Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dehydrogenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Gas-phase preparation of the dibenzo[ e,l ]pyrene (C 24 H 14 ) butterfly molecule via a phenyl radical-mediated ring annulation

A high temperature phenyl-mediated addition–cyclization–dehydrogenation mechanism to form peri-fused polycyclic aromatic hydrocarbon (PAH) derivatives—illustrated through the formation of dibenzo[e,l]pyrene (C 24 H 14 )—is explored through a gas-phase reaction of the phenyl radical (C 6 H 5 ˙) with triphenylene (C 18 H 12 ) utilizing photoelectron photoion coincidence spectroscopy (PEPICO) combined with electronic structure calculations. Low-lying vibrational modes of dibenzo[e,l]pyrene exhibit out-of-plane bending and are easily populated in high temperature environments such as combustion flames and circumstellar envelopes of carbon stars, thus stressing dibenzo[e,l]pyrene as a strong target for far-IR astronomical surveys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Tungsten-dioxo single-site heterogeneous catalyst on carbon: synthesis, structure, and catalysis

This study investigates the application of a novel third-row metal, tungsten, to carbon-supported single-site metal-oxo heterogeneous catalysis. Tungsten is a green and earth-abundant metal, but an unexplored candidate in this role. The carbon (AC = activated carbon)-supported tungsten dioxo complex, AC/WO 2 was prepared via grafting of (DME)WO 2 Cl 2 (DME = 1,2-dimethoxyethane) onto high-surface-area activated carbon. AC/WO 2 was fully characterized by ICP-OES, XPS, EXAFS, XANES, SMART-EM, and DFT. W 4d 7/2 XPS and W L III -Edge XANES assign the oxidation state as W(VI), while EXAFS reveals two W=O double and two W–O single bonds at distances of 1.73 and 1.92 Å, respectively. These data align well with DFT computational results, supporting the structure as Carbon(–μ-O–) 2 M(=O) 2 . SMART-EM verifies that single W(VI) catalytic sites are bonded in an out-of-plane manner. The catalytic performance of air- and water-stable AC/WO 2 is compared to that of AC/MoO 2 . AC/WO 2 is more active and selective than the molybdenum analog in mediating alcohol dehydration of various substrates, and is recyclable. Notably, AC/WO 2 is an effective and recyclable catalyst for primary aliphatic alcohol dehydration and forms no dehydrogenation side products in contrast to AC/MoO 2 . However, AC/WO 2 is less effective in epoxidation and PET depolymerization. Overall, this work demonstrates the potential of carbon-supported third row metals for future studies.

02 PETROLEUM↗
DOE OSTI2025

Density functional theory-based surrogate kinetic models for heterogeneous reactions of hydrocarbon intermediates on silicon carbide

The increasing demand for high-performance materials in advanced technologies highlights the importance of achieving a fundamental understanding and potential control of silicon carbide (SiC) deposition processes. However, existing models often lack sufficient theoretical detail, relying heavily on empirical data and offering limited predictive capability. In particular, the complex surface chemistry governing SiC growth remains poorly understood. This study addresses these challenges by employing density functional theory (DFT) to investigate key heterogeneous reactions involving hydrocarbon intermediates on SiC surfaces, including dehydrogenation, hydrogenation, and carbon deposition. Transition state searches were conducted to identify reaction pathways and energy barriers. While first-principles calculations offer high accuracy, they are computationally intensive. To extend the utility of these first-principles results, vibrational analyses were performed using phonon-based statistical thermochemistry to compute temperature-dependent reaction rates which were used to develop Arrhenius-type surrogate kinetic models. Furthermore, the resulting framework provides a more rigorous, physically grounded basis for integrating atomistic insights into continuum-scale modeling, ultimately enabling improved prediction and optimization of SiC film growth in high-performance material systems.

Density Functional Theory↗
DOE OSTI2025

Formation of tungsten ethylidene complexes from diethyl complexes through a proton-catalyzed rearrangement of ethylene

