Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXIT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Neutron Characterization of 3D Printed Gas Turbine Alloy With Internal Cooling Structure

The objective of this research work is to investigate the residual strains induced by the presence of a exit hole and internal hollow geometry present in a 3D printed IN718 similar to that seen in a gas turbine blade. The specimens were manufactured with an internal hollow structure that ended with an exit hole, and fabricated by direct metal laser sintering additive manufacturing technique. Using this technique, metal powder was melted by a laser source and rapidly cooled to form the part layer by layer. Rapid heating and cooling generate large thermal gradients and residual stresses in the 3D printed material. To be aligned with industry standards, specimens were heat-treated to relieve most of the residual stresses as well as to investigate whether IN718 still preserved a nonhomogeneous stress state after the thermal treatment. Roughness and microstructure analysis was performed to understand the heat-treated sample properties. To investigate the volumetric residual strain, the neutron diffraction technique was used with a definite neutron wavelength. Bragg’s law was used to determine lattice spacing. Interplanar lattice spacing and stress-free state lattice spacings were measured to calculate the strains. Residual strains were measured in the x and y direction to understand the impact of the presence of a exit hole and internal hollow geometry. The results of volumetric residual strain in the x and y directions showed no significant variations in the distribution of the strain due to the presence of a hollow structure as well as the exit hole. Overall, no significant stress concentration was observed in the heat treated sample. Sample geometry, instrumentation for neutron diffraction, and material properties are discussed in detail in this paper.

Raju, Nandhini↗

SU-E-T-235: Monte Carlo Analysis of the Dose Enhancement in the Scalp of Patients Due to Titanium Plate Backscatter During Post-Operative Radiotherapy

Purpose: To quantify the clinically observed dose enhancement adjacent to cranial titanium fixation plates during post-operative radiotherapy. Methods: Irradiation of a titanium burr hole cover was simulated using Monte Carlo code MCNPX for a 6 MV photon spectrum to investigate backscatter dose enhancement due to increased production of secondary electrons within the titanium plate. The simulated plate was placed 3 mm deep in a water phantom, and dose deposition was tallied for 0.2 mm thick cells adjacent to the entrance and exit sides of the plate. These results were compared to a simulation excluding the presence of the titanium to calculate relative dose enhancement on the entrance and exit sides of the plate. To verify simulated results, two titanium burr hole covers (Synthes, Inc. and Biomet, Inc.) were irradiated with 6 MV photons in a solid water phantom containing GafChromic MD-55 film. The phantom was irradiated on a Varian 21EX linear accelerator at multiple gantry angles (0–180 degrees) to analyze the angular dependence of the backscattered radiation. Relative dose enhancement was quantified using computer software. Results: Monte Carlo simulations indicate a relative difference of 26.4% and 7.1% on the entrance and exit sides of the plate respectively. Film dosimetry results using a similar geometry indicate a relative difference of 13% and -10% on the entrance and exit sides of the plate respectively. Relative dose enhancement on the entrance side of the plate decreased with increasing gantry angle from 0 to 180 degrees. Conclusion: Film and simulation results demonstrate an increase in dose to structures immediately adjacent to cranial titanium fixation plates. Increased beam obliquity has shown to alleviate dose enhancement to some extent. These results are consistent with clinically observed effects.

60 APPLIED LIFE SCIENCES↗

TU-AB-303-09: Investigation of Simple Method to Guide Adaptive Radiotherapy of Head-And-Neck Treatment Using Portal Imager

Purpose: Planned dose distribution for IMRT or VMAT could be altered by tissue changes during treatment course as in head and neck patients. Thus the aim of our study is to investigate a simple method that guides decision for re-planning. We will correlate changes in exit fluence tracked through entire treatment course with the anatomical changes. Methods: Fifteen patients were planned for IMRT; weekly CT scan was registered to original CT. Volume changes of different structures were assessed for each week. Frequently integrated images were acquired for all fields twice weekly via portal imager. The delivered fluences were compared with reference images. Gamma analysis (3% and 3 mm) including maximum γ, and percentage of points with γ≥ 1, were calculated for all fields. Results: Continuous reduction in GTV, CTV1 and parotids volumes during treatment was found [median value of 5.3 (1.3–20.8), 23.8 (3.0–128.7) and 1.7 (0.5–6.3) cm3 respectively] with significant change on week 2 (p= < 0.005). Also the value of gamma area >1 parameter continued to increase, significantly (P < 0.005), starting from second week (1.8 ± 1.9%) reaching 4.1 ± 1.6% by the end of treatment. Most of these changes in the exit fluences are significantly correlated to patient anatomy variations. Pearson correlation coefficient was −0.984 (P = 0.002) and −0.984 (P = 0.014) for the maximum gamma value and the value of gamma area >1, respectively. Conclusion: The changes in exit fluences are reflecting the corresponding anatomical changes. We proposed a method to track the changes in the averaged maximum gamma value and the gamma area > 1 value for the exit fluences during treatment. Maximum gamma value of 2.6% and Maximum gamma area > 1 value of 1.8% would be useful boarder lines that if exceeded a re-planning would be recommended.

