Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

On the physical nature of apokampic discharge

Experimental and theoretical investigations of a diffuse jet (streamer) of apokampic discharge are carried out for various values of air pressure. It is established experimentally that this regime of pulse-periodic discharge is formed stage by stage. At the first stage, in a microsecond discharge of a voltage pulse of positive polarity, a potential spark channel formed during the first pulses between two needle electrodes is transformed into a diffuse channel. At the second stage, a weakly glowing halo is formed near the discharge channel, and a bright offshoot arises near the bending point. Finally, at the third stage of discharge in the steadystate mode, for frequencies of a few to tens of kilohertz in each pulse, the offshoot becomes a source of plasma bullets (streamers) moving with a velocity of up to 200 km/s. As a result of simulation of a streamer in atmospheric pressure air under conditions corresponding to the experimental data, a propagation velocity of up to 400 km/s is obtained for the streamer. It is shown that the formation of a jet significantly depends on the air temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

From an electron avalanche to the lightning discharge

The goal of this work is to describe qualitatively the physics of processes which begin with an electron avalanche and finish in a lightning discharge. A streamer model is considered that is based on studies of the recently discovered processes occurring in the prestreamer region. The investigation and analysis of these processes enabled making the conclusion that they are, in essence, the attendant processes, which ensure the electron avalanche-to-streamer transition, and may be interpreted as a manifestation of properties of a double charge layer exposed to the external electric field. The pressing problems of physical processes which form a lightning discharge are considered from the standpoint of new ideas about the mechanism of the streamer formation and growth. Causes of the emergence of coherent super-high-frequency radiation of a leader and the neutron production in a lightning discharge are revealed that have not been explained so far in the theory of gas discharge. Based also on new ideas about the lightning discharge, a simple ball-lightning model, providing answers to almost allquestions formulated from numerous observations on the behavior of ball lightning, is offered, and the need of a new design of lightning protection instead of the traditional rod is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of a DC gas discharge with a copper cathode in a water flow

A dc gas discharge between copper electrodes in the current range of 5–20 А was studied experimentally. The discharge gap length was varied within 45–70 mm. The cathode was a 10-mm-diameter rod placed in the water flowing out from a dielectric tube. Three discharge configurations differing in the position of the cathode upper end with respect to the water surface were considered: (i) above water; (ii) flush with the water surface, and (iii) under water. The electric and optical characteristics of the discharge in the second configuration were studied in more detail. It is established that the discharge properties are similar to those of an electric arc. Considerable cathode erosion was observed in the third configuration. It is revealed that fine-dispersed copper grains form in the course of erosion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ecton processes in the generation of pulsed runaway electron beams in a gas discharge

As was shown earlier for pulsed discharges that occur in electric fields rising with extremely high rates (10{sup 18} V/(cm s)) during the pulse rise time, the electron current in a vacuum discharge is lower than the current of runaway electrons in an atmospheric air discharge in a 1-cm-long gap. In this paper, this is explained by that the field emission current from cathode microprotrusions in a gas discharge is enhanced due to gas ionization. This hastens the initiation of explosive electron emission, which occurs within 10{sup –11} s at a current density of up to 10{sup 10} A/cm{sup 2}. Thereafter, a first-type cathode spot starts forming. The temperature of the cathode spot decreases due to heat conduction, and the explosive emission current ceases. Thus, the runaway electron current pulse is similar in nature to the ecton phenomenon in a vacuum discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of a Nitrogen Admixture on the Anomalous Memory Effect in the Breakdown of Low-Pressure Argon in a Long Discharge Tube

The memory effect (the dependence of the dynamic breakdown voltage U{sub b} on the time interval τ between voltage pulses) in pulse-periodic discharges in pure argon and the Ar + 1%N{sub 2} mixture was studied experimentally. The discharge was ignited in a 2.8-cm-diameter tube with an interelectrode distance of 75 cm. The measurements were performed at gas pressures of P = 1, 2, and 5 Torr and discharge currents in a steady stage of the discharge of I = 20 and 56 mA. Breakdown was produced by applying positive-polarity voltage pulses, the time interval between pulses being in the range of τ = 0.5–40 ms. In this range of τ values, a local maximum (the anomalous memory effect) was observed in the dependence U{sub b}(τ). It is shown that addition of nitrogen to argon substantially narrows the range of τ values at which this effect takes place. To analyze the measurement results, the plasma parameters in a steady-state discharge (in both pure argon and the Ar + 1%N{sub 2} mixture) and its afterglow were calculated for the given experimental conditions. Analysis of the experimental data shows that the influence of the nitrogen admixture on the shape of the dependence U{sub b}(τ) is, to a large extent, caused by the change in the decay rate of the argon afterglow plasma in the presence of a nitrogen admixture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Experimental Study of a Vacuum Spark Discharge over a Dielectric Surface

