SEARCH · Engineering Papers

Results for “Dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2016

Forward and backward in time dispersion of fluid and inertial particles in isotropic turbulence

In this paper, we investigate both theoretically and numerically the Forward-In-Time (FIT) and Backward-In-Time (BIT) dispersion of fluid and inertial particle-pairs in isotropic turbulence. Fluid particles are known to separate faster BIT than FIT in three-dimensional turbulence, and we find that inertial particles do the same. However, we find that the irreversibility in the inertial particle dispersion is in general much stronger than that for fluid particles. For example, the ratio of the BIT to FIT mean-square separation can be up to an order of magnitude larger for the inertial particles than for the fluid particles. We also find that for both the inertial and fluid particles, the irreversibility becomes stronger as the scale of their separation decreases. Regarding the physical mechanism for the irreversibility, we argue that whereas the irreversibility of fluid particle-pair dispersion can be understood in terms of a directional bias arising from the energy transfer process in turbulence, inertial particles experience an additional source of irreversibility arising from the non-local contribution to their velocity dynamics, a contribution that vanishes in the limit St → 0, where St is the particle Stokes number. For each given initial (final, in the BIT case) separation, r 0 , there is an optimum value of St for which the dispersion irreversibility is strongest, as such particles are optimally affected by both sources of irreversibility. We derive analytical expressions for the BIT, mean-square separation of inertial particles and compare the predictions with numerical data obtained from a Re λ ≈ 582 (where Re λ is the Taylor Reynolds number) Direct Numerical Simulation (DNS) of particle-laden isotropic turbulent flow. The small-time theory, which in the dissipation range is valid for times ≤max[Stτ η , τ η ] (where τ η is the Kolmogorov time scale), is in excellent agreement with the DNS. The theory for long-times is in good agreement with the DNS provided that St is small enough so that the inertial particle motion at long-times may be considered as a perturbation about the fluid particle motion, a condition that would in fact be satisfied for arbitrary St at sufficiently long-times in the limit Re λ → ∞.

42 ENGINEERING↗

DOE OSTI2016

Molecular mobility in glassy dispersions

Dielectric spectroscopy was used to characterize the structural relaxation in pharmaceutical dispersions containing nifedipine (NIF) and either poly(vinyl) pyrrolidone (PVP) or hydroxypropyl methylcellulose acetate succinate (HPMCAS). The shape of the dielectric response (permittivity versus log time) curve was observed to be independent of temperature. Thus, for the pure NIF as well as the dispersions, the validity of the time-temperature superposition principle was established. Furthermore, though the shape of the full dielectric response varied with polymer concentration, the regime related to the α- or structural relaxation was found to superimpose for the dispersions, though not with the response of the NIF itself. Hence, there is a limited time-temperature-concentration superposition for these systems as well. Therefore, in this polymer concentration range, calculation of long relaxation times in these glass-forming systems becomes possible. We found that strong drug-polymer hydrogen bonding interactions improved the physical stability (i.e., delayed crystallization) by reducing the molecular mobility. The strength of hydrogen bonding, structural relaxation time, and crystallization followed the order: NIF$-$PV P>NIF$-$HPMCAS>NIF. With an increase in polymer concentration, the relaxation times were longer indicating a decrease in molecular mobility. The temperature dependence of relaxation time, in other words fragility, was independent of polymer concentration. This is the first application of the superposition principle to characterize structural relaxation in glassy pharmaceutical dispersions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Studies on dispersive stabilization of porous media flows

Motivated by a need to improve the performance of chemical enhanced oil recovery (EOR) processes, we investigate dispersive effects on the linear stability of three-layer porous media flow models of EOR for two different types of interfaces: permeable and impermeable interfaces. Results presented are relevant for the design of smarter interfaces in the available parameter space of capillary number, Peclet number, longitudinal and transverse dispersion, and the viscous profile of the middle layer. The stabilization capacity of each of these two interfaces is explored numerically and conditions for complete dispersive stabilization are identified for each of these two types of interfaces. Key results obtained are (i) three-layer porous media flows with permeable interfaces can be almost completely stabilized by diffusion if the optimal viscous profile is chosen, (ii) flows with impermeable interfaces can also be almost completely stabilized for short time, but become more unstable at later times because diffusion flattens out the basic viscous profile, (iii) diffusion stabilizes short waves more than long waves which leads to a “turning point” Peclet number at which short and long waves have the same growth rate, and (iv) mechanical dispersion further stabilizes flows with permeable interfaces but in some cases has a destabilizing effect for flows with impermeable interfaces, which is a surprising result. These results are then used to give a comparison of the two types of interfaces. It is found that for most values of the flow parameters, permeable interfaces suppress flow instability more than impermeable interfaces.

