Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Current stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Representing cropping systems with the MEMS 2 ecosystem model

Abstract Croplands have been the focus of substantial investigation due to their considerable potential for sequestering carbon. Understanding the potential for soil organic carbon (SOC) sequestration and necessary management strategies will be enabled with accurate process‐based models. Accurately representing crop growth and agricultural practices will be critical for realistic SOC modeling. The MEMS 2 model incorporates a current understanding of SOC formation and stabilization, measurable SOC pools, and deep SOC dynamics and is seen as a highly promising tool to inform management intervention for SOC sequestration. Thus far, MEMS 2 has been developed to represent grasslands. In this study, we further developed MEMS 2 to model annual grain crops and common agricultural practices, such as irrigation, fertilization, harvesting, and tillage. Using four Ameriflux sites, we demonstrated an accurate simulation of crop growth and development. Model performance was strong for simulating aboveground biomass (index of agreement [d] range of 0.89–0.98) and green leaf area index (dfrom 0.90 to 0.96) across corn, soybean, and winter wheat. Good agreement with observations was also achieved for net ecosystem CO 2 exchange (dfrom 0.90 to 0.96), evapotranspiration (dfrom 0.91 to 0.94), and soil temperature (dof 0.96), while discrepancy with the available soil water content data remain (dfrom 0.14 to 0.81 at four depths to 100 cm). While we will continue model testing and improvement, MEMS 2 (version 2.14) has now demonstrated its ability to effectively simulate the growth of common grain crops and practices.

Agriculture↗

Novel structured Sm 0.5 Sr 0.5 CoO 3-δ cathode for intermediate and low temperature solid oxide fuel cells

The performance of solid oxide fuel cell (SOFC) can be significantly enhanced using nanostructured cathode obtained by infiltration/impregnation method. However, this method has been limited due to multi-step preparation process and instability of the obtained nanoscale catalyst under long-term operation. We report here a simple, cost-effective and reproducible approach to fabricate nanostructured Sm 0.5 Sr 0.5 CoO 3-δ (SSC) cathode with enhanced performance and stability. The SSC powders were prepared by a freeze-drying method through a combustion route using Pluronic F-127 as the template. The SSC freeze-drying powders have unique morphology and a significant phase change at 750 °C. The oxygen non-stoichiometry (δ) of the SSC powders is 0.18 at room temperature, while the δ values are 0.66, 0.75 and 0.90 at 600 °C, 700 °C and 800 °C, respectively. The novel structured SSC cathode was prepared by screen-printing and one-step sintering process using the freeze-drying SSC powders. Maximum cell power densities of 0.83 and 1.13 W cm -2 are achieved at 550 °C and 600 °C, respectively for single cells with the novel structured SSC cathode. Moreover, single cells show excellent stability at 600 °C under a current density of 600 mA cm -2 over 250 h. This work expands opportunities to exploit nanotechnology in a wide range of intermediate and low temperature energy conversion devices.

25 ENERGY STORAGE↗

Interface stability of LiCl-rich argyrodite Li 6 PS 5 Cl with propylene carbonate boosts high-performance lithium batteries

In solid-state lithium (Li)-metal batteries (SSLMBs), sulfide-based Li-ion conductors represent one of the most popular solid electrolytes (SEs). However, the development of sulfide-based SSLMBs is significantly hampered by interfacial issues including large solid-solid contact resistance and serious side reactions at the SE/electrode interface. To address these issues, here, we demonstrated a simple and efficient strategy by using LiCl-rich argyrodite Li 6 PS 5 Cl (Li 6 PS 5 Cl-LiCl) SE and trace amount of propylene carbonate (PC) at the SE/electrode interface to facilitate the formation of stable and robust solid electrolyte interphase (SEI). Additionally, the formed SEI not only serves as a buffer layer to passivate the interfacial reactions and suppress Li dendrite growth, but also acts as a bridge for Li-ion conduction to reduce the contact resistance. As a result, the Li||Li symmetric cell exhibited long-term electrochemical cycling stability over 1000 h at a current density of 0.2 mA cm -2 . Furthermore, the assembled Li||Li 4 Ti 5 O 12 (LTO) batteries delivered a specific capacity of 175 mAh g–1 at 0.2 C, and remained an excellent specific capacity of 116 mAh g –1 after 200 cycles at a high current rate of 1 C. These features indicate a feasible strategy to enhance the interfacial property of high-performance SSLMBs.

25 ENERGY STORAGE↗

Wide-Area Measurement-Based Modal Decoupling for Power System Oscillation Damping

Inter-area oscillation modes usually fall within the same frequency range of 0.1 to 1.0 Hz; thus, power oscillation damping (POD) control methods should avoid unnecessary excitation of weakly damped modes. This paper presents a decoupled control strategy to damp inter-area oscillations in the power grid. Pure oscillation mode signals are extracted from wide-area measurements and used as feedback input for POD actuators such as power system stabilizers or high-voltage direct current transmission. The decoupled control strategy is able to increase the damping of the concerned oscillation modes without deteriorating others. This proposed strategy could be implemented independently, or serve as a complement and work along with conventional POD controllers to damp concerned inter-area modes. The proposed method has been tested on a modied MinniWECC system. Extensive results indicate that inter-area oscillations can be successfully and precisely damped using the proposed decoupled strategy.

