Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exercise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Stronger correlation with myocardial ischemia of high-sensitivity troponin T than other biomarkers

Background: Acute myocardial infarction (AMI) is considered a major cause of death and disability. Myocardial perfusion scintigraphy (MPS) as a non-invasive diagnostic imaging procedure and certain biomarkers associated with myocardial ischemia (ISCH), such as ischemia-modified albumin (IMA), neuropeptide Y (NPY), N-terminal pro b-type natriuretic peptide (NT-proBNP), and high-sensitivity troponin T (hsTnT) could probably aid in the detection of myocardial infarction. Methods: Between December 2011 and June 2012, we prospectively analyzed patients who underwent a MPS study with the clinical question of myocardial ISCH. An exercise test was performed along with a MPS. Blood was drawn from the patients before exercise and the within 3 minutes from achieving maximum load and was analyzed for the aforementioned biomarkers. Results: A total of 71 patients (56 men and 15 women) were enrolled with a mean age of 61 ± 12 years. Twenty-six patients (36.6%) showed reduced uptake on stress MPS images that normalized at rest, a finding consistent with ISCH. Between ISCH and non-ISCH groups, only hsTnT levels showed a significant difference with the highest levels pertaining to the former group both before (0.0075 ng/ml vs 0.0050 ng/ml, P = 0.023) and after stress exercise (0.0085 vs 0.0050, P = 0.015). The most prominent differences were seen in higher stages of the Bruce protocol (stress duration > 9.05 minutes – P < 0.017). None of the IMA, NPY, and NP-pro BNP showed significant differences in time between the two groups. Conclusions: Although IMA, NPY, and NT-pro BNP may not detect minor ischemic myocardial insults, serum hsTnT holds a greater ability of detecting not only myocardial infarction but also less severe ischemia. Further studies with larger cohorts of patients are warranted in order to better define the role of hsTnT as a screening tool for myocardial ischemia.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

MO-DE-BRA-02: SIMAC: A Simulation Tool for Teaching Linear Accelerator Physics

Purpose: The first goal of this work is to develop software that can simulate the physics of linear accelerators (linac). The second goal is to show that this simulation tool is effective in teaching linac physics to medical physicists and linac service engineers. Methods: Linacs were modeled using analytical expressions that can correctly describe the physical response of a linac to parameter changes in real time. These expressions were programmed with a graphical user interface in order to produce an environment similar to that of linac service mode. The software, “SIMAC”, has been used as a learning aid in a professional development course 3 times (2014 – 2016) as well as in a physics graduate program. Exercises were developed to supplement the didactic components of the courses consisting of activites designed to reinforce the concepts of beam loading; the effect of steering coil currents on beam symmetry; and the relationship between beam energy and flatness. Results: SIMAC was used to teach 35 professionals (medical physicists; regulators; service engineers; 1 week course) as well as 20 graduate students (1 month project). In the student evaluations, 85% of the students rated the effectiveness of SIMAC as very good or outstanding, and 70% rated the software as the most effective part of the courses. Exercise results were collected showing that 100% of the students were able to use the software correctly. In exercises involving gross changes to linac operating points (i.e. energy changes) the majority of students were able to correctly perform these beam adjustments. Conclusion: Software simulation(SIMAC), can be used to effectively teach linac physics. In short courses, students were able to correctly make gross parameter adjustments that typically require much longer training times using conventional training methods.