Here, W(NAr) 2 Et 2 (Ar = 2,6-diisopropylphenyl) reacts with two equivalents of R F9 OH (OR F9 = OC(CF 3 ) 3 ) to yield W(NAr)(ArNH 2 )(OR F9 )2(C 2 H 4 ) complexes and ethane. In solution W(NAr)(ArNH 2 )(OR F9 ) 2 (C 2 H 4 ) decomposes to give R F9 OH, ethane, W(NAr)(OR F9 ) 2 (C 2 H 4 ), and W(NAr)(NHAr′)(ArNH 2 )(OR F9 ), in which Ar′ contains a dehydrogenated isopropyl group (Ar′ = (2-i-Pr)(6-CMe=CH 2 )C 6 H 3 ) coordinated to the metal. On a similar time scale W(NAr)(OR F9 ) 2 (CHCH 3 ) complexes are formed from W(NAr)(OR F9 ) 2 (C 2 H 4 ) through an ArNH 2 -catalyzed rearrangement of the ethylene ligand. W(NAr)(NHAr′)(ArNH 2 )(OR F9 ) reacts with cyclohexene to form methylenecyclohexene and complexes that contain an NHAr″ ligand where Ar″ is a disubstituted (methyl/aryl) alkylidene, (2-i-Pr)(6-CMe)C 6 H 3 ) that is tethered to the metal through the amido nitrogen. In contrast to W(NAr)(ArNH 2 )(OR F9 ) 2 (C 2 H 4 ), analogous OR F6 (OCMe(CF 3 ) 2 ) and OR F3 (OCMe 2 (CF 3 )) complexes are relatively stable at 22 °C.

Maji, Milan [University of California, Riverside, ↗
DOE OSTI2020

Morphology and reactivity of size-selected titanium oxide nanoclusters on Au(111)

The morphology and reactivity of mass-selected titania clusters, Ti 3 O 6 and Ti 3 O 5 , deposited onto Au(111) were studied by scanning tunneling microscopy (STM) and temperature programmed desorption (TPD). Despite differing by only one oxygen atom, the stoichiometric Ti 3 O 6 and the sub-stoichiometric (“reduced”) Ti 3 O 5 clusters exhibit very different structures and preferred binding sites. The Ti 3 O 6 clusters preferentially bind at step edges and form small assemblies (2-4 clusters) on Au terraces, while the “reduced” Ti 3 O 5 clusters form much larger fractal-like assemblies that can extend across step boundaries. Annealing the Ti 3 O 5,6 /Au(111) systems to higher temperatures causes changes in the size-distributions of cluster assemblies but does not lead to the formation of TiO x nanoislands for temperatures ≤ 700 K. Reactivity studies show that the reduced Ti 3 O 5 cluster has higher activity than Ti 3 O 6 for 2-propanol dehydration, although both clusters exhibit substantial activity for dehydrogenation to acetone. Calculations using DFT+U suggest that the differences in aggregate morphology and reactivity are associated with the number of undercoordinated Ti 3c sites in the supported clusters.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shock-induced chemistry and high strain-rate viscoelastic behavior of a phenolic polymer

We use impact experiments and a finite element model (up to 1.2 GPa), and molecular dynamics simulations (up to 60 GPa), to examine the behavior of a phenolic polymer under shock compression, spanning both nonreactive and reactive regimes. In the nonreactive regime, relaxation following compression at strain rates of ∼105 s−1 can be explained by viscoelasticity observed at ordinary laboratory rates (≲1 s−1) by accounting for the temperature dependence of the phenolic β-transition. Reasonable agreement is found between the measured shock Hugoniot up to 1.2 GPa and molecular dynamics simulation for cross-linked structures of comparable density. We also observed a first-order mechanical transition near 0.36 GPa shock stress and estimated a spall strength of 0.102 GPa and Hugoniot elastic limit of 1–2 GPa. The shock stress is found to vary up to 24% among phenolics made with different resin and/or cure processes. Finally, molecular dynamics simulations are used to identify a reactive regime at shock pressures ≳20 GPa that is characterized by chemically driven, rate-dependent relaxation processes, including dehydrogenation and dehydration reactions that promote the formation of a dense, highly cross-linked carbonaceous solid and the release of light volatiles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Activation of methane by U + studied by guided ion beam tandem mass spectrometry and quantum chemistry

Reaction pathways of all products formed in the U + + CH 4 (CD 4 ) reaction were explored as a function of kinetic energy using guided ion beam tandem mass spectrometry and quantum chemical calculations. UH + , UC + , UCH + , UCH 2 + , and UCH 3 + (and their perdeuterated analogues) are formed in endothermic reactions. In both systems, the UCH 2 + (UCD 2 + ) dehydrogenated product was the dominant product in the low-energy region, whereas the UH + (UD + ) hydride product became predominant at high energies. The kinetic energy behavior of the various products is consistent with a common intermediate of H–U + –CH 3 (D–U + –CD 3 ). Here, the kinetic energy dependence of all product cross sections was modeled to obtain experimental bond dissociation energies at 0 K (in eV): D 0 (U + –H) = 2.42 ± 0.10, D 0 (U + –C) = 3.95 ± 0.12, D 0 (U + –CH) = 4.91 ± 0.09, D 0 (U + –CH 2 ) = 4.11 ± 0.04, and D 0 (U + –CH 3 ) = 2.41 ± 0.09. Quantum chemical calculations using the UCCSD(T) and UB3LYP approaches with the cc-pwCVXZ-PP basis set with MDF-60 pseudopotential for U + and the aug-cc-pCVXZ and aug-cc-pVXZ (X = T, Q) basis set for carbon and hydrogen, respectively, validate the experimental bond dissociation energies and outline the potential energy surface for all reactions observed. In addition, spin–orbit corrections of the bond energies for all products were calculated at a CASSCF-CASPT2-RASSI level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Hydrogen ejection from hydrocarbons: Characterization and relevance in soot formation and interstellar chemistry

