Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Doppler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

CMB aberration and Doppler effects as a source of hemispherical asymmetries

Our peculiar motion with respect to the CMB rest frame represents a preferred direction in the observed CMB sky since it induces an apparent deflection of the observed CMB photons (aberration) and a shift in their frequency (Doppler). Both effects distort the multipoles a{sub ℓm}'s at all ℓ's. Such effects are real as it has been recently measured for the first time by Planck according to what was forecast in some recent papers. However, the common lore when estimating a power spectrum from CMB is to consider that Doppler affects only the ℓ = 1 multipole, neglecting any other corrections. In this work we use simulations of the CMB sky in a boosted frame with a peculiar velocity β≡v/c = 1.23 × 10{sup −3} in order to assess the impact of such effect on power spectrum estimations in different regions of the sky. We show that the boost induces a north-south asymmetry in the power spectrum which is highly significant and non-negligible, of about (0.58±0.10)% for half-sky cuts when going up to ℓ ≈ 2500. We suggest that these effects are relevant and may account for some of the north-south asymmetries seen in the Planck data, being especially important at small scales. Finally we analyze the particular case of the ACT experiment, which observed only a small fraction of the sky and show that it suffers a bias of about 1% on the power spectrum and of similar size on some cosmological parameters: for example the position of the peaks shifts by 0.5% and the overall amplitude of the spectrum is about 0.4% lower than a full-sky case.

79 ASTRONOMY AND ASTROPHYSICS↗

Sub-Doppler Cooling of a Trapped Ion in a Phase-Stable Polarization Gradient

Trapped ions provide a highly controlled platform for quantum sensors, clocks, simulators, and computers, all of which depend on cooling ions close to their motional ground state. Existing methods like Doppler, resolved sideband, and dark resonance cooling balance trade-offs between the final temperature and cooling rate. A traveling polarization gradient has been shown to cool multiple modes quickly and in parallel, but utilizing a stable polarization gradient can achieve lower ion energies, while also allowing tailorable light-matter interactions in the sub-wavelength regime. In this Letter, we demonstrate cooling of a trapped ion below the Doppler limit using a phase-stable polarization gradient created using trap-integrated photonic devices. At an axial frequency of 2⁢𝜋×1.45 MHz we achieve ⟨𝑛⟩=1.56±0.07 in 150 μ⁢s and cooling rates of ∼0.3 quanta/μ⁢s. Here, we examine ion dynamics under different polarization gradient phases, detunings, and intensities, showing reasonable agreement between experimental results and a multilevel model. Cooling is fast and power efficient, with lower average motional Fock state occupation when compared to simulated operation under the corresponding running wave configuration. Our results demonstrate a well-controlled test bed for studying the dynamics of multilevel atomic systems in a phase-stable polarization gradient.

Atom & ion cooling↗

Micromotion-synchronized pulsed Doppler cooling of trapped ions

Here we propose and demonstrate a new method for Doppler cooling trapped-ion crystals where the distribution of micromotion amplitudes may be large and uneven. The technique uses pulses of Doppler cooling light synchronized with the trap RF that selectively target ions when their velocity is near a node, leading to more uniform cooling across a crystal by a single tone of cooling light. We lay out a theoretical framework that describes where this technique is practical, and provide a simple experimental demonstration.

79 ASTRONOMY AND ASTROPHYSICS↗

Positronium cooling in porous silica measured via Doppler spectroscopy

We have measured the kinetic energy of positronium (Ps) atoms emitted into a vacuum from a porous silica film subsequent to positron bombardment, via the Doppler spread of the linewidth of the Ps 1{sup 3}S-2{sup 3}P transition. We find that the deeper in the target film that positrons are implanted the colder is the emitted Ps, an effect we attribute to cooling via collisions in the pores as the atoms diffuse back to the film surface. We observed a lower limit to the mean Ps kinetic energy associated with motion in the direction of the laser, E{sub x}=42+-3 meV, that is consistent with conversion of the confinement energy of Ps in the 2.7-nm-diameter pores to kinetic energy in vacuum. An implication is that a porous sample would need to be composed of pores greater than around 10 nm in diameter in order to produce thermal Ps in vacuum with temperatures of less than 100 K. By performing Doppler spectroscopy on intense pulses of Ps we have experimentally demonstrated the production of many excited-state Ps atoms simultaneously, which could have numerous applications, including laser cooling and fundamental spectroscopic studies of Ps and the production of antihydrogen.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electromagnetically induced transparency without a Doppler background in a multilevel ladder-type cesium atomic system

