Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EVAPORATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Platform-agnostic waveguide integration of high-speed photodetectors with evaporated tellurium thin films

Many attractive photonics platforms still lack integrated photodetectors due to inherent material incompatibilities and lack of process scalability, preventing their widespread deployment. Here, we address the problem of scalably integrating photodetectors in a photonics-platform-independent manner. Using a thermal evaporation and deposition technique developed for nanoelectronics, we show that tellurium, a quasi-2D semi-conductive element, can be evaporated at low temperatures directly onto photonic chips to form air-stable, high-speed, ultrawide-band photodetectors. We demonstrate detection from visible (520 nm) to short-wave infrared (2.4 µm), a bandwidth of more than 40 GHz, and platform-independent scalable integration with photonic structures in silicon, silicon nitride, and lithium niobate.

42 ENGINEERING↗

Results Of Groundwater Monitoring for The 183-H Solar Evaporation Basins And 300 Area Process Trenches January-June 2010

This is one of a series of reports on Resource Conservation and Recovery Act of 1976 monitoring at the 183-H Solar Evaporation Basins and the 300 Area Process Trenches. It fulfills the requirement of Washington Administrative Code (WAC) 173-303-645(11) to report twice each year on the effectiveness of the corrective action program. This report covers the period from January through June 2010. The concentrations of 183-H Solar Evaporation Basins contaminants remained below applicable concentration limits during the reporting period. The most recent exceedance of a concentration limit was May 2007. The overall concentration of uranium in 300 Area Process Trenches wells remained above the 20 μg/L concentration limit in the three downgradient wells screened at the water table. Fluctuations of uranium concentration are caused by changes in river stage. The concentration of cis-l ,2-dichloroethene remained above the 70 {micro}g/L concentration limit in one deep well (399-1-16B). Concentrations are relatively steady at this well and are not affected by river stage. Trichloroethene concentrations were below detection limits in all wells during the reporting period.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Improvement to Air2Air™ Technology to Reduce Fresh-Water Evaporative Cooling Loss at Coal-Based Thermoelectric Power Plants

This program was undertaken to enhance the manufacturability, constructability, and cost of the Air2Air™ Water Conservation and Plume Abatement Cooling Tower, giving a validated cost basis and capability. Air2Air™ water conservation technology recovers a portion of the traditional cooling tower evaporate. The Condensing Module provides an air-to-air heat exchanger above the wet fill media, extracting the heat from the hot saturated moist air leaving in the cooling tower and condensing water. The rate of evaporate water recovery is typically 10% - 25% annually, depending on the cooling tower location (climate). This program improved the efficiency and cost of the Air2Air™ Water Conservation Cooling Tower capability, and led to the first commercial sale of the product, as described.

20 FOSSIL-FUELED POWER PLANTS↗

New Adsorbents for Vehicle Exhaust and Evaporative Emission Control

Vehicle cold start hydrocarbon emissions occur before the exhaust catalyst warm up. Therefore, we have to trap/adsorb the hydrocarbons and hold them until the catalyst warms up to light off temperatures. There are many zeolite adsorbents that can adsorb cold start exhaust hydrocarbons but they desorb them before the catalyst lights off. The adsorbent required for this purpose should be able to adsorb the hydrocarbons and hold them (not desorb at temperatures below 250 to 300°C) until the catalyst warms up to light off temperature (-300°C) so that the catalyst will be ready to oxidize the hydrocarbons when they are desorbed. Vehicle evaporative fuel vapors, which consists of diurnal (due to daily temperature cycles), running loss (due to tank fuel heating by engine heat), and refueling gasoline vapors, are trapped/adsorbed in an activated carbon canister. When the engine is running, the trapped vapors are purged (desorbed) and consumed in engine combustion. The purging is accomplished by drawing ambient air through the canister using engine manifold vacuum. If the activated carbon canister is not purged or cleaned properly, the hydrocarbons will breakthrough in subsequent loading, which results in evaporative hydrocarbon emissions into the atmosphere.

