Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Dynamic mechanical properties, thermal and heat resistance of multiblock co-poly(urethane-imide) films with graphene and tungsten disulfide

Organic-inorganic composites filled with nanoscale graphene and tungsten disulfide particles using thermoelastoplastic multiblock co-poly(urethane-imide)s as polymer matrices were obtained. The matrix polymers were the products of the polycondensation of 1,3-bis-(3′,4-dicarboxyphenoxy)benzene dianhydride, 1,4-bis(aminophenoxy)diphenyl sulfone, and two aliphatic polyesters terminated by 2,4-toluene diisocyanate, namely, polypropylene glycol (M{sub n} = 2300) and poly(ethylene adipate) (M{sub n} = 2700). The weight fraction of aromatic segments in samples of co-poly(urethane-imide)s differed by a factor of two. Obtained composites were investigated by TGA, DSC, and DMA methods.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polymer nanoparticles of N-vinylpyrrolidone loaded with an organic aminonitroxyl platinum (IV) complex. Characterization and investigation of their in vitro cytotoxicity

The conditions for obtaining stable aqueous solutions of a lipophilic aminonitroxyl platinum complex, namely, e-amine-d-(4-amino-2,2,6,6-tetramethylpiperidine 1-oxyl)-a, f-bis(octanoato)-b, c-dichloroplatinum(IV), by means of its encapsulation into nanoparticles of copolymers of N-vinylpyrrolidone with triethylene glycol dimethacrylate with various monomer compositions and topologies were found. Aqueous solutions of the complex encapsulated into polymer particles were investigated by dynamic light scattering, the temperature dependence of nanostructure sizes was studied. Transmission electron microscopy established that the hybrid nanostructures are core—shell particles, in which the platinum complex forms small clusters (∼4 nm). The parameters of ESR spectra of aqueous dispersions indicate a high mobility of nitroxyl contained in hybrid nanostructures. Voltammetric measurements demonstrate a similarity of the redox reactions related to the free radical fragment of the aminonitroxyl Pt{sup IV} complex and of the 4-acetylamino-2,2,6,6-tetramethylpiperidine 1-oxyl radical. Polymer products containing the platinum complex were studied by IR spectroscopy, TGA, and DSC. The cytotoxicity index (IC{sub 50}) of the free and the encapsulated complex was determined for HeLa tumor cells. The cytotoxicity of the latter (IC{sub 50} 47–205 nmol L{sup −1}) depends on the monomeric composition of the nanoparticles and the incubation time.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Texture Evolution and Phase Transformation in Titanium Investigated by In-Situ Neutron Diffraction

We report in-situ neutron diffraction studies of texture evolution and the (hcp) (bcc) phase transformation in commercially pure cold-drawn titanium upon continuous heating and cooling, complemented by differential scanning calorimetry (DSC) measurements. We show that the recrystallization of the phase at elevated temperature enhanced the preexisting fiber texture, which eventually facilitated the nucleation and growth of the phase favored by the Burgers orientation relationship, i.e., {0001} //{110} . More strikingly, upon completion of the transformation, the {110} texture (or preferred orientation) in was eliminated immediately by the rapid grain growth of intergranular allotriomorphs. This resulted in the loss of the original -texture when Ti was transformed back to from to upon subsequent cooling, distinct from the known texture memory effect for rolling textures in titanium. Our present work provides useful experimental results for understanding the mechanisms of texture evolution and phase transformation in titanium and its alloys and, by and large, low-symmetry alloys such as zirconium.

