Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Directional Effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Cost‐Effective and Scalable Approach for the Separation and Direct Cathode Recovery from End‐of‐Life Li‐Ion Batteries

Li-ion battery recycling presents a promising opportunity to decrease dependence on foreign sources of materials and harvest precious materials within the United States. Herein, a superior complete direct recycling process on individual end-of-life cells is reported where the recovered high-purity cathode active material, as well as electrolyte salt Li hexafluorophosphate (LiPF 6 ) can be reused without significant processing. This new process utilizes a series of mechanical separation steps that enable the separation of the cathode and anode active materials while they are still attached to their current collectors. Using this type of process can significantly reduce metal contamination and enable a clean cathode that can be directly recycled. The process if implemented commercially can greatly reduce the environmental burden of batteries as the greenhouse gas emissions of 8.25 kg CO 2 e kg −1 from the direct recycling process are 64% lower compared to those from virgin production of cathode material. During electrochemical testing of the recovered LiNi 0.6 Mn 0.2 Co 0.2 O 2 a discharge capacity of ≈160 mAh g −1 and good cyclability of over 250 cycles at 0.33C are achieved. This success paves a new pathway to explore and optimize existing Li-ion battery recycling procedures.

electrolyte reuse↗
DOE OSTI2024

Spatial imaging of polarized deuterons at the Electron-Ion Collider

We study diffractive vector meson production at small-x in the collision of electrons and polarized deuterons e + d $\uparrow$ . We consider the polarization dependence of the nuclear wave function of the deuteron, which results in an azimuthal angular dependence of the produced vector meson when the deuteron is transversely polarized. The Fourier coefficients extracted from the azimuthal angular dependence of the vector meson differential cross-section exhibit notable differences between longitudinally and transversely polarized deuterons. The angular dependence of the extracted effective deuteron radius provides direct insight into the structure of the polarized deuteron wave function. Furthermore, we observe slightly increased gluon saturation effects when the deuteron is longitudinally polarized compared to the transversely polarized case. The small-x observables studied in this work will be accessible at the future Electron-Ion Collider.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Forecasting and modeling of the COVID-19 pandemic in the USA with a timed intervention model

We propose a novel Timed Intervention S, P, E, I, Q, R, D model for projecting the possible futures of the COVID-19 pandemic in the USA. The proposed model introduces a series of timed interventions that can account for the influence of real time changes in government policy and social norms. We consider three separate types of interventions: (i) Protective interventions: Where population moves from susceptible to protected corresponding to mask mandates, stay-at-home orders and/or social distancing. (ii) Release interventions: Where population moves from protected to susceptible corresponding to social distancing mandates and practices being lifted by policy or pandemic fatigue. (iii) Vaccination interventions: Where population moves from susceptible, protected, and exposed to recovered (meaning immune) corresponding to the mass immunization of the U.S. Population. By treating the pandemic with timed interventions, we are able to model the pandemic extremely effectively, as well as directly predicting the course of the pandemic under differing sets of intervention schedules. We show that without prompt effective protective/vaccination interventions the pandemic will be extended significantly and result in many millions of deaths in the U.S.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Ferroelectric Semimetals with α-Bi/SnSe van der Waals Heterostructures and Their Topological Currents

We show that proximity effects can be utilized to engineer van der Waals heterostructures (vdWHs) displaying semimetallic spin-ferroelectricity locking, where ferroelectricity and semimetallic spin states are confined to different layers, but are correlated by means of proximity effects. Our findings are supported by first principles calculations involving α-Bi/SnSe bilayers. We show that such systems support ferroelectrically switchable nonlinear anomalous Hall effect originating from large Berry curvature dipoles as well as direct and inverse spin Hall effects with giant bulk spin-charge interconversion efficiencies. In conclusion, the giant efficiencies are consequences of the proximity-induced semimetallic nature of low energy electron states, which are shown to behave as two-dimensional pseudo-Weyl fermions by means of symmetry analysis and first principles calculations as well as direct angle-resolved photoemission spectroscopy measurements.