99 GENERAL AND MISCELLANEOUS↗

Results of Hg Speciation Testing on Tank 38 and 2H Evaporator Overhead Tank (OHT-1) Materials

The Savannah River National Laboratory (SRNL) was tasked with preparing and shipping samples for Hg speciation by Eurofins Frontier Global Sciences, Inc. in Seattle, WA on behalf of the Savannah River Remediation (SRR) Mercury Task Team. The seventh shipment of samples was designated to include two Tank 38 (2H Evaporator System Drop Tank) samples: a surface sample (HTF-38-15-48) and a variable depth sample taken at 265” (HTF-38-15-50). The third sample submitted was from the 2H Evaporator Overhead Tank (OHT) #1. All samples were received by SRNL on May 11, 2015. The OHT-1 was not placed in the SRNL Shielded Cells but was instead placed in a refrigerator in 773-A, B-wing upon receipt and kept at 4°C. The Tank 38 samples were left in their stainless steel dip bottles until they were opened and an aliquot of each diluted 1:10 with Eurofins deionized water on June 1, 2015. Following initial dilution in the Shielded Cells, the diluted Tank 38 samples were immediately moved to refrigeration and kept in the dark until prepared for shipment to Eurofins.

54 ENVIRONMENTAL SCIENCES↗

Results of HG Speciation Testing on Tank 43 and 2H Evaporator Overhead Tank (OHT-2) Materials

The Savannah River National Laboratory (SRNL) was tasked with preparing and shipping samples for Hg speciation by Eurofins Frontier Global Sciences, Inc. in Seattle, WA on behalf of the Savannah River Remediation (SRR) Mercury Task Team. The eighth shipment of samples was designated to include two Tank 43 (2H Evaporator System Feed Tank) samples: a surface sample (HTF-43-15-52) and a variable depth sample taken at 161” (HTF-43-15-54). The third sample submitted was from the 2H Evaporator Overhead Tank (OHT) #2. All samples were received by SRNL on May 11, 2015. The OHT-2 was not placed in the SRNL Shielded Cells but was instead placed in a refrigerator in 773-A, B-wing upon receipt and kept at 4°C. The Tank 43 samples were left in their stainless steel dip bottles until they were opened and an aliquot of each diluted 1:10 with Eurofins deionized water on June 3, 2015. Following initial dilution in the Shielded Cells, the diluted Tank 43 samples were immediately moved to refrigeration and kept in the dark until prepared for shipment to Eurofins.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Addressing Water Consumption of Evaporative Coolers with Greywater

Evaporative coolers (ECs) provide significant gains in energy efficiency compared to vapor compression air conditioners, but simultaneously have significant onsite water demand. This can be a major barrier to deployment in areas of the world with hot and arid climates. To address this concern, this study determined where in the world evaporative cooling is suitable, the water consumption of ECs in these cities, and the potential that greywater can be used reduce the consumption of potable water in ECs. ECs covered 69percent of the cities where room air conditioners are may be deployed, based on comfort conditions alone. The average water consumption due to ECs was found to be 400 L/household/day in the United States and Australia, with the potential for greywater to provide 50percent this amount. In the rest of the world, the average water consumption was 250 L/household/day, with the potential for greywater to supply 80percent of this amount. Home size was the main factor that contributed to this difference. In the Mediterranean, the Middle East, Northern India, and the Midwestern and Southwestern United States alkalinity levels are high and water used for bleeding will likely contribute significantly to EC water consumption. Although technically feasible, upfront costs for household GW systems are currently high. In both developed and developing parts of the world, however, a direct EC and GW system is cost competitive with conventional vapor compression air conditioners. Moreover, in regions of the world that face problems of water scarcity the benefits can substantially outweigh the costs.

25 ENERGY STORAGE↗

Reevaluation Of The Risk Of Solids Formation In The 2h Evaporator System

Savannah River Remediation (SRR) Tank Farm Engineering requested further technical assistance from the Savannah River National Laboratory (SRNL) to reassess the risk of solids formation in the 2H Evaporator system following feed tank and drop tank blending operations conducted between 12/15/2018 and 1/6/2019. OLI aqueous electrolyte model simulations were completed for three variable-depth, post-blending liquid waste samples collected from Tank 43 on 1/27/2019. The purpose of the new simulations is to provide guidance to SRR on a recommended maximum overhead-to-feed volume ratio to avoid unwanted solids formation upon restart of the 2H Evaporator.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Permanganate Oxidation of Actual Defense Waste Processing Facility (DWPF) Slurry Mix Evaporator Condensate Tank (SMECT) and Offgas Condensate Tank (OGCT) Samples to Remediate Glycolate