36 MATERIALS SCIENCE↗

Dielectric Properties and Oxidation Roasting of Molybdenite Concentrate by Using Microwave Energy at 2.45 GHz Frequency

Conversion of electromagnetic energy into heat depends largely on the dielectric properties of the material being treated. Therefore, determining the dielectric properties of molybdenite concentrate and its microwave power penetration depth in relation to a temperature increment at the commercial frequency of 2.45 GHz is necessary to design industrial microwave processing units. In this study, the dielectric constants increased as the temperature increased in the entire experimental range. The loss factor presented an opposite trend, except for 298 K to 373 K (25 °C to 100 °C) in which a cavity perturbation resonator was used. The plots of nonlinear surface fitting indicate that the increase in dielectric loss causes a considerable decrease in penetration depth, but the dielectric constants exert a small positive effect. The thermogravimetric analysis (TGA-DSC) of the molybdenite concentrate was carried out to track its thermal decomposition process, aim to a dielectric analysis during the microwave heating. MoO{sub 3} was prepared from molybdenite concentrate through oxidation roasting in a microwave heating system and a resistance furnace, respectively. The phase transitions and morphology evolutions during oxidation roasting were characterized through X-ray diffraction and scanning electron microscopy. Results show that microwave thermal technique can produce high-purity molybdenum trioxide.

36 MATERIALS SCIENCE↗

Effect of Cooling Rate on Microsegregation During Solidification of Superalloy INCONEL 718 Under Slow-Cooled Conditions

The solidification sequence, microstructural evolution, solid-liquid interface variation, interdendritic segregation, and elemental distribution of as-cast IN718 alloy at three slow-cooling rates (5, 10, and 20 °C/min) were investigated by differential scanning calorimetry (DSC), confocal laser scanning microscopy (CLSM), optical microscopy (OM), field-emission scanning electron microscopy (FESEM), and electron-probe microanalysis (EPMA) techniques. The results indicate that as the cooling rate decreases, the constitutional supercooling at the solidification front affects the solid-liquid interface more significantly, and the size and quantity of the Laves phase increase. However, the composition of the Laves phase is insensitive to the cooling rate in the range of conditions studied here. In dendrite core, the contents of Ni, Cr, Fe, and Al follow a slight downward trend with an increasing cooling rate, whereas the Nb, Mo, and Ti contents show an upward trend. Additionally, Mo shows a stronger propensity to segregate under slow-cooling conditions because its effective partition coefficient almost linearly decreased with decreasing cooling rate, which is same as Nb. Using the parameters experimentally determined in this study and the Clyne–Kurz equation, we achieved reasonable agreement between the calculated and measured liquid composition change during the solidification process at different cooling rates. All experimental and theoretical programs in this research were undertaken with the aim of gaining further understanding of the microsegregation behaviors in large-scale IN718 ingots, whose cooling rates are within a lower range.

36 MATERIALS SCIENCE↗

Quaternary i-MAX Phases (Mo 2/3 RE 1/3 ) 2 AlC (RE: Dy, Tb, Er): Experimental Characterization and First-Principles Insights into their Fundamental Properties

Rare earth (RE)-based materials have unique electronic, magnetic, and optical properties, leading to the recent discovery of atomically layered solids with the chemical formula (M' 2/3 RE 1/3 ) 2 AlC, which have since garnered significant attention in the scientific community. This study aims to synthesize, characterize, and investigate the structural and thermal stability of the RE i-MAX phases. We prepared i-MAX phases using molybdenum (Mo) as M′ and RE elements as Dy, Tb, and Er, namely (Mo 2/3 Dy 1/3 ) 2 AlC, (Mo 2/3 Tb 1/3 ) 2 AlC, and (Mo 2/3 Er 1/3 ) 2 AlC. Structural characterization through x-ray diffraction (XRD) and Raman spectroscopy confirms the formation of the RE-based i-MAX phase, along with the presence of minor impurity phases in the alloys. Thermogravimetric analysis (TGA) conducted up to 1000°C under ambient conditions reveals that the i-MAX phases remain thermally stable up to approximately 450°C, beyond which oxidation leads to a noticeable weight gain in all samples. Differential scanning calorimetry (DSC) measurements during heating and cooling cycles show endothermic and exothermic peaks for (Mo 2/3 Dy 1/3 ) 2 AlC i-MAX in the 410–420°C range, indicating a temperature-induced minor atomic arrangement. In contrast, these peaks are absent in the Tb- and Er-based i-MAX phases. These findings offer valuable insights into the thermal behavior and stability of these i-MAX phases under thermal stress, contributing to a deeper understanding of their unique properties. Furthermore, first-principles density functional theory (DFT) calculations were performed to investigate the electronic and optical properties of the i-MAX phases. The results reveal their metallic nature, with pronounced contributions from Mo and RE elements near the Fermi level and within the conduction band.