A decrease in the amplitude of the current of a vacuum spark discharge over a dielectric surface with increasing discharge gap length is established. It is shown that, in the presence of a longitudinal magnetic field, the leading edge of the discharge voltage pulse is extended, whereas the clearly pronounced current pulse transforms into a train of alternating current oscillations. The discharge is found to decelerate when the spark is preceded by a low-current discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of Discharge in a Saline Solution at Near-Threshold Voltages

The development of a discharge in a point−plane gap filled with a saline solution with a salt content of 3% was studied experimentally. The duration of the voltage pulse applied to the gap was about 2 ms. Data are presented on the formation dynamics of gas microcavities at near-threshold voltages at which gas-discharge plasma appears in some microcavities. The cavities are conglomerates of microbubbles with a typical size of ≈100 μm. At the threshold voltage (≈750 V), the active electrode is covered with a gas layer and the gap voltage is in fact applied to this layer, which leads to the development of discharges in individual microbubbles. In this case, the discharge operates in the form of short current pulses. The number of microcavities filled with plasma increases as the voltage grows above the threshold value. At the plasma boundary, new microbubbles are formed, in which discharges are ignited. As a result, the plasma front propagates from the active electrode into the gap with a characteristic velocity of 10{sup 3} cm/s.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of pulsed magnetron discharge in high-current electron guns

High-speed video filming is applied to investigate low-pressure (argon 0.053–0.133 Pa) pulsed gas discharge dynamics in a planar magnetron built-in the explosive emission cathode of a high-current electron gun. It has been found that, in the beginning, the discharge starts at the side surface of the cathode and then spreads to its face. The stability of the discharge ignition instant at the cathode face as a function of the working pressure of the gas and the cathode design has been studied. It has been found that the pulsed longitudinal magnetic field results in the discharge switching over in the axial direction onto the electron gun collector. A qualitative explanation of the observed discharge behavior has been given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isothermal Microcalorimetry Analysis of Li/ β -MnO 2 Discharge

Despite widespread use over several decades, the lithium/manganese dioxide (Li/MnO 2 ) discharge mechanism is not completely understood owing to the structural complexity of the material. However, an improved understanding could lead to broader adoption as a primary and even secondary cathode material. Here, we examine the discharge of single-phaseβ-MnO 2 using isothermal microcalorimetry for the first time. Equilibrium voltage and entropy changes are characterized over the entire discharge range and used to rationalize the results. These measurements are supplemented by electrochemical impedance and X-ray diffraction data that give the clearest picture of theβ-MnO 2 lithiation process to date. We find that the first half of discharge is dominated by a two-phase reaction to form Li 0.5 MnO 2 followed by single-phase insertion to a composition of Li 1.0 MnO 2 , which confirms prior first-principles calculations. The tetragonalβ-MnO 2 lattice undergoes asymmetric expansion from Jahn-Teller distorted Mn 3+ to form an orthorhombic LiMnO 2 phase which retains the 1 × 1 tunnel structure. Microcalorimetry results suggest the presence of parasitic reactions occurring during the second half of discharge, which could arise from decomposition of electrolyte or release and reaction of residual water retained in the structure.

Electrochemistry↗

Shorting at Long Duration: Impact of Extended Discharge Capacity on Battery Solid Electrolytes

Long-duration energy storage (LDES) is critical to a stable, resilient, and decarbonized electric grid. While batteries are emerging as important LDES devices, extended, high-power discharges necessary for cost-competitive LDES present new materials challenges. Here, focusing on a new generation of low-temperature molten sodium batteries, we explore here unique phenomena related to long-duration discharge through a well-known solid electrolyte, NaSICON. Specifically, molten sodium symmetric cells at 110°C were cycled at 0.1 A cm -2 for 1-23 h discharges. Longer discharges led to unstable overpotentials, reduced resistances, and decreased electrolyte strength, caused by massive sodium penetration not observed in shorter duration discharges. Scanning electron microscopy informed mechanisms of sodium penetration and even “healing” during shorter-duration cycling. Importantly, these findings show that traditional, low-capacity, shorter-duration tests may not sufficiently inform fundamental materials phenomena that will impact LDES battery performance. This case highlights the importance that candidate LDES batteries be tested under pertinent long-duration conditions.

