Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FAIR data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Molecular mechanism of crystallization impacting calcium phosphate cements

In summary, SPM data has shown that (1) Mg inhibits growth on all steps but relatively high Mg/Ca ratios are needed. Extracting the mechanism of interaction requires more modeling of the kinetic data, but step morphology is consistent with incorporation. (2) Citrate has several effects depending on the citrate/Ca ratio. At the lowest concentrations, citrate increases the step free energy without altering the step kinetics; at higher concentrations, the polar step is slowed. (3) Oxalate also slows the polar step but additionally stabilizes a new facet, with a [100]{sub Cc} step. (4) Etidronate has the greatest kinetic impact of the molecules studied. At 7{micro}M concentrations, the polar step slows by 60% and a new polar step appears. However, at the same time the [10-1]{sub Cc} increases by 67%. It should be noted that all of these molecules complex calcium and can effect kinetics by altering the solution supersaturation or the Ca to HPO{sub 4}{sup 2-} ratio. For the SPM data shown, this effect was corrected for to distinguish the effect of the molecule at the crystal surface from the effect of the molecule on the solution speciation. The goal of this paper is to draw connections between fundamental studies of atomic step motion and potential strategies for materials processing. It is not our intent to promote the utility of SPM for investigating processes in cement dynamics. The conditions are spectacularly different in many ways. The data shown in this paper are fairly close to equilibrium (S=1.6) whereas the nucleation of cements is initiated at supersaturation ratios in the thousands to millions. Of course, after the initial nucleation phase, the growth will occur at more modest supersaturations and as the cement evolves towards equilibrium certainly some of the growth will occur in regimes such as shown here. In addition to the difference in supersaturation, cements tend to have lower additive to calcium ratios. As an example, the additive to Ca ratio is {approx}10{sup -3} to 10{sup -4} for a pyrophosphate based cement (Grover et al., 2006). Where the in situ SPM approach provides unique insights is in providing details of where and how molecules inhibit or accelerate kinetics. This has the potential to aid in designing molecules to target specific steps and to guide synergistic combinations of additives. For example, it is unlikely that bulk techniques could deduce the simultaneous acceleration and inhibition effects of etidronate; or that citrate reduced growth rate by altering step density rather than step speed. In addition, SPM data translates to tractable questions for modelers. The questions changes from 'How does etidronate inhibit brushite growth?' to 'Why does etidronate bind strongly to the [101]{sub Cc} step while it doesn't to the [10-1]{sub Cc} step?' This is still a challenging question but it is far better defined. Given that step chemistries are generally different, it seems reasonable to expect that the greatest inhibition will be achieved not with one, but with several synergistically chosen additives. For example, the most effective growth inhibitors for brushite would target the two fast steps, namely the non-polar, [10-1]{sub Cc} and the polar, [101]{sub Cc} steps. Several molecules have been shown to slow the polar step, with etidronate as the most dramatic example. By contrast, only Mg was observed to slow the [10-1]{sub Cc} step. Thus, a combination of high concentrations of Mg to target the [10-1]{sub Cc} step with low concentrations of etidronate to target the polar steps, should be a more effective combination than either alone. However Mg is not a particularly good inhibitor in the sense that high concentrations are needed, and it is not specific. More ideally, an inhibitor would be designed to interact specifically with the [10-1] step, which would allow the two steps to be independently modified. Again, this provides an opportunity for tighter coupling with theoretical modeling. The question changes from 'What types of molecules will inhibit brushite growth' to 'What type of molecule will interact with the [10-1]{sub Cc} step?' Similarly, to increase resorption rate, it would be most efficacious to target the slow moving [-100] step, perhaps by targeting the hydroxyl group which seem to stabilize this step compared to its otherwise similar mirror, [100]. In short, there are a number of opportunities where molecular scale imaging can provide new information that has the prospect to aid in optimizing calcium phosphate cements.