Polycyclic aromatic hydrocarbons (PAHs) play a major role in the chemistry of combustion, pyrolysis, and the interstellar medium. Production (or activation) of radical PAHs and propagation of their resulting reactions require efficient dehydrogenation, but the preferred method of hydrogen loss is not well understood. Unimolecular hydrogen ejection (i.e., direct C─H bond fission) and bimolecular radical abstraction are two main candidate pathways. We performed a computational study to characterize the role of H ejection, particularly as a driver for radical-centric hydrocarbon-growth mechanisms and particle formation. Electronic structure calculations establish that C─H bond strengths span a broad range of energies, which can be weaker than 30 kcal/mol in some C 9 and C 13 PAH radicals. At T > 1200 K, calculated thermal rates for hydrogen ejection from weak C─H bonds at zigzag sites on PAH radicals are significantly larger than typical H-abstraction rates. These results are highly relevant in the context of chain reactions of radical species and soot inception under fuel-rich combustion conditions. Furthermore, calculated microcanonical rates that include the additional internal energy released by bond formation (e.g., ring closure to yield C 9 H 9 ) yield significantly higher rates than those associated with full thermalization. These microcanonical considerations are relevant to the astrochemical processes associated with hydrocarbon growth and processing in the low-density interstellar environment.

08 HYDROGEN↗
DOE OSTI2024

Distinguishing the XUV-induced Coulomb explosion dynamics of iodobenzene using covariance analysis

The primary and secondary fragmentation dynamics of iodobenzene following its ionization at 120 eV were determined using three-dimensional velocity map imaging and covariance analysis. Site-selective iodine 4d ionization was used to populate a range of excited polycationic parent states, which primarily broke apart at the carbon-iodine bond to produce I+ with phenyl or phenyl-like cations (C n H x + or C n H, with n = 1 – 6 and x = 1 – 5). The molecular products were produced with varying degrees of internal excitation and dehydrogenation, leading to stable and unstable outcomes. This further allowed the secondary dynamics of C 6 H x 2+ intermediates to be distinguished using native-frame covariance analysis, which isolated these processes in their own centre-of-mass reference frames. Furthermore, the mass resolution of the imaging mass spectrometer used for these measurements enabled the primary and secondary reaction channels to be specified at the level of individual hydrogen atoms, demonstrating the ability of covariance analysis to comprehensively measure the competing fragmentation channels of aryl cations, including those involving intermediate steps.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Kinetics and selectivity of methane oxidation on an IrO 2 (110) film

Undercoordinated, bridging O-atoms (O br ) are highly active as H-acceptors in alkane dehydrogenation on IrO 2 (110) surfaces but transform to HO br groups that are inactive toward hydrocarbons. The low C–H activity and high stability of the HO br groups cause the kinetics and product selectivity during CH 4 oxidation on IrO 2 (110) to depend sensitively on the availability of O br atoms prior to the onset of product desorption. From temperature programmed reaction spectroscopy (TPRS) and kinetic simulations, we identified two O br -coverage regimes that distinguish the kinetics and product formation during CH 4 oxidation on IrO 2 (110). Under excess O br conditions, when the initial O br coverage is greater than that needed to oxidize all the CH 4 to CO 2 and HO br groups, complete CH 4 oxidation is dominant and produces CO 2 in a single TPRS peak between 450 and 500 K. However, under O br -limited conditions, nearly all the initial O br atoms are deactivated by conversion to HO br or abstracted after only a fraction of the initially adsorbed CH 4 oxidizes to CO 2 and CO below 500 K. Thereafter, some of the excess CH x groups abstract H and desorb as CH 4 above ~500 K while the remainder oxidize to CO 2 and CO at a rate that is controlled by the rate at which Obr atoms are regenerated from HObr during the formation of CH 4 and H 2 O products. We also show that chemisorbed O-atoms ('on-top O') on IrO 2 (110) enhance CO 2 production below 500 K by efficiently abstracting H from Obr atoms and thereby increasing the coverage of O br atoms available to completely oxidize CH x groups at low temperature. Furthermore, our results provide new insights for understanding factors which govern the kinetics and selectivity during CH 4 oxidation on IrO 2 (110) surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Hydroxycinnamaldehyde-derived benzofuran components in lignins