2-dimensional systems↗
DOE OSTI2020

Metastable nuclear isomers as dark matter accelerators

Inelastic dark matter and strongly interacting dark matter are poorly constrained by direct detection experiments since they both require the scattering event to deliver energy from the nucleus into the dark matter in order to have observable effects. We propose to test these scenarios by searching for the collisional deexcitation of metastable nuclear isomers by the dark matter particles. The longevity of these isomers is related to a strong suppression of γ- and β-transitions, typically inhibited by a large difference in the angular momentum for the nuclear transition. The collisional deexcitation by dark matter is possible since heavy dark matter particles can have a momentum exchange with the nucleus comparable to the inverse nuclear size, hence lifting tremendous angular momentum suppression of the nuclear transition. This deexcitation can be observed either by searching for the direct effects of the decaying isomer, or through the rescattering or decay of excited dark matter states in a nearby conventional dark matter detector setup. Existing nuclear isomer sources such as naturally occurring 180m Ta, 137m Ba produced in decaying Cesium in nuclear waste, 177m Lu from medical waste, and 178m Hf from the Department of Energy storage can be combined with current dark matter detector technology to search for this class of dark matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

The Thermal Response of a Packed Bed Thermal Energy Storage System upon Saturated Steam Injection Using Distributed Temperature Sensing

The effectiveness of a thermal energy storage (TES) system is typically characterized with the help of thermal stratification or temperature gradients along the direction of heat injection, which is typically the flow direction of heat transfer fluid. The steepness of temperature gradients are a direct indicator of the effectiveness or efficiency of the heat storage or dispatch process. The temperature gradient evolution along the packed bed of ceramic particles upon saturated steam injection is presented in this work. Distributed temperature sensing based on optical frequency domain reflectometry was deployed in a packed bed of ceramic particles to capture the thermal front evolution in the axial direction. The physical processes accompanying steam injection in packed beds are complex due to phase change, transitioning two-phase flow, and changes in condensate accumulation. Therefore, the variation of thermal response of the TES system for various steam injection flow rates was experimentally studied using a high-resolution distributed temperature sensing system in a chemically inert alumina particle-packed bed. Distinct zones of different heat transfer modes were observed during the steam injection experiments. A distinct conduction zone, evident from diffuse thermal fronts, was observed at low flow rates, and these thermal gradients became sharper as the flow rate increased. The diffuse thermal fronts in the heat storage media suggest a low exergy efficiency of the TES system, as energy losses started initiating before a significant fraction of the bed was saturated with steam.

25 ENERGY STORAGE↗
DOE OSTI2021

GW band structure of monolayer MoS 2 using the SternheimerGW method and effect of dielectric environment

Monolayers of transition-metal dichalcogenides (TMD) hold great promise as future nanoelectronic and optoelectronic devices. An essential feature for achieving high device performance is the use of suitable supporting substrates, which can affect the electronic and optical properties of these two-dimensional (2D) materials. Here, we perform many-body GW calculations using the SternheimerGW method to investigate the quasiparticle band structure of monolayer MoS 2 subject to an effective dielectric screening model, which is meant to approximately describe substrate polarization in real device applications. We show that, within this model, the dielectric screening has a sizeable effect on the quasiparticle band gap, for example the gap renormalization is as large as 250 meV for MoS 2 with model screening corresponding to SiO 2 . Within the G 0 W 0 approximation, we also find that the inclusion of the effective screening induces a direct band gap, in contrast to the unscreened monolayer. We also find that the dielectric screening induces an enhancement of the carrier effective masses by as much as 27% for holes, shifts plasmon satellites, and redistributes quasiparticle weight. Our results highlight the importance of the dielectric environment in the design of 2D TMD-based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Effects of Wind Veer During the Morning and Evening Transitions

Direction and speed wind shear modify turbine performance by changing inflow conditions on turbine blades. Using observations from the 2013 CWEX campaign, we found the daily atmospheric boundary layer transitions (morning and evening) match periods of high electricity demand for a wind farm in central Iowa. Power production during these periods was undermined for large direction shear and low speed shear scenarios. The morning transition displayed larger direction shear over the rotor layer for most wind speeds compared to the evening period. This resulted in lower turbine performance for the morning compared to the evening and whole day. This study shows that the combined effect of direction and speed shear is affecting turbine operation during high electricity demand times of day, predominantly during the morning at this wind farm.