36 MATERIALS SCIENCE↗

Life Cycle Inventory of Current Photovoltaic Module Recycling Processes in Europe

With the rapid and accelerating growth of PV module installation and an increase of PV modules from the nineteen eighties and nineties reaching the end of their 30 year lifespan, their proper end of life treatment gets into focus. This report deals with the approaches, the environmental impacts and the recovered materials of PV module recycling. In this report, the environmental life cycle assessment of the current generation recycling of crystalline silicon (c-Si) and cadmium telluride (CdTe) PV modules is described. Due to the still limited waste stream today, c-Si PV modules are mainly treated in recycling plants designed for treatment of laminated glass, metals or electronic waste. Only the bulk materials glass, aluminium and copper are recovered, while the cells and other materials such as plastics are incinerated. CdTe PV modules have been treated in dedicated recycling plants for many years and life cycle inventories of this process have been published. The semiconductor is recovered in addition to glass and copper. Life cycle inventories of the recycling of current c-Si and CdTe PV modules are compiled following two modelling approaches related to recycling. The cut-off approach uses economic allocation to divide the total efforts of the recycling process between the treatment of the used PV module and the recovered products. The end-of-life approach considers the recycling process separately from the potentially avoided burdens due to recovered materials. The life cycle inventories of c-Si PV module recycling are based on data obtained from four European recyclers surveyed between 2015 and 2016. For CdTe PV module recycling, the life cycle inventories were established based on published data for the First Solar recycling facility in Germany. The life cycle impact assessment is done based on six environmental indicators previously identified as most relevant for PV electricity: particulate matter, freshwater ecotoxicity, human toxicity non-cancer effects, human toxicity cancer effects, mineral, fossil and renewable resource depletion and climate change. The life cycle inventories according to the cut-off approach can be applied to complement existing life cycle inventory data on PV systems. The environmental impacts of the recycling of c-Si PV modules are very small (maximum 1.1 %) compared to the impacts caused by the production of a 3 kWp residential PV system mounted on a slanted roof. In the case of CdTe PV module recycling, the treatment of the PV panels has the highest but still rather minor contribution in the indicator climate change (4.8 %). The life cycle inventories according to the end-of-life approach allow an assessment of the net environmental benefits of recycling. The recovery of glass, metals, and semiconductor material from c-Si and CdTe PV modules causes lower environmental impacts than the extraction, refinement and supply of the respective materials from primary resources. The highest potential benefits are observed in the indicator mineral, fossil and renewable resource depletion. The data quality of the recycling of c-Si PV modules is classified as fair since only limited information is available. In contrast, the data quality of CdTe PV module recycling is considered very good. The study was financed by the Swiss Federal Office of Energy (SFOE) and carried out in the framework of the Task 12 of the Photovoltaic Powers System Programme (PVPS) of the International Energy Agency (IEA).

14 SOLAR ENERGY↗

Classification of simple vegetation types using POLSAR image data

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to simple classifier for vegetation type. Vegetation classes include no vegetation cover (e.g. bare soil or desert), low vegetation cover (e.g. grassland), moderate vegetation cover (e.g. fully developed crops), forest and urban areas. Implementation of the approach requires estimates for the three components from all three frequencies available using the NASA/JPL AIRSAR, i.e. C-, L- and P-bands. The research described in this paper was carried out by the Jet Propulsion Laboratory, California Institute of Technology under a contract with the National Aeronautics and Space Administration.

Freeman, A.↗

Classification of Simple Vegetation Types Using POLSAR Image Data

Mapping basic vegetation or land cover types is a fairly common problem in remote sensing. Knowledge of the land cover type is a key input to algorithms which estimate geophysical parameters, such as soil moisture, surface roughness, leaf area index or biomass from remotely sensed data. In an earlier paper, an algorithm for fitting a simple three-component scattering model to POLSAR data was presented. The algorithm yielded estimates for surface scatter, double-bounce scatter and volume scatter for each pixel in a POLSAR image data set. In this paper, we show how the relative levels of each of the three components can be used as inputs to a simple classifier for vegetation type.

