Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “First order phase transitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Studies of Nucleation and Growth, Specific Heat and Viscosity of Undercooled Melts of Quasicrystal and Polytetrahedral-Phase Forming Alloys

From extensive ground based work on the phase diagram and undercooling studies of Ti-Zr-Ni alloys, have clearly identified the composition of three different phases with progressively increasing polytetrahedral order such as, (Ti/Zr), the C14 Laves phase, and the i-phase, that nucleate directly from the undercooled liquid. The reduced undercooling decreases progressively with increasing polytetrahedral order in the solid, supporting Frank s hypothesis. A new facility for direct measurements of the structures and phase transitions in undercooled liquids (BESL) was developed and has provided direct proof of the primary nucleation of a metastable icosahedral phase in some Ti-Zr-Ni alloys. The first measurements of specific heat and viscosity in the undercooled liquid of this alloy system have been completed. Other than the importance of thermo-physical properties for modeling nucleation and growth processes in these materials, these studies have also revealed some interesting new results (such as a maximum of C(sup q, sub p) in the undercooled state). These ground-based results have clearly established the necessary background and the need for conducting benchmark nucleation experiments at the ISS on this alloy system.

Kelton, K. F.↗

Competing magnetic phases in Li-Fe-Ge kagome systems

Competing interlayer magnetic interactions in kagome magnets can lead to diverse magnetic phases, which enable promising topological or quantum material properties. In this work, the electronic structure and magnetic properties are studied using first-principles calculations for the Li⁢Fe6⁢G⁡e6, Li⁢Fe6⁢G⁡e4, and Li⁢Fe6⁢G⁡e5 compounds sharing the kagome F⁡e3⁢Ge layer motif but with different interlayer arrangements. For Li⁢Fe6⁢G⁡e4 and Li⁢Fe6⁢G⁡e5, the predicted magnetic ground states are collinear antiferromagnetic (AFM) states involving a mix of ferromagnetic (FM) and AFM interlayer orientations. In contrast, for Li⁢Fe6⁢G⁡e6, an incommensurate cycloidal spin spiral ground state is stabilized, although its energy is close to a collinear A-type AFM state. The analysis of magnetic RKKY exchange coupling confirms the results of calculations. The values of atomic magnetic moments are in good agreement with existing experimental estimations. Our experiments on Li⁢Fe6⁢G⁡e6 single crystals reveals AFM ordering at ∼540 K and transition to another magnetic phase with a small FM component, possibly with spin canting, below ∼270 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principles Phonon Quasiparticle Theory Applied to a Strongly Anharmonic Halide Perovskite

Understanding and predicting lattice dynamics in strongly anharmonic crystals is one of the long-standing challenges in condensed matter physics. Here we propose a first-principles method that gives accurate quasiparticle (QP) peaks of the phonon spectrum with strong anharmonic broadening. On top of the conventional first-order self-consistent phonon (SC1) dynamical matrix, the proposed method incorporates frequency renormalization effects by the bubble self-energy within the QP approximation. We apply the developed methodology to the strongly anharmonic α-CsPbBr 3 that displays phonon instability within the harmonic approximation in the whole Brillouin zone. While the SC1 theory significantly underestimates the cubic-to-tetragonal phase transition temperature (T c ) by more than 50%, we show that our approach yields T c = 404–423 K, in excellent agreement with the experimental value of 403 K. Furthermore, we also demonstrate that an accurate determination of QP peaks is paramount for quantitative prediction and elucidation of phonon linewidth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Symmetry instability induced by topological phase transitions