Savannah River Remediation (SRR) tasked Savannah River National Laboratory (SRNL) to examine glycolate destruction in radioactive samples emulating the proposed process. Experiments with radioactive Defense Waste Processing Facility (DWPF) condensates were performed to demonstrate the oxidation of glycolate using sodium permanganate. One test each was performed for Off-Gas Condensate Tank (OGCT) and Slurry Mix Evaporator Condensate Tank (SMECT) samples received. Condensates were blended with Recycle Collection Tank (RCT) heel simulant and Slurry Mix Evaporator (SME) product containing glycolate to represent typical RCT compositions with estimated nominal entrainment of glycolate. A permanganate to glycolate (P/G) molar ratio targeting 5.7 decreased sample glycolate concentration below Ion Chromatography (IC), glycolate method reporting limits in less than 2 hours for the OGCT sample and in less than 8 hours for the SMECT sample.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization Results for the April 2022 Tank Farm 2H Evaporator Overhead Sample

On an annual basis, Savannah River Mission Completion (SRMC) provides 2H and 3H evaporator overhead samples to Savannah River National Lab (SRNL) to be analyzed per Section 5.2 of the Effluent Treatment Project (ETP) Waste Compliance Plan (WCP) and the Waste Acceptance Criteria (WAC). This report presents characterization results for the April 2022 2H evaporator overhead sample. The sample was clear and colorless with no visible solids. The results provide measurements for cesium-137 ( 137 Cs), strontium-90 ( 90 Sr), and iodine-129 ( 129 I) with the radionuclide concentration limits specified by the WAC.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization Results for the March 2023 Tank Farm 2H Evaporator Overhead Sample

On an annual basis, Savannah River Mission Completion (SRMC) provides 2H and 3H evaporator overhead samples to Savannah River National Lab (SRNL) to be analyzed per Section 5.2 of the Effluent Treatment Project (ETP) Waste Compliance Plan (WCP) and the Waste Acceptance Criteria (WAC). This report presents characterization results for the March 2023 2H evaporator overhead sample. The sample was clear and colorless with no visible solids. The results provide measurements for cesium-137 ( 137 Cs), strontium-90 ( 90 Sr), and iodine-129 ( 129 I) with the radionuclide concentration limits specified by the WAC.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Life Expectancy of Evaporating Capillary Bridges Predicted by Tertiary Creep Modeling

The evaporation of capillary bridges is experimentally investigated at the microscale through a three-grain capillary cluster. This setting provides the minimum viable description of Haines jumps during evaporation, that is, capillary instabilities stemming from air entry into a saturated granular material. The displacement profile of a meniscus is obtained via digital image correlation for different grain materials, geometries, and separations. While it is well known that Haines jumps are triggered at the pore throat, we find that these instabilities are of three types depending on the separation. We also provide a temporal characterization of Haines jumps; we find that they are accurately described, as tertiary creep instabilities, by Voight’s relation, similarly to landslides and volcanic eruptions. This finding extends the description of capillary instabilities beyond their onset predicted by Laplace equilibrium. Our contribution also paves the way for a microscopically-informed description of desiccation cracks, of which Haines jumps are the precursors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Explosive Chromospheric Evaporation and Warm Rain in a C3.1 Flare Observed by IRIS, Hinode/EIS, and RHESSI

IRIS and EIS observed a GOES C3.1 flare in stare mode on 2014 March 15. The GOES flare started at 00:21:35 and peaked at 00:26:30 UT. The IRIS slit pointed near the center of the flare, while the EIS slit pointed 35{sup ′′} to its west. About 4 minutes before the GOES flare start, the IRIS C ii and Si iv intensities became (and remained) greater than their pre-flare averages, indicating that the flare had begun and that the chromosphere and transition region were involved. IRIS first detected blueshifted Fe xxi emission at 00:22:42 UT, by which time the C ii and Si iv intensities had increased by factors around 100 and their profiles were redshifted. Simultaneous, cospatial blueshifted Fe xxi emission with redshifted C ii and Si iv emission indicates explosive chromospheric evaporation. EIS spectra reveal Fe xxiii emission that is too weak to measure velocities, and intensity enhancements by factors about 1.7 in the Fe xiv and Fe xvi emission. Lines from both of these coronal ions show redshifts ≈9 km s{sup −1} around 00:24:00 UT, and the Fe xiv 264.7/274.2 intensity ratio reveals an increase of n {sub e} from (1.03±0.20)×10{sup 9} before to (3.58±0.68)×10{sup 9} cm{sup −3} during the flare. The redshifted coronal line emission and increased n {sub e} are consistent with warm rain falling and accumulating in the remote area observed by EIS. A fit to the RHESSI hard X-ray spectrum yields a nonthermal energy injection rate of 4.9×10{sup 26} erg s{sup −1}, from which we estimate a HXR beam energy flux range consistent with explosive evaporation.

