Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Design of experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Reducing Printed Circuit Board Emissions with Low-Noise Design Practices

This paper presents the results of an experiment designed to determine the effectiveness of adopting several low-noise printed circuit board (PCB) design practices. Two boards were designed and fabricated, each consisting of identical mixed signal circuitry. Several important differences were introduced between the board layouts: one board was constructed using recommended low-noise practices and the other constructed without such attention. The emissions from the two boards were then measured and compared, demonstrating an improvement in radiated emissions of up to 22 dB.

Bradley, Arthur T.↗
NASA NTRS1999

The Guara Campaign: Rocket-Radar Investigations of the Earth's Upper Atmosphere at the Magnetic and Geographic Equators

The Guara Campaign consisted of a series of sounding rockets that were launched from August to October, 1994 at a new launch facility at Alcantara, Brazil, which is within one degree of the Earth's magnetic equator. The campaign was based on focused scientific experiments designed to investigate the electrodynamics and irregularities in the ionosphere and mesosphere at the Earth's magnetic equator and to study their relationship with neutral upper atmosphere motions. In all, 13 large sounding rockets and 20 small meteorological rockets were launched as part of four different experiment groups designed to investigate: (1) the daytime equatorial electrojet, (2) very high altitude Spread-F processes, (3) sunset electrodynamics, and (4) middle atmosphere-thermosphere coupling at the equator. The instrumentation on the sounding rockets varied with each investigation, but primarily included experiments to measure electric fields, currents, plasma densities,- neutral winds, neutral densities and temperatures, and ionospheric instabilities. All of the experiments utilized ground-based scientific instruments including a VHF backscatter radar interferometer, magnetometers, ionosondes, and scintillation receivers. An overview of each investigation is provided, along with a description of the launch site and the ground-based experiments. Scientific highlights of the campaign are provided.

Pfaff, Robert F., Jr.↗
NASA NTRS1999

Coupled Land Atmosphere Predictability

We have designed and executed a set of predictability experiments, designed around the driest and wettest June soil moisture anomalies from a CCM3 simulation forced by observed SST for the period from 1958 through 1998. Each set contains an ensemble of five runs, all begun on June I radiation date. One set of these experiments helps to assess the extent to which the wet or dry conditions depend solely on the initial state of the atmosphere. The other set of experiments helps to assess the extent to which the wet or dry conditions depend sole on the initial state of the land surface. Preliminary analysis of these experiments suggests that the initial atmospheric state is more important than the initial state of the surface soil moisture in predicting the occurrence of wet or dry periods. These results suggest that when the atmosphere is inclined to generate dry surface conditions (through reduced moisture availability and increased evaporation) it matters little what initial levels of soil water are at; the soil will rapidly dry out. The ensemble forcing the ensembles with dry soil conditions, but utilizing 'normal' atmospheric conditions show little if any indication of the sharp reduction in soil moisture experienced in the control, indicating that the 'normal' atmospheric state is more important than the initial state of the soil moisture in predicting the occurrence of drought. Our work to date has documented the response of surface hydrologic variability, particularly over North America, to atmospheric forcing. While we have seen some suggestion that pre-existing surface anomalies can affect atmospheric circulation over this region, by far the strongest signal is the atmospheric anomalies leading those of soil moisture and surface energy balance changes. This is not an unexpected result since wintertime NA precipitation links to remote atmospheric forcing by ENSO are known to be statistically significant. While warm season links to remote forcing are more tenuous and not well explored, the present results encourage us to examine in more detail the SST forcing from the tropical and North Pacific.

Roads, John↗
DOE OSTI2023

IER 441: Experiments to Measure the Effect of Tantalum on Critical Systems (SNL/ORNL) [Slides]

This presentation provides information on the experiments to measure the effect of Tantalum (Ta) on critical systems. This talk presents details on the Sandia Critical Experiments Program with the Seven Percent Critical Experiment (7uPCX) and the Burnup Credit Critical Experiment (BUCCX). The presentation highlights motivations, experiment design, and evaluations and publications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Preliminary Design of Critical Experiments Involving Commercially Available B 4 C Neutron Absorber Plates with Low-Enriched UO 2 Fuel