The symmetry-topology interplay dictates how to define order parameters and classify material ordered phases. However, current understanding of this interplay has been predominately approached from a one-sided perspective, with topological states being classified within the constraints imposed by specific fixed symmetries. Here, in this study, we complete this full circle by demonstrating spontaneous symmetry breaking that results from a periodic alteration of topological phases induced by light in a centrosymmetric Dirac material ZrTe 5 . The distinguishing feature is the observation of robust correlation and striking anomalies in the fluence and temperature dependence of key transport parameters. First, both shift current 𝐽 𝑠 and displacement current 𝐽 𝑑 , arising from interband transition and infrared phonon driving, respectively, along with charge carrier pumping, exhibit similar behaviors. Second, they all peak at similar low pump fluence, followed by a subsequent reduction as the fluence further increases. This behavior cannot be explained by conventional energetically allowed, direct excitations. Third, all the three observables exhibit anomalies when they approach the topological phase transition temperature. These results highlight the unique low-energy pumping behaviors in ZrTe 5 , characterized by reversible fluence dependence and a “hinge-like” interaction that connects various electronic and lattice observables, including phonons, charge carriers, and currents. Our findings, supported by model analysis, provide key insights into the fragility of crystalline (inversion) and time-reversal symmetries during the dynamics of topological phase transitions. This fragility drives spontaneous symmetry breaking, evidenced by the synchronized emergence of off-resonant infrared phonons and broken-symmetry photocurrents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Importance of Nonequilibrium to Equilibrium Transition Pathways for the Efficiency and Stability of Organic Solar Cells

Controlled morphology of solution-processed thin films have realized impressive achievements for non-fullerene acceptor (NFA)–based organic solar cells (OSCs). Given the large set of donor–acceptor pairs, employing various processing conditions to realize optimal morphology for high efficiency and stable OSCs is a strenuous task. Therefore, comprehensive correlations between processing conditions and morphology evolution pathways have to be developed for efficient performance and stability of devices. Within the framework of the blend system, crystallization transitions of NFA molecules are tracked utilizing the first heating scan of differential scanning calorimeter (DSC) measurement correlating with respective morphology evolution of blend films. Real-time dynamics measurements and morphology characterizations are combined to provide optimal morphology transition pathways as NFA molecules are shown to be released from the mixed phase to form balanced ordered packing with variant processing conditions. Polymer:NFA films are fabricated using blade coating incorporating solvent additive or thermal annealing as processing conditions as a correlation is formulated between performance and stability of solar cells with morphology transition pathways. In conclusion, this work demonstrates the significance of processing condition-controlled transition pathways for the realization of optimal morphology leading to superior OSC devices.

14 SOLAR ENERGY↗

Magnetic properties of the quasi-one-dimensional S = 1 spin chain antiferromagnet BaNi Te 2 O 7

We report a quasi-one-dimensional S=1 spin chain compound BaNiTe 2 O 7 . This magnetic system has been investigated by magnetic susceptibility, specific heat, and neutron powder diffraction. These results indicate that BaNiTe 2 O 7 develops a short-range magnetic correlation around T ~ 22K. With further cooling, an antiferromagnetic phase transition is observed at T N ~ 5.4K. Neutron powder diffraction revealed antiferromagnetic noncollinear order with a commensurate propagation vector k = (1/2,1,0). The refined magnetic moment size of Ni 2+ at 1.5 K is 1.84 μB , and its noncollinear spin texture is confirmed by first-principles calculations. In conclusion, inelastic neutron-scattering results and density functional theory calculations confirmed the quasi-one-dimensional nature of the spin systems.

1-dimensional spin chains↗

Magnetic dilution effect and topological phase transitions in (Mn 1- x Pb x )Bi 2 Te 4

