Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GROUND TRACK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Criteria for Side-Force Control in Air-to-Ground Target Acquisition and Tracking

A moving-base simulator experiment conducted at Ames Research Center demonstrated that a wings-level-turn control mode improved flying qualities for air-to-ground weapons delivery compared with those of a conventional aircraft. Evaluations of criteria for dynamic response for this system have shown that pilot ratings correlate well with equivalent time constant of the initial response and with system bandwidth. Ranges of this time constant, as well as digital-system transport delays and lateral-acceleration control authorities that encompassed level 1 through level 3 handling qualities, were determined.

Sammonds, Robert I.↗
NASA NTRS2015

Small Orbital Stereo Tracking Camera Technology Development

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well to help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Bryan, Tom↗
NASA NTRS2016

Small Orbital Stereo Tracking Camera Technology Development

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASA's Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Bryan, Tom↗
NASA NTRS2023

Distributed Ground Sensor Fusion Based Object Tracking for Autonomous Advanced Air Mobility Operations

Autonomous operations are a crucial aspect in the context of Advanced Air Mobility and other emerging aviation markets. In order to enable this autonomy, an accurate and detailed understanding of the positions of the various vehicles in the air is necessary. Full localization independent of on-board sensors makes the system suitable for noncooperative vehicles. This paper focuses on the object tracking part that relies on distributed ground-based sensor fusion, considering specific properties and limitations of different sensor types. Results show satisfactory performance in nominal scenarios with full coverage. Dropouts of individual sensors affect the accuracy of the tracking results, which agrees with expectations for partial coverage, when full localization is not achievable anymore. Finally, a study is performed to identify which parameters have the largest impact on the fit error.

Autonomous↗
NASA NTRSDate not supplied

Development and Field Test Results of Distributed Ground Sensor Fusion Based Object Tracking

Autonomous operations are a crucial aspect in the context of Advanced Air Mobility and other emerging aviation markets. In order to enable this autonomy, an accurate and detailed understanding of the positions of the various vehicles in the air is necessary. Full localization independent of on-board sensors makes the system suitable for noncooperative vehicles. This paper focuses on the object tracking part that relies on distributed ground-based RF and other sensor fusion, considering specific properties and limitations of different sensor types. Results show satisfactory performance in nominal scenarios with full coverage for some sensor types, but RF signals are challenging because of their nature. This paper includes the results from simulations as well as field tests to support the observations and conclusions.

sensor fusion↗
NASA NTRS1973

Results of Mariner Mars tracking calibration experiment

Ground station network S-band tracking in three-way Doppler modes of Mariner 9 in deep space provided geodetic parameters with an accuracy of 15 meters for use in Apollo 16 and Apollo 17 programs. It was concluded that unified S-band Doppler data provide geodetic results with accuracies comparable to laser ranging data.

Ryan, J. W.↗
NASA NTRS2010

Preliminary Design of the Guidance, Navigation, and Control System of the Altair Lunar Lander

Guidance, Navigation, and Control (GN&C) is the measurement and control of spacecraft position, velocity, and attitude in support of mission objectives. This paper provides an overview of a preliminary design of the GN&C system of the Lunar Lander Altair. Key functions performed by the GN&C system in various mission phases will first be described. A set of placeholder GN&C sensors that is needed to support these functions is next described. To meet Crew safety requirements, there must be high degrees of redundancy in the selected sensor configuration. Two sets of thrusters, one on the Ascent Module (AM) and the other on the Descent Module (DM), will be used by the GN&C system. The DM thrusters will be used, among other purposes, to perform course correction burns during the Trans-lunar Coast. The AM thrusters will be used, among other purposes, to perform precise angular and translational controls of the ascent module in order to dock the ascent module with Orion. Navigation is the process of measurement and control of the spacecraft's "state" (both the position and velocity vectors of the spacecraft). Tracking data from the Earth-Based Ground System (tracking antennas) as well as data from onboard optical sensors will be used to estimate the vehicle state. A driving navigation requirement is to land Altair on the Moon with a landing accuracy that is better than 1 km (radial 95%). Preliminary performance of the Altair GN&C design, relative to this and other navigation requirements, will be given. Guidance is the onboard process that uses the estimated state vector, crew inputs, and pre-computed reference trajectories to guide both the rotational and the translational motions of the spacecraft during powered flight phases. Design objectives of reference trajectories for various mission phases vary. For example, the reference trajectory for the descent "approach" phase (the last 3-4 minutes before touchdown) will sacrifice fuel utilization efficiency in order to provide landing site visibility for both the crew and the terrain hazard detection sensor system. One output of Guidance is the steering angle commands sent to the 2 degree-of-freedom (dof) gimbal actuation system of the descent engine. The engine gimbal actuation system is controlled by a Thrust Vector Control algorithm that is designed taking into account the large quantities of sloshing liquids in tanks mounted on Altair. In this early design phase of Altair, the GN&C system is described only briefly in this paper and the emphasis is on the GN&C architecture (that is still evolving). Multiple companion papers will provide details that are related to navigation, optical navigation, guidance, fuel sloshing, rendezvous and docking, machine-pilot interactions, and others. The similarities and differences of GN&C designs for Lunar and Mars landers are briefly compared.