The International Criticality Safety Benchmark Evaluation Project (ICSBEP) is an initiative to provide high-quality benchmark data in a standardized format for criticality safety analysts to use to validate calculational tools and nuclear data. In the last released 2022 version, the ICSBEP handbook contains over 5,000 critical experiment descriptions, results, and associated models. This paper describes the critical configurations proposed and calculations performed as part of the conceptual design phase of Integral Experiment Request (IER) 554 (IER-554). The goal of IER-554 is to add to the benchmark experiments available to the criticality safety community by designing critical experiments that can analyze how adding commercially available Boralcan plates to an assembly of low-enriched UO2 fuel rods affects the effective neutron multiplication factor (k eff ). Boralcan, a neutron absorber product developed by Rio Tinto, is made of B4C in an Al 1100 matrix and is commonly used for criticality suppression in fuel storage pools. In the current version of the ICSBEP handbook, only a few dated critical experiments involve B4C materials, and none involve Boralcan in a thin plate shape. The experiments designed as part of IER-554 are intended to be performed at the Sandia Pulsed Reactor Facility/Critical Experiments (SPRF/CX) apparatus at Sandia National Laboratories. SPRF/CX is a well-characterized assembly considered trustworthy by the benchmarking community because of the numerous high-quality evaluations with very low experimental uncertainties included in the ICSBEP handbook. Figure 1 illustrates the assembly for a particular configuration from LCT-078, one of the published benchmarks in the ICSBEP handbook. The experiments will be moderated and reflected by light water at ambient atmospheric pressure. Before the plates are inserted in the critical assembly, they will be characterized with x-ray computed tomography (XCT) to identify the sizes and distribution of the B 4 C powder particles inside the plates. The preliminary design calculations were performed with SCALE 6.3.0 using the KENO V.a sequence for the criticality calculations, the CE-TSUNAMI-3D sequence for the sensitivity and uncertainty studies, and the ENDF/B-VII.1 Continuous Energy cross section library. All the calculation results presented have 10 pcm statistical uncertainties. A set of critical experiments with Boralcan plates could increase the confidence of the criticality safety community in its modeling methods when using this type of neutron absorber material. Experiments would also help validate k eff calculations, and the industry could use these validations to change the B loading credit limits from the US Nuclear Regulatory Commission standard review plan for dry cask storage of spent nuclear fuel. This paper summarizes only part of the analysis documented in the preliminary design report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Challenges and successes in establishing a multipurpose fuels and materials irradiation capsule [Slides]

This presentation discusses the challenges and success related to designing and fabricating multipurpose capsules for irradiation experiments for irradiation within the Advanced Test Reactor (ATR) to be presented at tje DEVICE-MTR irradiation experiment design working group meeting hosted by the Japanese Atomic Energy Agency (JAEA). The information herein is limited to the design of the capsules only and no programmatic information from any project supporting the design of the multipurpose capsule is discussed. The intent of the design team was establish a capsule design that could accommodate multiple different irradiation project needs for the irradiation of nuclear fuel and materials of interest in the nuclear field. The main points of the presentation are as follows: use of tin as a molten thermal bond material was selected for the fueled capsule design and was found to be inadequate as it would corrode the stainless steel at high temperatures, this capsule design has high sensitivity to manufacturing of the gas gap and control of the gas mixture, and the fueled capsule has experienced welding challenges with the inner capsule material 800H Incoloy.

42 ENGINEERING↗
NASA NTRS1973

HEAO gamma-ray astronomy experiments

Two gamma ray experiments designed to measure and map the cosmic gamma ray spectrum in the 0.1 to 10 MeV region are outlined. The sensitivity and capability of the instruments- a high resolution gamma ray spectrometer that uses solid state detectors and a combined UCSD-MIT scintillation system are also given. These experiment were designed for the HEAO program.

Metzger, A. E.↗
NASA NTRS1982

NASA Experiment on Tropospheric-Stratospheric Water Vapor Transport in the Intertropical Convergence Zone