Freeman, A.↗

Open Science for Life in Space: Data Sharing and Tools for Knowledge Discovery

The fast-growing array of space biological data, which in the past was simply archived after minimal analysis, holds great potential if it can be reorganized and formatted for Open Science. Organizing the data for such analysis is a challenge because of its diverse nature (molecular, cellular, tissue, whole organism, behavior; tabular, imagery). Open Science is the concept that the more people have access to scientifically curated data, the more knowledge will be gained. This led NASA to start the development of GeneLab in 2015. GeneLab houses spaceflight and space-analog multi-omics datasets from plant, rodent, small animal, and microbial experiments. The success and knowledge gained from GeneLab led to a new alliance of NASA “Open Science Data Repositories” (OSDR), which include the Ames Life Sciences Data Archive (ALSDA) and the NASA Biological Institutional Scientific Collection (NBISC). Both are adopting the GeneLab data system, so data are more findable, accessible, interoperable, and reusable (FAIR). OSDR systems provide users the ability to upload, download, search, share, analyze, and visualize. Open Science also needs strong confidence in the data, which is gained through building science communities. With ~400 current members, GeneLab and ALSDA formed Analysis Working Groups (AWGs) to provide feedback on processing pipelines, metadata curation standards (for ‘omics and phenotypic-physiological-behavioral assays), and to collaborate in effectively reusing data. The AWG also led to the development of the Radiation Biology Ontology (RBO), ensuring radiation metadata are efficiently captured, connected, and interoperable. Feedback from the AWG provided design input toward the new single point-of-entry data submission portal for all investigators to submit, curate, and share their research data. Space biological data is now maximally open access, collected-curated with rich metadata, and formatted for interoperability to enable systems biology, meta-analysis, knowledge graphs, machine learning, modeling, and other reuse approaches. With potential for further federation of OSDR for data mining with traditional biological and medical databases (NIH, NCI, EBI, etc.), a new era for space biology has begun to support the knowledge discovery necessary for Lunar and Martian missions.

Ryan T Scott↗

Interpretation of hysteresis behaviour of PI-PS multigraft copolymers by adapting to the dynamic flocculation model.

Hysteresis behaviour of highly elastic multigraft copolymers with a polyisoprene (PI) backbone and branched polystyrene (PS) arms has been interpreted by applying the extended non-affine tube model of filler reinforced rubber elasticity (dynamic flocculation model), which takes into account that conformational fluctuations in bulk networks are strongly suppressed by packing effects. Originally, this model was developed to describe hyperelasticity of unfilled networks, and later, stress softening and hysteresis of filler reinforced elastomer materials like carbon black and silica filled rubbers. The evaluation of stress softening is obtained via pre-strain dependent hydrodynamic amplification of the rubber matrix by a fraction of rigid filler clusters with virgin filler filler bonds. The filler-induced hysteresis is described by a cyclic breakdown and re-aggregation of the residual fraction of more soft filler clusters with already broken filler filler bonds. We show, for the first time that the developed concept is in fair agreement with experimental stress strain data of superelastic PI PS multigraft copolymers. Depending on the PS-content and their functionality multigraft copolymers form microphase separated structures according to the constituting block copolymer concept, where the PS arms act as multi-domains in a PI matrix. The adaptation of the model is based on the assumption that the PS-domains are acting similar to filler clusters. The obtained microscopic material parameters appear reasonable for the description of the structure and mechanical properties of multigraft copolymers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

PDB-IHM: A System for Deposition, Curation, Validation, and Dissemination of Integrative Structures

Structures of many large biomolecular assemblies are now being determined using integrative approaches. In these approaches, information derived from multiple experimental and computational methods is combined to compute three-dimensional structures of multi-protein complexes and other macromolecular machines. A standalone prototype data resource for integrative structures called PDB-Dev was built, based on recommendations of the Integrative and Hybrid Methods (IHM) Task Force of the Worldwide Protein Data Bank (wwPDB). This effort included developing data standards and software tools for collecting, curating, validating, visualizing, archiving, and disseminating integrative structures that span diverse spatiotemporal scales and conformational states. Mechanisms have been created to validate integrative structures based on the experimental data underpinning them. Building upon this foundational framework, PDB-Dev has been further expanded to handle large dynamic macromolecular systems and integrative structures that combine, for example, experimental restraints with atomic coordinates computed by machine learning algorithms. Data standards and supporting tools have also been extended to capture information about biomolecular dynamics, such as conformational transitions and related kinetic data derived from biophysical methods. Recently, PDB-Dev was unified with the PDB archive and rebranded as PDB-IHM (pdb-ihm.org), further promoting FAIR (Findable, Accessible, Interoperable, and Reusable) principles of data stewardship for integrative structural biology.