60 APPLIED LIFE SCIENCES↗

Reduced Incidence of Cardiac Arrhythmias in Walkers and Runners

Walking is purported to reduce the risk of atrial fibrillation by 48%, whereas jogging is purported to increase its risk by 53%, suggesting a strong anti-arrhythmic benefit of walking over running. The purpose of these analyses is to compare incident self-reported physician-diagnosed cardiac arrhythmia to baseline energy expenditure (metabolic equivalent hours per day, METhr/d) from walking, running and other exercise. Proportional hazards analysis of 14,734 walkers and 32,073 runners. There were 1,060 incident cardiac arrhythmias (412 walkers, 648 runners) during 6.2 years of follow-up. The risk for incident cardiac arrhythmias declined 4.4% per baseline METhr/d walked by the walkers, or running in the runners (P = 0.0001). Specifically, the risk declined 14.2% (hazard ratio: 0.858) for 1.8 to 3.6 METhr/d, 26.5% for 3.6 to 5.4 METhr/d, and 31.7% for $5.4 METhr/d, relative to ,1.8 METhr/d. The risk reduction per METhr/d was significantly greater for walking than running (P,0.01), but only because walkers were at 34% greater risk than runners who fell below contemporary physical activity guideline recommendations; otherwise the walkers and runners had similar risks for cardiac arrhythmias. Cardiac arrhythmias were unrelated to walking and running intensity, and unrelated to marathon participation and performance. The risk for cardiac arrhythmias was similar in walkers and runners who expended comparable METhr/d during structured exercise. We found no significant risk increase for self-reported cardiac arrhythmias associated with running distance, exercise intensity, or marathon participation. Rhythm abnormalities were based on self-report, precluding definitive categorization of the nature of the rhythm disturbance. However, even if the runners’ arrhythmias include sinus bradycardia due to running itself, there was no increase in arrhythmias with greater running distance.

59 BASIC BIOLOGICAL SCIENCES↗

Multimodel validation of single wakes in neutral and stratified atmospheric conditions

Previous research has revealed the need for a validation study that considers several wake quantities and code types so that decisions on the trade-off between accuracy and computational cost can be well informed and appropriate to the intended application. In addition to guiding code choice and setup, rigorous model validation exercises are needed to identify weaknesses and strengths of specific models and guide future improvements. Here, we consider 13 approaches to simulating wakes observed with a nacelle-mounted lidar at the Scaled Wind Technology Facility (SWiFT) under varying atmospheric conditions. We find that some of the main challenges in wind turbine wake modeling are related to simulating the inflow. In the neutral benchmark, model performance tracked as expected with model fidelity, with large-eddy simulations performing the best. In the more challenging stable case, steady-state Reynolds-averaged Navier–Stokes simulations were found to outperform other model alternatives because they provide the ability to more easily prescribe noncanonical inflows and their low cost allows for simulations to be repeated as needed. Dynamic measurements were only available for the unstable benchmark at a single downstream distance. These dynamic analyses revealed that differences in the performance of time-stepping models come largely from differences in wake meandering. This highlights the need for more validation exercises that take into account wake dynamics and are able to identify where these differences come from: mesh setup, inflow, turbulence models, or wake-meandering parameterizations. In addition to model validation findings, we summarize lessons learned and provide recommendations for future benchmark exercises.

17 WIND ENERGY↗

NASA analysis of space mission options for the 2025 planetary defense conference hypothetical asteroid impact threat scenario

The 2025 Planetary Defense Conference (PDC) hypothetical asteroid impact threat exercise is being conducted in coordination with the United Nations-endorsed Space Mission Planning Advisory Group (SMPAG), exercising SMPAG's processes for assessing space mission options and communicating to decision makers. Here, in this paper, we describe the work performed by our NASA-led team and present the results we contributed to the SMPAG effort for the exercise. Our NASA-led team assessed mission options for asteroid reconnaissance (flyby and rendezvous), deflection, and robust disruption using several viable techniques: kinetic impactors, ion beam deflection, and nuclear explosive devices. Our simulations and analyses considered how much change-in-velocity an asteroid can tolerate before fragmentation onset, and we worked towards establishing requirements for robustly disrupting an asteroid. Heuristics informed by the simulation results are incorporated into optimization of deflection and disruption mission campaign options. Finally, we make some observations about useful generalizations from these results with potential applicability to any planetary defense scenario.