Rare earth↗

Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys

Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using x-ray diffraction (XRD) and scanning electron microscopy coupled with the energy-dispersive spectroscopy (SEM–EDS). Phase transitions of the investigated alloys were measured using differential scanning calorimetry (DSC). Experimentally obtained results were compared with the results of a thermodynamic calculation of the phase equilibria according to the CALPHAD method. The experiments confirmed the optimized thermodynamic parameters for the calculations from the thermodynamic assessment in literature. Phase compositions, liquidus and solidus temperatures were confirmed by the EDS and DTA methods. Additionally, the calculated solidification paths and predicted phase transformations were in agreement with the SEM images.

36 MATERIALS SCIENCE↗

Effect of Sintering Atmosphere on the Synthesis Process, Electrical and Mechanical Properties of NiFe{sub 2}O{sub 4}/Nano-TiN Ceramics

NiFe{sub 2}O{sub 4}/nano-TiN ceramics were fabricated by a two-step cold-pressing sintering process. Effect of sintering atmosphere (air, nitrogen, argon) on the synthesis process of NiFe{sub 2}O{sub 4}/nano-TiN ceramics was investigated. The DSC-TG and XRD analysis results indicated that besides principal phases of NiO and NiFe{sub 2}O{sub 4}, new-phase Ni{sub 3}TiO{sub 5} formed in the sintered ceramics under the three sintering atmospheres, and metallic phase including iron and nickel appeared in the sintered samples with inert gas (nitrogen, argon) sintering condition. Microstructure analysis results showed that considerable quantity of micropores appeared in the ceramic samples sintered under inert gases (argon, nitrogen), but lower porosity (3.0, 3.6%) and higher densities (4.78 g/cm{sup 3}, 4.51 g/cm{sup 3}) can be obtained, comparing to the both values (14.4%, 4.17 g/cm{sup 3}) for the ceramic samples sintered under air atmosphere. Besides, the average bending strength and elastic modulus of the samples sintered under argon is 113.75 MPa and 7.13GPa, which is higher than that of 75.12 MPa, 5.42GPa and 91.96 MPa, 6.26GPa for the samples synthesized under air and nitrogen, separately. When changing sintering atmosphere from air to inert gases (argon, nitrogen), the fracture model of the 4 wt.%nano-TiN/NiFe{sub 2}O{sub 4} ceramics synthesized at 1400 °C for 4 h transformed from intergranular fracture to intergranular-transgranular fracture.

36 MATERIALS SCIENCE↗

Glass-Forming Ability, Thermal Stability, and Hardness of Rapidly Solidified Al-Ni-Y-Sc Alloy Ribbons and Rods