We report, as the first intrinsic antiferromagnetic topological insulator, MnBi 2 Te 4 has provided a material platform to realize various emergent phenomena arising from the interplay of magnetism and band topology. Here, by investigating (Mn 1-x Pb x )Bi 2 Te 4 (0 ≤ x ≤ 0.82) single crystals via the x-ray, electrical transport, magnetometry and neutron measurements, chemical analysis, external pressure, and first-principles calculations, we reveal the magnetic dilution effect on the magnetism and band topology in MnBi 2 Te 4 . With increasing x, both lattice parameters a and c expand linearly by around 2%. All samples undergo the paramagnetic to A-type antiferromagnetic transition with the Néel temperature decreasing lineally from 24 K at x = 0 to 2 K at x = 0.82. Our neutron data refinement of the x = 0.37 sample indicates that the ordered moment is 4.3(1)μ B /Mn at 4.85 K and the amount of the Mn Bi antisites is negligible within the error bars. Isothermal magnetization data reveal a slight decrease of the interlayer plane-plane antiferromagnetic exchange interaction and a monotonic decrease of the magnetic anisotropy due to diluting magnetic ions and enlarging the unit cell. For x = 0.37, the application of external pressures enhances the interlayer antiferromagnetic coupling, boosting the Néel temperature at a rate of 1.4 K/GPa and the saturation field at a rate of 1.8 T/GPa. Furthermore, our first-principles calculations reveal that the band inversion in the two end materials, MnBi 2 Te 4 and PbBi 2 Te 4 , occurs at the Γ and Z point, respectively, while two gapless points appear at x = 0.44 and x = 0.66, suggesting possible topological phase transitions with doping.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of lithium ordering with (de)-lithiation in β-LiVOPO 4 : insights through solid-state NMR and first principles DFT calculations

The lithium-ion battery cathode material β-VOPO 4 is capable of intercalating more than one Li ion per transition metal ion due to the accessibility of both the V 5+ /V 4+ and V 4+ /V 3+ redox couples at ~4.5 V and ~2.3 V vs. Li, respectively, giving a theoretical capacity greater than ~300 mA h g -1 . The ability to perform full and reversible two Li-ion intercalation in this material, however, has been a matter of debate and the poor crystallinity of the fully lithiated phase has thus far precluded its complete structural characterisation by conventional diffraction-based methods. In this work, 7 Li and 31 P NMR spectroscopy, in combination with first principles DFT calculations, indicate that chemical lithiation results in a single phase β-Li 2 VOPO 4 exhibiting a complex Li ordering scheme with lithium ions occupying multiple disordered environments. 2D NMR 7 Li correlation experiments were used to deduce the most likely Li ordering for the β-Li 2 VOPO 4 phase from amongst several DFT optimised structures. In contrast, electrochemically lithiated β-Li 2- x VOPO 4 discharged to 1.6 V exhibits, in addition to β-Li 2 VOPO 4 , a β-Li 1.5 VOPO 4 phase. Additionally, the existence of β-Li 1.5 VOPO 4 is not reflected in the flat galvanostatic charge and discharge curves nor is evident from diffraction-based methods due to the very close structural similarity between the β-Li 1.5 VOPO 4 phase and β-Li 2 VOPO 4 phases. We demonstrate that solid state NMR spectroscopy, in combination with DFT results, provides a powerful tool for identifying intermediate states formed during charge/discharge of these complex phosphates as these phases can be distinguished from the end member phases primarily by the nature of the lithium ordering.

25 ENERGY STORAGE↗

Complex-Concentrated Anion Doping Enables Ultra-Stable Lattice Oxygen and Structural Integrity in Lithium-Rich Layered Oxide Cathodes

Lithium- and manganese-rich layered oxides (LMR) stand out as next-generation lithium-ion cathode chemistries, which harness both transition-metal and lattice-oxygen redox processes to deliver exceptional capacity and energy density. However, their full potential is hindered by intrinsic oxygen instability and structural degradation, resulting in pronounced voltage fade and capacity decay. Here, we present a complex-concentrated anion-doping paradigm in which multiple anions, F, Br, and S, are incorporated into the oxygen sublattice to enhance oxygen-redox and structural stability. X-ray absorption spectroscopy and aberration-corrected scanning transmission electron microscopy confirm ultra-stable local oxygen coordination environments during long-term cycling, with detrimental phase transformations and oxygen-loss-induced cavitation dramatically inhibited. Notably, we show that the characteristic LiTM6 transition metal (TM) honeycomb ordering is preserved even after electrochemical cycling. Concurrently, this strategy yields an unprecedented volume change of only 0.63% upon charging to 4.8 V vs. Li+/Li, achieving the first zero-strain LMR cathode. The resulting LMR cathode delivers ultralow voltage fade (1 mV per cycle during the first 100 cycles and becomes negligible in subsequent cycles) and outstanding energy retention (93% after 200 cycles) in a pouch cell configuration. Our complex-concentrated anion-doping concept establishes a broadly applicable strategy for resolving chemo-mechanical failure mechanisms in ceramic intercalation electrodes for next-generation energy storage.

