Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gradient information”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High-speed volumetric imaging of formaldehyde in a lifted turbulent jet flame using an acousto-optic deflector

The development of high-speed volumetric laser-induced fluorescence measurements of formaldehyde (CH 2 O-LIF) using a pulse-burst laser operated at a repetition rate of 100 kHz is presented here. A novel laser scanning system employing an acousto-optic deflector (AOD) enables quasi-4D CH 2 O-LIF imaging at a scan frequency of 10 kHz. The diagnostic capability of time-resolved volumetric imaging is demonstrated in a partially premixed DME/air lifted turbulent jet flame near the flame base. Simultaneous imaging of laser beam profiles is performed to account for the laser pulse energy fluctuation and laser sheet inhomogeneity. With the accurate registration of laser sheet positions, the volumetric reconstruction of CH 2 O-LIF signals is performed within a detection volume of 17.3 × 11.9 × 2.3 mm 3 with an average out-of-plane spatial resolution of 250μm. A surface detection algorithm with adaptive thresholding is used to determine the global maximum intensity gradient by calculating gradient percentiles. The flame topology characteristics are investigated by evaluating the 3D curvatures of CH 2 O surfaces. Curvatures calculated using 2D data systematically underestimate the full 3D curvature due to the lack of out-of-plane information. The inner surfaces near the turbulent fuel jet exhibit higher probabilities of large mean curvature than the outer surfaces. The saddle and cylindrical structures are dominant on both the inner and outer surfaces and the elliptic structures occur with lower probability. The results suggest that the damping of turbulent fluctuations by the temperature increase through the CH 2 O region reduces the curvature, but the local structure topology remains self-similar.

42 ENGINEERING↗
DOE OSTI2020

Computationally efficient CFD prediction of bubbly flow using physics-guided deep learning

To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale framework was proposed in this paper by applying a physics-guided data-driven approach. Instrumental to this framework, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. In this work, by defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. In a demonstration case of two-phase bubbly flow, the DFNN model well captured and corrected the unphysical “peaks” in the velocity and void fraction profiles near the wall in the coarse-mesh configuration, even for extrapolative predictions. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Single-shot in-line x-ray phase-contrast imaging of void-shockwave interactions in fusion energy materials

Recent breakthroughs in nuclear fusion, specifically the report of reactions exceeding scientific breakeven at the National Ignition Facility (NIF), highlight the potential of inertial fusion energy (IFE) as a sustainable and virtually limitless energy source. However, further progress in IFE requires characterization of defects in ablator materials and how they affect fuel capsule compression. Voids within the ablator can degrade energy yield, but their impact on the density distribution has primarily been studied through simulations, with limited high-resolution experimental validation. To address this, we used the x-ray free-electron laser (XFEL) at the matter in extreme conditions (MECs) instrument at the Linac coherent light source (LCLS) to capture 2D x-ray phase-contrast (XPC) images of a void-bearing sample with a composition similar to inertial confinement fusion (ICF) ablators. By driving a compressive shockwave through the sample using MEC's long-pulse laser system, we analyzed how voids influence shockwave propagation and density distribution during compression. To quantify this impact, we extracted phase information using two phase retrieval algorithms. First, we applied the contrast transfer function (CTF) method, paired with Tikhonov regularization and a fast optimization approach to generate an initial phase estimate. We then refined the result using a projected gradient descent (PGD) method that works directly with the sample's refractive index. Comparing these results with radiation adaptive grid Eulerian (xRAGE) radiation hydrodynamic simulations enables identification of model validation needs or improvements. By calculating phase maps in situ, it becomes possible to reconstruct areal density maps, improving understanding of laser-capsule interactions and advancing IFE research.

Hodge, D. S. [Colorado State Univ., Fort Collins, ↗
NASA NTRS1972

Heat flow and convection demonstration experiments aboard Apollo 14.

A group of experiments was conducted by Apollo 14 astronaut Stuart A. Roosa during the lunar flyback on Feb. 7, 1971, to obtain information on heat flow and convection in gases and liquids in an environment of less than 0.000001 g gravity. Flow observations and thermal data have shown that: (1) there are, as expected, convective motions caused by surface tension gradients in a plane liquid layer with a free upper surface; (2) heat flow in enclosed liquids and gases occurs mainly by diffusive heat conduction; and (3) some convective processes, whose characteristics are not fully known, add to the heat transfer.

