most important problems in large photovoltaic array. Many works of literature are interested in modeling, control and optimization of photovoltaic conversion of solar energy under partial shading conditions, The aim of this study is to build a software simulator similar to hard simulator and to produce a shading pattern of the proposed photovoltaic array in order to use the delivered information to obtain an optimal configuration of the PV array and construct MPPT algorithm. Graphical user interfaces (Matlab GUI) are built using a developed script, this tool is easy to use, simple, and has a rapid of responsiveness, the simulator supports large array simulations that can be interfaced with MPPT and power electronic converters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Recent SCALE Activities Within the Nuclear Criticality Safety Program

The role of SCALE in the Department of Energy’s Nuclear Criticality Safety Program (NCSP) is defined according to the Five-Year Plan, and summarized as follows. 1. Sustain/improve SCALE NCS features through user driven enhancements, software quality assurance (SQA) and validation and verification (V&V). 2. Assure adaptability to various computing platforms and compilers. 3. Improve user interfaces/documentation consistent with modern engineering software. 4. Support responsive communication to SCALE criticality safety users through SCALE Newsletters, email notices, and updates on the SCALE website. 5. Modernize software infrastructure and capabilities to improve quality and reliability and to ensure long term sustainability of the NCS capabilities. This paper describes the specific activities which have been performed within each area above for the NCSP in the fiscal year (FY) 2018, from October 1, 2017, to September 30, 2018.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

EMPIRE-3.2 Nuclear reaction code system [Slides]

The presentation discusses the scope of EMPIRE, EMPIRE's convenience, the EMPIRE-3.2 (Malta) Nuclear Reaction Model Code, reaction models, and what is needed to improve EMPIRE's predictive power.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Frequent Fulcrum Functions: The Basics of SCALE’s Graphical User Interface [Slides]

This tutorial introduces the Fulcrum graphical user interface and the basic functions that enhance the common activities of creating, editing, navigating, executing, and visualizing SCALE input files. This tutorial will help you become familiar with the Fulcrum input file text editor and the integrated input development environment features of autocompletion, automatic checking, cursor context, and input navigation. In addition, the Fulcrum and SCALE runtime environment will be reviewed to improve the understanding of job execution workflow. This tutorial does not cover data and geometry plotting. Please see the Advanced User Interface Capabilities tutorial for details regarding plotting data and geometry. No prior experience with SCALE is required. You can follow along using SCALE 6.2 or 6.3-beta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Advanced User Interface Capabilities [Slides]

This tutorial will review the data plotting and geometry visualization capabilities in the Fulcrum user interface. This tutorial will help you become familiar with Fulcrum’s 2D plot, and 2D and 3D geometry visualization features. You will learn how to identify plottable data items, compose and export plot and plot data for SCALE plot formats (SDF, Ampx MG/CE, PLT, F71, PTP, SPF, ORIGEN Gamma data, etc.) and visualize, navigate, cut, hide, and export the geometry and spatial data (fission-, dose-map, etc.) overlays in 2D and 3D. No prior experience with SCALE is required. Attendees can follow along using 6.3.0-beta.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Smart Thermal Block Diagram Tool

The presentation describes a Smart Thermal Block Diagram Tool. It is used by JPL's Team X in studying missions during the Pre-Phase A. It helps generate cost and mass estimates using proprietary data bases.

thermal↗

RESOLVE 2010 Field Test

This slide presentation reviews the field tests conducted in 2010 of the Regolith Environment Science & Oxygen & Lunar Volatile Extraction (RESOLVE). The Resolve program consist of several mechanism: (1) Excavation and Bulk Regolith Characterization (EBRC) which is designed to act as a drill and crusher, (2) Regolith Volatiles Characterization (RVC) which is a reactor and does gas analysis,(3) Lunar Water Resources Demonstration (LWRD) which is a fluid system, water and hydrogen capture device and (4) the Rover. The scientific goal of this test is to demonstrate evolution of low levels of hydrogen and water as a function of temperature. The Engineering goals of this test are to demonstrate:(1) Integration onto new rover (2) Miniaturization of electronics rack (3) Operation from battery packs (elimination of generator) (4) Remote command/control and (5) Operation while roving. Views of the 2008 and the 2010 mechanisms, a overhead view of the mission path, a view of the terrain, the two drill sites, and a graphic of the Master Events Controller Graphical User Interface (MEC GUI) are shown. There are descriptions of the Gas chromatography (GC), the operational procedure, water and hydrogen doping of tephra. There is also a review of some of the results, and future direction for research and tests.