We present an investigation of electromagnetically induced transparency (EIT) without Doppler background due to a locked probe laser. The EIT is theoretically studied based on a multilevel ladder-type cesium atomic system 6S{sub 1/2}-6P{sub 3/2}-8S{sub 1/2} in a room-temperature vapor cell. The experimental results agree with the theoretical calculations. Compared with the traditional EIT spectra with a Doppler profile limiting the spectral resolution for keeping the coupling laser locked and scanning the probe laser, these EIT spectra with the probe laser locked and the coupling laser scanned have a flat background, which seem be of great benefit for applications such as the measurement of hyperfine intervals between excited states, the study of highly excited Rydberg states, laser-frequency stabilization, etc.

74 ATOMIC AND MOLECULAR PHYSICS↗

Side feeding patterns and nuclear lifetime determinations by the Doppler shift attenuation method in ({alpha},n{gamma}) reactions

{gamma} rays were measured at several angles in both singles and coincidence mode in the {sup 119}Sn({alpha},n{gamma}){sup 122}Te reaction at 15 MeV on a thick target. Lifetimes of excited states in {sup 122}Te were determined from a Monte Carlo Doppler shift attenuation method (DSAM) analysis of the Doppler broadened lines shapes of {gamma} rays de-exciting the levels. A comparison of several deduced lifetimes with recent results obtained with the (n,n{sup '}) reaction allowed us to validate the choice of a parameter used to calculate the contribution of the side feeding times. The ingredients of the DSAM line-shape analysis (stopping power, description of instrumental line shapes, and side feeding evaluation) are presented in some detail. It is concluded that with proper treatment of side feeding, a DSAM line-shape analysis of peaks in singles or coincidence spectra obtained following the ({alpha},n{gamma}) reaction is able to provide rather accurate values for the lifetimes of levels with low and medium spins.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Doppler broadening in Mg 20 ( β p γ ) Ne 19 decay

The $^{15}$$\textbf{O}$$\Big({α,γ}\Big)$$^{19}$$\textbf{Ne}$ bottleneck reaction in Type I x-ray bursts is the most important thermonuclear reaction rate to constrain experimentally, to improve the accuracy of burst light-curve simulations. A proposed technique to determine the thermonuclear rate of this reaction employs the $^{20}$$\textbf{Mg}$$\Big({βpα}\Big)$$^{15}$$\textbf{O}$ decay sequence. The key $^{15}$$\textbf{O}$$\Big({α,γ}\Big)$$^{19}$$\textbf{Ne}$ resonance at an excitation of 4.03 MeV is now known to be fed in $^{20}$$\textbf{Mg}$$\Big({βpγ}\Big)$$^{19}$$\textbf{Ne}$ however, the energies of the protons feeding the 4.03 MeV state are unknown. Knowledge of the proton energies will facilitate future $^{20}$$\textbf{Mg}$$\Big({βpα}\Big)$$^{15}$$\textbf{O}$ measurements. To determine the energy of the proton transition feeding the 4.03 MeV state in $^{19}$$\textbf{Ne}$. A fast beam of $^{20}$$\textbf{Mg}$ was implanted into a plastic scintillator, which was used to detect $β$ particles. 16 high purity germanium detectors were used to detect $γ$ rays emitted following $βp$ decay. A Monte Carlo method was used to simulate the Doppler broadening of $^{19}$$\textbf{Ne}γ$-ray lines and compare to the experimental data. The center of mass energy between the proton and $^{19}$$\textbf{Ne}$, feeding the 4.03 MeV state, is measured to be $1.21^{+0.25}_{-0.22}$ $\textbf{MeV}$, corresponding to a $^{20}$$\textbf{Na}$ excitation energy of $7.44^{+0.25}_{-0.22}$$\textbf{MeV}$. Absolute feeding intensities and $γ$-decay branching ratios of $^{19}$$\textbf{Ne}$ states were determined including the 1615 keV state, which has not been observed before in this decay. A new $γ$ decay branch from the 1536 keV state in $^{19}$$\textbf{Ne}$ to the ground state is reported. The lifetime of the 1507 keV state in $^{19}$$\textbf{Ne}$ is measured to be $4.3^{+1.3}_{-1.1}$ ps resolving discrepancies in the literature. Conflicting $^{20}$$\textbf{Mg}$$\Big({βp}\Big)$ decay schemes in published literature are clarified.The utility of this Doppler broadening technique to provide information on $β$-delayed nucleon emission and excited-state lifetimes has been further demonstrated. In particular, knowledge of the proton energies feeding the 4.03 MeV $^{19}$$\textbf{Ne}$ state in $^{20}$$\textbf{Mg}$ $β$ decay will facilitate future measurements of the $α$-particle branching ratio.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Doppler Lidar Measurements of Wind Variability and LLJ Properties in Central Oklahoma during the August 2017 Land–Atmosphere Feedback Experiment