Li-ion batteries↗

Strange quark matter as dark matter: 40 yr later, a reappraisal

ABSTRACT Forty years ago Witten suggested that dark matter could be composed of macroscopic clusters of strange quark matter. This idea was very popular for several years, but it dropped out of fashion once lattice quantum chromodynamics calculations indicated that the confinement/deconfinement transition, at small baryonic chemical potential, is not first order, which seemed to be a crucial requirement in order to produce large clusters of quarks. Here, we revisit the conditions under which strangelets can be produced in the Early Universe. We discuss the impact of an instability in the hadronic phase separating a low density, positive-strange-charge phase from a high-density phase with a negative strange charge. This second phase can rapidly stabilize by forming colour-superconducting gaps. The strangelets then undergo partial evaporation. In this way, we obtain distributions of their sizes in agreement with the observational constraints and we discuss the many astrophysical and cosmological implications of these objects. Finally, we examine the most promising techniques to detect this type of strangelets. We also show that strangelets can exist with masses $\lesssim $1017 g, while primordial black holes are ruled out in that mass range, allowing us to distinguish between these two dark matter candidates.

Clemente, Francesco Di (ORCID:0000000282573819)↗

A dissipation-induced superradiant transition in a strontium cavity-QED system

Driven-dissipative many-body systems are ubiquitous in nature and a fundamental resource for quantum technologies. However, they are also complex and hard to model because they cannot be described by the standard tools in equilibrium statistical mechanics. Probing nonequilibrium critical phenomena in pristine setups can illuminate fresh perspectives on these systems. Here, we use an ensemble of cold 88 Sr atoms coupled to a driven high-finesse cavity to study the cooperative resonance fluorescence (CRF) model, a classic driven-dissipative model describing coherently driven dipoles superradiantly emitting light. We observe its nonequilibrium phase diagram characterized by a second-order phase transition. Below a critical drive strength, the atoms quickly reach the so-called superradiant steady state featuring a macroscopic dipole moment; above the critical point, the atoms undergo persistent Rabi-like oscillations. At longer times, spontaneous emission transforms the second-order transition into a discontinuous first-order transition. Our observations pave the way for harnessing robust entangled states and exploring boundary time crystals in driven-dissipative systems.

Science & Technology - Other Topics↗

Structure and magnetism across the Sr 2- x Ba x NiOsO 6 phase diagram: Understanding magnetic superexchange between first and third row transition metal ions

The crystal chemistry and magnetism of compositions in the Sr 2-x Ba x NiOsO 6 phase diagram have been investigated to better understand the superexchange interactions between 3d and 5d transition metal ions. Compositions with x ​< ​1.35 crystallize with the double perovskite structure, while those with x ​> ​1.83 crystallize in a trigonal structure that is a cation ordered variant of the 6H hexagonal perovskite structure. The Sr-rich double perovskites undergo a cubic to tetragonal distortion upon cooling that is driven by out-of-phase octahedral tilting. The tetragonal distortion occurs upon cooling below 650 ​K in Sr 2 NiOsO 6 . The temperature of this transition decreases as the barium content increases and is completely suppressed for x ​≥ ​1.2. All compositions in the double perovskite region become spin glasses below T g ​≈ ​40 ​K, due to the competition between ferromagnetic Ni–Os and antiferromagnetic Ni–Ni and Os–Os superexchange interactions. The double perovskite compositions that are rich in barium, like Sr 0.8 Ba 1.2 NiOsO 6 show some signs of magnetic ordering in small clusters, but the presence of Ba/Sr disorder inhibits long-range magnetic order. Trigonal Ba 2 NiOsO 6 orders ferrimagnetically below T C ​= ​108 ​K. In conclusion, the magnetic structure of this compound contains ferromagnetic ~180° Ni–O–Os interactions and antiferromagnetic ~90° Ni–O–Os interactions, both in agreement with the Goodenough-Kanamori rules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revisiting Structural and Electromechanical Properties of the Lead-free (K,Na)NbO 3 High-Piezoelectric Material