Captain, J.↗

Simulation Control Graphical User Interface Logging Report

One of the many tasks of my project was to revise the code of the Simulation Control Graphical User Interface (SIM GUI) to enable logging functionality to a file. I was also tasked with developing a script that directed the startup and initialization flow of the various LCS software components. This makes sure that a software component will not spin up until all the appropriate dependencies have been configured properly. Also I was able to assist hardware modelers in verifying the configuration of models after they have been upgraded to a new software version. I developed some code that analyzes the MDL files to determine if any error were generated due to the upgrade process. Another one of the projects assigned to me was supporting the End-to-End Hardware/Software Daily Tag-up meeting.

Hewling, Karl B., Jr.↗

LaRC SmartLab Apps For Instrument Control and Data Processing: Laboratory Environment Monitor

The LaRC SmartLab applications are a series of software tools to greatly enhance researcher efficiency by streamlining and automating workflows. Python scripts and applications are increasingly being used in scientific workflows, including for instrument control and data processing. Interactive Python scripting environments such as JupyterLab provide powerful tools for using Python. In some use cases, the development of standalone applications with dedicated graphical user interfaces can enhance the utility of the code and open it up to more users, including non-programmers. Here, we describe a Python based application for communicating with, and displaying data from, iTHX Temperature, Humidity, and Dew Point probes. We discuss the set up and use of the application as well as its implementation. We also highlight the use of Simulated probes to enable users and developers to familiarize with or debug the application, even when they do not have access to the physical hardware in the laboratory.

LaRC SmartLab↗

GAM/GAMV GUI

The GAM/GAMV GUI provides a graphic user interface to public domain FORTRAN codes (gam, version 2.0 and gamv, version 2.0) that were developed at Stanford University in 1998 (see Deutsch and Journel, 1998). The gam and gamv codes allow for calculation of different measures of spatial variability and spatial correction from a set of available data. The GAM/GAMV GUI accesses the executable versions of the gam and gamv software, initiates the calculations by the executables and manages the outputs of the executables in a user friendly graphical manner. Additionally, the GAM/GAMV GUI code then provides the user with both automatic and interactive tools in a graphical interface to fit models to the calculations of the spatial variation/correlation of the data. The GAM/GAMV GUI software allows the user to get various parameters for the gam and gamv executables that do the actual calculations by using dialog boxes, it provides some error checking as these parameters are set and then allows the user to run the calculation by calling the executable compiled from the previously developed FORTRAN software. The resulting output of the gam or gamv codes can be visualized in the GAM/GAMV GUI interface. The visualization portion of GAM/GAMV allows for both automatic and manual fitting of the model of spatial variation/correlation. GAM/GAMV GUI can be run in batch mode from the command line without invoking the graphical interface.

McKenna, Sean↗

KT3D GUI

The KT3D GUI provides a graphic user interface to a public domain FORTRAN code (kt3d) that was developed at Stanford University in 1998 (see Deutsch and Journel, 1998). The kt3d software contains the implementation of several kriging algorithms that complete spatial estimation onto a grid or a set of points from a set of available data and using a variogram model to describe the spatial variation of the data. The variogram model is calculated and modeled using the GAM/GAMV GUI software described separately. The KT3D GUI software allows the user to set various parameters for the FORTRAN code by using dialog boxes, it provides some error checking as these parameters are set and then allows the user to run the calculation by calling the executable compiled from the previously developed FORTRAN software. The resulting output of the kt3d code can be visualized in the KT3D GUI in several ways. If a gridded estimation problem is selected, color maps of the estimated values and the kriging variance are displayed in side by side images. If either jackknifing or cross-validation options are selected, then a series of user-defined X-Y plots can be created.

McKenna, Sean↗

The QUIC Start Guide (V.6.4.9)

QUIC stands for the Quick Urban & Industrial Complex (QUIC) dispersion modeling system. QUIC is a fast response urban dispersion model that runs on a laptop. QUIC is comprised of a 3D wind field model called QUIC-URB, a transport and dispersion model called QUIC-PLUME, and graphical user interface called QUIC-GUI. QUIC also includes QUIC-PRESSURE to solve for pressure fields in and around buildings, a population exposure assessment tool called QUIC-POP, and an indoor infiltration calculator for computing indoor concentrations. Transport and dispersion for different types of airborne contaminants can be computed on building to neighborhood scales in tens of seconds to tens of minutes. QUIC will never give perfect answers, but it will account for the effects of buildings in an approximate way and provide more realism than non-building aware dispersion models.