Abstract Low-level jets (LLJs) are an important nocturnal source of wind energy in the U.S. Great Plains. An August 2017 lidar-based field-measurement campaign [the Land–Atmosphere Feedback Experiment (LAFE)] studied LLJs over the central SGP site in Oklahoma and found nearly equal occurrences of the usual southerly jets and postfrontal northeasterly jets—typically rare during this season—for an opportunity to compare the two types of LLJs during this month. Southerly winds were stronger than the northeasterlies by more than 4 m s −1 on average, reflecting a significantly higher frequency of winds stronger than 12 m s −1 . The analysis of this dataset has been expanded to other SGP Doppler-lidar sites to quantify the variability of winds and LLJ properties between sites of different land use. Geographic variations of winds over the study area were noted: on southerly wind nights, the winds blew stronger at the highest, westernmost sites by 2 m s −1 , whereas on the northeasterly flow nights, the easternmost sites had the strongest wind speeds. Lidar measurements at 5 sites during August 2017, contrasted to the 2016–21 summertime data, revealed unusual wind and LLJ conditions. Temporal hodographs using hourly averaged winds at multiple heights revealed unorganized behavior in the turbulent stable boundary layer (SBL) below the jet nose. Above the nose, some nights showed veering qualitatively similar to inertial oscillation (IO) behavior, but at amplitudes much smaller than expected for an IO, whereas other nights showed little veering. Vertical hodographs had a linear shape in the SBL, indicating little directional shear there, and veering above, resulting in a hook-shaped hodograph with height. Significance Statement Doppler-lidar measurements at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) were used to quantify the variability of winds and low-level jet (LLJ) properties between five sites of different land use and wind regimes across this area. Knowledge of wind and LLJ structure and dynamics is important for many applications, and strong southerly LLJ winds at night are an important resource for wind energy. The analysis of multiyear (2016–21) summertime LLJ parameters provided insight into the LLJ climatology in this part of the Great Plains.

Meteorology & Atmospheric Sciences↗

Correction of Dual-PRF Doppler Velocity Outliers in the Presence of Aliasing

Abstract In Doppler weather radars, the presence of unfolding errors or outliers is a well-known quality issue for radial velocity fields estimated using the dual–pulse repetition frequency (PRF) technique. Postprocessing methods have been developed to correct dual-PRF outliers, but these need prior application of a dealiasing algorithm for an adequate correction. This paper presents an alternative procedure based on circular statistics that corrects dual-PRF errors in the presence of extended Nyquist aliasing. The correction potential of the proposed method is quantitatively tested by means of velocity field simulations and is exemplified in the application to real cases, including severe storm events. The comparison with two other existing correction methods indicates an improved performance in the correction of clustered outliers. The technique proposed is well suited for real-time applications requiring high-quality Doppler radar velocity fields, such as wind shear and mesocyclone detection algorithms, or assimilation in numerical weather prediction models.