42 ENGINEERING↗

DOE OSTI2021

Probing nonlinear velocity profiles of shear-thinning, nematic platelet dispersions in Couette flow using x-ray photon correlation spectroscopy

In this study, we report experiments employing x-ray photon correlation spectroscopy (XPCS) to characterize the velocity profiles of complex fluids in Couette flow. The approach involves modeling the XPCS correlation functions obtained with the incident x-ray beam passing tangentially through the Couette cell gap at various distances from the inner wall. We first demonstrate the technique with measurements on a dilute colloidal dispersion in the Newtonian liquid glycerol, where the expected linear velocity profiles are recovered. We then employ the technique to map the shear-rate-dependent velocity profiles of a shear-thinning dispersion of nematically ordered Gibbsite platelets. The nonlinear velocity profiles of the Gibbsite dispersion include a narrow slip region adjacent to the outer wall and a band with a small velocity gradient in the interior of the gap that evolves into a region increasingly resembling plug flow with increasing shear rate. Variations in the velocity profile along the vorticity direction indicate an instability in the interface between this region of small velocity gradient and a region of high velocity gradient near the inner wall. The analysis of the small-angle scattering patterns provides information about the spatial and temporal variations in the nematic order of the Gibbsite dispersion and their coupling to the velocity profile. Additional potential applications of this XPCS-based technique and comparisons with established methods for characterizing velocity profiles are discussed.

42 ENGINEERING↗

DOE OSTI2023

Measurement of 2D density profiles using a second-harmonic, dispersion interferometer

A second-harmonic, dispersion interferometer is used to image large-area (≃5 cm 2 ) plasma-jet and gas-jet density profiles. Achromatic telescopes magnify the diameters of the primary-laser beam (1064 nm) and its second-harmonic (532 nm) before probing the sample and de-magnify the beam diameters after the sample, where the primary beam transfers its phase change to a second, second-harmonic beam, allowing the sample’s dispersive-phase change to be measured between two, orthogonally polarized second harmonic beams. The telescopes produce an azimuthally symmetric, dispersive-phase shift in the sample + background phase-change image and in the background phase-change image, which is removed by digital subtraction. The interferometer’s performance was verified using standard-optical components as dispersive elements (BK7 lenses and wedge plates), resolving a minimum, phase-change sensitivity of ΔΦ min ≳ 15 mrad and spatial resolution of Δx res ≃ 100 μm. The phase change produced by unknown-density objects (a pulsed-plasma-jet and a pulsed-gas-jet) was measured, and their data were used to recover the original, 2D density profiles using an inverse Abel transform: peak-number density, N gas ≃ 6 × 10 20 cm –3 and N e ≃ 5 × 10 16 cm –3 ; line-integrated density, ∫N gas dl ~ 2 × 10 19 cm –2 and ∫N e dl ~ 1 × 10 16 cm –2 . The techniques and methods developed here are scalable to even larger probe-beam diameters and frame-capture rates, leading to a diagnostic capability that is well-suited for applications involving the real-time measurement of density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2015

Chromatic dispersion effects in ultra-low coherence interferometry

We consider the properties of an interference signal shift from zero-path-difference position in the presence of an uncompensated dispersive layer in one of the interferometer arms. It is experimentally shown that in using an ultra-low coherence light source, the formation of the interference signal is also determined by the group velocity dispersion, which results in a nonlinear dependence of the position of the interference signal on the geometrical thickness of the dispersive layer. The discrepancy in the dispersive layer and compensator refractive indices in the third decimal place is experimentally shown to lead to an interference signal shift that is an order of magnitude greater than the pulse width. (interferometry)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2019

The role of dispersion in the mechanism of femtosecond pulse self-shortening in Kerr media