IHMCIF↗

The Influence of Trapped Ions and Non-equilibrium EDF on Dust Particle Charging

Dust particles charging in a low-pressure glow discharge was investigated theoretically with the help of model for trapped and free ions coupled with the self-consistent solution of Poisson equation for electric potential. Non-equilibrium (non-Maxwellian) character of electron energy distribution function depending on gas pressure and electric field was also taken into account on the basis of the solution of kinetic Boltzmann equation. The results were compared with the experimental measurements of dust particle charge depending on gas pressure. It was shown that the calculated effective charge, i.e. the difference of the dust particle charge and trapped ion charge, is in a fairly good agreement with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simultaneous measurement of ultrasonic longitudinal wave velocities and thicknesses of a two layered media in the absence of an interface echo

A measurement technique has been developed to extract the phase information of successive echoes for the simultaneous estimation of thicknesses and ultrasonic velocities of individual layers in a two layered media. The proposed method works in the absence of an interface echo and requires the total thickness of the sample to be known. Experiments have been carried out on two layered samples of white cast iron and gray cast iron with layer thickness variation in the range of 2-8 mm for total thickness variation in the range of 12-13 mm. Comparison with micrographs of a few samples confirmed the model predictions. The model is found to be sensitive to the total sample thickness but fairly insensitive to noise in the data.

36 MATERIALS SCIENCE↗

Optical properties of water at high temperature

We calculate optical properties of water along the principal Hugoniot curve from ambient conditions up to temperatures of 130 000 K with density functional theory (DFT) and the Kubo-Greenwood formula. The effect of the exchange correlation functional is examined by comparing the generalized gradient approximation with a hybrid functional that contains Fock exchange. We find noticeable but moderate differences between the respective results which decrease rapidly above 80 000 K. The reflectivity along the principal Hugoniot is calculated and a good qualitative but fair quantitative agreement with available experimental data is found. Our results are of general relevance for calculations of optical properties with DFT at zero and elevated temperature.

36 MATERIALS SCIENCE↗

The Effect of the Residual Ion Potential on the Fully Differential Cross Section of Helium for Ionization by Electron Impact

We have carried out calculations for the fully differential cross section of the ionization of helium by electron projectiles. In order to study the effect of the residual ion potential, we employed three models, and tested them for the coplanar and perpendicular plane geometry. In spite of the simplicity of our models, the results for the coplanar case are in fair agreement with the available experimental data. The results for the perpendicular geometry need more improvement.

74 ATOMIC AND MOLECULAR PHYSICS↗

PROPAGATION AND SOURCE ENERGY SPECTRA OF COSMIC RAY NUCLEI AT HIGH ENERGIES

A recent measurement of the TRACER instrument on long-duration balloon has determined the individual energy spectra of the major primary cosmic ray nuclei from oxygen (Z = 8) to iron (Z = 26). The measurements cover a large range of energies and extend to energies beyond 10{sup 14} eV. We investigate if the data set can be described by a simple but plausible model for acceleration and propagation of cosmic rays. The model assumes a power-law energy spectrum at the source with a common spectral index {alpha} for all nuclear species, and an energy-dependent propagation path length ({lambda} {proportional_to} E {sup -0.6}) combined with an energy-independent residual path length {lambda}{sub 0}. We find that the data can be fitted with a fairly soft source spectrum ({alpha} = 2.3-2.4), and with a residual path length {lambda}{sub 0} as high as 0.3 g cm{sup -2}. We discuss this model in the context of other pertinent information, and we determine the relative abundances of the elements at the cosmic ray source.