58 GEOSCIENCES↗

Characteristic Raindrop Size Retrievals from Measurements of Differences in Vertical Doppler Velocities at Ka- and W-Band Radar Frequencies

A Ka-band (~35 GHz) and W-band (~94 GHz) radar method to catch profiles of characteristic raindrop sizes, such as mean mass-weighted drop diameters D m , from measurements of the difference in the mean vertical Doppler velocities (DDV) is analyzed. This retrieval approach is insensitive to radar calibration errors, vertical air motions, and attenuation effects. The D m –DDV relations are derived using long-term measurements of drop size distributions (DSDs) from different observational sites and do not assume a functional DSD shape. Unambiguous retrievals using this approach are shown to be available in the D m range of approximately 0.5–2 mm, with average uncertainties of around 21%. Potential retrieval ambiguities occurring when larger drop populations exist can be avoided by using a Ka-band vertical Doppler velocity threshold. The performance of the retrievals is illustrated using a long predominantly stratiform rain event observed at the Atmospheric Radiation Measurement (ARM) Southern Great Plains site. An intercomparison of DDV-based estimates of characteristic raindrop sizes with independent estimates available from ground-based disdrometer measurements reveal good agreement, with a correlation coefficient of 0.88, and mean differences between radar and disdrometer-based D m of approximately 14% for the entire range of unambiguous retrievals. The Ka–W-band DDV method to retrieve mean mass-weighted drop sizes is applicable to measurements from new dual-wavelength ARM cloud radars that are being deployed at a variety of observational facilities. An illustration for the retrievals at the Oliktok Point ARM facility is also given in this work.

54 ENVIRONMENTAL SCIENCES↗

High-Resolution, Rapid-Scan Dual-Doppler Retrievals of Vertical Velocity in a Simulated Supercell

Observation system simulation experiments are used to evaluate different dual-Doppler analysis (DDA) methods for retrieving vertical velocity w at grid spacings on the order of 100 m within a simulated tornadic supercell. Variational approaches with and without a vertical vorticity equation constraint are tested, along with a typical (traditional) method involving vertical integration of the mass conservation equation. The analyses employ emulated radar data from dual-Doppler placements 15, 30, and 45 km east of the mesocyclone, with volume scan intervals ranging from 10 to 150 s. The effect of near-surface data loss is examined by denying observations below 1 km in some of the analyses. At the longer radar ranges and when no data denial is imposed, the “traditional” method produces results similar to those of the variational method and is much less expensive to implement. However, at close range and/or with data denial, the variational method is much more accurate, confirming results from previous studies. The vorticity constraint shows the potential to improve the variational analysis substantially, reducing errors in the w retrieval by up to 30% for rapid-scan observations (≤30 s) at close range when the local vorticity tendency is estimated using spatially variable advection correction. However, the vorticity constraint also degrades the analysis for longer scan intervals, and the impact diminishes with increased range. Furthermore, analyses using 30-s data also frequently outperform analyses using 10-s data, suggesting a limit to the benefit of increasing the radar scan rate for variational DDA employing the vorticity constraint.

54 ENVIRONMENTAL SCIENCES↗

Separating Cloud and Drizzle Signals in Radar Doppler Spectra Using a Parametric Time Domain Method

The ability to separate cloud and drizzle returns in active remote sensing observations is important for understanding the microphysics of clouds and precipitation. Yet, robust separations remain challenging in radar remote sensing. Prior methods for cloud and drizzle separation for radar observations use the properties of the Doppler spectra such as skewness. However, these methods have challenges when the drizzle becomes dominant in the observation volume. This paper presents a parametric time domain method (PTDM) that separates cloud and drizzle using the Doppler spectra measurements without assuming any prior properties of cloud and drizzle. The advantage of PTDM is that it can estimate the signal properties in the time domain and can obtain the cloud and drizzle estimates simultaneously. Based on our radar signal simulations, the uncertainty in estimated power and velocity from PTDM are within 2 dB and 0.02 m s -1 , respectively. We have also evaluated the PTDM algorithm using observations from the Atmospheric Radiation Measurement (ARM) Program W-band cloud radar in the Clouds, Aerosols, and Precipitation in the Marine Boundary Layer (CAP-MBL) campaign at the Azores in 2009–10. Two cases corresponding to light and moderate drizzling conditions are considered for the study. The statistics of the estimates obtained show that the PTDM method performs well in separating the cloud and drizzle returns. Finally, the estimated cloud and drizzle reflectivity from PTDM were used to retrieve their corresponding microphysical properties, showing that the retrieved liquid water path agrees to 25 g m -2 with the benchmark microwave method.