The crystallization behaviors and thermal stability of (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 100−x}Sc{sub x} (x = 0, 1.0, 1.5) amorphous ribbons and alloy rods, produced by roller melt-spinning method and inductance casting, were investigated mainly by x-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The glass transition temperatures of the (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 99.0}Sc{sub 1.0} and (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 98.5}Sc{sub 1.5} alloy ribbons were found to be 201 and 197 °C, respectively. Furthermore, the melting temperatures of the alloy ribbons decreased with the Sc content. This revealed that the glass-forming ability (GFA) of the metallic glass increased with increasing Sc content. Crystallization of (Al{sub 87}Y{sub 8}Ni{sub 5}){sub 100−x}Sc{sub x} (x = 0, 1.0, 1.5) amorphous ribbons occurred in the temperature range of 200 to 400 °C in three exothermic reaction stages. The peak temperatures of these three crystallization reactions shifted to higher temperatures at higher heating rates. The kinetic parameters for the first crystallization reaction, determined by Kissinger method, revealed that adding 1.5 at.% Sc increased the activation energy for crystallization from 158 to 167 kJ/mol. On the other hand, the cross-section morphology of the three different alloys revealed that a fully amorphous outer region and a partially crystallized core region formed in each alloy rod. It was also found that the thickness of the amorphous region increased with the Sc content, revealing a positive effect of Sc on the GFA.

36 MATERIALS SCIENCE↗

Morphological Evolution of Mg-Al-La-Ca Alloy Induced by a Mechanical Stirring Process

This paper aims to evaluate the morphological evolution of a magnesium-aluminum alloy (Mg-6Al-3La-1Ca) processed by a mechanical stirring process (MSP) with different stirring times. An apparatus for semisolid metal alloy processing was used to melt and obtain rheocast material. Transformation temperatures were determined at a slow cooling rate using computer-aided cooling curve thermal analysis (CA-CCTA) and differential scanning calorimetry (DSC). Isothermal mechanical stirring (605 °C), at 950 rpm, was carried out with a solid fraction of 0.29 and stirring times of 0, 1, 2, 4, 8 and 10 min, followed by fast cooling in water. The results showed that the microstructure after conventional casting (0 min—no stirring) is composed of an α-Mg dendritic matrix, Al{sub 11}La{sub 3}, (Al,Mg){sub 2}Ca and Mg{sub 2}Ca compounds. With the 1-min stirring time, it was not possible to obtain globular structures. For stirring times longer than 2 min, a primary α-Mg globular morphology was obtained. Microstructures with 2 min of stirring time showed better globularization than those obtained under the other conditions. Morphological changes were observed for Al{sub 11}La{sub 3} and (Al,Mg){sub 2}Ca after the MSP followed by fast cooling.

36 MATERIALS SCIENCE↗

Microstructural and Mechanical Characterization of Directionally Solidified Conventional and Nb-Modified Mar-M247 Superalloy

This study analyzes the effects of replacing Ta by Nb (at.% basis) in the phase transformation temperatures, Scheil solidification behavior, and microstructural mechanical features of a Nb-modified as well as conventional Mar-M247 superalloys. Both alloys were directionally solidified at a withdrawal rate of 18 cm/h under a thermal gradient of about 80 °C/cm. DSC results were compared to thermodynamic simulations of phase transformation temperatures and showed a good correlation. The replacement of Ta by Nb has not altered the solidification path of Mar-M247, keeping the sequence L → L + γ → L + γ + MC → L + γ + MC + γ/γ′ eutectic. Due to the segregation of Hf and Zr to the very last liquid to solidify, a low melting point γ/Ni{sub 5}(Hf,Zr) constituent was observed. The as-solidified microstructures of both Mar-M247(Nb) and Mar-M247 were constituted of columnar dendrites of gamma matrix (γ) phase with cuboidal gamma-prime (γ′) precipitates. In addition, γ/γ′-eutectic was observed in the interdendritic region along with MC carbides in blocky, script (blocky dendritic), needle-like and fine nodular morphologies. Both alloys contained about 1.5 vol.% of MC carbides. The MC carbides in Mar-M247(Nb) and Mar-M247 are, respectively, Nb-rich and Ta-rich, with only a limited amount of Hf being detected in the MC phase. The yield stress of Nb-modified Mar-M247 showed higher values up to 750 °C. For higher temperatures, above 800 °C, a conventional Mar-M247 presented a higher value of yield stress.

