Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Allowed and forbidden transition parameters for Fe XV

A comprehensive set of fine structure energy levels, oscillator strengths (f), line strengths (S), and radiative decay rates (A) for bound-bound transitions in Fe XV is presented. The allowed electric dipole (E1) transitions were obtained from the relativistic Breit-Pauli R-matrix method which is based on the close coupling approximation. A total of 507 fine structure energy levels with n {<=} 10, l {<=} 9, and 0 {<=} J {<=} 10 are found. They agree within 1% with the available observed energies. These energy levels yield a total of 27,812 E1, same-spin multiplets and intercombination transitions. The A values are in good agreement with those compiled by NIST and other existing values for most transitions. Forbidden transitions are obtained from a set of 20 configurations with orbitals ranging from 1s to 5f using the relativistic code SUPERSTRUCTURE (SS) in the Breit-Pauli approximation. From a set of 123 fine structure levels, a total of 6962 S and A values are presented for forbidden electric quadrupole (E2), electric octupole (E3), magnetic dipole (M1), and magnetic quadrupole (M2) transitions. The energies from SS calculations agree with observed energies to within 1-3%. A values for E2, M1 transitions agree very well with the available values for most transitions while those for M2 transitions show variable agreement. The large set of transition parameters presented should be applicable for both diagnostics and spectral modeling in the X-ray, ultraviolet, and optical regions of astrophysical plasmas.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Defect-related photoluminescence emission from annealed ZnO films deposited on AlN substrates

Highlights: • ZnO film is deposited on AlN substrates based on both have individual excellent optical properties. • Electron transitions from V{sub Al}-O{sub N} defect energy level in AlN to the Zn vacancies deep levels in ZnO induce blue emission. • Excellent blue emissions are obtained due to the synergistic effect between ZnO and AlN. - Abstract: ZnO film deposited on AlN shows excellent blue emission. Photoluminescence (PL) emission is further enhanced by annealed treatment. The corresponding emission mechanism is discussed. V{sub Al}-O{sub N} are the dominant form of V{sub Al} in as grown AlN samples. When the energy of the incident photons is just enough to pump the electrons up to the V{sub Al}-O{sub N} energy level, a mass of electrons can be directly trapped by the V{sub Al}-O{sub N} defect centers, which will induce effective transitions from these defect energy level to the top of the valence band, and then transitions to Zn vacancies levels in ZnO due to similar lattice constants between ZnO and AlN. The energy interval between the V{sub Al}-O{sub N} in AlN and the Zn vacancies defect states in ZnO is about 2.96 eV, which is well consistent with the energy of the blue peak at 420 nm (2.96 eV).

36 MATERIALS SCIENCE↗

Double-magic nature of 132Sn and 208Pb through lifetime and cross-section measurements

Single-neutron states in 133Sn and 209Pb, which are analogous to single electrons outside of closed atomic shells in alkali metals, were populated by the (9Be,8Be) one-neutron transfer reaction in inverse kinematics using particle-gamma coincidence spectroscopy. In addition, the s1/2 single-neutron hole-state candidate in 131Sn was populated by (9Be,10Be). Doubly closed-shell 132Sn (radioactive) and 208Pb (stable) beams were used at sub-Coulomb barrier energies of 3 MeV per nucleon. Level energies, gamma-ray transitions, absolute cross sections, spectroscopic factors, asymptotic normalization coefficients, and excited-state lifetimes are reported and compared to shell-model expectations. The results include a new transition and precise level energy for the 3p1/2 candidate in 133Sn, new absolute cross sections for the 1h9/2 candidate in 133Sn and 3s1/2 candidate in 131Sn, and new lifetimes for excited states in 133Sn and 209Pb. This is the first report on excited-state lifetimes of 133Sn, which provide a unique signature of the single-neutron states and 132Sn double-shell closure.

Allmond, James↗

Understanding the electronic structure of CdSe quantum dot-fullerene (C{sub 60}) hybrid nanostructure for photovoltaic applications

By using the density-functional tight binding method, we studied the electronic structure of CdSe quantum dot(QD)-buckminsterfullerene (C{sub 60}) hybrid systems as a function of both the size of the QD and concentration of the fullerene molecule. Our calculation reveals that the lowest unoccupied molecular orbital energy level of the hybrid CdSeQD-C{sub 60} systems lies on the fullerene moiety, whereas the highest occupied molecular orbital (HOMO) energy level lies either on the QD or the fullerene depending on size of the CdSe QD. We explored the possibility of engineering the energy level alignment by varying the size of the CdSe QD. With increase in size of the QD, the HOMO level is shifted upward and crosses the HOMO level of the C{sub 60}-thiol molecule resulting transition from the type-I to type-II band energy alignment. The density of states and charge density plot support these types of band gap engineering of the CdSe-C{sub 60} hybrid systems. This type II band alignment indicates the possibility of application of this nanohybrid for photovoltaic purpose.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Communication: Rigidity of the molecular ion H{sub 5}{sup +}