Abstract Lignin is an abundant polymer in plant secondary cell walls. Prototypical lignins derive from the polymerization of monolignols (hydroxycinnamyl alcohols), mainly coniferyl and sinapyl alcohol, via combinatorial radical coupling reactions and primarily via the endwise coupling of a monomer with the phenolic end of the growing polymer. Hydroxycinnamaldehyde units have long been recognized as minor components of lignins. In plants deficient in cinnamyl alcohol dehydrogenase, the last enzyme in the monolignol biosynthesis pathway that reduces hydroxycinnamaldehydes to monolignols, chain-incorporated aldehyde unit levels are elevated. The nature and relative levels of aldehyde components in lignins can be determined from their distinct and dispersed correlations in 2D 1H–13C-correlated nuclear magnetic resonance (NMR) spectra. We recently became aware of aldehyde NMR peaks, well resolved from others, that had been overlooked. NMR of isolated low-molecular-weight oligomers from biomimetic radical coupling reactions involving coniferaldehyde revealed that the correlation peaks belonged to hydroxycinnamaldehyde-derived benzofuran moieties. Coniferaldehyde 8-5-coupling initially produces the expected phenylcoumaran structures, but the derived phenolic radicals undergo preferential disproportionation rather than radical coupling to extend the growing polymer. As a result, the hydroxycinnamaldehyde-derived phenylcoumaran units are difficult to detect in lignins, but the benzofurans are now readily observed by their distinct and dispersed correlations in the aldehyde region of NMR spectra from any lignin or monolignol dehydrogenation polymer. Hydroxycinnamaldehydes that are coupled to coniferaldehyde can be distinguished from those coupled with a generic guaiacyl end-unit. These benzofuran peaks may now be annotated and reported and their structural ramifications further studied.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Thermodynamic Modeling of Complex Solid Solutions in the Lu-H-N System via Graph Neural Network Accelerated Monte Carlo Simulations

Metal hydrides are important across diverse applications, such as hydrogen storage, batteries, gas sensors, nuclear reactions, and high-temperature superconductivity. Previous computational studies of metal hydrides under extreme pressures, e.g., 𝑂⁡(10 2 ) ⁢GPa, usually treat them as stoichiometric compounds without considering interstitial lattice disorder. As pressures become more moderate in the 𝑂⁡(10 0 ) ⁢GPa and below range, hydrogen disorder at interstitial lattice sites becomes prominent, e.g., in the N-doped Lu hydride that was recently claimed superconducting near 1 GPa. Further adding compositional complexity from alloying and/or multielement interstitial occupation makes elucidating pressure- and temperature-dependent observables intractable by first-principles calculations alone. We therefore propose a lattice graph neural-network surrogate modeling approach to predict configuration- and pressure-dependent equation-of-state properties. Their efficiency permits Monte Carlo simulations to calculate Gibbs energies and pressure-dependent phase diagrams, thereby revealing insights into the synthesis conditions required for achieving desired phase equilibria. We demonstrate this concept for the compositionally complex cubic Lu(H,N,Va) 3 system where three constituents (hydrogen, nitrogen and vacancy) have disordered multielement interstitial occupancies and insights into pressure-dependent phase equilibria are critically needed, e.g., N-doping levels can significantly lower dehydrogenation temperatures and provide a new strategy to optimize hydrogen-storage alloys. This work can improve the thermodynamic understanding of the Lu-H-N system and help rational synthesis of N-doped Lu hydrides, but more generally demonstrates an efficient approach to model pressure-dependent thermodynamics of multicomponent solid solutions.