25 ENERGY STORAGE↗

Computational Analysis of Anode and Cathode Structuring Effects on Charge and Discharge in Graphite|LiNi 0.6 Mn 0.2 Co 0.2 O 2 Batteries

Structured electrodes (SEs) improve the rate capability of Lithium-ion batteries by engineering micrometer-scale electrolyte regions into the electrode, promoting rapid ionic transport. Prior research has focused on structuring one electrode (anode or cathode) with an analysis on either the charge or discharge performance. We present a holistic study using three-dimensional models to investigate the isolated effects of structuring either electrode and the combined effects of structuring both electrodes on the charge and discharge capacity of single-layer cells at 4 C and 6 C. Volumetric and gravimetric discharge energy density (Wh/L stack and Wh/kg stack ) and charge capacity (Ah/kg stack and Ah/L stack ) are evaluated for multi-layer pouch cell stacks. Pairing SE anodes with SE cathodes demonstrated improvements up to 15% in discharge Wh/kg stack and up to 33% in charge Ah/kg stack over a conventional cell; Energy required to charge per Ah/kg stack was improved by 13%–14%. SE cathodes paired with a conventional anode exhibited improvements of 0.3%–22% across all performance metrics evaluated. Conversely, pairing a SE anode with a conventional cathode demonstrated improved charge capacity up to 13% but showed a 2%–23% lower discharge energy density. The importance of aligning SEs in a cell from a performance and manufacturing perspective is also analyzed.

25 ENERGY STORAGE↗

Predicting Postoperative Injury and Military Discharge Status After Knee Surgery in the US Army

Background: Researchers have assessed postoperative injury or disability predictors in the military setting but typically focused on 1 type of surgical procedure at a time, used relatively small sample sizes, or investigated mixed cohorts with civilian populations. Purpose: To identify the relationship between baseline variables and injury incidence or military discharge status in US Army soldiers after knee surgery. Study Design: Case-control study; Level of evidence, 3. Methods: Data were obtained from a repository containing personnel, performance, and medical records for all active-duty US Army soldiers. Multivariate logistic regressions were used to estimate the effects of numerous variables on postoperative injury or on medical discharge. Variable selection and model validation were conducted using the k-fold method. Results: A total of 7567 soldiers underwent knee surgery between 2017 and 2019. Meniscal procedures were the most common type of surgery (39%), and approximately 71% of the cohort had a postoperative injury. Significant predictors for sustaining a postoperative injury included having a previous nonknee injury (odds ratio [OR], 1.5), female sex (OR, 1.3), and Black race (OR, 1.2). Within 4 years after surgery, 17% of soldiers were discharged from the military because of knee-related disability. Significant predictors for discharge from duty included enlisted rank (OR, 2.3), recent fitness test failure (OR, 1.9), number of previous knee surgeries (OR, 1.7), and having a previous nonknee injury (OR, 1.6). Conclusion: After knee surgery, nearly three-fourths of the soldiers in this cohort sustained a postoperative injury and almost one-fifth of soldiers were medically discharged from the military within 4 years. This study identified variables that indicate statistically increased risk for these postoperative outcomes and highlighted potentially modifiable factors.

Orthopedics↗

Quantifying the Behavioral Response of Spawning Chum Salmon to Elevated Discharges from Bonneville Dam, Columbia River : Annual Report 2005-2006.