79 ASTRONOMY AND ASTROPHYSICS↗

Distillation-based Droplet Modeling of Non-Ideal Oxygenated Gasoline Blends: Investigating the Role of Droplet Evaporation on PM Emissions

In some studies, a relationship has been observed between increasing ethanol content in gasoline and increased particulate matter (PM) emissions from vehicles equipped with spark ignition engines. The fundamental cause of the PM increase seen for moderate ethanol concentrations is not well understood. Ethanol features a greater heat of vaporization (HOV) than gasoline and also influences vaporization by altering the liquid and vapor composition throughout the distillation process. A droplet vaporization model was developed to explore ethanol's effect on the evaporation of aromatic compounds known to be PM precursors. The evolving droplet composition is modeled as a distillation process, with non-ideal interactions between oxygenates and hydrocarbons accounted for using UNIFAC group contribution theory. Predicted composition and distillation curves were validated by experiments. Detailed hydrocarbon analysis was applied to fuel samples and to distillate fractions, and used as input for the initial droplet composition. With composition calculated throughout the distillation, the changing HOV and other physical properties can be found using reference data. The droplet can thus be modeled in terms of energy transfer, which in turn provides the transient mass transfer, droplet temperature, and droplet diameter. Model predictions suggest that non-ideal vapor-liquid equilibrium along with an increase in HOV can alter the droplet composition evolution. Results predict that the presence of ethanol causes enrichment of the higher boiling fractions (T90+) in the aromatic components as well as lengthens the droplet lifetime. A simulation of the evaporation process in a transient environment as experienced within an engine cylinder predicts a decrease in mixing time of the heaviest fractions of the fuel prior to spark initiation, possibly explaining observations linking ethanol to PM.

02 PETROLEUM↗

A coupled ground heat flux–surface energy balance model of evaporation using thermal remote sensing observations

Abstract. One of the major undetermined problems in evaporation (ET) retrieval using thermal infrared remote sensing is the lack of a physically based ground heat flux (G) model and its integration within the surface energy balance (SEB) equation. Here, we present a novel approach based on coupling a thermal inertia (TI)-based mechanistic G model with an analytical surface energy balance model, Surface Temperature Initiated Closure (STIC, version STIC1.2). The coupled model is named STIC-TI. The model is driven by noon–night (13:30 and 01:30 local time) land surface temperature, surface albedo, and a vegetation index from MODIS Aqua in conjunction with a clear-sky net radiation sub-model and ancillary meteorological information. SEB flux estimates from STIC-TI were evaluated with respect to the in situ fluxes from eddy covariance measurements in diverse ecosystems of contrasting aridity in both the Northern Hemisphere and Southern Hemisphere. Sensitivity analysis revealed substantial sensitivity of STIC-TI-derived fluxes due to the land surface temperature uncertainty. An evaluation of noontime G (Gi) estimates showed 12 %–21 % error across six flux tower sites, and a comparison between STIC-TI versus empirical G models also revealed the substantially better performance of the former. While the instantaneous noontime net radiation (RNi) and latent heat flux (LEi) were overestimated (15 % and 25 %), sensible heat flux (Hi) was underestimated (22 %). Overestimation (underestimation) of LEi (Hi) was associated with the overestimation of net available energy (RNi−Gi) and use of unclosed surface energy balance flux measurements in LEi (Hi) validation. The mean percent deviations in Gi and Hi estimates were found to be strongly correlated with satellite day–night view angle difference in parabolic and linear pattern, and a relatively weak correlation was found between day–night view angle difference versus LEi deviation. Findings from this parameter-sparse coupled G–ET model can make a valuable contribution to mapping and monitoring the spatiotemporal variability of ecosystem water stress and evaporation using noon–night thermal infrared observations from future Earth observation satellite missions such as TRISHNA, LSTM, and SBG.