Asteroid deflection↗

Leptin regulates the expression of angiopoietin-like 6

Highlights: • High-fat diet results in increased hepatic ANGPTL6 expression. • Leptin treatment upregulates ANGPTL6 expression in hepatocytes. • Exercise training decreases serum ANGPTL6 as well as leptin. Angiopoietin-like 6 (ANGPTL6) is a hepatokine that antagonizes obesity and insulin resistance by increasing energy expenditure. Despite its beneficial effects on metabolism, human studies have shown a paradoxical increase in ANGPTL6 level in the serum of patients with metabolic diseases, which has been interpreted as a compensatory upregulation. However, the regulatory mechanism of ANGPTL6 remains unclear. Since upregulation of ANGPTL6 is induced on metabolic stress, we investigated the hepatic expression of ANGPTL6 by leptin, a representative adipokine of obesity. Mice on a high-fat diet showed increased serum leptin levels and hepatic Angptl6 expression, which were attenuated by exercise training. A single leptin injection also induced hepatic ANGPTL6 expression and increased serum ANGPTL6 levels. In an in vitro model using primary hepatocytes, leptin treatment significantly upregulated ANGPTL6 expression at the mRNA and protein levels, as well as the amount of secreted ANGPTL6 protein in conditioned media. Similarly, exercise training on human participants also showed diminished serum levels of leptin and ANGPTL6. Altogether, these results strongly indicated that hepatic ANGPTL6 expression was determined by leptin.

60 APPLIED LIFE SCIENCES↗

Temporal multi-omic analysis uncovers sex-biased molecular programs underlying skeletal muscle adaptation to endurance training

Background. Exercise training is known to benefit health and reduce disease risk. While adaptations in skeletal muscles are fundamental to many of the health benefits of exercise training, the common and sex-specific molecular regulators that mediate these adaptations remain to be fully elucidated. Methods. To this end, we leveraged skeletal muscle multi-omics data generated by the Molecular Transducers of Physical Activity Consortium (MoTrPAC), where 6 month-old male and female rats endurance trained for 1, 2, 4, or 8 weeks. Our objective was to identify shared and sex-specific multi-omic molecular responses to endurance training in skeletal muscle, and relate them to phenotypic adaptations. Results. We identified largely sexually-conserved transcriptomic and proteomic enrichments in the gastrocnemius, which correlated with skeletal muscle responses from a published exercise study in humans. We uncovered sex-consistent post-translational modifications, including decreased oxidation of MYH2 and deacetylation of the ß-oxidation enzyme HADHA. Pathway enrichment analyses revealed sex-specific remodeling across the acetylome, redox proteome, and phosphoproteome; females decreased mitochondrial protein oxidation and increased mitochondrial cristae proteins, indicative of enhanced redox buffering and mitochondrial efficiency. Despite observed decreases in the oxidation of key mitochondrial proteins, females displayed increases in the oxidation of proteins involved in glucose catabolism relative to males after 8 weeks of training, suggestive of sex-biased subcellular reactive oxygen species generation. Conclusions. This work shows a large portion of the adaptive response to endurance training in skeletal muscle is shared between females and males, while there are distinct and nuanced sex-specific adaptations that are evident, particularly at the level of post-translational regulation.

Many, Gina M.↗

Interlaboratory Study: Testing Reproducibility of Solid Biofuels Component Identification Using Reflected Light Microscopy

Considering global market trends and concerns about climate change and sustainability, increased biomass use for energy is expected to continue. As more diverse materials are being utilized to manufacture solid biomass fuels, it is critical to implement quality assessment methods to analyze these fuels thoroughly. One such method is reflected light microscopy (RLM), which has the potential to complement and enhance current standard testing, leading to improving fuel quality assessment and, ultimately, preventing avoidable air pollution. An interlaboratory study (ILS) was conducted to test the reproducibility of biomass fuels component identification using a reflected light microscopy technique. The exercise was conducted on thirty photomicrographs showing biomass and various undesired components (like plastics or mineral matter), which were purposely added (by the ILS organizers) to contaminate wood pellets and charcoal-based grilling fuels. Forty-six participants had various levels of difficulty identifying the marked components, and as a result, the percentage of correct answers ranged from 52.2 to 94.4%. Among the most difficult components to distinguish were petroleum products and inorganic matter. Various reasons led to the misidentification, including insufficient morphological descriptions of the components provided to participants, ambiguities of the nomenclature, limitations of the analytical and exercise method, and insufficient experience of the participants. Overall, the results indicate that RLM has the potential to enhance the quality assessment of biomass fuels. However, they also demonstrate that the petrographic classification used in this exercise requires further refinement before it can be standardized. While a new simplified classification of solid biomass fuels components was created as an outcome of this study, future research is necessary to refine the nomenclature, develop a microscopic morphological description of the components, and verify the accuracy of component identification with a follow-up ILS.