We investigate the influence of material dispersion on the mechanism of self-shortening of femtosecond pulses interacting with fused silica plates having thicknesses an order of magnitude smaller than the dispersion length for the initial 72-fs pulse. The femtosecond pulse self-shortening is observed at large values of the B integral, when small-scale self-focusing develops in the central part of the pulse; this self-focusing plays the role of an optical shutter selecting the unperturbed radiation of the pulse leading edge. A study of the femtosecond pulse self-shortening in 1- and 3-mm-thick fused silica samples reveals that, under the experimental conditions in use, the self-phase modulation enhances the role of dispersion in the formation of a shortened pulse. With an increase in the sample thickness, the shortened pulse width increases as a result of the dispersion spread of the initial pulse in time. At the same time, this shortened pulse remains close to the transform-limited one, independent of the sample thickness. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2015

PULSAR TIMING ERRORS FROM ASYNCHRONOUS MULTI-FREQUENCY SAMPLING OF DISPERSION MEASURE VARIATIONS

Free electrons in the interstellar medium cause frequency-dependent delays in pulse arrival times due to both scattering and dispersion. Multi-frequency measurements are used to estimate and remove dispersion delays. In this paper, we focus on the effect of any non-simultaneity of multi-frequency observations on dispersive delay estimation and removal. Interstellar density variations combined with changes in the line of sight from pulsar and observer motions cause dispersion measure (DM) variations with an approximately power-law power spectrum, augmented in some cases by linear trends. We simulate time series, estimate the magnitude and statistical properties of timing errors that result from non-simultaneous observations, and derive prescriptions for data acquisition that are needed in order to achieve a specified timing precision. For nearby, highly stable pulsars, measurements need to be simultaneous to within about one day in order for the timing error from asynchronous DM correction to be less than about 10 ns. We discuss how timing precision improves when increasing the number of dual-frequency observations used in DM estimation for a given epoch. For a Kolmogorov wavenumber spectrum, we find about a factor of two improvement in precision timing when increasing from two to three observations but diminishing returns thereafter.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2013

TWO TIMESCALE DISPERSAL OF MAGNETIZED PROTOPLANETARY DISKS

Protoplanetary disks are likely to be threaded by a weak net flux of vertical magnetic field that is a remnant of the much larger fluxes present in molecular cloud cores. If this flux is approximately conserved its dynamical importance will increase as mass is accreted, initially by stimulating magnetorotational disk turbulence and subsequently by enabling wind angular momentum loss. We use fits to numerical simulations of ambipolar dominated disk turbulence to construct simplified one-dimensional evolution models for weakly magnetized protoplanetary disks. We show that the late onset of significant angular momentum loss in a wind can give rise to ''two timescale'' disk evolution in which a long phase of viscous evolution precedes rapid dispersal as the wind becomes dominant. The wide dispersion in disk lifetimes could therefore be due to varying initial levels of net flux. Magnetohydrodynamic (MHD) wind triggered dispersal differs from photoevaporative dispersal in predicting mass loss from small (<1 AU) scales, where thermal winds are suppressed. Our specific models are based on a limited set of simulations that remain uncertain, but qualitatively similar evolution appears likely if mass is lost from disks more quickly than flux, and if MHD winds become important as the plasma β decreases.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Viscous dissipation in a gas of one-dimensional fermions with generic dispersion

A well-known feature of the classical monoatomic gas is that its bulk viscosity is strongly suppressed because the single-particle dispersion is quadratic. On the other hand, in condensed matter systems the effective single -particle dispersion is altered by lattice effects and interactions. In this work, we study the bulk viscosity of one-dimensional Fermi gases with generic energy-momentum dispersion relations. As an application, viscous dissipation arising from lattice effects is analyzed for the tight-binding model. In addition, we investigate how weak interactions affect the bulk viscosity. Finally, we discuss viscous dissipation in the regime in which the Fermi gas is not fully equilibrated, as can occur when the system is driven at frequencies that exceed the rate of fermion backscattering. In this case, the Fermi gas is described by three bulk viscosities, which we obtain for a generic single-particle dispersion.