In unimpounded rivers, Pacific salmon (Oncorhynchus spp.) typically spawn under relatively stable stream flows, with exceptions occurring during periodic precipitation events. In contrast, hydroelectric development has often resulted in an artificial hydrograph characterized by rapid changes in discharge and tailwater elevation that occur on a daily, or even an hourly basis, due to power generation (Cushman 1985; Moog 1993). Consequently, populations of Pacific salmon that are known to spawn in main-stem habitats below hydroelectric dams face the risks of changing habitat suitability, potential redd dewatering, and uncertain spawning success (Hamilton and Buell 1976; Chapman et al. 1986; Dauble et al. 1999; Garland et al. 2003; Connor and Pflug 2004; McMichael et al. 2005). Although the direct effects of a variable hydrograph, such as redd dewatering are apparent, specific effects on spawning behavior remain largely unexplored. Chum salmon (O. keta) that spawn below Bonneville Dam on the Columbia River are particularly vulnerable to the effects of water level fluctuations. Although chum salmon generally spawn in smaller tributaries (Johnson et al. 1997), many fish spawn in main-stem habitats below Bonneville Dam near Ives Island (Tomaro et al. 2007; Figure 1). The primary spawning area near Ives Island is shallow and sensitive to changes in water level caused by hydroelectric power generation at Bonneville Dam. In the past, fluctuating water levels have dewatered redds and changed the amount of available spawning habitat (Garland et al. 2003). To minimize these effects, fishery managers attempt to maintain a stable tailwater elevation at Bonneville Dam of 3.5 m (above mean sea level) during spawning, which ensures adequate water is provided to the primary chum salmon spawning area below the mouth of Hamilton Creek (Figure 1). Given the uncertainty of winter precipitation and water supply, this strategy has been effective at restricting spawning to a specific riverbed elevation and providing minimum spawning flows that have the greatest chance of being maintained through egg incubation and fry emergence. However, managing the lower Columbia River for a stable tailwater elevation does not provide much operational flexibility at Bonneville Dam, which has little storage capacity. When river discharges increase due to rain events, the traditional approach has been to pass excess water at night to maintain stable tailwater elevations during the daytime. The underlying assumption of this strategy, referred to as reverse load following, is that fish do not spawn at night. However, Tiffan et al. (2005) showed that this assumption is false by documenting nighttime spawning by chum salmon in the Ives Island area. Similarly, McMichael et al. (2005) reported nighttime spawning by Chinook salmon (O. tshawytscha) in the Columbia River, indicating that diel spawning may be a common occurrence in Pacific salmon. During the latter portion of the chum spawning period in December 2003 and 2004, discharges from Bonneville Dam increased from an average of 3,398 m3/s (tailwater elevation {approx} 3.5 m above mean sea level) during the day to over 5,664 m3/s (tailwater elevation {approx} 5.1 m) at night, with peak discharges of 7,080 m{sup 3}/s (tailwater elevation {approx} 6.1 m). This caused concern among fishery managers regarding the potential effects of these high discharges on this population of spawning chum salmon, which is listed under the Endangered Species Act (National Oceanic and Atmospheric Administration 1999). We hypothesized that increased water velocities associated with elevated tailwaters might alter chum salmon spawning behavior if water velocities at redd locations increased beyond the range of suitability (>0.8 m/s; Salo 1991). In 2005, we investigated the movement and behavioral responses of spawning chum salmon at Ives Island to increased tailwater elevations at Bonneville Dam. We used acoustic telemetry to determine if the higher velocities associated with increased tailwater elevations caused fish to leave their redds. We related the duration fish were away from redds and the distances moved to water velocities estimated from a two-dimensional hydrodynamic model. Finally, we described specific changes in spawning behavior (e.g., nest digging; swimming activity) during elevated-tailwater tests using a dual-frequency identification sonar (DIDSON).

13 HYDRO ENERGY↗

Solute Transport and Transformation in an Intermittent, Headwater Mountain Stream with Diurnal Discharge Fluctuations

Time-variable discharge is known to control both transport and transformation of solutes in the river corridor. Still, few studies consider the interactions of transport and transformation together. Here, we consider how diurnal discharge fluctuations in an intermittent, headwater stream control reach-scale solute transport and transformation as measured with conservative and reactive tracers during a period of no precipitation. One common conceptual model is that extended contact times with hyporheic zones during low discharge conditions allows for increased transformation of reactive solutes. Instead, we found tracer timescales within the reach were related to discharge, described by a single discharge-variable StorAge Selection function. We found that Resazurin to Resorufin (Raz-to-Rru) transformation is static in time, and apparent differences in reactive tracer were due to interactions with different ages of storage, not with time-variable reactivity. Overall we found reactivity was highest in youngest storage locations, with minimal Raz-to-Rru conversion in waters older than about 20 h of storage in our study reach. Therefore, not all storage in the study reach has the same potential biogeochemical function and increasing residence time of solute storage does not necessarily increase reaction potential of that solute, contrary to prevailing expectations.