The fourth-age quantum chemical code GENIUSH is used for the variational determination of rotational-vibrational energy levels corresponding to reduced- and full-dimensional models of H{sub 5}{sup +}, a molecular ion exhibiting several strongly coupled large-amplitude motions. The computations are supplemented with one- and two-dimensional analytic results which help to understand the peculiar rovibrational energy-level structure computed correctly for the first time. An unusual aspect of the results is that the canonical Eckart-embedding of molecule-fixed axes, a cornerstone of the computational spectroscopy of semirigid molecules, is found to be inadequate. Furthermore, it is shown that while the 1D “active torsion” model provides proper results when compared to the full, 9D treatment, models excluding the torsion have limited physical significance. The structure of the rovibrational energy levels of H{sub 5}{sup +} proves that this is a prototypical astructural molecule: the rotational and vibrational level spacings are of the same order of magnitude and the level structure drastically deviates from that computed via perturbed rigid-rotor and harmonic-oscillator models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A model study of assisted adiabatic transfer of population in the presence of collisional dephasing

Previous studies have demonstrated that when experimental conditions generate non-adiabatic dynamics that prevents highly efficient population transfer between states of an isolated system by stimulated Raman adiabatic passage (STIRAP), the addition of an auxiliary counter-diabatic field (CDF) can restore most or all of that efficiency. This paper examines whether that strategy is also successful in a non-isolated system in which the energies of the states fluctuate, e.g., when a solute is subject to collisions with solvent. We study population transfer in two model systems: (i) the three-state system used by Demirplak and Rice [J. Chem. Phys. 116, 8028 (2002)] and (ii) a four-state system, derived from the simulation studies of Demirplak and Rice [J. Chem. Phys. 125, 194517 (2006)], that mimics HCl in liquid Ar. Simulation studies of the vibrational manifold of HCl in dense fluid Ar show that the collision induced vibrational energy level fluctuations have asymmetric distributions. Representations of these asymmetric energy level fluctuation distributions are used in both models (i) and (ii). We identify three sources of degradation of the efficiency of STIRAP generated selective population transfer in model (ii): too small pulse areas of the laser fields, unwanted interference arising from use of strong fields, and the vibrational detuning. For both models (i) and (ii), our examination of the efficiency of STIRAP + CDF population transfer under the influence of the asymmetric distribution of the vibrational energy fluctuations shows that there is a range of field strengths and pulse durations under which STIRAP + CDF control of population transfer has greater efficiency than does STIRAP generated population transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene-based terahertz tunable plasmonic directional coupler

We propose and numerically analyze a terahertz tunable plasmonic directional coupler which is composed of a thin metal film with a nanoscale slit, dielectric grating, a graphene sheet, and a dielectric substrate. The slit is employed to generate surface plasmon polaritons (SPPs), and the metal-dielectric grating-graphene-dielectric constructs a Bragg reflector, whose bandgap can be tuned over a wide frequency range by a small change in the Fermi energy level of graphene. As a graphene-based Bragg reflector is formed on one side of the slit, the structure enables SPP waves to be unidirectionally excited on the other side of the slit due to SPP interference, and the SPP waves in the Bragg reflector can be efficiently switched on and off by tuning the graphene's Fermi energy level. By introducing two optimized graphene-based Bragg reflectors into opposite sides of the slit, SPP waves can be guided to different Bragg reflectors at different Fermi energy levels, thus achieving a tunable bidirectional coupler.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Renner-Teller effect in HCCCl{sup +}(X{sup ~2}Π) studied by zero-kinetic energy photoelectron spectroscopy and ab initio calculations