biomass↗

Design Tool for Estimating Chemical Hydrogen Storage System Characteristics for Light-Duty Fuel Cell Vehicles

The U.S. Department of Energy (DOE) has developed a vehicle framework model to simulate fuel cell-based light-duty vehicle operation for various hydrogen storage systems. This transient model simulates the performance of the storage system, fuel cell, and vehicle for comparison to DOE’s Technical Targets using four drive cycles/profiles. Chemical hydrogen storage models have been developed for the Framework model for both exothermic and endothermic materials. Despite the utility of such models, they require that material researchers input system design specifications that cannot be easily estimated. To address this challenge, a design tool has been developed that allows researchers to directly enter kinetic and thermodynamic chemical hydrogen storage material properties into a simple sizing module that then estimates the systems parameters required to run the storage system model. Additionally, this design tool can be used as a standalone executable file to estimate the storage system mass and volume outside of the framework model and compare it to the DOE Technical Targets. These models will be explained and exercised with existing hydrogen storage materials.

hydrogen storage materials, Fuel Cell Vehicles, de↗

Open-source MFIX-DEM software for gas–solids flows: Part I—Verification studies

With rapid advancements in computer hardware, it is now possible to perform large simulations of granular flows using the Discrete Element Method (DEM). As a result, solids are increasingly treated in a discrete Lagrangian fashion in the gas–solids flow community. In this paper, the open-source MFIX-DEM software is described that can be used for simulating the gas–solids flow using an Eulerian reference frame for the continuum fluid and a Lagrangian discrete framework (Discrete Element Method) for the particles. This method is referred to as the continuum discrete method (CDM) to clearly make a distinction between the ambiguity of using a Lagrangian or Eulerian reference for either continuum or discrete formulations. This freely available CDM code for gas–solids flows can accelerate the research in computational gas–solids flows and establish a baseline that can lead to better closures for the continuum modeling (or traditionally referred to as two fluid model) of gas–solids flows. In this paper, a series of verification cases is employed which tests the different aspects of the code in a systematic fashion by exploring specific physics in gas–solids flows before exercising the fully coupled solution on simple canonical problems. It is critical to have an extensively verified code as the physics is complex with highly-nonlinear coupling, and it is difficult to ascertain the accuracy of the results without rigorous verification. These series of verification tests set the stage not only for rigorous validation studies (performed in part II of this paper) but also serve as a procedure for testing any new developments that couple continuum and discrete formulations for gas–solids flows.

Computational fluid dynamics↗

Long History of IAM Comparisons

Correspondence to editor: We agree with the editors that the assumptions behind models of all types, including integrated assessment models (IAMs), should be as transparent as possible. The editors were in error, however, when they implied that the IAM community is just “now emulating the efforts of climate researchers by instigating their own model inter-comparison projects (MIPs).” In fact, model comparisons for integrated assessment and climate models followed a remarkably similar trajectory. Early General Circulation Model (GCM) comparison efforts, evolved to the first Atmospheric Model Inter-comparison Project (AMIP), which was initiated in the early 1990s. Atmospheric models evolved to coupled atmosphere-ocean models (AOGCMs) and results from the first Coupled Model Inter-Comparison Project (CMIP1) become available about a decade later. Results of first energy model comparison exercise, conducted under the auspices of the Stanford Energy Modeling Forum, were published in 1977. A summary of the first comparison focused on climate change was published in 1993. As energy models were coupled to simple economic and climate models to form IAMs, the first comparison exercise for IAMs (EMF-14) was initiated in 1994, and IAM comparison exercises have been on-going since this time.

