Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Downlink”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Ka-band (32 GHz) spacecraft development plan

A road map for the development of a protoflight 32 GHz spacecraft solid state transmitter is given. The major milestones include the development of device and component technology required for use in the spaceborne experimental and operational transmitter systems. Two experimental spacecraft transmitter systems are envisioned: first, a low power beacon, to determine the performance of a 32 GHz downlink communications system; and second, an array feed, to further verify the results of the first experiment and service as a test bed for technology required for an operational system. The first experiment was proposed to NASA Headquarters for flight aboard the Mars Observer spacecraft with spacecraft integration in early 1989. The second is to be available for integration aboard a spacecraft such as the Comet Rendezvous Asteroid Flyby (CRAF) mission in the 1990 time frame. These experimental systems are to lead to the development of a protoflight transmitter for subsequent spacecraft integration in 1992, the time frame of the Cassini mission to Saturn.

Riley, A. L.↗

STS-61C, Columbia flight

The performance of the Marshall Amateur Radio Club Experiment (MARCE) is reviewed. The responses, from the World Wide Amateur Radio Ground Stations, who received the Columbia to Earth direct radio downlinks, are discussed. Likewise, the MARCE radio relay link from Columbia through the AMSAT OSCAR AO-10 satellite to Earth is reviewed.

Stluka, Edward F.↗

Spacecraft mass trade-offs versus radio-frequency power and antenna size at 8 GHz and 32 GHz

The purpose of this analysis is to help determine the relative merits of 32 GHz over 8 GHz for future deep space communications. This analysis is only a piece of the overall analysis and only considers the downlink communication mass, power, and size comparisons for 8 and 32 GHz. Both parabolic antennas and flat-plate arrays are considered. The Mars Sample Return mission is considered in some detail as an example of the tradeoffs involved; for this mission the mass, power, and size show a definite advantage of roughly 2:1 in using the 32 GHz over 8 GHz.

Gilchriest, C. E.↗

A 30/20 GHz FSS feasibility study

The near term feasibility of direct-to-subscriber services were determined using the 30/20 GHz Fixed Satellite Service (FSS) frequency bands. Those technologies which need to be further developed before such a system can be implemented, were identified. To determine this feasibility, dozens of potential applications were examined for their near-term viability, and the subscriber base of three promising applications were estimated. The system requirements, terminal design, and satellite architecture were all investigated to determine whether a 30/20 GHz FSS system is technically and economically feasible by mid-1990s. It was concluded that such a system is feasible, although maturation of some technologies is needed. This system would likely consist of one or two multibeam satellites serving hub/spoke networks of simple user terminals and more complex, mutli-channel terminals of the service providers. Rain compensation would be accomplished non-adaptively through the use of coding, nonuniform satellite TWT power that is a function of a beam's anticipated downlink fading, and signal regeneration of traffic to the wettest climate regions. It was estimated that a potential market of almost two million users could exist in in the mid-1990s time frame for home banking and financial services via Ka-band satellites.

Source record↗

Dust distribution of Comet Halley from the Giotto radio science experiment

Measurements from the Giotto radio science experiment representing the Doppler frequency shift and the intensity level of the X-band downlink signal of the Giotto spacecraft during its encounter with comet Halley are shown. Continuous data reception was maintained throughout the encounter. The Doppler shift measured within a time interval of 100 sec is due to drag effects in the cometary atmosphere causing a deceleration of the spacecraft. The total change of velocity of Giotto is 23.2 cm/sec resulting in a best estimate of 0.32 g for the total cometary mass impacting Giotto during the Halley flyby. A dust jet structure for the inner coma of comet Halley is derived. Several sharply confined dust jets are distinguishable; for the most prominent one, characteristic properties are deduced. Features of this jet structure are shown to correlate with measurements from on-board Giotto experiments and with Earth-based observations.

