Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight Plan”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Apollo Telescope Mount experiments technology

The Skylab Apollo Telescope Mount (ATM) experiments, consisting of a white light coronagraph, four ultraviolet instruments, two X-ray telescopes and two hydrogen-alpha telescopes, observed the sun daily for nine solar rotations. The results have only begun to be evaluated, but is is already apparent that many theories of solar physics will undergo significant revisions as results are further developed. The ATM instruments were individually larger, more complex, and provided better spatial resolution than previous solar satellite instruments. An additional major advantage of the telescope complex was its ability to simultaneously collect multispectral data for specific experiments. A description of the Skylab, the ATM and the ATM experiments will be given. The daily process of flight planning and execution will be described. Examples of scientific data and some preliminary findings will be presented.

Keathley, W. C.↗

Overcoming two significant hurdles to space power generation Transportation and assembly

The design of large, space-based power generation satellites is strongly influenced by the transportation modes available and the assembly methods adopted. Flight plans for assembly are explored using the Space Shuttle as the transport vehicle. Future heavy-lift launch systems are postulated, and their impact on assembly cost of operational Solar Satellite Power Stations (SSPS) presented. Sensitivity to various levels of ground detail parts prefabrication are compared to corresponding levels of orbital fabrication. Assumptions concerning the degree of human skills are outlined, and related to the method of assembly. Cost comparisons and recommendations for continued studies are developed.

Kline, R.↗

Investigation of the use of an electronic multifunction display and an electromechanical horizontal situation indicator for guidance and control of powered-lift short-haul aircraft

The use which pilots make of a moving map display from en route through the terminal area and including the approach and go-around flight phases was investigated. The content and function of each of three primary STOLAND displays are reviewed from an operational point of view. The primary displays are the electronic attitude director indicator (EADI), the horizontal situation indicator (HSI), and the multifunction display (MFD). Manually controlled flight with both flight director guidance and raw situation data is examined in detail in a simulated flight experiment with emphasis on tracking reference flight plans and maintaining geographic orientation after missed approaches. Eye-point-of-regard and workload measurements, coupled with task performance measurements, pilot opinion ratings, and pilot comments are presented. The experimental program was designed to offer a systematic objective and subjective comparison of pilots' use of the moving map MFD in conjunction with the other displays.

Clement, W. F.↗

Space shuttle orbiter test flight series

The proposed studies on the space shuttle orbiter test taxi runs and captive flight tests were set forth. The orbiter test flights, the approach and landing tests (ALT), and the ground vibration tests were cited. Free flight plans, the space shuttle ALT crews, and 747 carrier aircraft crew were considered.

Garrett, D.↗

STS payloads mission control study phase A-1, volume 1, phases A and A-1

The Space Transportation System (STS) Payloads Mission Control Phase A-1 Study results are summarized. The composite resources required to accomplish Joint STS-Payload preflight preparation for joint flight operations, including flight planning, training, and simulations are presented. The Standard Payload Operations Control Center (POCC) concept was developed.

Source record↗

Interactive LORAN-C to geographic and geographic-to-LORAN-C computation

The LORAN program is stored in CMS disk files for use by Avionics Engineering Center terminal users. A CMS EXEC file named LORAN controls program operation. The user types LORAN and the program then prompts for data input and produces output on the terminal. The FORTRAN program refers to a disk file of LORAN master data giving station locations, coding delays, repetition rate and station pair identification letters. For Geographic-to-LORAN conversion, no iterative computations are required; the program is a straightforward coordinate conversion based upon the techniques described by the Navy. For LORAN-to-Geographic conversion, the original Navy program required a dead-reckoned position, near the actual unknown fix, to begin computations. No iteration was performed to obtain the LORAN fix, but internal program errors occurred at execution time if the dead-reckoned fix were displaced from the actual fix by more than a few minutes of latitude or longitude. In order to enhance usefulness of the program for the terminal user, an iterative routine was added which allows a single dead-reckoned position to be entered from the master data file for each LORAN chain. The results compare exactly with the LORAN-C navigation chart, and provide adequate benchmark data for general aviation flight planning and data analysis.

Piecuch, L. M.↗

Spacelab payloads

The various payloads planned for Spacelab are discussed with emphasis on the experimental objectives of the payload, the state of planning or development, and the planned flight schedule. Attention is given to payloads involving life sciences, atmospheric and space physics, infrared astronomy, solar physics, ultraviolet/optical astronomy, and high energy astrophysics.