60 APPLIED LIFE SCIENCES↗

Evaluation of Uncertainties of Pressure Gain Measurements in Rotating Detonation Combustor

Experimentally measuring the pressure gain of a rotating detonation combustor through the method of equivalent available pressure is prone to many experimental uncertainties. A detailed analysis of sources of random and systematic uncertainties in the thrust and pressure gain is performed using data from a hydrogen/air-operated rotating detonation combustor. The combustor had an axial air inlet and a 50% exit constriction. The measured (negative) pressure gain values agree with the results in the literature for similar inlet-to-exit area ratios. The base drag correction on the centerbody was found to be the greatest source of uncertainty for the thrust. While thrust is the predominant source of random uncertainty in the pressure gain calculation, significant systematic errors can be committed due to the assumed exit Mach number. The impact of this assumption becomes more detrimental the closer to positive the measured pressure gain is. By experimentally evaluating the exit Mach number, the random and systematic uncertainty in pressure gain both decreased, indicating that this should be an essential step. A definitive demonstration of gain is challenging, given the assessed uncertainties, and recommendations are provided to increase the precision of the equivalent available pressure methodology.

Engineering↗

COSMIC REIONIZATION ON COMPUTERS. ULTRAVIOLET CONTINUUM SLOPES AND DUST OPACITIES IN HIGH REDSHIFT GALAXIES

We compare the properties of stellar populations of model galaxies from the Cosmic Reionization On Computers (CROC) project with the exiting ultraviolet (UV) and IR data. Since CROC simulations do not follow cosmic dust directly, we adopt two variants of the dust-follows-metals ansatz to populate model galaxies with dust. Using the dust radiative transfer code Hyperion, we compute synthetic stellar spectra, UV continuum slopes, and IR fluxes for simulated galaxies. We find that the simulation results generally match observational measurements, but, perhaps, not in full detail. The differences seem to indicate that our adopted dust-follows-metals ansatzes are not fully sufficient. While the discrepancies with the exiting data are marginal, the future James Webb Space Telescope (JWST) data will be of much higher precision, rendering highly significant any tentative difference between theory and observations. It is, therefore, likely, that in order to fully utilize the precision of JWST observations, fully dynamical modeling of dust formation, evolution, and destruction may be required.

79 ASTRONOMY AND ASTROPHYSICS↗

PTF1 J082340.04+081936.5: a hot subdwarf B star with a low-mass white dwarf companion in an 87-minute orbit

We present the discovery of the hot subdwarf B star (sdB) binary PTF1 J082340.04+081936.5. The system has an orbital period of P{sub orb} = 87.49668(1) minutes (0.060761584(10) days), making it the second-most compact sdB binary known. The light curve shows ellipsoidal variations. Under the assumption that the sdB primary is synchronized with the orbit, we find a mass of M{sub sdB}=0.45{sub −0.07}{sup +0.09} M{sub ⊙}, a companion white dwarf mass of M{sub WD}=0.46{sub −0.09}{sup +0.12} M{sub ⊙}, and a mass ratio of q=((M{sub WD})/(M{sub sdB}))=1.03{sub −0.08}{sup +0.10}. The future evolution was calculated using the MESA stellar evolution code. Adopting a canonical sdB mass of M{sub sdB}=0.47 M{sub ⊙}, we find that the sdB still burns helium at the time it will fill its Roche lobe if the orbital period was less than 106 minutes at the exit from the last common envelope (CE) phase. For longer CE exit periods, the sdB will have stopped burning helium and turned into a C/O white dwarf at the time of contact. Comparing the spectroscopically derived logg and T{sub eff} with our MESA models, we find that an sdB model with a hydrogen envelope mass of 5×10{sup −4} M{sub ⊙} matches the measurements at a post-CE age of 94 Myr, corresponding to a post-CE orbital period of 109 minutes, which is close to the limit to start accretion while the sdB is still burning helium.

79 ASTRONOMY AND ASTROPHYSICS↗

Computer program for preliminary design analysis of axial-flow turbines

The program method is based on a mean-diameter flow analysis. Input design requirements include power or pressure ratio, flow, temperature, pressure, and speed. Turbine designs are generated for any specified number of stages and for any of three types of velocity diagrams (symmetrical, zero exit swirl, or impulse). Exit turning vanes can be included in the design. Program output includes inlet and exit annulus dimensions, exit temperature and pressure, total and static efficiencies, blading angles, and last-stage critical velocity ratios. The report presents the analysis method, a description of input and output with sample cases, and the program listing.

