SEARCH · Engineering Papers
Results for “ENG”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Engineering Corynebacterium glutamicum to produce the biogasoline isopentenol from plant biomass hydrolysates
Abstract Background Many microbes used for the rapid discovery and development of metabolic pathways have sensitivities to final products and process reagents. Isopentenol (3-methyl-3-buten-1-ol), a biogasoline candidate, has an established heterologous gene pathway but is toxic to several microbial hosts. Reagents used in the pretreatment of plant biomass, such as ionic liquids, also inhibit growth of many host strains. We explored the use of Corynebacterium glutamicum as an alternative host to address these constraints. Results We found C. glutamicum ATCC 13032 to be tolerant to both the final product, isopentenol, as well to three classes of ionic liquids. A heterologous mevalonate-based isopentenol pathway was engineered in C. glutamicum . Targeted proteomics for the heterologous pathway proteins indicated that the 3-hydroxy-3-methylglutaryl-coenzyme A reductase protein, HmgR, is a potential rate-limiting enzyme in this synthetic pathway. Isopentenol titers were improved from undetectable to 1.25 g/L by combining three approaches: media optimization; substitution of an NADH-dependent HmgR homolog from Silicibacter pomeroyi ; and development of a C. glutamicum ∆poxB ∆ldhA host chassis. Conclusions We describe the successful expression of a heterologous mevalonate-based pathway in the Gram-positive industrial microorganism, C. glutamicum, for the production of the biogasoline candidate, isopentenol. We identified critical genetic factors to harness the isopentenol pathway in C. glutamicum . Further media and cultivation optimization enabled isopentenol production from sorghum biomass hydrolysates.
The role of interstitial gas in determining the impact response of granular beds
Abstract not provided
A refined monoclinic structure for a variety of ;hydrohematite;
Abstract not provided
A multi-faceted experimental study on the dynamic behavior of MgSiO[subscript 3] glass in the Earth?
Explore the source record for details and available documents.
International Linear Collider-A Technical Progress Report
The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.
Papers from the SLAC DOE Science Undergraduate Laboratory Internship Program (SULI 2011)
SPIRES, an aging high-energy physics publication data base, is in the process of being replaced by INSPIRE. In order to ease the transition from SPIRES to INSPIRE it is important to understand user behavior and the drivers for adoption. The goal of this project was to address some questions in regards to the presumed two-thirds of the users still using SPIRES. These questions are answered through analysis of the log files from both websites. A series of scripts were developed to collect and interpret the data contained in the log files. The common search patterns and usage comparisons are made between INSPIRE and SPIRES, and a method for detecting user frustration is presented. The analysis reveals a more even split than originally thought as well as the expected trend of user transition to INSPIRE.
Review of Existing Hydroelectric Turbine-Governor Simulation Models
This report is the first in a series of documents to be issued in the course of a DOE project titled “Modeling and Analysis of Value of Advanced Pumped Storage Hydropower in the U.S.” We are all intimately familiar with small energy storage devices; we use batteries of various types in our cell phones and other electronic devices as well as the more traditional battery powered devices such as flashlights and radios. However, storing large amounts of energy, on the scale that would be useful for a utility-scale power system, has been a much more challenging task. While several new technologies are being developed, pumped storage hydro is the most widely employed method available for storing large amounts of energy to supply electricity. The basic concept of pumped storage is quite simple: electricity is used to pump water up to an elevated reservoir, where the energy can be stored as potential energy until it is needed; then electricity is generated by letting the water flow back down thorough a turbine/generator. Of course, since there is a loss of energy due to the pumping and generating cycle (as low as 10% for some new plants), there must be an economic incentive for the storage, such as a variation in electricity prices between times of pumping and generating.
Cladding Attachment Over Thick Exterior Insulating Sheathing
The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?
CLAS12 Silicon Vertex Tracker Module Test
This is a technical scope of work (TSW) between the Fermi National Accelerator Laboratory and the experimenters of CLAS12 collaboration who have committed to participate in beam tests to be carried out during the 2013-2014 Fermilab Test Beam Facility program.
Engineering Specifications Document for SXRSS Beam Overlap Diagnostics
Abstract Not Provided
LCLS Physics Specifications for the SXRSS Beam Overlap Diagnostics
The SXRSS Beam Overlap Diagnostics PRD provides the physics requirements for the overlap diagnostics as part of the SXRSS project for the LCLS undulator. This document covers the overlap diagnostics to be installed after girders 9 and 12 of the LCLS undulators.
S-Band RF Load Upgrade Program for SLAC Linac [Slides]
Abstract not provided.
Overview of High Power Vacuum Dry RF Load Designs
A specific feature of RF linacs based on the pulsed traveling wave (TW) mode of operation is that only a portion of the RF energy is used for the beam acceleration. The residual RF energy has to be terminated into an RF load. Higher accelerating gradients require higher RF sources and RF loads, which can stably terminate the residual RF power. RF feeders (from the RF source though the accelerating section to the load) are vacuumed to transmit multi-megawatt high power RF. This overview will outline vacuumed RF loads only. A common method to terminate multi-MW RF power is to use circulated water (or other liquid) as an absorbing medium. A solid dielectric interface (a high quality ceramic) is required to separate vacuum and liquid RF absorber mediums. Using such RF load approaches in TW linacs is troubling because there is a fragile ceramic window barrier and a failure could become catastrophic for linac vacuum and RF systems. Traditional loads comprising of a ceramic disk have limited peak and average power handling capability and are therefore not suitable for high gradient TW linacs. This overview will focus on ''vacuum dry'' or ''all-metal'' loads that do not employ any dielectric interface between vacuum and absorber. The first prototype is an original design of RF loads for the Stanford Two-Mile Accelerator.
2011 Biomass Program Platform Peer Review: Sustainability - An Independent Evaluation of Platform Activities for FY 2010 and FY 2011
This document summarizes the recommendations and evaluations provided by an independent external panel of experts at the 2011 U.S. Department of Energy Biomass Program’s Sustainability Platform Review meeting.
Measure Guideline: Wood Window Repair, Rehabilitation, and Replacement
This measure guideline provides information and guidance on rehabilitating, retrofitting, and replacing existing window assemblies in residential construction. The intent is to provide information regarding means and methods to improve the energy and comfort performance of existing wood window assemblies in a way that takes into consideration component durability, in-service operation, and long term performance of the strategies.