17 WIND ENERGY↗
DOE OSTI2020

NMR-Guided High-Temperature Electrolyte Design Using a Novel PF 5 Marker

The thermal degradation of electrolytes containing lithium hexafluorophosphate (LiPF 6 ) is a well-studied subject. However, practical application of the knowledge is difficult since the effects of the degradation process on battery performance are not well known. In this work, we propose a novel NMR experimental setup allowing direct observation of the effects of various perturbations on the electrolyte thermal degradation process, which guides the design and synthesis of new additives that improve lithium-ion battery performance at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of coaxial nozzle wear on catchment efficiency in direct energy deposition built components

Laser based Direct Energy Deposition (DED) systems using metallic powder feedstock are recognized as a promising manufacturing method for their ability to shorten production cycles and create complex part geometries. Components are built by generating a melt pool with a high-power laser beam while material is coaxially injected and left to solidify. An impediment to large scale use of DED lies in poor powder catchment efficiency, the condition in which a portion of injected powder escapes the melt pool resulting in a ratio of decreased printed material mass to mass of supplied feedstock. The wear state of a coaxial nozzle on a DED system within a hybrid manufacturing machine tool has been observed to decrease catchment efficiency over time. Herein this study investigates this effect by adapting flow visualization techniques to an in-situ process monitoring format, the implementation of a Computational Fluid Dynamics (CFD) simulation, and deposition testing. Nozzle geometric defects due to wear are identified and categorized, and the impact of nozzle tip wear, resulting in axial tip reduction, on powder catchment efficiency is proven by multiple calculation methods. A linear correlation between catchment efficiency and powder stream diameter is identified, causing a 15–20% loss in efficiency sustained over incremental nozzle tip reduction up to − 1 mm. These results provide a foundation for further study of wear effects and Zero defect manufacturing solutions for powder fed DED systems.

42 ENGINEERING↗
DOE OSTI2024

Studies of High Energy Density Discharge and Laser-Driven Deflagrating Plasma Stagnations

The goal of this proposal is to develop an understanding of the thermalization and mixing of high energy density (HED) interpenetrating and stagnating plasma deflagrations on two different platforms. The first is opposing gas-fed Z-pinch plasma expansions in a facility at Stanford University. The second is the convergence of multiple deflagration fronts generated by inverted corona laser ablations through experiments carried out by the P.I. as part of a larger team at the University of Rochester Laboratory for Laser Energetics. The link between the two platforms is the role played by kinetic effects that impact mixing and the conversion of directed to thermal energy. Such kinetic effects are important because of the relatively high temperatures despite high plasma densities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Effects of Structure and Filler on Mechanical Properties of Direct Ink Write Pads

Direct ink write (DIW) is an extrusion-based additive manufacturing (AM) technique that enables superior repeatability, property tuning, and material customization compared to conventional manufacturing techniques. In this research, DIW is used to print silicone foams that must accommodate the thermal expansion of other parts. This expansion requires the material to compress and subsequently recover. Thus, a key performance metric is reducing “compression set” or deformation retained after the material is compressed. For this study, a silicone resin was compounded with a getter material, 1,4 bis(phenylethynyl)benzene (DEB) mixed with carbon-supported palladium (Pd) and printed in a variety of lattice structures. The effects of the filler and print structure on compression set were evaluated. In these experiments, 0.5-inch diameter coupons were compressed to 75% their original height for 22 hours at 70 °C, and the change in height calculated at intervals between 30 minutes and 24 hours post-decompression. The unfilled pad with skin layers had the best compression set at 0.7% ± 0.1%, followed by the unfilled pad with no skins at 1.5% ± 0.1%. As the number of filled layers increased, compression set performance degraded. The pad with filled skin layers and all filled layers had a compression set of 7.0% ± 0.3%. Additionally, the reaction extent of DEB was found to increase compression set, possibly due to the diffusion of DEB to the surface at elevated temperatures. Imaging reveals extensive crystallization at the surface. These investigations show that a non-reinforcing filler will increase compression set but that print structure can mitigate this effect.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Direct current in a stirred optical lattice

