Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPERIMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

ICRF mode conversion in three-ion species heating experiment and in flow drive experiment on the Alcator C-Mod tokamak

In recent three-ion species (majority D and H plus a trace level of 3He) ICRF heating experiments on Alcator C-Mod, double mode conversion on both sides of the 3He cyclotron resonance has been observed using the phase contrast imaging (PCI) system. The MC locations are used to estimate the species concentrations in the plasma. Simulation using TORIC shows that with the 3He level <1%, most RF power is absorbed by the 3He ions and the process can generate energetic 3He ions. In mode conversion (MC) flow drive experiment in D(3He) plasma at 8 T, MC waves were also monitored by PCI. The MC ion cyclotron wave (ICW) amplitude and wavenumber kR have been found to correlate with the flow drive force. The MC efficiency, wave-number k of the MC ICW and their dependence on plasma parameters like Te0 have been studied. Based on the experimental observation and numerical study of the dispersion solutions, a hypothesis of the flow drive mechanism has been proposed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analyses of requirements for computer control and data processing experiment subsystems. Volume 1: ATM experiment S-056 image data processing system techniques development

The solar imaging X-ray telescope experiment (designated the S-056 experiment) is described. It will photograph the sun in the far ultraviolet or soft X-ray region. Because of the imaging characteristics of this telescope and the necessity of using special techniques for capturing images on film at these wave lengths, methods were developed for computer processing of the photographs. The problems of image restoration were addressed to develop and test digital computer techniques for applying a deconvolution process to restore overall S-056 image quality. Additional techniques for reducing or eliminating the effects of noise and nonlinearity in S-056 photographs were developed.

Source record↗

ATS-5 signal characteristics at 15.3 GHz and related experiments at 15 and 35 GHz. Part 1: Basic features of the experiments and primary results

The results are presented of observations by the University of Texas of the 15.3 GHz experiment associated with the ATS-5 satellite and of related experiments designed to provide information on earth-satellite communication links at 15.3 and 31.65 GHz. The 15.3 GHz transmissions were observed at Austin, Texas over an eighteen month interval primarily during periods of rain. Measurements were also made at Mount Locke, near Fort Davis, Texas but only for a period of two months. Essentially continuous measurements were made at Austin, Texas of the sky temperature at 35 GHz looking in the direction of the ATS-5 satellite over an interval of four months. Point-to-point transmissions over the earth's surface at 15 and 35 GHz and various meteorological parameters were studied as possible means of predicting performance over a satellite-earth path.

Straiton, A. W.↗

Apollo experience report: Apollo lunar surface experiments package data processing system

Apollo Program experience in the processing of scientific data from the Apollo lunar surface experiments package, in which computers and associated hardware and software were used, is summarized. The facility developed for the preprocessing of the lunar science data is described, as are several computer facilities and programs used by the Principal Investigators. The handling, processing, and analyzing of lunar science data and the interface with the Principal Investigators are discussed. Pertinent problems that arose in the development of the data processing schemes are discussed so that future programs may benefit from the solutions to the problems. The evolution of the data processing techniques for lunar science data related to recommendations for future programs of this type.

Eason, R. L.↗

Apollo experience report. Crew-support activities for experiments performed during manned space flight

Experiments are performed during manned space flights in an attempt to acquire knowledge that can advance science and technology or that can be applied to operational techniques for future space flights. A description is given of the procedures that the personnel who are directly assigned to the function of crew support at the NASA Lyndon B. Johnson Space Center use to prepare for and to conduct experiments during space flight.

Mckee, J. W.↗

AAFE man-made noise experiment project. Volume 2: Project and experiment discussions

An experiment for the acquisition and processing of man-made noise interference data on earth orbital altitudes is discussed. The objectives of the project are to confirm the results of analytical studies concerning radio frequency man-made noise in space. It is stated that the measurements of the amounts and types of noise in frequency bands of interest could allow the allocation and utilization of frequencies to be optimized and would also contribute to the engineering objective of optimizing flight receiving systems. A second objective of the project was to design and fabricate a noise measuring receiver which would demonstrate the feasibility of the experiment design under the project. The procedures for acquiring and processing the electromagnetic radiation data are discussed.

Source record↗

Ames Heat Pipe Experiment (AHPE) experiment description document

A gas-controlled variable-conductance heat pipe was qualified for flight aboard orbiting astronomical observatory (OAO3). Experiments were conducted to determine the performance and reliability of the pipe in the vacuum environment of space, and to demonstrate in a specific engineering application its effectiveness in providing temperature stability for spacecraft equipment which experiences varying electronic duty cycles and changing thermal boundary conditions. System design and hardware are discussed in detail.