Glassman, A. J.↗

Normal impingement loads due to small air jets issuing from a base plate and reflecting off a platform for various jet Mach numbers, separation distances, and ambient pressures

An investigation was conducted in a 12.5-meter-diameter vacuum sphere to determine the impingement loads due to air jets issuing from and perpendicular to a circular base and reflecting off a square platform, that is, a simulation of rendezvous maneuvering, docking, launch, impact dampers etc. The nozzles had exit Mach numbers of 1, 3, 5, and 7. The ambient pressures were 0.0006, 5, 225, and 760 torr. Under near-field separation distances and at 0.0006 torr, reflections were significant; and ratios of the impingement force to thrust on both plates in the biplane arrangement varied from about 750 for exit Mach number 1 to 120 for exit Mach number 7. The far-field force ratios were near unity for the platform and zero for the base and indicated few, if any, reflections. Some reversals and rapid changes in loads were obtained at transition distances between the near and far fields. In general, increasing the exit Mach number or ambient pressure reduced the impingement loads.

Hoffman, S.↗

Boundary-layer analysis of subsonic inlet diffuser geometries for engines nacelles

Theoretical Mach number distributions and boundary-layer parameters are presented for subsonic nacelle inlet diffuser geometries with length to exit diameter ratios ranging from 0.4 to 1.6 and diffuser exit area to throat area ratios ranging from 1.1 to 2.0. The major portion of the study was done with a cubic diffuser contour with the inflection point at the midpoint of the diffuser, a diffuser throat Mach number of 0.6, and a free-stream Mach number of 0.12. Calculations were performed at both model (diffuser exit diameter, 30.5 cm) and full-scale (diffuser exit diameter, 183 cm) sizes. Separation limits were defined by establishing a separation boundary on plots of diffuser area ratio as a function of diffuser length to diameter ratio. The effects of diffuser contour, inlet lip geometry, and throat Mach number on the boundary-layer characteristics are illustrated. The major results of the study indicate that the separation boundary is shifted to greater area ratios by (1) increasing the diffuser length, (2) increasing the scale of the diffuser and, (3) moving the inflection point of the diffuser contour to or ahead of the midpoint of the diffuser.

Albers, J. A.↗

Research on free and impinging jets for the development of STOL aircraft

The effect of the exit plane conditions on the initial region of an axisymmetric jet was systematically investigated. An essentially top-hat mean velocity profile and a homogeneous turbulence structure were maintained at the exit plane for eight distinct scale and intensity conditions. Mass and momentum flux values are independent of the exit turbulence structure for the range investigated; however, a significant (approximately 25%) increase in the latter implies a pronounced static pressure decrement inside the jet. Details of the velocity profile and turbulence structure are influenced by the exit plane conditions. The three radial-axial components of the Reynolds stress tensor have been conditionally sampled and are analyzed to show the initial condition effects.

Foss, J. F.↗

Jet engine exhaust noise due to rough combustion and nonsteady aerodynamic sources

Internal sources are accounted for in terms of fluctuations of mass and momentum at the nozzle exit plane. At low Mach numbers, mass flow fluctuations generated at the exit plane by acoustic resonant type fluctuations inside the engine are found to be dominant. In the subsonic Mach number range between 0.3 and 0.5, exit plane mass flow fluctuations at frequencies characteristic of turbulence become most dominant. Above Mach 0.5, the turbulent momentum fluctuations at the exit plane become dominant, and the jet contribution is not found significant at subsonic speeds.

Plett, E. G.↗

Aerodynamic performance of a fully film cooled core turbine vane tested with cold air in a two-dimensional cascade

The aerodynamic performance of a fully film cooled core turbine vane was investigated experimentally in a two-dimensional cascade of 10 vanes. Three of the 10 vanes were cooled; the others were solid (uncooled) vanes. Cold air was used for both the primary and coolant flows. The cascade test covered a range of pressure ratios corresponding to ideal exit critical velocity ratios of 0.6 to 0.95 and a range of coolant flow rates to 7.5 percent of the primary flow. The coolant flow was varied by changing the coolant supply pressure. The principal measurements were cross-channel surveys of exit total pressure, static pressure, and flow angle. The results presented include exit survey data and overall performance in terms of loss, flow angle, and weight flow for the range of exit velocity ratios and coolant flows investigated. The performance of the cooled vane is compared with the performance of an uncooled vane of the same profile and also with the performance obtained with a single cooled vane in the 10-vane cascade.