Grodzka, P. G.↗
NASA NTRS1994

Measuring attitude with a gradiometer

Static attitude estimation and dynamic attitude estimation are used to describe a gradiometer composed of a number of accelerometers that are used to measure a combination of the local gravity gradient and instrument rotation effects. After a series of measures to isolate the gradient, a global mesh of measurements can be obtained that determine the planetary external gravity potential. Orbital and spacecraft models are developed to determine if, when the gravity potential is known, the same measurements, unsupported by any other information can be used to infer the spacecraft attitude.

Sonnabend, David↗
NASA NTRS2002

Thermostructural Analysis of Carbon Cloth Phenolic Material Tested at the Laser Hardened Material Evaluation Laboratory

RSRM nozzle liner components have been analyzed and tested to explore the occurrence of anomalous material performance known as pocketing erosion. Primary physical factors that contribute to pocketing seem to include the geometric permeability, which governs pore pressure magnitudes and hence load, and carbon fiber high temperature tensile strength, which defines a material limiting capability. The study reports on the results of a coupled thermostructural finite element analysis of Carbon Cloth Phenolic (CCP) material tested at the Laser Hardened Material Evaluation Laboratory (the LHMEL facility). Modeled test configurations will be limited to the special case of where temperature gradients are oriented perpendicular to the composite material ply angle. Analyses were conducted using a transient, one-dimensional flow/thermal finite element code that models pore pressure and temperature distributions and in an explicitly coupled formulation, passes this information to a 2-dimensional finite element structural model for determination of the stress/deformation behavior of the orthotropic fiber/matrix CCP. Pore pressures are generated by thermal decomposition of the phenolic resin which evolve as a multi-component gas phase which is partially trapped in the porous microstructure of the composite. The nature of resultant pressures are described by using the Darcy relationships which have been modified to permit a multi-specie mass and momentum balance including water vapor condensation. Solution to the conjugate flow/thermal equations were performed using the SINDA code. Of particular importance to this problem was the implementation of a char and deformation state dependent (geometric) permeability as describing a first order interaction between the flow/thermal and structural models. Material property models are used to characterize the solid phase mechanical stiffness and failure. Structural calculations were performed using the ABAQUS code. Iterations were made between the two codes involving the dependent variables temperature, pressure and across-ply strain level. Model results comparisons are made for three different surface heat rates and dependent variable sensitivities discussed for the various cases.

Clayton, J. Louie↗
DOE OSTI2021

Analysis of Selected Publicly Available Geothermal Exploration Data Gaps

As part of a United States Department of Energy (DOE) supported retrospective analysis of DOE's Play Fairway Analysis (PFA) projects, the National Renewable Energy Laboratory (NREL) compiled and analyzed publicly available geothermal exploration datasets to identify and highlight data gaps in areas prospective for hosting geothermal resources. The analysis was intended to understand the existing geographic coverage of selected datasets commonly utilized both by the PFA projects and geothermal developers during resource assessments including geologic mapping, temperature gradient drilling, and aeromagnetic, gravimetric, and lidar surveys. Results indicate that broad areas of the western United States estimated to have geothermal potential lack sufficient geologic and geophysical coverage necessary for even regional resource exploration. The study directly informed the recent Geoscience Data Acquisition for Western Nevada, or GeoDAWN - which united DOE's Geothermal Technologies Office (GTO) with the U.S. Geological Survey (USGS) of the U.S. Department of the Interior to assist U.S. needs for energy and critical minerals. The study also has the potential to inform public investment in further data acquisition for characterization of the Earth both for geothermal and other natural resource assessments.

data↗
DOE OSTI2020

DEMONSTRATION OF A DATA-DRIVEN PHYSICS-BASED APPROACH FOR COMPUTATIONALLY EFFICIENT CFD PREDICTION OF TWO-PHASE BUBBLY FLOW

To realize efficient computational fluid dynamics (CFD) prediction of two-phase flow, a multi-scale physics-guided data-driven approach, Feature Similarity Measurement (FSM) technique was developed for error estimation in two-phase flow simulation using coarse-mesh CFD, to achieve a comparable accuracy as fine-mesh simulations with fast-running feature. By defining physics-guided parameters and variable gradients as physical features, FSM has the capability to capture the underlying local patterns in the coarse-mesh CFD simulation. Massive low-fidelity data and respective high-fidelity data are used to explore the underlying information relevant to the main simulation errors and the effects of phenomenological scaling. By learning from previous simulation data, a surrogate model using deep feedforward neural network (DFNN) can be developed and trained to estimate the simulation error of coarse-mesh CFD. In a demonstration case of two-phase bubbly flow, the DFNN model well captured and corrected the unphysical “peaks” in the velocity and void fraction profiles near the wall in the coarse-mesh configuration, even for extrapolative predictions. The research documented supports the feasibility of the physics-guided deep learning methods for coarse mesh CFD simulations which has a potential for the efficient industrial design.