36 MATERIALS SCIENCE↗

Effects of Heat Input on Weld-Bead Geometry, Surface Chemical Composition, Corrosion Behavior and Thermal Properties of Fiber Laser-Welded Nitinol Shape Memory Alloy

Bead-on-plate laser welding was carried out on 1-mm-thick Nitinol sheets at different heat input values. The variations in weld-bead geometry and variations in microstructures across the bead were studied. The effects of heat input on surface layer composition of the welded samples, corrosion properties and phase transformation temperature were examined. From x-ray photoelectron spectroscopy (XPS), it was clear that relative intensity of elemental Ni peak was higher in parent material and the oxidation state of Ti was Ti{sup 4+}. It was further observed from Auger electron spectroscopy (AES) that the Ti to Ni ratio on the top surface of the welded samples was more than 1, and as a result of this the stability of TiO{sub 2} layer was enhanced, which eventually helped to improve the corrosion property of the welded samples. The polarization resistance of the welded samples was increased by more than ten times compared to that of the un-welded samples. From differential scanning calorimetry (DSC), it became evident that phase transformation temperatures got changed due to welding.

36 MATERIALS SCIENCE↗

The Effect of Multistage Aging on Mechanical Properties and Microstructure of Forged 7050 Aluminum Alloys

A new four-stage aging treatment, which is composed of pre-aging, retrogression, natural aging (NA) and re-aging, is designed to increase the tensile properties and the fatigue life of forged 7050 aluminum alloy in this work. As compared to traditional T74 and RRA treatments, the four-stage aging-treated sample exhibits the highest tensile properties and ductility. The tensile strength and yield strength are 627 and 608 MPa, respectively, and the elongation is 11.3%. The results of TEM and DSC show that an increased G.P zones and fine η′ phase distributed in the matrix of the alloy are subjected by this new aging processing as compared with T74 and RRA treatments. The natural aging in four-stage aging treatment accelerates the diffusion of Mg vacancies, and promotes the precipitation of G.P zones in grain interior during re-aging stage. On the basis of dislocation shearing mechanism, more dense and fine G.P zones of four-stage aging temper result in the superior tensile strength as compared to T74 and RRA temper. In addition, a combination of shearable precipitates, fine GBPs and narrow PFZs is beneficial to the slip reversibility in the plastic zone at the crack tip, thereby reducing fatigue damage accumulation and increasing the fatigue life.

36 MATERIALS SCIENCE↗

Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification

Epoxy resin composites filled with pristine and organomodified fly ash were prepared and examined. The fly ash used is CaO-rich due to the origin of lignite from the northern Greece area and the power plants in Kozani. As matrix, the epoxy system with curing agent triethylenetetramine was used. A combination of mechanical stirring and ultrasonication was used for highly dispersed fly ash composites. SEM, FTIR spectroscopy and XRD measurements were used to study dispersion homogeneity, structure, degree of aggregation/agglomeration and interface formation of the matrix with the fly ash particles. The properties E′, E″ and relaxations α-(T{sub g}) and β-(Τ{sub β}) of the composites were assessed by DMA. Also, DSC and TGA measurements were used to characterize the thermal properties. Interesting results concerning the effect of the surface organomodification of fly ash on the network formation and the thermomechanical properties of the composites were derived. XRD and FTIR measurements reveal that the functional groups present on the surface of fly ash particles play a dominated role to interface formation. DMA results show that the fly ash surface modification affects the thermodynamic properties of the composites. Additionally, there is evidence showing that the short-scale β-relaxation is also affected by the fly ash surface organomodification.