54 ENVIRONMENTAL SCIENCES↗

Concentration-Discharge Relationships in the Six Largest Arctic Rivers, 2003-2019

This dataset provides the results of the analysis of the relationship of dissolved analyte concentrations and river discharges in the six largest Arctic rivers across the global panarctic region (see Figure 1 in documentation file *.pdf). Long-term measurements of dissolved analyte concentrations and river discharge have been collected for each of the Kolyma, Lena, Mackenzie, Ob, Yenisey, and Yukon rivers by the Arctic Great Rivers Observatory (ArcticGRO) project from ~2003-present (Shiklomanov, 2021). The relationship of dissolved analyte concentrations and discharges in each river was characterized by statistical analysis of the slope of the log(concentration) vs log(discharge) (b), the coefficient of variation ratio (CVc/CVq), the 2.5% and 97.5% confidence intervals of b, and assigning a chemostatic, flushing, diluting, or non-systematic behavior category according to Koger (2018). The summary of these analyses for all six rivers is provided in one .csv file. The concentrations of 20 dissolved analytes and discharge measurement data for the individual Kolyma, Lena, Mackenzie, Ob, Yenisey, and Yukon rivers are also provided with this dataset. There are seven *.csv files; one for each river plus the statistical summary. These public ArcticGRO data at "https://www.arcticgreatrivers.org" (Shiklomanov, 2021) were downloaded on Feb 13, 2020, but each river has different measurement dates over the sampling and analysis period. The ArcticGRO metadata document (*.pdf) downloaded on Feb 13, 2020 is also included in this dataset. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗

Anomalous transport in the H-mode pedestal of Alcator C-Mod discharges

Anomalous transport in the H-mode pedestal region of five Alcator C-Mod discharges, representing a collisionality scan is analyzed. The understanding of anomalous transport in the pedestal region is important for the development of a comprehensive model for the H-mode pedestal slope. In this research, a possible role of the drift resistive inertial ballooning modes (Rafiq et al 2010 Phys. Plasmas 17 082511) in the edge of Alcator C-Mod discharges is analyzed. The stability analysis, carried out using the TRANSP code, indicates that the DRIBM modes are strongly unstable in Alcator C-Mod discharges with large electron collisionality. An improved interpretive analysis of H-mode pedestal experimental data is carried out utilizing the additive flux minimization technique (Pankin et al 2013 Phys. Plasmas 20 102501) together with the guiding-center neoclassical kinetic XGC0 code. The neoclassical and neutral physics are simulated in the XGC0 code and the anomalous fluxes are computed using the additive flux minimization technique. The anomalous fluxes are reconstructed and compared with each other for the collisionality scan Alcator C-Mod discharges. It is found that the electron thermal anomalous diffusivities at the pedestal top increase with the electron collisionality. This dependence can also point to the drift resistive inertial ballooning modes as the modes that drive the anomalous transport in the plasma edge of highly collisional discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Supersonic CO electric-discharge lasers

Laser modeling activity is described which involved addition of an option allowing N2 as a second diatomic gas. This option is now operational and a few test cases involving N2/CO mixtures were run. Results from these initial test cases are summarized. In the laboratory, a CW double-discharge test facility was constructed and tested. Features include: water-cooled removable electrodes, O-ring construction to facilitate cleaning and design modifications, increased discharge length, and addition of a post-discharge observation section. Preliminary tests with this facility using N2 yielded higher power loadings than obtained in the first-generation facility. Another test-section modification, recently made and as yet untested, will permit injection of secondary gases into the cathode boundary layer. The objective will be to vary and enhance the UV emission spectrum from the auxiliary discharge, thereby influencing the level of photoionization in the main discharge region.

Hason, R. K.↗

Electric-discharge-pumped nitrogen ion laser

The routine operation is described of an N2(+) laser oscillating on the first negative band system of N2(+) which is produced in a preionized transverse discharge device. The discharge design incorporates features which favor the efficient production of the excitation transfer reaction of He2(+) with N2. A capacitive discharge switched by means of a high-current grounded grid thyratron is used to meet the design requirement of a volumetric discharge in high-pressure gas mixtures where the electric discharge need not have an ultrafast rise time (greater than 10 nsec) but should be capable of transferring large quantities of stored electric energy to the gas. A peak power of 180 kW in an 8-nsec laser pulse was obtained with a 0.1% mixture of N2 in helium at a total pressure of 3 atm. The most intense laser oscillations were observed on the (0,1) vibrational transition at 427.8 microns.

Laudenslager, J. B.↗