The spin-vibronic energy levels of the chloroacetylene cation up to 4000 cm{sup −1} above the ground state have been measured using the one-photon zero-kinetic energy photoelectron spectroscopic method. The spin-vibronic energy levels have also been calculated using a diabatic model, in which the potential energy surfaces are expressed by expansions of internal coordinates, and the Hamiltonian matrix equation is solved using a variational method with harmonic basis functions. The calculated spin-vibronic energy levels are in good agreement with the experimental data. The Renner-Teller (RT) parameters describing the vibronic coupling for the H—C≡C bending mode (ε{sub 4}), Cl—C≡C bending mode (ε{sub 5}), the cross-mode vibronic coupling (ε{sub 45}) of the two bending vibrations, and their vibrational frequencies (ω{sub 4} and ω{sub 5}) have also been determined using an effective Hamiltonian matrix treatment. In comparison with the spin-orbit interaction, the RT effect in the H—C≡C bending (ε{sub 4}) mode is strong, while the RT effect in the Cl—C≡C bending mode is weak. There is a strong cross-mode vibronic coupling of the two bending vibrations, which may be due to a vibronic resonance between the two bending vibrations. The spin-orbit energy splitting of the ground state has been determined for the first time and is found to be 209 ± 2 cm{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Cell-Level Specific Energy for All-Solid-State Lithium Sulfur Batteries

All-solid-state lithium-sulfur (Li-S) batteries are considered as one of the top choices toward 500 Wh/kg of specific energy, a key metric for an energy storage system to enable large regional electric aircrafts. Many obstacles remain, such as S utilization in the cathode, cyclability regarding both cathode and anode as well as electrode-electrolyte interfaces, and effective means to increase the S content within the all-solid-state cell architecture. The latter is directly related to cell-level specific energy when considering the weights of all battery cell components. In this presentation, we discuss the efforts in both cathode optimization and cell-level improvement toward increasing the overall specific energy. Various strategies for improving S utilization and reducing the solid electrolyte layer thickness will be presented.

Solid state batteries↗

Kinetics of CO Molecules Taking into Account Resonant VE Exchanges in a Nonequilibrium Nozzle Flow

The kinetics of CO molecules with excited electronic levels for a nonequilibrium flow in nozzles is studied. Three electronic energy levels are taken into account; the VV exchanges of the vibrational energy within each electronic energy level, VT transitions from the vibrational energy to the translational energy, and VE exchanges between the vibrational energy and the electronic terms occur in the system. The system of equations of vibrational level kinetics and gasdynamics, which is written in the zeroth approximation of the Chapman–Enskog method, is solved numerically. Special attention is paid to estimating the effect of the VE exchanges of the vibrational energy on the formation of nonequilibrium populations of the vibrational levels. It is shown that resonant VE transitions considerably affect the relaxation process and noticeably change the population of the upper vibrational levels even in the absence of recombination and dissociation processes; VE exchanges also affect the time dependence of the vibrational temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluation of Low-cost, Full HD, CMOS Cameras for Use in the Calcine Retrieval Project - 19530

This paper describes results from radiation testing conducted on low-cost, commercial off-the-shelf, full high-definition (HD) resolution (1920 x 1080 p), complementary metal-oxide-semiconductor (CMOS) camera sensors. The purpose of the testing was to evaluate the sensors' suitability for use in the Calcine Retrieval Project by determining their image quality and life expectancy while operating in an ionizing radiation field of 20.0 Gy/h. The two camera sensors tested were the Axis FA1105 and Axis FA1125. These commercial camera sensors were designed for retail security surveillance and have no radiation-hardened (rad-hard) components. In addition to radiation testing, the sensors' field-of-view, resolution, and low-light image quality were tested at several target distances to ensure they meet project requirements. Testing was divided into two phases. During Phase 1, four FA1105 sensors and four FA1125 sensors were tested simultaneously without any shielding in radiation fields of 25.5 Gy/h and 49.3 Gy/h. In Phase 2, three FA1105 and five FA1125 sensors were shielded by 22.2 mm of lead and tested simultaneously in radiation fields of 26.8 Gy/h, 52.3 Gy/h, 143.0 Gy/h, 200.7 Gy/h, 404.6 Gy/h, and 2,317.5 Gy/h. Dose rate values were established using film dosimetry readings. Apertures in the shielding allowed for a 40-degree field of view while shielding all parts of the sensor except for directly in front of the CMOS sensor array. All testing was conducted at the Idaho Accelerator Center in Pocatello, Idaho, using a 450 keV X-ray generator. Sensor images were automatically captured at regular intervals throughout the testing for qualitative evaluation by the test team. Film dosimetry was placed near the sensors to record actual dose totals. The 450 keV setting generates X-ray radiation with an energy level close to the primary gamma energy level produced by the Cesium-137 isotope in the calcine, which is 662 keV. Results from Phase 1 indicate the sensors failed at an average cumulative dose of 226.3 Gy. For a given 20.0 Gy/h field this results in a mean time to failure (MTTF) of 11.3 hours. Recorded images from all sensors showed minimal image degradation due to radiation-induced noise. When the sensors finally failed, the failure mode was an abrupt loss of video. The image went black suggesting some other component in the sensor head besides the CMOS sensor array was responsible for the failure. During a portion of Phase 1 testing, a commercial, rad-hard camera was irradiated in the 25.5 Gy/h field along with the eight Axis FA series sensors. Image quality from the FA series sensors significantly outperformed the image quality of the rad-hard camera in radiation-induced noise tolerance, image resolution, and dynamic range. During Phase 2 testing, all sensors produced excellent images in radiation fields as high as 404.6 Gy/h. One FA1125 sensor was tested at the highest dose rate of 2,317.5 Gy/h. At this dose rate, the image was color shifted towards red and contained a significant amount radiation-induced noise. The sensor did not fail and was producing usable imagery after one hour, at which time the test was ended due to allotted beam-time at the test facility. Eighteen hours after X-rays were shut off, the sensor image returned to normal color and all eight sensors continued to operate without any visible, permanent image degradation. For Phase 2 testing, it was not possible to establish a MTTF since none of the shielded sensors failed during the allotted test time. However, given the highest cumulative dose of 4,142.1 Gy received by a shielded FA1125 sensor, a minimum life expectancy of 207 hours (8.6 days) is predicted while operating in a 20.0 Gy/h field. Test results indicate the radiation tolerance of the FA series sensor's CMOS array, along with the small form factor, full HD image quality, wide dynamic range, and Ethernet standard makes it suitable for short-term use in monitoring and visually documenting waste remediation efforts for the Calcine Retrieval Project at the INL. The sensor's low-cost of about $140 US, compared to commercial rad-hard cameras costing between $5,000 and $7,000 US each, allow them to be used as an affordable, disposable resource for many short-duration, radioactive waste remediation efforts where decontamination of an expensive, commercial rad-hard camera is undesirable or not possible. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Additive‐Free Oxidized Spiro‐MeOTAD Hole Transport Layer Significantly Improves Thermal Solar Cell Stability