Having lead-free systems with excellent piezoelectric responses is crucial to the development of environmentally friendly electromechanical applications. In this work, we build an effective Hamiltonian model to explore the promising (K x Na 1–x )NbO 3 system, whose rich phase diagram near x = 50% remains poorly understood meanwhile exhibiting a colossal effective piezoelectric response. Thanks to the numerical implementation of this effective Hamiltonian scheme into a Monte Carlo Metropolis algorithm, we reveal striking features. First, a long-period state can be the ground state at low temperatures for some concentrations while only a short-period conventional polar ground state exists for larger x. Second, the electric field-driven transformation, via a first-order transition, of this long-period state into a short-period polar state creates large electromechanical strains (on the order of the percent) and is likely the origin of the colossal piezoelectric response reported in KNN, for which we evaluate an effective piezoelectric coefficient of several thousands of pC/N.

(K,Na)NbO3↗

Electronic properties of epitaxial La 1- x Sr x RhO 3 thin films

Here, we report on the synthesis and electronic properties of epitaxial perovskite La 1- x Sr x RhO 3 thin films. Thin films with a Sr content ranging from $\textit{x}$ = 0 to 0.5 have been grown using molecular beam epitaxy. Transport and x-ray photoemission spectroscopy data reveal an insulator-metal-insulator transition, accompanied by a $\textit{p-}$ to $\textit{n}-$ type carrier change observed in Hall measurements. Combined with theoretical calculations, we find that the addition of Sr does not directly dope carriers into the conduction band, but rather induces localized Rh 4$\textit{d}$ states within the LaRhO 3 band gap. The bandwidth of the impurity band increases with Sr content, eventually causing the valence band (VB) and the localized Rh 4$\textit{d}$ band to overlap, which explains the first insulator-to-metal transition occurring at $\textit{x}$ = 0.35. For Sr content $\textit{x}$ > 0.4, possible cation ordering results in an increase of the gap between the VB and the Rh 4$\textit{d}$ band, leading to the second metal-to-insulator transition. We map out the electronic phase diagram of the Sr-doped LaRhO 3 system and suggest strategies to engineer the electronic states in rhodate systems via delocalizing the Rh 3+ states.

36 MATERIALS SCIENCE↗

Intercalated chalcogenides Fe 1/4 TaS 2 and Fe 1/3 TaS 2 under extreme pressure—temperature conditions

Intercalation is an important strategy for enhancing functionality in complex chalcogenides. This is because layered materials can be endowed with intriguing properties by filling the van der Waals gap with various ions and molecules, which, in addition to their unique chemistry, break symmetry in new ways. In order to explore the properties of intercalated metal dichalcogenides under extreme pressure-temperature conditions, we combine diamond anvil cell techniques, Raman scattering spectroscopy, magnetic susceptibility, and first-principles calculations to reveal the pressure–temperature phase diagram of Fe 1/3 TaS 2 . This system hosts a compression-driven structural phase transition to a polar state as well as remnant charge density wave signatures deriving from the host lamella of the 2H-parent compound. We also explore the role of different A-site patterns and determine that, by comparison, Fe 1/4 TaS 2 is soft and flexible due to the lower metal density inside the van der Waals gap. These findings open the door to entirely new states of matter with exciting property combinations, including metallicity, polarity, chirality, and altermagnetism – depending upon the conditions – that can support a wide range of spintronics and phononics applications.