The following six papers report preliminary results obtained from a field experiment designed to study the role of tropical cumulo-nimbus clouds in the transfer of water vapor from the troposphere to the stratosphere over the region of Panama. The measurements were made utilizing special NOAA enhanced IR satellite images, radiosonde-ozonesondes and a NASA U-2 aircraft carrying. nine experiments. The experiments were provided by a group of NASA, NOAA, industry, and university scientists. Measurements included atmospheric humidity, air and cloud top temperatures, atmospheric tracer constituents, cloud particle characteristics and cloud morphology. The aircraft made a total of eleven flights from August 30 through September 18, 1980, from Howard Air Force Base, Panama; the pilots obtained horizontal and vertical profiles in and near convectively active regions and flew around and over cumulo-nimbus towers and through the extended anvils in the stratosphere. Cumulo-nimbus clouds in the tropics appear to play an important role in upward water vapor transport and may represent the principal source influencing the stratospheric water vapor budget. The clouds provide strong vertical circulation in the troposphere, mixing surface air and its trace materials (water vapor, CFM's sulfur compounds, etc.) quickly up to the tropopause. It is usually assumed that large scale mean motions or eddy scale motions transport the trace materials through the tropopause and into the stratosphere where they are further dispersed and react with other stratospheric constituents. The important step between the troposphere and stratosphere for water vapor appears to depend upon the processes occurring at or near the tropopause at the tops of the cumulo-nimbus towers. Several processes have been sugested: (1) The highest towers penetrate the tropopause and carry water in the form of small ice particles directly into the stratosphere. (2) Water vapor from the tops of the cumulonimbus clouds is transported somehow through the tropopause, the vapor pressure being controlled by the temperature at the tops of the clouds; the dryness of the stratosphere could be explained if most of the transport occurs in connection with very high clouds in regions with very high and cold tropopause. (3) Cumulo-nimbus anvils act as terrestrial-radiation shields allowing the ice particle temperatures near cloud tops to cool radiatively below the supersaturation point; this cooling would cause a vapor deposition on the ice particles which will settle out and thus act as water scavengers. The experiment was designed to collect information on these detailed physical processes near and above the tropopause in order to assess their importance and the role they play in controlling stratospheric water vapor humidity.

Page, William A.↗
DOE OSTI2023

Numerical simulations of the Los Alamos gapstick experiment

The gapstick is a high explosive (HE) sensitivity test recently developed at Los Alamos. The experiment design was motivated by the traditional gap test and consists of a series of HE and inert pellets in a rate stick configuration. The inert pellets are made increasingly longer so that eventually the attenuated shock is unable to initiate the next HE pellet. While the gapstick is a mechanically simple experiment it poses several challenges for numerical simulation. In particular, accurately modeling the HE initiation and detonation phenomena requires a reactive burn model with sufficient mesh resolution to capture the reaction scales. In this work, the Scaled Uniform Reactive Front (SURF) and Arrhenius Wescott-Stewart-Davis (AWSD) burn models are used for simulations of a PBX 9501 (95 wt% HMX, 5% binder) gapstick. Furthermore, the material model for the inert pellet material, Polyvinylidene Fluoride (PVDF), has a direct influence on the shock propagation and a new equation of state (EOS) calibration for PVDF is developed using available Hugoniot data. Despite some challenges, the simulations are able to reasonably predict shock transit velocities and detonation failure in the gapstick.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1993

Autogenic-Feedback Training (AFT) as a preventive method for space motion sickness: Background and experimental design

Finding an effective treatment for the motion sickness-like symptoms that occur in space has become a high priority for NASA. The background research is reviewed and the experimental design of a formal life sciences shuttle flight experiment designed to prevent space motion sickness in shuttle crew members is presented. This experiment utilizes a behavioral medicine approach to solving this problem. This method, Autogenic-Feedback Training (AFT), involves training subjects to voluntarily control several of their own physiological responses to environmental stressors. AFT has been used reliably to increase tolerance to motion sickness during ground-based tests in over 200 men and women under a variety of conditions that induce motion sickness, and preliminary evidence from space suggests that AFT may be an effective treatment for space motion sickness as well. Proposed changes to this experiment for future manifests are included.

Cowings, Patricia S.↗
DOE OSTI2023

Magnetic bulk photovoltaic effect: Strong and weak field

Shift current and ballistic current have been proposed to explain the bulk photovoltaic effect (BPVE), and there have been experiments designed to separate the two mechanisms. These experiments are based on the assumption that under magnetic field, ballistic current can have a Hall effect while the shift current cannot, which is from some energy-scale arguments and has never been proven. A recent work [D. Hornung and R. von Baltz, Phys. Rev. B 103, 195203 (2021)] using quantum transport formalism achieves a conclusion that shift current indeed has a Hall current, seemingly contradicting the previous assumption and making the situation more confusing. Moreover, the behavior of BPVE under strong magnetic field is still unexplored. In this Letter, using a minimal two-dimensional tight-binding model, we carry out a systematic numerical study of the BPVE under weak and strong magnetic field by treating the field in a nonperturbative way. Further, our model clearly shows the appearance of the magnetically induced ballistic current along the transverse direction, which agrees with the previous predictions, and interestingly a sizable longitudinal response of the shift current is also observed, a phenomenon that is not captured by any existing theories where the magnetic field is treated perturbatively. More surprisingly, drastically different shift current is found in the strong-field regime, and the evolution from weak to strong field resembles a phase transition. We hope that our work could resolve the debate over the behavior of BPVE under magnetic field, and the strong-field behavior of shift current is expected to inspire more studies on the relation between nonlinear optics and quantum geometry.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Data Compilation and Analysis from the Sirius-1 Experiment at TREAT for Transient Simulation Validation