Engineering↗

Multiple-platform and multiple-Doppler radar observations of a supercell thunderstorm in South America during RELAMPAGO

On 10 November 2018, during the RELAMPAGO field campaign in Argentina, South America, a thunderstorm with supercell characteristics was observed by an array of mobile observing instruments, including three Doppler on Wheels (DOW) radars. This is believed to be the first such storm ever sampled by multiple Doppler radars in South America, and one of perhaps two such sets of observations in the Southern Hemisphere. The observational strategies employed within the Córdoba Province on 10 November are described, as also is the evolution of the initial deep convective clouds through their organization into a supercell. In contrast to the archetypal supercell, the updraft rotation in this storm was rather short lived (~20 min), as also was the occurrence of damaging hail, causing us to question whether this indeed was indeed a supercell. However, additional data collected within the Córdoba Province provide us with evidence of other storms with this behavior, which appears to be attributable in part to effects of the local terrain. Thus, the structure and evolution of this storm documented during RELAMPAGO may be typical in this region.

Trapp, Robert↗

Measurements and Model Improvement: Insight into NWP Model Error Using Doppler Lidar and Other WFIP2 Measurement Systems

Abstract Doppler-lidar wind-profile measurements at three sites were used to evaluate NWP model errors from two versions of NOAA’s 3-km-grid HRRR model, to see whether updates in the latest version 4 reduced errors when compared against the original version 1. Nested (750-m grid) versions of each were also tested to see how grid spacing affected forecast skill. The measurements were part of the field phase of the Second Wind Forecasting Improvement Project (WFIP2), an 18-month deployment into central Oregon–Washington, a major wind-energy-producing region. This study focuses on errors in simulating marine intrusions, a summertime, 600–800-m-deep, regional sea-breeze flow found to generate large errors. HRRR errors proved to be complex and site dependent. The most prominent error resulted from a premature drop in modeled marine-intrusion wind speeds after local midnight, when lidar-measured winds of greater than 8 m s −1 persisted through the next morning. These large negative errors were offset at low levels by positive errors due to excessive mixing, complicating the interpretation of model “improvement,” such that the updates to the full-scale versions produced mixed results, sometimes enhancing but sometimes degrading model skill. Nesting consistently improved model performance, with version 1’s nest producing the smallest errors overall. HRRR’s ability to represent the stages of sea-breeze forcing was evaluated using radiation budget, surface-energy balance, and near-surface temperature measurements available during WFIP2. The significant site-to-site differences in model error and the complex nature of these errors mean that field-measurement campaigns having dense arrays of profiling sensors are necessary to properly diagnose and characterize model errors, as part of a systematic approach to NWP model improvement. Significance Statement Dramatic increases in NWP model skill will be required over the coming decades. This paper describes the role of major deployments of accurate profiling sensors in achieving that goal and presents an example from the Second Wind Forecast Improvement Program (WFIP2). Wind-profile data from scanning Doppler lidars were used to evaluate two versions of HRRR, the original and an updated version, and nested versions of each. This study focuses on the ability of updated HRRR versions to improve upon predicting a regional sea-breeze flow, which was found to generate large errors by the original HRRR. Updates to the full-scale HRRR versions produced mixed results, but the finer-mesh versions consistently reduced model errors.

Meteorology & Atmospheric Sciences↗

Marine Corps Base Camp Lejeune New River Estuary - Acoustic Doppler Current Profiler (ADCP) Results