Smith, Steven J.↗

Sodium Analysis in Whole Blood of Athletes Using NAA

In this investigation the sodium levels in blood were analyzed in athletes submitted to constant load exercise at treadmill (LABEX and UNICAMP) by NAA. These data were compared with the rest condition (before starting the exercise program) as well as with the sodium levels of the healthy group (control group) select from Blood Banks. The results showed alterations in sodium levels of the athletes during the exercise training, mainly increase, suggesting the necessity of its evaluation during physical activities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The CMS data analysis school experience

The CMS Data Analysis School is an official event organized by the CMS Collaboration to teach students and post-docs how to perform a physics analysis. The school is coordinated by the CMS schools committee and was first implemented at the LHC Physics Center at Fermilab in 2010. As part of the training, there are a number of “short” exercises on physics object reconstruction and identification, Monte Carlo simulation, and statistical analysis, which are followed by “long” exercises based on physics analyses. Some of the long exercises go beyond the current state of the art of the corresponding CMS analyses. This paper describes the goals of the school, the preparations for a school, the structure of the training, and student satisfaction with the experience as measured by surveys.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Case Study: Resilience Benefits of Distributed Wind Against Fuel and Weather Hazards in Alaska

In this case study of St. Mary’s Village, Alaska, we present a resilience evaluation exercise. A resilience framework is employed to identify system characteristics, relevant metrics, and resilience hazards and to assess the performance against the hazards with and without a distributed wind system installed. The results show the resilience benefits provided by the distributed wind installation against fuel shortage hazards and cold weather hazards. The resilience benefits can be assigned monetary values, which will be highly dependent on actual circumstances of the hazard, but provide insight into value streams of distributed wind that are not usually considered. For example, the single 900 kW turbine was found to prevent an average of 14,643 kWh of load from being dropped during a two-day diesel fuel shortage event, which saved the community $447,592 from the prevented outages. This case study serves as an example for novel power system resilience analysis and builds understanding of resilience hazards that are common across many power systems.

Culler, Megan J.↗

SU-C-BRD-01: Multi-Centre Collaborative Quality Assurance Program for IMRT Planning and Delivery: Year 3 Results

Purpose: A multi-centre quality assurance program was developed to enable quality improvement by coupling measurement of intensity modulated radiotherapy (IMRT) planning and delivery performance for site-specific planning exercises with diagnostic testing. The third year of the program specifically assessed the quality of spine stereotactic body radiotherapy (SBRT) planning and delivery amongst the participating centres. Methods: A spine SBRT planning exercise (24 Gy in 2 fractions) was created and completed by participants prior to an on-site visit. The delivery portion of the on-site visit included spine SBRT plan delivery and diagnostic testing, which included portal image acquisition for quantification of phantom positioning error and multi-leaf collimator (MLC) calibration accuracy. The measured dose was compared to that calculated in the treatment planning system (TPS) using 3%/2mm composite analysis and 3%/3mm gamma analysis. Results: Fourteen institutions participated, creating 17 spine SBRT plans (15 VMAT and 2 IMRT). Three different TPS, two beam energies (6 MV and 6 MV FFF), and four MLC designs from two linac vendors were tested. Large variation in total monitor units (MU) per plan (2494–6462 MU) and dose-volume parameters was observed. The maximum point dose in the plans ranged from 116–149% and was dependent upon the TPS used. Pass rates for measured to planned dose comparison ranged from 89.4–100% and 97.3–100% for 3%/2mm and 3%/3mm criteria respectively. The largest measured MLC error did Result in one of the poorer pass rates. No direct correlation between phantom positioning error and pass rates overall. Conclusion: Significant differences were observed in the planning exercise for some plan and dose-volume parameters based on the TPS used. Standard evaluation criteria showed good agreement between planned and measured dose for all participants, however on an individual plan basis, diagnostic tests were able to identify contributing factors for poorer results, when using more stringent evaluation criteria. Funding from Cancer Care Ontario is acknowledged.