We study how the energy dispersion of bosonic atoms loaded into an optical lattice becomes modified due to periodic circular stirring of the lattice to the second order in the strength of stirring. If the lattice breaks mirror symmetry, the bosonic atoms may acquire a nonzero group velocity at the center of the Brillouin zone and produce a nonzero direct current. Furthermore, this effect is similar to the circular photogalvanic effect in solid-state physics. It can be used to transport neutral bosonic atoms in an optical lattice over a given distance in an arbitrary direction. However, when the drive frequency is detuned to avoid resonant transitions with energy absorption, we argue that the induced current is not persistent, but transient. An experimental study of the relaxation of the induced current can provide insight about equilibrization in driven systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Effect of the inversion symmetry breaking on the orbital Hall effect: A model study

The orbital Hall effect (OHE) is the transverse flow of orbital moment in a solid in response to an applied electric field, analogous to the flow of spin moment in the spin Hall effect (SHE). Although the effect has not been directly observed, there is ample indirect evidence for its existence in a number of experiments. Here, we show that the OHE is enhanced in solids with broken inversion symmetry, which may be more suitable to observe the effect. The mechanism of the OHE is fundamentally different in solids with inversion symmetry, where the orbital moment is quenched in the Brillouin zone (BZ), from that in a solid with broken inversion symmetry, where an intrinsic orbital moment is already present, the motion of which under the applied electric field could lead to a robust OHE. Using a tight-binding model Hamiltonian of a simple cubic lattice with two atoms in the unit cell, we study the effect of the inversion symmetry breaking on the OHE. We show that with the increase in the strength of the broken symmetry, the magnitude of the intrinsic orbital moment in the Brillouin zone increases. This, in turn, enhances the orbital Hall conductivity, in particular, the part that is directly proportional to the orbital moment in the BZ, which we call the “noncentrosymmetric contribution.” If the spin-orbit coupling is present, which couples the orbital and spin moments, the OHE leads to the SHE, which also becomes enhanced by the broken inversion symmetry. Furthermore, our work has important implications for experimenters, suggesting that noncentrosymmetric solids may be more suitable for direct observation of the OHE.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Environmental Controls on Water Vapor Deuterium Excess in the Coastal Boundary Layer: An Information Theory Perspective

We use information theory to quantify the environmental controls on water vapor deuterium excess (D-excess) in coastal Southern California from June 2023 through February 2024. Using Shannon entropy, mutual information (MI), and joint mutual information, metrics that capture both linear and nonlinear relationships, we identify the most informative variables and variable combinations governing D-excess across contrasting marine and continental regimes. Relative humidity with respect to sea surface temperature (RHS) is consistently the strongest individual predictor, explaining up to 27% of D-excess variability during marine conditions but only 10% in continental air masses. The Relative humidity(RHS) + sea surface temperature (SST) combination demonstrates synergistic effects, where their joint influence (explaining up to 36% of D-excess variability) exceeds what either variable achieves individually, confirming their coupled influence on deuterium excess. Wind direction complements RHS most effectively during continental conditions. The best three-variable combination (RHS + SST + Planetary Boundary Layer height) explains 38% of D-excess variability in marine air, while no combination exceeds 20% explanatory power during continental periods. Information theory shows that heteroscedasticity in D-excess relationships indicates regime shifts in controlling processes and quantifies fundamental constraints on predictor variables: some environmental factors like surface pressure or water vapor flux contain insufficient information content to explain D-excess variability regardless of their physical relevance. These results highlight the different predictability limits between marine and continental regimes, challenging the adequacy of linear models and providing a rigorous framework for quantifying the information content of isotope-climate relationships with implications for both modern and paleoclimate applications.

information theory↗