Critical military training and testing on lands along the nation’s coastal and estuarine shorelines are increasingly placed at risk because of development pressures in surrounding areas, impairments due to other anthropogenic disturbances, and increasing requirements for compliance with environmental regulations. The U.S. Department of Defense (DoD) intends to enhance and sustain its training and testing assets and to optimize its stewardship of natural resources through the development and application of an ecosystem-based management approach on DoD installations. To accomplish this goal, particularly for installations in estuarine/coastal environments, the Strategic Environmental Research and Development Program (SERDP) launched the Defense Coastal/Estuarine Research Program (DCERP) as a minimum 10-year effort at Marine Corps Base Camp Lejeune (MCBCL) in North Carolina. The results of the first six years of the program (DCERP1) are presented here.The overarching objectives of DCERP are to: (1) understand the effects of military training activities, infrastructure development, and other coastal military installations; (2) develop models, tools, and indicators to evaluate ecosystem health; and (3) recommend adaptive management strategies to sustain ecosystem natural resources within the context of an active military installation.This data package contains a zipfile of results from Acoustic Doppler Current Profilers (ADCPs) used to collect current profiles throughout the New River Estuary in 2009: Teledyne RD Instrument’s acoustic Doppler current profilers (ADCPs) were deployed throughout the NRE to understand current flows and tidal extent. (Current velocity and water level data collected by the ADCPs were also used to validate a hydrodynamic model of the NRE.) Two ADCPS were deployed by Marker 12 and the Highway 172 bridge from late-February to early-July 2009. These ADCPs were attached to steel frames that rested on the sediment surface with the ADCP looking upward to make full water column profiles of water velocity minus a 1-m blanking between the instrument and sediment surface. Also attached to the steel frames were conductivity-temperature-depth (CTD) sensors, which provided concomitant salinity, temperature, and water depth data with the ADCP current measurements. Two ADCPS were also deployed in close proximity to the AVPs in Stones and Morgan Bays from mid-July to mid-December 2009. These ADCPs were deployed flush to the estuary floor to maximize the full vertical sampling capability at these shallow stations and the AVPs collected coincidental temperature, salinity, and depth measurements. For all deployments, the ADCPs were programmed in fast ping-rate mode 12 using 20 pings per ensemble and collected profiles in 10-cm bins every 6 minutes yielding a standard deviation in velocity measurements of 1.27 cm s-1. Current velocity and water level data were analyzed to understand the tidal influence on circulation within the NRE. Harmonic analyses were performed to extract the dominant tidal constituents from the velocity and depth records using T-tide run in MATLAB (Pawlowicz et al., 2002). These measurements of tidal amplitude and phase were then used to validate the high-resolution Advanced Circulation (ADCIRC) Model of the NRE region.

54 ENVIRONMENTAL SCIENCES↗

Implementation of Doppler Broadening of the Neutron Elastic Scattering Cross Section in MCATK (U)

The ability to Doppler broaden the neutron elastic scattering cross section as a function of cell material temperature has been added to the Monte Carlo Application Toolkit (MCATK). Two different computational methods have been tested for speed and correctness. The implementation has been tested against Doppler broadened nuclear data generated using the NJOY nuclear data processing code. The implementation in MCATK compares well with the tabulated data from NJOY, typically within 0.25%.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Doppler Lidar Vertical Velocity Statistics Value-Added Product

Accurate height-resolved measurements of higher-order statistical moments of vertical velocity fluctuations are crucial for improved understanding of turbulent mixing and diffusion, convective initiation, and cloud life cycles. The Atmospheric Radiation Measurement (ARM) Climate Research Facility operates coherent Doppler lidar systems at several sites around the globe. These instruments provide measurements of clear-air vertical velocity profiles in the lower troposphere with a nominal temporal resolution of 1 sec and height resolution of 30 m. The purpose of the Doppler lidar vertical velocity statistics (DLWSTATS) value-added product (VAP) is to produce height- and time-resolved estimates of vertical velocity variance, skewness, and kurtosis from these raw measurements. The VAP also produces estimates of cloud properties, including cloud-base height (CBH), cloud frequency, cloud-base vertical velocity, and cloud-base updraft fraction.

47 OTHER INSTRUMENTATION↗

Measuring Turbulence from Moored Acoustic Doppler Velocimeters. A Manual to Quantifying Inflow at Tidal Energy Sites

This work details a methodology for measuring hub height inflow turbulence using moored acoustic Doppler velocimiters (ADVs). This approach is motivated by the shortcomings of alternatives. For example, remote velocity measurements (i.e., from acoustic Doppler profilers) lack sufficient precision for device simulation, and rigid tower-mounted measurements are very expensive and technically challenging in the tidal environment. Moorings offer a low-cost, site-adaptable and robust deployment platform, and ADVs provide the necessary precision to accurately quantify turbulence.

16 TIDAL AND WAVE POWER↗