1-dimensional systems↗

DOE OSTI2024

Three-dimensional dispersion in the type-II Dirac semimetals PtTe 2 and PdTe 2 revealed through circular dichroism in angle-resolved photoemission spectroscopy

PtTe 2 and PdTe 2 are among the first transition metal dichalcogenides that were predicted to host type-II Dirac fermions, exotic particles prohibited in free space. These materials are layered and air stable, which makes them top candidates for technological applications that take advantage of their anisotropic magnetotransport properties. Here, in this work, we provide a detailed characterization of the electronic structure of PtTe 2 and PdTe 2 using angle-resolved photoemission spectroscopy (ARPES) and density functional theory calculations, offering an alternative interpretation for one of the Dirac-like dispersions in these materials. Through the use of circularly polarized light, we report a different behavior of such dispersion in PdTe 2 compared to PtTe 2 , that we relate to a symmetry analysis of the dipole matrix element. Such analysis reveals a link between the observed circular dichroism and the different momentum-dependent terms in the dispersion of these two compounds, despite their close similarity in crystal structure. Additionally, our data show a clear difference in the circular dichroic signal for the type-II Dirac cones characteristic of these materials, compared to their topologically protected surface states. Our paper provides a useful reference for the ARPES characterization of other transition metal dichalcogenides with topological properties and illustrates the use of circular dichroism as a guide to identify the topological character and attributes of two otherwise equivalent band dispersions.

angle-resolved photoemission spectroscopy↗

DOE OSTI2016

Interlayer excitons with tunable dispersion relation

Interlayer excitons, comprising an electron in one material bound by Coulomb attraction to a hole in an adjacent material, are composite bosons that can assume a variety of many-body phases. The phase diagram of the bosonic system is largely determined by the dispersion relation of the bosons, which itself arises as a combination of the dispersion relations of the electron and hole separately. Here I show that in situations where either the electron or the hole has a nonmonotonic, “Mexican hat-shaped” dispersion relation, the exciton dispersion relation can have a range of qualitatively different forms, each corresponding to a different many-body phase at low temperature. Finally, this diversity suggests a platform for continuously tuning between different quantum phases using an external field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2018

Effect of Chain Length Dispersity on the Mobility of Entangled Polymers

While nearly all theoretical and computational studies of entangled polymer melts have focused on uniform samples, polymer synthesis routes always result in some dispersity, albeit narrow, of distribution of molecular weights ( Ð M = M w / M n ~ 1.02 – 1.04 ). Here, the effects of dispersity on chain mobility are studied for entangled, disperse melts using a coarse-grained model for polyethylene. Polymer melts with chain lengths set to follow a Schulz-Zimm distribution for the same average M w = 36 kg / mol with Ð M = 1.0 to 1.16, were studied for times of 600 – 800 μ s using molecular dynamics simulations. This time frame is longer than the time required to reach the diffusive regime. We find that dispersity in this range does not affect the entanglement time or tube diameter. However, while there is negligible difference in the average mobility of chains for the uniform distribution Ð M = 1.0 and Ð M = 1.02 , the shortest chains move significantly faster than the longest ones offering a constraint release pathway for the melts for larger Ð M .

36 MATERIALS SCIENCE↗

DOE OSTI2021

Crossing Symmetric Dispersion Relations for Mellin Amplitudes

We consider manifestly crossing symmetric dispersion relations for Mellin amplitudes of scalar four point correlators in conformal field theories. This allows us to set up the nonperturbative Polyakov bootstrap for the conformal field theories in Mellin space on a firm foundation, thereby fixing the contact term ambiguities in the crossing symmetric blocks. Our new approach employs certain “locality” constraints replacing the requirement of crossing symmetry in the usual fixed-t dispersion relation. Using these constraints, we show that the sum rules based on the two channel dispersion relations and the present dispersion relations are identical. Our framework allows us to connect with the conceptually rich picture of the Polyakov blocks being identified with Witten diagrams in anti-de Sitter space. We also give two sided bounds for Wilson coefficients for effective field theories in anti-de Sitter space.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Floquet engineering of polaritonic amplification in dispersive photonic time crystals

In this study, we investigate the dynamics of dispersive photonic time crystals (PTCs) and their potential applications for controlling light-matter interaction. Using the Lorentz-Drude as dispersive material model, we analyze the effects of periodic modulation of dispersion parameters through both theoretical and numerical analysis, revealing the emergence of hybrid bandgaps from the interaction of polaritonic branches with distinctive characteristics. Our study demonstrates that dispersive PTCs offer novel excitation channels and amplification possibilities, that require lower modulation frequencies compared to nondispersive systems thus alleviating experimental challenges for the realization of PTCs in the optical regime. These findings pave the way for advancements in polaritonic lasing and resonant Raman scattering.