Lee, Allan Y.↗
NASA NTRS1972

Earth orbit navigation study. Volume 2: System evaluation

An overall systems evaluation was made of five candidate navigation systems in support of earth orbit missions. The five systems were horizon sensor system, unkown landmark tracking system, ground transponder system, manned space flight network, and tracking and data relay satellite system. Two reference missions were chosen: a low earth orbit mission and a transfer trajectory mission from low earth orbit to geosynchronous orbit. The specific areas addressed in the evaluation were performance, multifunction utilization, system mechanization, and cost.

Source record↗
NASA NTRS1994

SATS: Small, Automated Tracking System - - Elements of a Better System for Satellite Tracking and Telemetry

JPL has been exploring applications of precise Global Positioning System (GPS) techniques to navigation and data communication for Earth orbiting spacecraft. GPS tracking can be exploited in several different ways, depending on the orbital altitude of the spacecraft of interest, to support orbit and trajectory determination. At low-Earth orbits below 3000 km, 'upwards-looking' GPS tracking analogous to ground-based GPS tracking can be used to provide real-time orbit determination for navigation. At Earth orbiting altitudes between 3000 km and 8000 km, visibility of GPS rapidly decreases and it becomes advantageous to add a nadir pointing antenna in order to continuously see enough GPS signals to navigate an orbiter. For orbits above 8000 km, JPL has developed the GPS-like tracking (GLT) technique which dispenses with the on-board GPS receiver in favor of a transmitting beacon whose phase is tracked, simultaneously with normal GPS signals, by a ground network of 'enhanced' GPS receivers. The systems referred to above all have the potential to provide inexpensive and autonomous navigation/orbit production and, in some cases, integrated data communication for a wide class of Earth orbiters and should be of interest to designers of NASA, military, and commercial space systems.

GPS Global Positioning System navigation spacecraf↗
NASA NTRS1981

NASA tracking and data acquisition in the 1990s - High earth orbit and planetary spacecraft support

It is pointed out that during the decade of the 1980's the Deep Space Network (DSN) and the ground stations of the Ground Spaceflight Tracking Data Network (GSTDN) will have been consolidated into one ground-based network to provide services for tracking and data acquisition for NASA deep space probes and highly elliptical earth orbiters. The Tracking and Data Relay Satellite System (TDRSS) will have been implemented to handle low earth orbiters. Anticipated solar system exploration missions of the 1990's are discussed, and a description is presented of the new tracking and data acquisition requirements for supporting these missions. The technology options needed to meet these new requirements are identified, and the impact of these technology options on the consolidated DSN is discussed. Attention is given to the evolution of the DSN of the 1980's into the DSN of the year 2000.

Smith, J. G.↗
NASA NTRS1984

TDRSS tracking data and orbit determination evaluation

TDRS-1 was launched on April 4, 1983. This paper presents preliminary results of TDRSS tracking data evaluation through September 1983. TDRSS tracking data evaluation is a summary of valid tracking data that characterizes data quality. TDRS-1 orbit accuracy is evaluated by using orbit consistency measured by comparing overlaps of TDRS-1 ephemerides produced from consecutive data arcs. TDRS-1 and user orbit accuracies and consistencies are also estimated. Orbit accuracy is estimated by comparing user orbits based on tracking data obtained both through the TDRSS and from ground-based tracking.

Campion, R. E.↗
NASA NTRS2007

A Jitter-Mitigating High Gain Antenna Pointing Algorithm for the Solar Dynamics Observatory

This paper details a High Gain Antenna (HGA) pointing algorithm which mitigates jitter during the motion of the antennas on the Solar Dynamics Observatory (SDO) spacecraft. SDO has two HGAs which point towards the Earth and send data to a ground station at a high rate. These antennas are required to track the ground station during the spacecraft Inertial and Science modes, which include periods of inertial Sunpointing as well as calibration slews. The HGAs also experience handoff seasons, where the antennas trade off between pointing at the ground station and pointing away from the Earth. The science instruments on SDO require fine Sun pointing and have a very low jitter tolerance. Analysis showed that the nominal tracking and slewing motions of the antennas cause enough jitter to exceed the HGA portion of the jitter budget. The HGA pointing control algorithm was expanded from its original form as a means to mitigate the jitter.

Bourkland, Kristin L.↗
NASA NTRS1980

Determination of the geopotential from satellite-to-satellite tracking data

Ground-based observation of the deviation of artificial satellite trajectories from a reference path is the classical means for determining the parameters of the global geopotential. However, for the short wavelengths (less than 10 deg), tracking coverage from ground stations of sufficient density is impossible to obtain. But one or more satellites can observe another satellite and obtain the needed global data coverage. Results are presented of error analyses of possible satellite-to-satellite tracking missions to determine the geopotential at a resolution of 1 x 1 deg. To achieve an accuracy of a few milligals at this resolution requires a satellite altitude at or near 150 km and measurements of intersatellite speed to 10 to the -6th m/s.

Douglas, B. C.↗
NASA NTRS1991

Graphical Planning Of Spacecraft Missions

Mission Planning Graphical Tool (MPGT) computer program provides analysts with graphical representations of spacecraft and environmental data used in planning missions. Designed to be generic software tool configured to analyze any specified Earth-orbiting spacecraft mission. Data presented as series of overlays on top of two-dimensional or three-dimensional projection of Earth. Includes spacecraft-orbit tracks, ground-station-antenna masks, solar and lunar ephemerides, and coverage by Tracking Data and Relay Satellite System (TDRSS). From graphical representations, analyst determines such spacecraft-related constraints as communication coverage, infringement upon zones of interference, availability of sunlight, and visibility of targets to instruments.

Jeletic, J. F.↗