Monte Carlo methods↗
DOE OSTI2023

Biomimetic oxidative copolymerization of hydroxystilbenes and monolignols

Hydroxystilbenes are a class of polyphenolic compounds that behave as lignin monomers participating in radical coupling reactions during the lignification. Here, we report the synthesis and characterization of various artificial copolymers of monolignols and hydroxystilbenes, as well as low-molecular-mass compounds, to obtain the mechanistic insights into their incorporation into the lignin polymer. Integrating the hydroxystilbenes, resveratrol and piceatannol, into monolignol polymerization in vitro, using horseradish peroxidase to generate phenolic radicals, produced synthetic lignins [dehydrogenation polymers (DHPs)]. Copolymerization of hydroxystilbenes with monolignols, especially sinapyl alcohol, by in vitro peroxidases notably improved the reactivity of monolignols and resulted in substantial yields of synthetic lignin polymers. The resulting DHPs were analyzed using two-dimensional NMR and 19 synthesized model compounds to confirm the presence of hydroxystilbene structures in the lignin polymer. The cross-coupled DHPs confirmed both resveratrol and piceatannol as authentic monomers participating in the oxidative radical coupling reactions during polymerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Water-promoted interfacial pathways in methane oxidation to methanol on a CeO 2 -Cu 2 O catalyst

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the pro­motion of this reaction by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from carbon monoxide and carbon dioxide to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to methane and oxygen led to surface methoxy groups and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations, which showed that water preferentially dissociates over the active cerium ions at the CeO 2 –Cu 2 O/Cu(111) interface. The adsorbed hydroxyl species blocked O-O bond cleavage that would dehydrogenate methoxy groups to carbon monoxide and carbon dioxide, and it directly converted this species to methanol, while oxygen reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Overcoming limitations in propanedehydrogenation by codesigning catalyst-membrane systems

Propylene production through propane dehydrogenation (PDH) is endothermic, and high temperatures required to achieve acceptable propane conversions lead to low selectivity and severe carbon-induced deactivation of conventional catalysts. We developed a catalyst-membrane system that removes the hydrogen by-product and can thus achieve propane conversions that exceed equilibrium limits. In this codesigned system, a silica/alumina (SiO 2 /Al 2 O 3 ) hollow-fiber hydrogen membrane was packed with a selective platinum-tin (Pt 1 Sn 1 /SiO 2 ) PDH catalyst on the tube side with hydrogen diffusing from the tube to the shell side. We demonstrate that the catalyst-membrane system can achieve propane conversions >140% of the nominal equilibrium conversion with a propylene selectivity >98% without deactivation of the system components. Here, we also show that by introducing oxygen on the shell side of the catalyst-membrane system, we can couple the endothermic PDH reaction on the tube side with exothermic hydrogen oxidation on the shell side. This coupling results in higher rates of hydrogen transport, leading to further enhancements in the propane conversion as well as desired thermoneutral system operation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Formation of hydrided Pt-Ce-H sites in efficient, selective oxidation catalysts

Single-atom site catalysts can improve the rates and selectivity of many catalytic reactions. For this work, we have modified Pt 1 /CeO 2 single sites by combining them with molecular groups and with oxygen vacancies of the support. The new sites include hydrided (Pt 2+ -Ce 3+ Hδ) and hydroxylated (Pt 2+ -Ce 3+ OH) sites that exhibit higher reactivity and selectivity to previous single sites for several reactions, including a ninefold increase in the reaction rate for carbon monoxide (CO) oxidation, and a 2.3-fold improvement of propylene selectivity for oxidative dehydrogenation of propane. The atomic structure and reaction steps of these sites were determined with in situ and ex situ spectroscopy techniques and theoretical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Synthesis of (oxo)chlorin dimers chelated with thallium(III)

Two target dimers have been prepared for fundamental studies of hole/electron transfer. Metalation with thallium(III) enables clocking of the rate of hole/electron transfer between the two macrocycles. Each dimer contains a diphenylethyne linker joining two identical hydroporphyrins (chlorin or oxochlorin). The linker is substituted at the 4,4′-positions whereas each (oxo)chlorin is joined at the 10-position. Each (oxo)chlorin is equipped with a gem-dimethyl group at the 18-position to stabilize the hydroporphyrin chromophore toward adventitious dehydrogenation and a 3,5-di-tert-butyl group at the 5-position to achieve increased solubilization in organic media. The dimers parallel a prior set of diphenylethyne-linked (oxo)chlorin constructs containing zinc-free base, zinc-zinc, and copper-copper metalation states that have been examined in studies of electronic communication. The building block (oxo)chlorins for preparing the thallium-containing dimers have been prepared in quantities of 32–404 mg, a scale up to 14-fold larger than previously. Thallation of the free base (oxo)chlorin dimers was achieved with excess TlCl 3 ⋅4H 2 O in CH 2 Cl 2 /CH 3 OH (3–4:1) upon overnight reaction at room temperature. The long-wavelength (Q[Formula: see text] absorption band of (oxo)chlorins lies between that of the zinc(II) and free base counterparts. Absorption spectral comparisons are provided of the thallium(III) and free base (oxo)chlorin monomers and dimers.

Chemistry↗