Perovskite solar cells are among the most promising new solar technologies, already surpassing polycrystalline silicon solar cell efficiencies. The stability of the highest efficiency devices at elevated temperature is, however, poor. These cells typically use Spiro-MeOTAD as the hole transporting layer. It is generally believed that additives, required for enhancing electrical conductivity and optimizing energy level alignment, are responsible for the reduced stability—inferring that Spiro-MeOTAD based hole transporting layers are intrinsically unstable. Here, a reliable noble metal free synthesis of Spiro-MeOTAD (bis(trifluoromethane)sulfonimide) 4 is presented which is used as the oxidizing agent. No additives are added to the partially oxidized Spiro-MeOTAD hole-transporting layer. Device efficiencies up to 24.2% are achieved. Electrical conductivity is largely developed by the first 1% oxidation. Further oxidation shifts the energy levels away from the vacuum level, which allows tuning of the energy level alignment without the use of additives—contradicting the current understanding of this system. Without additives, devices demonstrate significant improvement in stability at elevated temperatures up to 85 °C under one sun over 1400 h continuous illumination. The remaining degradation is pinpointed to ion migration and reactions in the perovskite layer which may be further suppressed with compositional engineering and adequate ion barrier layers.

14 SOLAR ENERGY↗

Development and applications of a multi-level strain energy method for detecting finite element modeling errors

A computational procedure is described which can be used efficiently in identifying modeling errors which may arise from development of a structural finite element model. The procedure, which is referred to as the multi-level strain energy check, is set up in the form of a set of NASTRAN DMAP alters which provide sufficient information about the modeling errors at G-Set, N-Set, and F-Set levels. This technique was applied to two NASTRAN models, namely, the AH-64A and AH-1G models. Two modeling errors were identified for the AH-1G, which were then corrected.

Hashemi-Kia, Mostafa↗

Roto-translational states of the interstitial molecular hydrogen in silicon: A theoretical study

A theoretical study of the interstitial molecular hydrogen in the silicon single-crystal is reported. H{sub 2} and Si have been approximated as a rigid object and a static matrix, respectively. A five-dimensional numerical-analytical representation of an ab initio potential energy surface of the system has been constructed. This representation has been used to calculate rotational, translational, and roto-translational energy levels of the interstitial hydrogen, where three levels of theory, 2D, 3D, and 5D were considered. The potential energy surface, the band structure of energy levels, and the roto-translational states obtained are presented together with the symmetry analysis of the roto-translational wavefunctions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimized control of Stark-shift-chirped rapid adiabatic passage in a {lambda}-type three-level system