Stabe, R. G.↗

Flow characteristics in an expansion tunnel as inferred from velocity measurements

A photoionization technique was used to study flow characteristics in an expansion tunnel. Vertical surveys of the axial component of flow velocity just downstream from the nozzle exit were obtained, and estimates of freestream density were inferred from the velocity measurement technique. The pitot pressure was measured and compared to the average axial component of velocity as a function of time for the two cases when air and CO2 were used as test gases. Vertical velocity and static density profiles at the nozzle exit are presented for the case when CO2 was used as test gas. Experimental results were used to determine the diameter and uniformity of the test core at the nozzle exit and the duration of the quasi-steady flow period. These data are relevant to evaluation of the suitability of operating an expansion tube as an expansion tunnel. The expansion tunnel is an expansion tube with a conical nozzle positioned at the exit of the acceleration section, so that nozzle entrance flow conditions are hypersonic and characterized by hypervelocity.

Miller, C. G.↗

Experimental results of large-scale structures in jet flows and their relation to jet noise production

Experiments have been performed to determine the role of large-scale turbulent structures in the production of jet noise. Axisymmetric turbulent jet flows at ambient stagnation temperature have been observed with the aid of flow visualization techniques. Jet Mach numbers at the nozzle exit ranged between 0.1 and 0.9, and the Reynolds number, based on nozzle exit diameter, was approximately 10 to the 6th. Large organized turbulent structures existed as far downstream of the nozzle exit as 7 diameters. High-speed schlieren motion pictures synchronized with near-field pressure measurements of an excited jet indicated that strong instantaneous peaks in the pressure signal occurred whenever a merging process between two large-scale organized structures occurred. This pressure pulse propagated at a speed which was somewhat larger than the velocity of the jet at the nozzle exit.

Sarohia, V.↗

Investigation of impingement region and wall jets formed by the interaction of high aspect ratio lift jets and a ground plane

Flow characteristics of impinging jets emanating from rectangular exit area converging nozzles of exit area aspect ratio four, six, and eight were investigated. Azimuthal distributions of wall jet radial momentum flux in the ground plane were strongly directional and sensitive to rectangular nozzle exit area aspect ratio, jet impingement angle, and height above ground, H/D. Effects of jet exit velocity profile nonuniformities were also investigated. Data from the single nozzle rectangular jet impringement investigations were incorporated into an existing VTOL aircraft ground flow field computer program. It is suggested that this program together with the Douglas Neumann program modified for V/STOL applications may be used for the analysis and prediction of flow fields and resulting forces and moments on multijet V/STOL aircraft hovering in ground effect.

Kotansky, D. R.↗

Characteristics of wall jets produced by the impingement on a ground plane of rectangular jets of aspect ratio one through eight

The azimuthal distributions of wall jet radial momentum flux have been experimentally determined for the impingement of turbulent jets emanating from rectangular nozzles with exit area aspect ratios between one and eight. Data are presented for parametric variations in nozzle exit height, nozzle pressure ratio and jet impingement angle caused by rotation of the nozzle about the nozzle exit major and minor axes. The momentum flux distributions were found to be highly directional and sensitive to variations in the above parameters. The effect of nozzle spacing on the fountain normal force measured between a pair of aspect-ratio-two nozzles is also presented. Examples are given in which stagnation line calculations for two rectangular exit area nozzle configurations are compared with experimental results.

Kotansky, D. R.↗

Tests of a D vented thrust deflecting nozzle behind a simulated turbofan engine

A D vented thrust deflecting nozzle applicable to subsonic V/STOL aircraft was tested behind a simulated turbofan engine in the verticle thrust stand. Nozzle thrust, fan operating characteristics, nozzle entrance conditions, and static pressures were measured. Nozzle performance was measured for variations in exit area and thrust deflection angle. Six core nozzle configurations, the effect of core exit axial location, mismatched core and fan stream nozzle pressure ratios, and yaw vane presence were evaluated. Core nozzle configuration affected performance at normal and engine out operating conditions. Highest vectored nozzle performance resulted for a given exit area when core and fan stream pressure were equal. Its is concluded that high nozzle performance can be maintained at both normal and engine out conditions through control of the nozzle entrance Mach number with a variable exit area.

Watson, T. L.↗

Statistical theory for estimating sampling errors of regional radiation averages based on satellite measurements

The processes which determine the weather and climate are driven by the radiation received by the earth and the radiation subsequently emitted. A knowledge of the absorbed and emitted components of radiation is thus fundamental for the study of these processes. In connection with the desire to improve the quality of long-range forecasting, NASA is developing the Earth Radiation Budget Experiment (ERBE), consisting of a three-channel scanning radiometer and a package of nonscanning radiometers. A set of these instruments is to be flown on both the NOAA-F and NOAA-G spacecraft, in sun-synchronous orbits, and on an Earth Radiation Budget Satellite. The purpose of the scanning radiometer is to obtain measurements from which the average reflected solar radiant exitance and the average earth-emitted radiant exitance at a reference level can be established. The estimate of regional average exitance obtained will not exactly equal the true value of the regional average exitance, but will differ due to spatial sampling. A method is presented for evaluating this spatial sampling error.

Smith, G. L.↗