97 MATHEMATICS AND COMPUTING↗

SolVap_StarTer (Solvent Evaporation Graphical User Interface) [SWR-26-029]

SolVap_StarTer is an open-source solvent evaporation GUI. The software combines previously published (peer-reviewed scientific journals) evaporation and crystallization physics into an easy-to-use graphical interface. The software will allow the user to specify a coating composition and drying environment, and then predict the evolution of the film as it dries. Potential applications include tracking the change in multi-solvent composition and solute concentration in solution-processed perovskites films, predicting the point of crystallization, and calculating equivalent processing parameters for transferring a process between different coating and drying methods. Github repo: https://github.com/NatLabRockies/SolVap Streamlit app: https://solvap.streamlit.app/

Starger, Jesse [National Laboratory of the Rockies↗

SU-D-9A-03: STAMP: Simulator for Texture Analysis in MRI/PET

Purpose: To develop a convenient simulation platform to facilitate PET/MR image analysis with the prospect of gaining a better understanding of the influence of acquisition parameters on PET/MRI textural features. The simulation platform is demonstrated by showing textural variations of a representative case study using different image acquisition parameters. Methods: The simulation platform is composed of MRI simulators JEMRIS and SIMRI to achieve simulations of customized MRI sequences on sample tumor models. The PET simulator GATE is used to get 2D and 3D Monte Carlo acquisitions of voxelized PET sources using a phantom geometry and a customized scanner architecture. The platform incorporates a series of graphical user interfaces written in Matlab. Two GUIs are used to facilitate communication with the simulation executables installed on a computer cluster. A third GUI is used to collect and display the clinical and simulated images, as well as fused PET/MRI images, and perform computation of textural features.To illustrate the capabilities of this platform, one FDG-PET and T1-weighted (T1w) digitized tumor models were generated from clinical images of a soft-tissue sarcoma patient. Numerically simulated MR images were produced using 3 different echo times (TE) and 5 different repetition times (TR). PET 2D images were simulated using an OSEM algorithm with 1 to 32 iterations and a post-reconstruction Gaussian filter of 0, 2, 4 or 6 mm width. Results: STAMP was successfully used to produce numerically simulated FDG-PET and MRI images, and to calculate their corresponding textures. Three typical textures (GLCM-Contrast, GLSZM-ZSV and NGTDM-Coarseness) were found to vary by a range of 45% on average compared to reference scanning conditions in the case of FDG-PET, and by a range of 40% in the case of T1w MRI. Conclusion: We have successfully developed a Matlab-based simulation platform to facilitate PET/MRI texture image analysis for outcome prediction.

60 APPLIED LIFE SCIENCES↗

Demonstration of a Spoken Dialogue Interface for Planning Activities of a Semi-autonomous Robot

Planning and scheduling in the face of uncertainty and change pushes the capabilities of both planning and dialogue technologies by requiring complex negotiation to arrive at a workable plan. Planning for use of semi-autonomous robots involves negotiation among multiple participants with competing scientific and engineering goals to co-construct a complex plan. In NASA applications this plan construction is done under severe time pressure so having a dialogue interface to the plan construction tools can aid rapid completion of the process. But, this will put significant demands on spoken dialogue technology, particularly in the areas of dialogue management and generation. The dialogue interface will need to be able to handle the complex dialogue strategies that occur in negotiation dialogues, including hypotheticals and revisions, and the generation component will require an ability to summarize complex plans. This demonstration will describe a work in progress towards building a spoken dialogue interface to the EUROPA planner for the purposes of planning and scheduling the activities of a semi-autonomous robot. A prototype interface has been built for planning the schedule of the Personal Satellite Assistant (PSA), a mobile robot designed for micro-gravity environments that is intended for use on the Space Shuttle and International Space Station. The spoken dialogue interface gives the user the capability to ask for a description of the plan, ask specific questions about the plan, and update or modify the plan. We anticipate that a spoken dialogue interface to the planner will provide a natural augmentation or alternative to the visualization interface, in situations in which the user needs very targeted information about the plan, in situations where natural language can express complex ideas more concisely than GUI actions, or in situations in which a graphical user interface is not appropriate.

Dowding, John↗

MSFC Natural Environments Tower QC, Verification GUI, and Future Work

Natural Environments (EV44) has developed a new methodology for performing quality control (QC) of tower data. The latest step reached in developing these methods is the creation of a Graphic User Interface to manually verify automated QC flags. This presentation outlines how the GUI is used to investigate QC flags and data, as well future plans for developing new QC tower databases.

James C Brenton↗