Inhomogeneous broadening of energy levels is one of the principal limiting factors for achieving 'slow' or 'stationary' light in solid-state media by means of electromagnetically induced transparency, a quantum version of stimulated Raman adiabatic passage (STIRAP). Stark-shift-chirped rapid adiabatic-passage (SCRAP) has been shown to be far less sensitive to inhomogeneous broadening than STIRAP, a population transfer technique to which it is closely related. We further optimize the pulses used in SCRAP to be even less sensitive to inhomogeneous broadening in a {lambda}-type three-level system. The optimized pulses perform at a higher fidelity than the standard Gaussian pulses for a wide range of detunings (i.e., large inhomogeneous broadening)

74 ATOMIC AND MOLECULAR PHYSICS↗

Casimir-Polder interaction between an atom and an infinite boundary in a thermal bath

We study the energy level shift of a static two-level atom interacting with a massless scalar field in a thermal bath with the presence of a plane boundary, which gives rise to the Casimir-Polder force. We separately calculate contributions of both thermal fluctuations and radiation reaction using the formalism suggested by J. Dalibard, J. Dupont-Roc, and C. Cohen-Tannoudji [J. Phys. (France) 43, 1617 (1982); 45, 673 (1984)] and analyze in detail the behaviors of the total energy level shifts in three distinct distance regimes in both the low- and high-temperature limits. A comparison of our results with those of a uniformly accelerated atom reveals that uniformly accelerated atoms, in general, do not behave the same as static ones in a thermal bath at the Unruh temperature in terms of the atomic energy level shifts.

74 ATOMIC AND MOLECULAR PHYSICS↗

The integrated adjustment of chlorine substitution and two-dimensional side chain of low band gap polymers in organic solar cells

A series of conjugated T2 polymers (PBBF1-T2 and PBBCl1-T2), and T3 polymers (PBBF1-T3, PBBCl1-T3 and PBBCl2-T3) were synthesized using chlorinated/fluorinated benzothiadiazole (BT) and the two-dimensional benzo[1,2-b:4,5-b']dithiophene (BDT) units as the building blocks. When compared to the fluorinated polymer, the performance of the polymer photovoltaic devices showed that these chlorinated polymers gave extended optical absorption spectrum, and lower highest occupied molecular orbital (HOMO) energy levels. The introduction of chlorine atoms increases the twist angle between the polymer backbones, and led to a lower HOMO energy level and resulted in the increase of open circuit voltage (V oc) up to 0.84 V in PBBCl2-T3 based devices with a two chlorine substitution. However, the device based on PBBCl1-T3 with only one chlorine atom exhibited the best power conversion efficiency (PCE) which was as high as 6.87% with a V oc of 0.73 V, and this was about 10% higher than that of its fluorinated analogs. Here, this result indicated that the introduction of chlorine atoms into polymers is not only a simple route to synthesize a large amount of material and which avoids the tedious synthesis steps in widely used fluorinated polymers, but it is also a feasible and effective strategy to fine tune the energy level of polymer solar cell with optimized PCE. Furthermore, it is worth noting that the introduction of longer π-conjugation side chains could minimize the influence of chlorine substitution by reducing the twist angle between the polymer backbones, which would reduce the gap of V oc between the chlorinated polymers and their fluorinated analogs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible light stimulating dual-wavelength emission and O vacancy involved energy transfer behavior in luminescence for coaxial nanocable arrays

We report a strategy to investigate O vacancy (V{sub O}) involved energy transfer and dual-wavelength yellow emission in coaxial nanocable. By electric field deposition and subsequent sol-gel template approach, ZnO:Tb/Y{sub 2}O{sub 3}:Eu coaxial nanocable arrays are synthesized. After visible light excitation, system is promoted to O vacancy charge transfer state of V{sub O}(0/+). In the following cross relaxation, energy transfer from V{sub O} to the excitation energy level of Tb{sup 3+} in ZnO:Tb core area. While in Y{sub 2}O{sub 3}:Eu shell area, energy transfer to the excitation energy level of Eu{sup 3+}. Subsequently, dual-wavelength emission is observed. By constructing nanocable with dual-wavelength emission, yellow luminescence is obtained. Adjust doping concentration of Eu{sup 3+} or Tb{sup 3+} in the range of 0.01–0.05, chromaticity coordinates of ZnO:Tb/Y{sub 2}O{sub 3}:Eu nanocable stably stays at yellow region in color space except ZnO:Tb{sub 0.01}/Y{sub 2}O{sub 3}:Eu{sub 0.01}. As Vo states act as media in energy transfer process in nanocablers, visible light can stimulate dual-wavelength emissions. Yellow luminescent nanocable arrays will have great applications in light-emitting diode luminescence.

77 NANOSCIENCE AND NANOTECHNOLOGY↗