36 MATERIALS SCIENCE↗

Effect of Eutectic Characteristics on Hot Tearing of Cast Superalloys

The occurrence of hot cracks in the blades of Ni-based superalloy turbocharger wheels is thought to be closely related to eutectic characteristics. Different alloys that are susceptible to hot tearing, namely K418, K419 and K424, were studied. SEM was used to obtain the microstructure of the alloys. DSC, isothermal solidification quenching process and EPMA were conducted to determine the relationship between the eutectic characteristics and solidification process, segregation behavior and dendrite coalescence. The results show that a large volume fraction of γ/γ′ eutectic indicates a wide-temperature solidification range and severe segregation. A large γ/γ′ eutectic size is a result of element segregation and poor dendrite coalescence. Ti is thought to promote the formation of a large isolated residual liquid pool and lead to a large eutectic size, leading to the poor coalescence behavior of the dendrites. The volume fraction and size of the γ/γ′ eutectic were considered, and a eutectic influence factor (E) was defined to evaluate the effect of eutectic characteristics on hot tearing in cast superalloys. It was found that a high E corresponds to high hot-tearing susceptibility.

36 MATERIALS SCIENCE↗

A Study on the Microstructures and Properties of Selective Laser Melted Babbitt Metals

Babbitt metal cubes were prepared by means of selected laser melting (SLM) process using Sn—11% Sb—6% Cu alloy powders; their microstructures were studied using optical microscope (OM), SEM, EDS, XRD and DSC; and their mechanical properties were tested using Vickers hardness and tensile methods. The results show that fully dense Babbitt metal components can be prepared by using appropriate SLM process parameters and an interlayer staggered laser scanning strategy. Anisotropy characteristics appear in both the microstructure and mechanical properties of SLM-Babbitt cubic specimens. The average hardness was in the range of 32.5 HV0.05 to 35.3 HV0.05. Both tensile strength and elongation were somewhat higher in a direction parallel to the laser scanning speed (Y axis) than in a direction perpendicular to the laser scanning speed (X axis). The strengthening mechanism is suggested to include solid solution strengthening of oversaturated Sb in the Sn matrix, as well as dispersion strengthening of finely dispersed SnSb and Cu{sub 6}Sn{sub 5} particles. The overgrown acicular Cu{sub 6}Sn{sub 5} phases at low laser scanning speeds and void formation at higher laser scanning speeds seriously deteriorate the mechanical properties of the SLM-Babbitt specimens.

36 MATERIALS SCIENCE↗

Removal of Fat Components in High TDS Leather Wastewater by Saline-Tolerant Lipase-Assisted Nanoporous-Activated Carbon

The present investigation was carried out for the degradation of fatty components in high TDS containing wastewater (soak liquor) discharged from leather industry, and the degradation was achieved by saline-tolerant lipase-immobilized functionalized nanoporous-activated carbon (STLNPAC). The lipase was extracted from the halophilic organism, Bacillus cereus. The optimum conditions for lipase production such as time, 60 h; temperature, 50 °C; pH, 10; and substrate concentration, 2.5% (w/v) were determined through response surface methodology (RSM). The functionalization of NPAC was done by ethylenediamine/glutaraldehyde covalent interaction technique followed by the immobilization of saline-tolerant lipase onto FNPAC. The functional properties of STLNPAC were analyzed through instrumentation techniques such as TGA-DSC, FT-IR, XRD, and SEM images. The lipid content of soak liquor was removed by > 99% at HRT of 60 min using STLNPAC-packed bed reactor. The efficiency was evaluated by using UV-visible and FT-IR spectroscopic analyses. The degradation of lipids was best obeyed by pseudo first-order rate kinetics, and the rate constant was found to be 1.6 × 10{sup −3} min{sup −1}. The biodegradability index of soak liquor was increased from 0.322 to 0.426, highly favorable for the complete removal of organic components in subsequent operations.

60 APPLIED LIFE SCIENCES↗

Chloro-Modified Magnetic Fe{sub 3}O{sub 4}@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity, Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe{sub 3}O{sub 4} magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe{sub 3}O{sub 4}@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe{sub 3}O{sub 4}@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V{sub max} and a similar K{sub m} compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe{sub 3}O{sub 4}@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.

60 APPLIED LIFE SCIENCES↗