42 ENGINEERING↗
DOE OSTI2025

Estimation of intensity, footprint, and capacity of surface urban heat islands using a direction-enhanced adaptive synchronous extraction (DEASE) method

Here, the surface urban heat island (SUHI) effect, assessed through remotely sensed land surface temperature (LST), remains a focal point in urban climate research. Conventional indicators like SUHI intensity (SUHII) and footprint (SUHIF) capture peak values and spatial extent but fail to account for the cumulative thermal load—a critical dimension reflecting the total heat exposure imposed by spatially continuous warming, which directly limits a holistic assessment of ecological and societal impacts of the SUHI effect. Therefore, this study introduces an indicator termed SUHI capacity (SUHIC), designed to quantify the aggregated SUHI effect by integrating the magnitude of the warming signal across all affected areas, thereby enabling a more comprehensive evaluation of urban thermal environments. Furthermore, a direction-enhanced adaptive synchronous extraction (DEASE) method is proposed for the quantification of SUHIC. This method can dynamically identify the optimal background reference area based on the urban-rural LST gradients in various directions within the city, without relying on predefined mathematical models as previously. The results from 102 European cities first confirm that the directional variations in urban-rural LST gradients, and the DEASE method can effectively capture these distinctions for the simultaneous estimation of SUHII, SUHIF, and SUHIC. Secondly, the spatial patterns of absolute SUHIC values show strong associations with those of SUHIF (R2>0.86), while its relative values (normalized by the area of urban) align more closely with SUHII (R2 > 0.64). More importantly, SUHIC can serve as a crucial reference for assessing the urban thermal signal when SUHII and SUHIF diverge. The proposed method and framework contribute to standardizing the quantification of the SUHI effect.

Indicator↗
DOE OSTI2022

Arctic Shrub Expansion, Plant Functional Trait Variation, and Effects on Belowground Carbon Cycling (Final Technical Report)