This report assembles comprehensive data from the Sirius-1 experiment conducted by Idaho National Laboratory in collaboration with the National Aeronautics and Space Administration. The primary goal is to provide a robust data set that external users can utilize for the validation of computational methods for transient multiphysics simulations. By compiling all relevant data, including experiment design calculations, detailed engineering drawings for the experiment and data from reactor and fuel specimen measurement, this report is intended to serves as a reference for researchers and engineers working on the development and validation of computational models for transient nuclear behavior.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
NASA NTRS1973

Study of airborne science experiment management concepts for application to space shuttle, volume 2

Airborne research management and shuttle sortie planning at the Ames Research Center are reported. Topics discussed include: basic criteria and procedures for the formulation and approval of airborne missions; ASO management structure and procedures; experiment design, development, and testing aircraft characteristics and experiment interfaces; information handling for airborne science missions; mission documentation requirements; and airborne science methods and shuttle sortie planning.

Mulholland, D. R.↗
NASA NTRS1976

Development of a Self-contained Heat Rejection Module (SHRM), phase 1

The laboratory prototype test hardware and testing of the Self-Contained Heat Rejection Module are discussed. The purpose of the test was to provide operational and design experience for application to a flight prototype design. It also provided test evaluation of several of the actual components which were to be used in the flight prototype hardware. Several changes were made in the flight prototype design due to these tests including simpler line routing, relocation of remote operated valves to a position upstream of the expansion valves, and shock mounting of the compressor. The concept of heat rejection control by compressor speed reduction was verified and the liquid receiver, accumulator, remote control valves, oil separator and power source were demonstrated as acceptable. A procedure for mode changes between pumped fluid and vapor compression was developed.

Fleming, M. L.↗
NASA NTRS1986

A unified approach to computer analysis and modeling of spacecraft environmental interactions

A new, coordinated, unified approach to the development of spacecraft plasma interaction models is proposed. The objective is to eliminate the unnecessary duplicative work in order to allow researchers to concentrate on the scientific aspects. By streamlining the developmental process, the interchange between theories and experimentalists is enhanced, and the transfer of technology to the spacecraft engineering community is faster. This approach is called the UNIfied Spacecraft Interaction Model (UNISIM). UNISIM is a coordinated system of software, hardware, and specifications. It is a tool for modeling and analyzing spacecraft interactions. It will be used to design experiments, to interpret results of experiments, and to aid in future spacecraft design. It breaks a Spacecraft Ineraction analysis into several modules. Each module will perform an analysis for some physical process, using phenomenology and algorithms which are well documented and have been subject to review. This system and its characteristics are discussed.

Katz, I.↗
NASA NTRS1990

Integrated topology and shape optimization in structural design

Structural optimization procedures usually start from a given design topology and vary its proportions or boundary shapes to achieve optimality under various constraints. Two different categories of structural optimization are distinguished in the literature, namely sizing and shape optimization. A major restriction in both cases is that the design topology is considered fixed and given. Questions concerning the general layout of a design (such as whether a truss or a solid structure should be used) as well as more detailed topology features (e.g., the number and connectivities of bars in a truss or the number of holes in a solid) have to be resolved by design experience before formulating the structural optimization model. Design quality of an optimized structure still depends strongly on engineering intuition. This article presents a novel approach for initiating formal structural optimization at an earlier stage, where the design topology is rigorously generated in addition to selecting shape and size dimensions. A three-phase design process is discussed: an optimal initial topology is created by a homogenization method as a gray level image, which is then transformed to a realizable design using computer vision techniques; this design is then parameterized and treated in detail by sizing and shape optimization. A fully automated process is described for trusses. Optimization of two dimensional solid structures is also discussed. Several application-oriented examples illustrate the usefulness of the proposed methodology.

Bremicker, M.↗