Bhattacharya, Bimal K.↗

Superhydrophobic coated apparatus for liquid purification by evaporative condensation

Disclosed are examples of apparatuses for evaporative purification of a contaminated liquid. In each example, there is a first vessel for storing the contaminated fluid. The first vessel includes a surface coated with a layer of superhydrophobic material and the surface is at least partially in contact with the contaminated liquid. The contaminants do not adhere to the surface as the purified liquid evaporates, thus simplifying maintenance of the apparatus.

42 ENGINEERING↗

A Novel Absorption Cycle for Combined Water Heating, Dehumidification, and Evaporative Cooling

In this study, development of a novel system for combined water heating, dehumidification, and space evaporative cooling is discussed. Ambient water vapor is used as a working fluid in an open system. First, water vapor is absorbed from an air stream into an absorbent solution. The latent heat of absorption is transferred into the process water that cools the absorber. The solution is then regenerated in the desorber, where it is heated by a heating fluid. The water vapor generated in the desorber is condensed and its heat of phase change is transferred to the process water in the condenser. The condensed water can then be used in an evaporative cooling process to cool the dehumidified air exiting the absorber, or it can be drained if primarily dehumidification is desired. Essentially, this open absorption cycle collects space heat and transfers it to process water. This technology is enabled by a membrane-based absorption/desorption process in which the absorbent is constrained by hydrophobic vapor-permeable membranes. Constraining the absorbent film has enabled fabrication of the absorber and desorber in a plate-and-frame configuration. An air stream can flow against the membrane at high speed without entraining the absorbent, which is a challenge in conventional dehumidifiers. Furthermore, the absorption and desorption rates of an absorbent constrained by a membrane are greatly enhanced. Isfahani and Moghaddam (Int. J. Heat Mass Transfer, 2013) demonstrated absorption rates of up to 0.008 kg/m2s in a membrane-based absorber and Isfahani et al. (Int. J. Multiphase Flow, 2013) have reported a desorption rate of 0.01 kg/m2s in a membrane-based desorber. The membrane-based architecture also enables economical small-scale systems, novel cycle configurations, and high efficiencies. The absorber, solution heat exchanger, and desorber are fabricated on a single metal sheet. In addition to the open arrangement and membrane-based architecture, another novel feature of the cycle is recovery of the solution heat energy exiting the desorber by process water (a process-solution heat exchanger ) rather than the absorber exiting solution (the conventional solution heat exchanger ). This approach has enabled heating the process water from an inlet temperature of 15 C to 57 C (conforming to the DOE water heater test standard) and interfacing the process water with absorbent on the opposite side of a single metal sheet encompassing the absorber, process-solution heat exchanger, and desorber. The system under development has a 3.2 kW water heating capacity and a target thermal coefficient of performance (COP) of 1.6.

Absorption Heat Pump↗

A UNIFAC-Based Approach to Gasoline Droplet Evaporation and the Role of Oxygenates on PM Precursor Vaporization

In some studies, a relationship has been observed between increasing ethanol content in gasoline and increased particulate matter (PM) emissions from vehicles equipped with spark ignition engines. The fundamental cause of the PM increase seen for moderate ethanol concentrations is not well understood. As a result, existing PM indices such as PMI may not be indicative of measured PM emissions for oxygenated biofuel blends. Ethanol features a greater heat of vaporization (HOV) than gasoline and also influences vaporization by altering the liquid and vapor composition throughout the vaporization process. A droplet vaporization model was developed to explore ethanol's effect on the evaporation of aromatic compounds known to be PM precursors. The evolving droplet composition is modeled as a distillation process, with non-ideal interactions between oxygenates and hydrocarbons accounted for using UNIFAC group contribution theory. Detailed hydrocarbon analysis was applied to fuel samples, and used as input for the initial droplet composition. The droplet can be modeled in terms of energy transfer, which in turn provides the transient mass transfer, droplet temperature, and droplet diameter. Model predictions suggest that non-ideal vapor-liquid equilibrium along with an increase in HOV can alter the droplet composition evolution. Results predict that the presence of ethanol causes enrichment of the higher boiling fractions (T90+) in the aromatic components as well as lengthens the droplet lifetime. A simulation of the evaporation process in a transient environment as experienced within an engine cylinder predicts a decrease in mixing time of the heaviest fractions of the fuel prior to spark initiation, possibly explaining observations linking ethanol to PM. A correlation between liquid phase PM precursors and measured PM emissions is shown.

33 ADVANCED PROPULSION SYSTEMS↗