Terrestrial ecosystems are undergoing dramatic changes in response to climate warming, and these changes are expected to feedback to the atmosphere, potentially altering the trajectory of future climate change. Feedbacks from Arctic ecosystems are a major concern because the Arctic is projected to warm significantly in the 21 st century and because >50% of global belowground organic carbon is stored in permafrost and overlying soils. Warming-driven release of this carbon could drastically increase atmospheric greenhouse gas concentrations and accelerate climate warming. Plant communities are also responding to warming, as evidenced by the widely documented increase in woody-shrub growth and “greening” across much of the Arctic tundra biome. This vegetation shift may offset or amplify warming by altering carbon cycling. The direction and magnitude of shrub effects remain highly uncertain, however, due to limited understanding of the consequences of shrub expansion for belowground carbon cycling and simplification of these relationships in models. The major shrubs expanding in the Arctic (Betula, Salix, and Alnus) vary widely with respect to aboveground and belowground traits (e.g., tissue production and chemistry, rooting depth, microbial symbionts), and may also exhibit substantial intraspecific variation in these traits in response to environmental conditions. Such variation is likely to have profound implications for soil carbon cycling. The overarching goal of this project was to improve process-based understanding of the influence of shrub expansion on carbon cycling to enable improved representation of carbon dynamics in ecosystem and Earth system models. We investigated how plant functional traits vary among shrub genera, respond to environmental conditions, and affect belowground carbon and nutrient cycling by quantifying relationships among functional traits and biogeochemical cycling along edaphic gradients nested within a climate gradient in the Alaskan tundra. We found consistent differences in leaf and root traits among shrub genera and between shrubs and a widespread sedge species, indicating diverse nutrient acquisition strategies and belowground impacts among different arctic shrubs. We also found striking differences in trait values among individuals within the same species or genera within sites. Soil parameters were more important than climate parameters for predicting size and leaf trait variation, and root trait responses were less dependent on climate overall. For all but one root trait, including parameters representing aboveground traits improved the predictive ability of models. These results demonstrate that tundra shrub traits vary considerably at local scales and soil factors drive this variation, especially belowground. Furthermore, leveraging information about aboveground traits and soil conditions can improve predictions of how belowground traits will respond to climate change. Despite these differences, soil carbon and nitrogen pools in the active layer did not vary among plots dominated by different shrub or sedge genera. Instead, pool sizes generally decreased from warmer to colder sites, consistent with a productivity gradient. Patterns of isotopic N composition indicate that shrubs tighten nitrogen cycling via nitrogen resorption or immobilization of shrub litter. Overall, these results suggest that further identifying the specific shrub genera in the tundra landscape will ultimately provide better predictions of belowground dynamics across the changing arctic. We also performed simulation experiments with the Terrestrial Ecosystem Model (TEM) incorporated in the Predictive Ecosystem Analyzer (PEcAn) framework, treats model parameters as probability distributions, estimates parameters based on a synthesis of available field data, and then quantifies both model sensitivity and uncertainty to a given parameter or suite of parameters. We performed simulations across different types of tundra, including shrub tundra. One key finding was that both model sensitivity and uncertainty to a given parameter could vary within the same type of tundra, but in a different geographical location, such as over the climate gradient of shrub tundra described above. We organized a special session at the annual meeting of the Ecological Society of America in August 2019 to disseminate our results, refine recommendations for model improvement, and initiate collaborations to implement these recommendations in existing models of tundra carbon dynamics at ecosystem to Earth system scales. Our results support DOE near-term priorities by providing mechanistic insights into the role of vegetation change in the terrestrial carbon cycle in a region that is inadequately represented in Earth system models. Current models reduce the complexity of Arctic vegetation to a small number of plant functional types (PFTs). This approach implicitly assumes that each PFT represents the average ecological function of its constituent species, thus ignoring the effects of trait variation on biogeochemical cycling and potentially leading to large uncertainty in the sign and magnitude of ecosystem feedbacks to climate. By quantifying variation of plant functional traits across broad gradients of climatic and edaphic conditions and elucidating the linkages of such variation with carbon and nutrient cycling, our results illustrate the need and create a foundation for further developing trait-based modeling approaches that allow the traits of PFTs to vary as a function of environmental conditions. These approaches should improve the capacity of simulation models to offer insights into ecosystem carbon dynamics associated with novel plant communities in a rapidly changing Arctic.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Machine Learning-Based Classification of Lignocellulosic Biomass from Pyrolysis-Molecular Beam Mass Spectrometry Data

High-throughput analysis of biomass is necessary to ensure consistent and uniform feedstocks for agricultural and bioenergy applications and is needed to inform genomics and systems biology models. Pyrolysis followed by mass spectrometry such as molecular beam mass spectrometry (py-MBMS) analyses are becoming increasingly popular for the rapid analysis of biomass cell wall composition and typically require the use of different data analysis tools depending on the need and application. Here, the authors report the py-MBMS analysis of several types of lignocellulosic biomass to gain an understanding of spectral patterns and variation with associated biomass composition and use machine learning approaches to classify, differentiate, and predict biomass types on the basis of py-MBMS spectra. Py-MBMS spectra were also corrected for instrumental variance using generalized linear modeling (GLM) based on the use of select ions relative abundances as spike-in controls. Machine learning classification algorithms e.g., random forest, k-nearest neighbor, decision tree, Gaussian Naïve Bayes, gradient boosting, and multilayer perceptron classifiers were used. The k-nearest neighbors (k-NN) classifier generally performed the best for classifications using raw spectral data, and the decision tree classifier performed the worst. After normalization of spectra to account for instrumental variance, all the classifiers had comparable and generally acceptable performance for predicting the biomass types, although the k-NN and decision tree classifiers were not as accurate for prediction of specific sample types. Gaussian Naïve Bayes (GNB) and extreme gradient boosting (XGB) classifiers performed better than the k-NN and the decision tree classifiers for the prediction of biomass mixtures. The data analysis workflow reported here could be applied and extended for comparison of biomass samples of varying types, species, phenotypes, and/or genotypes or subjected to different treatments, environments, etc. to further elucidate the sources of spectral variance, patterns, and to infer compositional information based on spectral analysis, particularly for analysis of data without a priori knowledge of the feedstock composition or identity.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2007

A Comprehensive Characterization of Microorganisms and Allergens in Spacecraft Environment