Marcus, B. D.↗

Atmospheric variability experiment /AVE II/ pilot experiment

The Atmospheric Variability Experiment (AVE II) was conducted in May 1974. Rawinsonde releases were made at 54 upper-air stations in two thirds of the eastern U.S. at 3-hr intervals for a 24-hr period. Radar data were obtained from 11 stations located near the center of the observational area, and as many data as possible were collected from the Nimbus 5, NOAA 2, ATS-3, and DMSP satellites. The present paper provides an overview of the experiment and describes how the user community can obtain copies of the data.

Turner, R. E.↗

Experiment definition phase shuttle laboratory. LDRL-10.6 experiment

The work completed on the experiment definition phase of the shuttle laboratory LDRL 10.6 micrometers experiment from 27 September 1975 to 26 January 1976 was reported. This work included progress in the following areas: (1) optomechanical system: completion of detail drawings, completion of the beryllium subassembly, fabrication, checking, and weighing of approximately 95% of the detailed parts, dry film lubrication of the bearings and gears, and initiation of assembly of the gimbals; (2) optics: update of the detailed optical layout, receipt of nine mirrors and the pre-expander; (3) miscellaneous: delivery of draft material for the final report, completion of optical testing of the 10.6 micrometers receiver, and receipt, assembly, and checkout of NASA test console.

Source record↗

Principles of equivalence, Eotvos experiments, and gravitational red-shift experiments - The free fall of electromagnetic systems to post-post-Coulombian order

Free fall in an external static gravitational field of a composite test body consisting of electromagnetically interacting charged particles is analyzed using the TH-epsilon-mu formalism developed by Lightman and Lee (1973). The Lightman and Lee calculation that was carried out to 'post-Coulombian' order is extended to 'post-post-Coulombian' order, and violations of the weak equivalence principle are found which result from the magnetostatic self-energy of the test body. The current generation of Eotvos experiments is shown to test the cited formalism at first order in the external gravitational potential to an accuracy of 4 by 10 to the -10th power for electrostatic energies and 6 by 10 to the -6th power for magnetostatic energies. It is concluded that although the formalism can be tested to an accuracy of 0.04 for electrostatic energies at second order in the gravitational potential, a significant second-order test for magnetostatic energies would require Eotvos experiments accurate to better than one part in 10 to the 15th power.

Haugan, M. P.↗

Definition of Atmospheric Science Experiments and Techniques: Wake Zone Mapping Experiments

The development of a subsatellite system has been proposed for the shuttle program which would provide to the scientific community a platform for experiments which would be tethered to the shuttle spacecraft orbiting at about 200 km altitude. Experiments which can perform measurements of aeronomic interest onboard or utilizing the tethered satellite concept are described and recommended.

Taeusch, D. R.↗

ISEE-1 and ISEE-2 fast plasma experiment and the ISEE-1 solar wind experiment

Identical fast plasma experiment (FPE) systems were placed on the ISEE-1 and ISEE-2 spacecraft. The FPE consists of three high efficiency 90 deg spherical section electrostatic analyzers using large secondary emitters and discrete dynode multipliers to detect analyzed particles. Two of them, viewing in opposite directions, produce complete 2D velocity distribution measurements of both protons and electrons every spacecraft revolution. A third FPE analyzer with a divided emitter measures 3D distributions at a slower rate. ISEE-1 also carries a solar-wind experiment (SWE) to measure solar-wind ions with high resolution. The SWE is composed of two 150 deg spherical section analyzers using the same set of plates. The two acceptance fans are tilted with respect to each other so that 3D characteristics of the ion distributions can be derived.

Bame, S. J.↗

The 30/20 GHz flight experiment system, phase 2. Volume 2: Experiment system description

A detailed technical description of the 30/20 GHz flight experiment system is presented. The overall communication system is described with performance analyses, communication operations, and experiment plans. Hardware descriptions of the payload are given with the tradeoff studies that led to the final design. The spacecraft bus which carries the payload is discussed and its interface with the launch vehicle system is described. Finally, the hardwares and the operations of the terrestrial segment are presented.

Bronstein, L.↗

AgRISTARS. Preliminary technical results review of FY81 experiments, volume 2: Fiscal year 1981/1982 "corn and soybeans pilot" experiment

The performance of the technology exhibited significant proportion estimation errors, specifically, high mean error in both corn and soybeans area estimation. The data systems, technical approaches, and data assessment of the pilot experiment were reviewed. Results of proportion estimations procedure performance evaluations, and sensitivity evaluations are presented. The role of the pilot experiment in foreign technology development is discussed.

Source record↗

Solar Array Experiment (SAE) Flight Experience

The space flight testing of a large, flat, flexible panel solar array is examined. The experiment objectives are: to demonstrate the functional operational of the wind deployment and packaging system; Electrical performance; Thermal performance; and dynamic performance. A complete description of the experiment and the flight results are given.

Hill, H. C.↗