60 APPLIED LIFE SCIENCES↗

SU-C-BRB-04: Characteristics and Performance Evaluation of the First Commercial MLC for a Robotic Delivery System

Purpose: To assess characteristics and performance of the “Incise™” MLC (41 leaf pairs, 2.5mm width, FFF linac) mounted on the robotic SRS/SBRT platform “CyberKnife M6™” in a pre-clinical 5 months (11/2014–03/2015) test period. Methods: Beam properties were measured with unshielded diodes and EBT3 film. The CyberKnife workspace for MLC was analyzed by transforming robot node coordinates (cranial / body paths) into Euler geometry. Bayouth tests for leaf / bank position accuracy were performed in standard (A/P) and clinically relevant non-standard positions, before and after exercising the MLC for 10+ minutes. Total system and delivery accuracy were assessed in End-to-End tests and dosimetric verification of exemplary plans. Stability over time was evaluated in Picket-Fence-and adapted Winston-Lutz-tests (AQA) for different collimator angles. Results: Penumbrae (80–20%, with 100%=2*dose at inflection point; SAD 80cm; 10cm depth) parallel / perpendicular to leaf motion were 2.87/2.64mm for the smallest (0×76×0.75cm{sup 2}) and 5.34/4.94mm for the largest (9.76×9.75cm{sup 2}) square field. MLC circular field penumbrae exceeded fixed cones by 10–20% (e.g. 60mm: 4.0 vs. 3.6mm; 20mm: 3.6 vs. 2.9mm). Interleaf leakage was <0.5%. Clinically accessible workspace with MLC covered (non-coplanar) gantry angles of [-113°;+112°] (cranial) and [-108°;+102°] (body), and collimator angles of [-100°;+107°] (cranial) and [-91°;+100°] (body). Average leaf position offsets were ≤0.2mm in 14 standard A/P Bayouth tests and ≤0.6mm in 8 non-standard direction tests. Pre-test MLC exercise increased jaggedness (range ±0.3mm vs. ±0.5mm) and allowed to identify one malfunctioning leaf motor. Total system accuracy with MLC was 0.39±0.06mm in 6 End-to-End tests. Picket-Fence and AQA showed no adverse trends during the test period. Conclusion: The Incise™ MLC for CyberKnife M6™ displayed high accuracy and mechanical stability over the test period. The specific CyberKnife geometry and performance after exercise demand dedicated QA measures. This work is in part funded by a research grant from Accuray Inc, Sunnyvale, USA. Erasmus MC Cancer Institute also has research collaborations with Elekta AB, Stockholm, Sweden. C Fuerweger has previously received speaker honoraria from Accuray Inc, Sunnyvale, USA.

60 APPLIED LIFE SCIENCES↗

Ergodic Lagrangian dynamics in a superhero universe

We present a fictional scenario that, while undeniably whimsical, provides the foundation for a unique exercise in extended problem solving, physics analysis, and quantitative model development. Starting with the foundational premise of the Wild Cards shared-world superhero universe, we demonstrate how a variety of concepts appropriate to the advanced undergraduate level—ergodicity, functional analysis, Lagrangian mechanics, and the ever-important simplifying approximation—can be combined into a rich, coherent mathematical model. The goal of this case study is to develop a useful pedagogical exercise in exploring an open-ended research question that presents, at first glance, no clear path forward. Being both eclectic and lengthy, this exercise offers a unique way for students to apply their core physics and mathematics education. It is perhaps best used within a senior honors seminar or within a brief (e.g., January term) elective class.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A core lighting curriculum for university students and lighting professionals

Here, in collaboration with a group of lighting professionals, learning outcomes were defined, prioritized, organized and mapped to a three-course sequence of lighting courses within a Bachelor of Science in Architectural Engineering degree programme. Syllabi and educational exercises were developed to support the learning outcomes – including classroom activities, homework assignments and design projects. The learning exercises balance the technical foundations of applied illuminating engineering with the artistic aspects of applied lighting design and are intended to promote significant and lasting learning by providing students with education that is useful and relevant to current lighting practice. The process for identifying and prioritizing lighting content is described, a process that could be adapted by other lighting educators to other pedagogical contexts. The syllabi and learning exercises are disseminated for reuse or adaptation, or for self-study by independent learners.

42 ENGINEERING↗