The determination of risk from infectious disease during long-duration missions is composed of several factors including (1) the host#s susceptibility, (2) the host#s exposure to the infectious disease agent, and (3) the concentration of the infectious agent, and (4) the characteristics of the infectious agent. While stringent steps are taken to minimize the transfer of potential pathogens to spacecraft, several medically significant organisms have been isolated from both the Mir and International Space Station (ISS). Historically, the method for isolation and identification of microorganisms from spacecraft environmental samples depended upon their growth on culture media. Unfortunately, only a fraction of the organisms may grow on a culture medium, potentially omitting those microorganisms whose nutritional and physical requirements for growth are not met. Thus, several pathogens may not have been detected, such as Legionella pneumophila, the etiological agent of Legionnaire#s disease. We hypothesize that environmental analysis using non-culture-based technologies will reveal microorganisms, allergens, and microbial toxins not previously reported in spacecraft, allowing for a more complete health assessment. The development of techniques for this flight experiment, operationally named SWAB, has already provided advances in NASA laboratory processes and beneficial information toward human health risk assessment. The first accomplishment of the SWAB experiment was the incorporation of 16S ribosomal DNA sequencing for the identification of bacteria. The use of this molecular technique has increased bacterial speciation of environmental isolates from previous flights three fold compared to conventional methodology. This increased efficiency in bacterial speciation provides a better understanding of the microbial ecology and the potential risk to the crew. Additional SWAB studies focused on the use of molecular-based DNA fingerprinting using repetitive sequencebased polymerase chain reaction (rep-PCR). This technology has allowed contamination tracking of microorganisms between crewmembers and their environment. This study not only demonstrated that ISS has a greater diversity of organisms than originally expected, but also provided insight into possible routes of infection to the crew. Additional ground-based studies used rep-PCR and protein based assays to determine the potential of methicillin resistant Staphylococcus aureus (MRSA) aboard ISS. MRSA has become increasingly common on Earth and pose a treatment problem for infections during flight. While no MRSA have been isolated from ISS to date, the mecA gene product that is responsible for methicillin resistance was isolated in other Staphylococcus species aboard ISS suggesting a potential of MRSA through gene transfer. Using improved sample collection technologies, flight sampling for SWAB was initiated in August 2006 and should continue through spring of 2007. The focus of these flight samples is the collection of DNA for evaluation by Denaturing Gradient Gel Electrophoresis (DGGE). Unlike other techniques, DGGE does not depend on any microbial growth on culture media allowing a more comprehensive assessment of the spacecraft interior. This study should provide insight into the true microbial ecology that is experienced by the crew during flight. This information will lead toward an accurate microbial risk assessment to help set flight requirements to protect the safety, health, and performance of the crew.

Ott, C. M.↗
DOE OSTI2025

Improving vertical detail in simulated temperature and humidity data using machine learning

Atmospheric models used for weather forecasting and climate predictions discretise the atmosphere onto a vertical grid. There are however atmospheric phenomena that occur on scales smaller than the thickness of those model layers. The formation of low-level clouds due to temperature inversions is an example. This leads to atmospheric models underestimating, or even missing, these clouds and their radiative effects. Using radiosonde observations as training data, a machine learning model is used to improve the vertical detail of modelled profiles of temperature and specific humidity. In addition, a physics-informed machine learning model is developed and compared to the traditional approach; showing improvements in the cloud fraction profiles calculated from its predictions. The vertically enhanced profiles also improve the representation of layers of convective inhibition and anomalous refractivity gradients. This work facilitates targeted improvements to the representation of certain atmospheric processes without the burden of increased memory and computational cost from increasing vertical resolution throughout the whole model.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Phase field modeling of dislocations and obstacles in InSb

We present a phase-field dislocation dynamics (PFDD) model informed by first-principle calculations to elucidate the competitive dislocation nucleation and propagation between the glide and shuffle sets in InSb diamond cubic crystal. The calculations are directly informed with generalized stacking fault energy curves on the (111) slip plane for both the “glide set,” with the smaller interplanar spacing, and the “shuffle set,” with the larger interplanar spacing. The formulation also includes elastic anisotropy and the gradient term associated with the dislocation core. The PFDD calculations show that under no stress the equilibrium structure of screw glide set dislocations dissociates into Shockley partials, while those of the shuffle set dislocations do not dissociate, remaining compact. The calculated dislocation core widths of these InSb dislocations agree well with the measured values for other semiconductor materials, such as Si and GaN. We find that a shuffle set dislocation emits from a dislocation source at an applied stress about three times smaller than that needed to emit leading and trailing partials successively on the glide set plane. Once the partial dislocations in the glide set are emitted, they propagate faster than the shuffle set perfect dislocation at the same stress level.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Assessing carbon storage capacity and saturation across six central US grasslands using data–model integration