79 ASTRONOMY AND ASTROPHYSICS↗

AGES AND METALLICITIES OF CLUSTER GALAXIES IN A779 USING MODIFIED STROeMGREN PHOTOMETRY

In the quest for the formation and evolution of galaxy clusters, Rakos and co-workers introduced a spectrophotometric method using modified Stroemgren photometry, but with the considerable debate toward the project's abilities, we re-introduce the system by testing for the repeatability of the modified Stroemgren colors and compare them with the Stroemgren colors, and check for the reproducibility of the ages and metallicities (using the Principle Component Analysis (PCA) technique and the GALEV models) for the six common galaxies in all three A779 data sets. As a result, a fair agreement between two filter systems was found to produce similar colors (with a precision of 0.09 mag in (uz - vz), 0.02 mag in (bz - yz), and 0.03 mag in (vz - vz)) and the generated ages and metallicities are also similar (with an uncertainty of 0.36 Gyr and 0.04 dex from PCA and 0.44 Gyr and 0.2 dex using the GALEV models). We infer that the technique is able to relieve the age-metallicity degeneracy by separating the age effects from the metallicity effects, but it is still unable to completely eliminate it. We further extend this paper to re-study the evolution of galaxies in the low mass, dynamically poor A779 cluster (as it was not elaborately analyzed by Rakos and co-workers in their previous work) by correlating the luminosity (mass), density, and radial distance with the estimated age, metallicity, and the star formation history. Our results distinctly show the bimodality of the young, low-mass, metal-poor population with a mean age of 6.7 Gyr ({+-} 0.5 Gyr) and the old, high-mass, metal-rich galaxies with a mean age of 9 Gyr ({+-} 0.5 Gyr). The method also observes the color evolution of the blue cluster galaxies to red (Butcher-Oemler phenomenon), and the downsizing phenomenon. Our analysis shows that modified Stroemgren photometry is very well suited for studying low- and intermediate-z clusters, as it is capable of observing deeper with better spatial resolution at spectroscopic redshift limits, and the narrowband filters estimate the age and metallicity with fewer uncertainties compared to other methods that study stellar population scenarios.

79 ASTRONOMY AND ASTROPHYSICS↗

OBO Foundry in 2021: operationalizing open data principles to evaluate ontologies

Biological ontologies are used to organize, curate and interpret the vast quantities of data arising from biological experiments. While this works well when using a single ontology, integrating multiple ontologies can be problematic, as they are developed independently, which can lead to incompatibilities. The Open Biological and Biomedical Ontologies (OBO) Foundry was created to address this by facilitating the development, harmonization, application and sharing of ontologies, guided by a set of overarching principles. One challenge in reaching these goals was that the OBO principles were not originally encoded in a precise fashion, and interpretation was subjective. Here, we show how we have addressed this by formally encoding the OBO principles as operational rules and implementing a suite of automated validation checks and a dashboard for objectively evaluating each ontology’s compliance with each principle. This entailed a substantial effort to curate metadata across all ontologies and to coordinate with individual stakeholders. We have applied these checks across the full OBO suite of ontologies, revealing areas where individual ontologies require changes to conform to our principles. Our work demonstrates how a sizable, federated community can be organized and evaluated on objective criteria that help improve overall quality and interoperability, which is vital for the sustenance of the OBO project and towards the overall goals of making data Findable, Accessible, Interoperable, and Reusable (FAIR).

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

197Au(n,gamma) Cross Section in the Unresolved Resonance Region

The cross section of the reaction {sup 197}Au(n,{gamma}) was measured with the time-of-flight technique at the n{_}TOF (neutron time-of-flight) facility in the unresolved resonance region between 5 and 400 keV using a pair of C{sub 6}D{sub 6} (where D denotes {sup 2}H) liquid scintillators for the detection of prompt capture {gamma} rays. The results with a total uncertainty of 3.9%-6.7% for a resolution of 20 bins per energy decade show fair agreement with the Evaluated Nuclear Data File Version B-VII.0 (ENDF/B-VII.0), which contains the standard evaluation. The Maxwellian-averaged cross section (MACS) at 30 keV is in excellent agreement with the one according to the ENDF/B-VII.0 evaluation and 4.7% higher than the MACS measured independently by activation technique. Structures in the cross section, which had also been reported earlier, have been interpreted as being due to clusters of resonances.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Workflow Provenance in the Computing Continuum for Responsible, Trustworthy, and Energy-Efficient AI

As Artificial Intelligence (AI) becomes more pervasive in our society, it is crucial to develop, deploy, and assess Responsible and Trustworthy AI (RTAI) models, i.e., those that consider not only accuracy but also other aspects, such as explainability, fairness, and energy efficiency. Workflow provenance data have historically enabled critical capabilities towards RTAI. Provenance data derivation paths contribute to responsible workflows through transparency in tracking artifacts and resource consumption. Provenance data are well-known for their trustworthiness helping explainability, reproducibility, and accountability. However, there are complex challenges to achieve RTAI, which are further complicated by the heterogeneous infrastructure in the computing continuum (Edge-Cloud-HPC) used to develop and deploy models. As a result, a significant research and development gap remains between workflow provenance data management and RTAI. In this paper, we present a vision of the pivotal role of workflow provenance in supporting RTAI and discuss related challenges. We present a schematic view between RTAI and provenance, and highlight open research directions.

Santos Souza, Renan↗