Sharp, G. W.↗

Survey: Federal Aviation Administration National Communication Center

The National Communication (NATCOM) Center (commonly known as the FAA Weather Message Switching Center), is a Federal Aviation Administration (FAA) facility with responsibility for providing communication switching services to the National Weather Service (NWS), the FAA, commercial and private flight organizations under the auspices of the FAA, and DoD. Data handled by NATCOM include weather data, flight plans, and Notices to Airmen (NOTAMS) on both national and international networks. The communications and data management functions are handled through four computer-controlled communication networks designated as WMSC, AFTN, A-BDIS, and NASNET. The functions of these networks are discussed with emphasis on those networks that support the different elements of the NWS. The primary network of concern to NASA, the WMSC (Weather Message Switching Center) network, performs approximately 60 percent of its work for the NWS, 20 percent for the State Department, and 20 percent for the FAA. This document discusses the current and future systems capabilities and workload of NATCOM in terms of new roles.

Source record↗

CF6 jet engine performance deterioration results

The use of the performance baseline from the flight planning manual as a reference to measure changes in cruise fuel flow rates was discussed. For the CF6-6D engine, the introduction of design changes for performance and durability reasons was seen to introduce an average increment relative to this baseline of 3.2% WFM increase at Nl, 2.5% Fn increase at Nl, 0.8% specific fuel consumption (SFC) increase at Fn, and 7 C EGT increase at Nl, while maintaining sufficient SFC margin of the delivered airplane. The effect of revenue service deterioration and performance restoration relative to the reference was shown to be an adder on top of these design effects. A schematic of typical CF6-6D performance through revenue service and airline maintenance is presented in terms of percent cruise SFC relative to an airline datum point (average level upon entering revenue service). The typical changes in SFC margin are shown for airline revenue service through for installations and refurbishments.

Lewis, R. J.↗

Determination of launch conditions for Spacelab satisfying the constraints of an absorption spectroscopy project

The conditions for absorption spectroscopy of the homosphere between 20 and 100 km from a space platform such as Spacelab are considered. Using nominal orbital elements, and taking launch data and time as parameters of the problem, formula were established that give the data necessary for determining the flight plan. The geographical coordinates of the tangential points of the solar illumination boundaries were also calculated. It is shown that the latitude coverage of the observation is closely related to launch conditions. Expressions for the pointing angles referred to an instantaneous terrestrial trihedron are given. These angular elements are needed to determine the real pointing angles in a reference system linked to Spacelab.

Vercheval, J.↗

Ozone contamination in aircraft cabins: Objectives and approach

Three panels were developed to solve the problem of ozone contamination in aircraft cabins. The problem is defined from direct in-flight measurements of ozone concentrations inside and outside airliners in their normal operations. Solutions to the cabin ozone problem are discussed under two areas: (1) flight planning to avoid high ozone concentrations, and (2) ozone destruction techniques installed in the cabin air systems.

Perkins, P. J.↗

Meteorological and operational aspects of 46 clear air turbulence sampling missions with an instrument B-57B aircraft. Volume 1: Program summary

The results of 46 clear air turbulence (CAT) probing missions conducted with an extensively instrumented B-57B aircraft are summarized. Turbulence samples were obtained under diverse conditions including mountain waves, jet streams, upper level fronts and troughs, and low altitude mechanical and thermal turbulence. CAT was encouraged on 20 flights comprising 77 data runs. In all, approximately 4335 km were flown in light turbulence, 1415 km in moderate turbulence, and 255 km in severe turbulence during the program. The flight planning, operations, and turbulence forecasting aspects conducted with the B-57B aircraft are presented.

Davis, R. E.↗

NASA selects 40 investigations for Spacelab/shuttle flights

Seven experiments proposed by scientists in Belgium, Canada, France, and Japan were chosen, along with 33 investigations from the United States, to be studied and developed for a series of shuttle flights planned for the period between 1983 and 1985. The cost of the U.S. effort is expected to total about $100 million over the next five-year period. The foreign countries will fund their own investigations. The disciplines involved are astronomy, upper atmospheric physics, solar physics, and high energy astrophysics. A list of the investigators, the organizations they represent, and the names of the experiments is included.

Source record↗

IUS solid rocket motor contamination prediction methods

A series of computer codes were developed to predict solid rocket motor produced contamination to spacecraft sensitive surfaces. Subscale and flight test data have confirmed some of the analytical results. Application of the analysis tools to a typical spacecraft has provided early identification of potential spacecraft contamination problems and provided insight into their solution; e.g., flight plan modifications, plume or outgassing shields and/or contamination covers.

Mullen, C. R.↗