Materials science↗

Geometry, Disorder and Phase Transitions in Topological States of Matter

The quantum Hall effect is the birthplace of topological states of matter, a major theme at the forefront of condensed matter physics in the past two decades. The fractional quantum Hall (FQH) effect revolutionized our understanding of phases of electronic matter. FQH states support exotic fractionally charged excitations that obey Abelian or non-Abelian fractional statistics, which are topological excitations that result from the underlying topological order. During this project, our group discovered a previously unrecognized geometric degree of freedom of incompressible FQH states and studied that for a variety of gapped FQH states. We brought this new concept into direct contact with experiments for the first time by generalizing it to Fermi-liquid states of composite fermions. Using the newly formulated powerful infinite Density Matrix Renormalization Group method, our numerical calculations yielded a parameter free prediction that was found to be in excellent agreement with experimental findings on electron systems in semiconductor heterostructures. In parallel, we performed extensive numerical studies on different, competing phases at various Landau level filling factors, and quantum phase transitions that result from such a competition, e.g. Abelian-non-Abelian phase transitions in bilayer systems. We studied geometrical excitations dubbed “gravitons” (because of their analogy with excitations in the theory of gravitation) and ways to excite and detect them, and explored how they couple with topological excitations. In graphene-based chiral materials, we realized the ability to tune through different incompressible and compressible states in a single Landau level, and found appropriate experimental parameters for the exploration of universal Luttinger liquid behavior not obtained in semiconductor-based electron systems. We showed that topological systems had a very different response from nontopological systems to strong disorder (many-body localization) as well as periodic drives.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Discovery of Charge Order in the Transition Metal Dichalcogenide Fe x NbS 2

The Fe intercalated transition metal dichalcogenide (TMD), Fe 1/3 NbS 2 , exhibits remarkable resistance switching properties and highly tunable spin ordering phases due to magnetic defects. We conduct synchrotron x-ray scattering measurements on both underintercalated ( x = 0.32 ) and overintercalated ( x = 0.35 ) samples. We discover a new charge order phase in the overintercalated sample, where the excess Fe atoms lead to a zigzag antiferromagnetic order. The agreement between the charge and magnetic ordering temperatures, as well as their intensity relationship, suggests a strong magnetoelastic coupling as the mechanism for the charge ordering. In conclusion, our results reveal the first example of a charge order phase among the intercalated TMD family and demonstrate the ability to stabilize charge modulation by introducing electronic correlations, where the charge order is absent in bulk 2H - NbS 2 compared to other pristine TMDs.

36 MATERIALS SCIENCE↗

Cosmic strings and ultra-high energy cosmic rays

The flux is calculated of ultrahigh energy protons due to the process of cusp evaporation from cosmic string loops. For the standard value of the dimensionless cosmic string parameter epsilon is identical to G(sub mu) approx. = 10(exp -6), the flux is several orders of magnitude below the observed cosmic ray flux of ultrahigh energy protons. However, the flux at any energy initially increases as the value of epsilon is decreased. This at first suggests that there may be a lower limit on the value of epsilon, which would imply a lower limit on the temperature of a cosmic string forming phase transition in the early universe. However, the calculation shows that this is not the case -- the particle flux at any energy reaches its highest value at epsilon approx. = 10(exp -15) and it then decreases for further decrease of the value of epsilon. This is due to the fact that for too small values of epsilon (less than 10(exp -15)), the energy loss of the loops through the cusp evaporation process itself (rather than gravitational energy loss of the loops) becomes the dominant factor that controls the behavior of the number density of the loops at the relevant times of emission of the particles. The highest flux at any energy remains at least four orders of magnitude below the observed flux. There is thus no lower limit on epsilon.

Bhattacharjee, Pijushpani↗