Edenhofer, P.↗

Calibrated Ancillary System (CAS) user's guide, volume 1

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of the CAS. Volume 1 includes a general overview of the CAS relationships with other equipment, physical design, and hardware and software subsystems. In addition, a description of the user levels and tasks, an introduction to CAS operation, and an outline of general operating procedures are included.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 2

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 2 describes the central status and control (CSAC) procedures, supervisor procedures, and logging procedures.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 3

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of the CAS. Volume 3 describes logging and delogging procedures, real-time procedures, and error messages.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 4

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of the CAS. Volume 4 presents the GSFC user mission planning procedures covering the mission planning main menu, bulletin board system, ancillary products menu, utility menu procedures, and ancillary support files procedures.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 5

The Calibrated Ancillary System (CAS) provides real-time parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 5 describes the testing user mission planning procedures including the bulletin board system and ancillary products procedures. Instructions for viewing the SDT/TDT (shuttle data tape/telemetry descriptor tape) data base and the file management menu are also given.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 6

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 6 describes ancillary products procedures, enhancement menu and processing task procedures for SDT/TDT (shuttle data tape/telemetry descriptor tape), database errors and network data driver (NDD) product menu procedures, and utility menu procedures.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 7

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 7 describes the data flow engineer (DFE) user mission planning procedures which include instructions for processing the SDT/TDT (shuttle data tape/telemetry descriptor tape).

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 8

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 8 describes procedures for invoking checkout software, file maintenance procedures, system manager procedures.

Source record↗

Calibrated Ancillary System (CAS) user's guide, volume 9

The Calibrated Ancillary System (CAS) provides real-time calibrated parameters from the orbiter downlink (ancillary data) to the Goddard Space Flight Center (GSFC). This user's guide contains the introduction to the equipment, operation, general procedures, and specific procedures of CAS. Volume 9 contains the menu-independent CAS commands. Examples of each command and command parameters are presented. A listing of acronyms and applicable documentation is also provided.

Source record↗

406-MHz geostationary SAR experiment

The ability of a 406-MHz satellite to detect and locate aeronautical, maritime, and terrestrial distress incidents is investigated. The geostationary satellite, uplink and downlink budgets, and processors utilized in the experiment are described. The experiment involves: (1) benchmark testing, (2) verification of spacecraft repeater performance, (3) system evaluation, and (4) environmental testing. The Canadian processor data reveal that the processor threshold is 28 dB Hz, the degradation at 27 dB Hz is significant, the median distress message throughput time is 6 minutes, and the microcomputer can handle 10 distress incidents per hour.

Dumont, P.↗

Preliminary results of the Giotto radio science experiment

Doppler and ranging measurements using the radio signal of the Giotto spacecraft were taken before, during, and after the encounter with Comet Halley on Mar. 13, 14, 1986. The spacecraft velocity was found to decrease by a total of 23.3 cm/s due to impacting gas and (primarily) dust in the cometary atmosphere. A preliminary dust production rate of 1000 kg/s is found to be consistent with this deceleration. Power spectra of the carrier phase fluctuations reveal an increase in level and a flattening of the spectrum just prior to encounter, presumably associated with the enhanced dust impact rate. Finally, simulated Doppler time profiles are computed using the radial dependence of plasma density observed by the Giotto in situ investigations. It is shown that the cometary electron content profile would have been clearly seen if a dual-frequency downlink radio configuration had been available at encounter.

Edenhofer, P.↗

Switches, lasers and electronically-hopped beam antennas in space - NASA's advanced communications technology satellite

The proposed design and operation of the Advanced Communications Technology Satellite (ACTS) are described. The ACTS is a three-axis stabilized spacecraft with an in-orbit weight of 2300 lbs and a beginning-of-life power of 1770 W; it is composed of a 20 GHz 2.2 m downlink antenna, a 30 GHz 3.3 m uplink antenna, a 1 m steerable antenna, and a laser package. The space segment communications payload uses high and low burst rate modes; the operations of these modes are discussed. The components of the laser intersatellite link instrument package are examined. Consideration is given to the ACTS's antennas, RF matrix switch system, and the base band processor. Diagrams of the ACTs systems are presented.

Lovell, Robert R.↗

A 20 GHz, high efficiency dual mode TWT for the ACTS program

The development of a 50 W/10 W dual mode K-band downlink TWT is examined, and its performance is evaluated. The designs of the electron gun, RF circuit, and collector for the TWT, which is enclosed in a capsule, are described. It is observed that the high power mode (HPM) power output is at 50 GHz and the low power mode (LPM) output is at 12 GHz; the saturated gain is 52.5 dB for HPM and 3 dB for LPM; the AM-PM is 4.2 dB; the HPM dc power output is 104 W; and the LPM dc output is 42 W; and the efficiency is 45 percent for the HPM and 28.6 percent for the LPM.

Muennemann, Frank↗