Abstract. Future global changes will impact carbon (C) fluxes and pools in most terrestrial ecosystems and the feedback of terrestrial carbon cycling to atmospheric CO2. Determining the vulnerability of C in ecosystems to future environmental change is thus vital for targeted land management and policy. The C capacity of an ecosystem is a function of its C inputs (e.g., net primary productivity – NPP) and how long C remains in the system before being respired back to the atmosphere. The proportion of C capacity currently stored by an ecosystem (i.e., its C saturation) provides information about the potential for long-term C pools to be altered by environmental and land management regimes. We estimated C capacity, C saturation, NPP, and ecosystem C residence time in six US grasslands spanning temperature and precipitation gradients by integrating high temporal resolution C pool and flux data with a process-based C model. As expected, NPP across grasslands was strongly correlated with mean annual precipitation (MAP), yet C residence time was not related to MAP or mean annual temperature (MAT). We link soil temperature, soil moisture, and inherent C turnover rates (potentially due to microbial function and tissue quality) as determinants of carbon residence time. Overall, we found that intermediates between extremes in moisture and temperature had low C saturation, indicating that C in these grasslands may trend upwards and be buffered against global change impacts. Hot and dry grasslands had greatest C saturation due to both small C inputs through NPP and high C turnover rates during soil moisture conditions favorable for microbial activity. Additionally, leaching of soil C during monsoon events may lead to C loss. C saturation was also high in tallgrass prairie due to frequent fire that reduced inputs of aboveground plant material. Accordingly, we suggest that both hot, dry ecosystems and those frequently disturbed should be subject to careful land management and policy decisions to prevent losses of C stored in these systems.

58 GEOSCIENCES↗
NASA NTRS1972

The atmosphere of Mars from Mariner 9 radio occultation measurements.

Mariner-9 S-band radio occultation measurements conducted during November and December 1971 are described in terms of new information that was obtained about the shape and atmosphere of Mars. The arrival of the spacecraft coincided with a severely obscuring global dust storm, and the effect of the dust in the atmosphere was reflected in the reduced temperature gradients that were measured in the daytime near-equatorial atmosphere, indicating (1) heating of the atmosphere by solar radiation absorbed by dust and (2) simultaneous cooling of the surface. In general, surface atmospheric pressures measured in the equatorial regions are in very good agreement with previous radio-occultation and earth-based measurements. A global disparity in pressures strongly suggests that the physical shape of Mars is more oblate than the shape of its gravitational equipotential surface.

Kliore, A. J.↗
DOE OSTI2020

Building thermal load prediction through shallow machine learning and deep learning

Building thermal load prediction informs the optimization of cooling plant and thermal energy storage. Physics-based prediction models of building thermal load are constrained by the model and input complexity. In this study, we developed 12 data-driven models (7 shallow learning, 2 deep learning, and 3 heuristic methods) to predict building thermal load and compared shallow machine learning and deep learning. The 12 prediction models were compared with the measured cooling demand. It was found XGBoost (Extreme Gradient Boost) and LSTM (Long Short Term Memory) provided the most accurate load prediction in the shallow and deep learning category, and both outperformed the best baseline model, which uses the previous day's data for prediction. Then, we discussed how the prediction horizon and input uncertainty would influence the load prediction accuracy. Major conclusions are twofold: first, LSTM performs well in short-term prediction (1 h ahead) but not in long term prediction (24 h ahead), because the sequential information becomes less relevant and accordingly not so useful when the prediction horizon is long. Second, the presence of weather forecast uncertainty deteriorates XGBoost's accuracy and favors LSTM, because the sequential information makes the model more robust to input uncertainty. Training the model with the uncertain rather than accurate weather data could enhance the model's robustness. Finally, our findings have two implications for practice. First, LSTM is recommended for short-term load prediction given that weather forecast uncertainty is unavoidable. Second, XGBoost is recommended for long term prediction, and the model should be trained with the presence of input uncertainty.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