Classical optics↗

DOE OSTI2026

Dispersive and nondispersive 𝐾-matrix formalisms

The modeling of coupled-channel effects has become increasingly important due to the availability of highly precise data for a large variety of hadronic (re)scattering processes. The 𝐾-matrix is a powerful, yet comparatively simple, method to describe scattering amplitudes, including coupled-channel effects, with the aim of interpreting experimental data. Throughout the literature, a range of dispersive and nondispersive 𝐾-matrix methods are employed. Here, we compare the dispersive and nondispersive formulations in the context of the N/D method. It is shown that the methods are equivalent in the physical region under 𝐾-matrix reparametrization. Differences away from the physical region are examined. Applications to synthetic data are used to illustrate the effects of model choices concerning form factors and the application of dispersion relations, with the goal of clarifying best practices. We find no clear preference with regard to dispersive modeling. In contrast, we find that interpretational ambiguity of the bare model parameters—and even of the form of the bare model—is endemic, and recommend a thorough sampling of data and model spaces to assess conclusion robustness.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2026

Fast Sideband Control of a Multimode Cavity Memory with Weak Dispersive Coupling to a Transmon

Mitigating ancilla-mediated error channels is a critical challenge in controlling high-quality superconducting cavities using circuit quantum electrodynamics (cQED). We address this by weakening the dispersive coupling while demonstrating fast, high-fidelity multimode control through transmon-mediated sideband interactions. We implement transmon-cavity SWAP gates with speeds up to 30 times larger than the bare dispersive coupling. Combined with transmon rotations, this enables universal state preparation in a single mode, though achieving unitary gates and extending control to multiple modes remains a challenge. In this work, we overcome this limitation by introducing two control strategies: (i) a shelving technique that stores populations in sideband-transparent states, and (ii) a method that exploits the dispersive shift to implement photon-number-selective transmon-cavity SWAP gates. We use these protocols to prepare Fock and binomial code states across any of the ten modes of a multimode cavity with millisecond coherence times—serving as a multimode quantum memory. We demonstrate unitaries that encode and decode an arbitrary qubit state from the transmon into corresponding vacuum and Fock state superpositions, as well as entangled NOON states of cavity mode pairs—a scheme extendable to arbitrary multimode Fock encodings in the cavity modes. Furthermore, we implement a new binomial encoding gate that converts arbitrary transmon superpositions into binomial code states in any cavity mode at a rate exceeding the dispersive shifts in our system, achieving an average post-selected state fidelity of 96.3% in a 4 μ⁢s gate time. By using precalibrated transmon and sideband pulses, our work demonstrates multimode control with significantly reduced calibration overhead, enabling efficient unitary operations using sideband interactions in multimode cQED systems.

Huang, Jordan [Rutgers Univ., Piscataway, NJ (Unit↗

DOE OSTI2020

Diffraction gratings with two-orders-of-magnitude-enhanced dispersion rates for sub-meV resolution soft X-ray spectroscopy

Diffraction gratings with large angular dispersion rates are central to obtaining high spectral resolution in grating spectrometers operating over a broad spectral range from infrared to soft X-ray domains. The greatest challenge is of course to achieve large dispersion rates in the short-wavelength X-ray domain. Here it is shown that crystals in non-coplanar asymmetric X-ray Bragg diffraction can function as high-reflectance broadband soft X-ray diffraction gratings with dispersion rates that are at least two orders of magnitude larger than those that are possible with state-of-the-art man-made gratings. Additionally, this opens new opportunities to design and implement soft X-ray resonant inelastic scattering (RIXS) spectrometers with spectral resolutions that are up to two orders of magnitude higher than what is currently possible, to further advance a very dynamic field of RIXS spectroscopy, and to make it competitive with inelastic neutron scattering. Examples of large-dispersion-rate crystal diffraction gratings operating near the 930 eV L 3 absorption edge in Cu and of the 2.838 keV L 3 -edge in Ru are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