Fan, Rui↗

Microphase Separation of Randomly Linked Branched Polystyrene/Polylactic Acid for Formation of Cocontinuous Nanostructures

Cocontinuous polymeric nanomaterials have gained attention for their ability to preserve distinct properties of constituent microphases within a single material. Randomly linked copolymer networks have shown very wide stability windows for disordered cocontinuous phases (extending over ≈ 30 wt % in composition), but the reliance on a network architecture prevents subsequent solution- or melt-processing. Furthermore, the key factors contributing to cocontinuity have remained unclear. We recently found that randomly linked star copolymers (RSCs) can exhibit a cocontinuous window as wide as 25 wt % in the case of 4-arm stars, suggesting that while a network architecture is not essential for the formation of disordered cocontinuous phases, the presence of random elastic forces in such architectures may indeed facilitate their formation. In addition, the behavior was found to be highly sensitive to arm number, with 6-arm RSCs exhibiting almost no cocontinuous phase. These results raised a key mechanistic question regarding the contribution of random elastic forces, originating from strands that bridge between junctions, in stabilizing disordered cocontinuous phases. In the current study, we synthesized randomly linked branched copolymers (RBCs) of polystyrene (PS) and poly(D,L-lactic acid) (PLA), which represent an intermediate architecture between networks and stars. This approach allows for the introduction of elastic contributions from strands bridging between different junctions, while still maintaining the processability advantages of a non-network architecture. The cocontinuous regions of the PS/PLA RBCs, with varying polymer and linker functionalities (f p and f l , respectively), were characterized by small-angle X-ray scattering, gravimetry, and scanning electron microscopy. We found that the cocontinuous windows of RBCs typically expanded with increasing elastic contributions and exhibited reduced sensitivity to junction-functionality compared to RSCs. Notably, RBCs with f p = 1.50 and f l = 3, which had large molecular weights due to proximity to the gel point, achieved a cocontinuous window of ≈ 34 wt %, which is almost twice as wide as analogous 3-arm RSCs and comparable to randomly linked networks. Leveraging this robust cocontinuity and solution-processability, we fabricated a film of interconnected nanoporous PS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pinned Electrode/Electrolyte Interphase and Its Formation Origin for Sulfurized Polyacrylonitrile Cathode in Stable Lithium Batteries

Sulfurized polyacrylonitrile (SPAN) represents one of the most promising directions for high-energy-density lithium (Li)-sulfur batteries. However, the practical application of Li||SPAN is currently limited by the insufficient chemical/electrochemical stability of electrode/electrolyte interphase (EEI). Here, a pinned EEI layer is designed for stabilizing a SPAN cathode by regulating the EEI formation mechanism in an advanced LiFSI/ether/fluorinated-ether electrolyte. Computational simulations and experimental investigations reveal that, benefiting from the nonsolvating nature, the fluorinated-ether can not only act as a protective shield to prevent the Li polysulfides dissolution but also, more importantly, endow a diffusion-controlled EEI formation process. It promotes the formation of a uniform, protective, and conductive EEI layer pinning into SPAN surface region, enabling the high loading Li||SPAN batteries with superior cycling stability, wide temperature performance, and high-rate capability. Finally, this design strategy opens an avenue for exploring advanced electrolytes for Li||SPAN batteries and guides the interface design for broad types of battery systems.

25 ENERGY STORAGE↗

Global hotspots of particulate organic carbon losses under climate change

Soil organic carbon (SOC) comprises particulate (POC) and mineral-associated organic carbon (MAOC), which differ in formation, stabilization, and loss mechanisms. While the current global distribution of POC and MAOC is characterized, their vulnerability under future climate scenarios remains unclear. Using 3284 topsoil (0-30 cm) observations from six continents, we identify high-latitude soils as global hotspots of SOC vulnerability under shared socioeconomic pathway scenarios (SSP126, SSP245, and SSP585). Under a high-emission scenario (SSP585), high-latitude soils are projected to lose substantial POC by 2100, accounting for about 81 ± 10% of total SOC losses. These declines are driven by the high proportion of SOC stored as POC (f POC ) and its high temperature sensitivity. We show that f POC is a robust indicator of SOC vulnerability to climate change. Globally, the projected POC decline corresponds to a cumulative carbon dioxide (CO 2 ) release of 81.34 Pg CO 2 -equivalent by 2100, highlighting the importance of preserving POC to mitigate climate feedbacks.

54 ENVIRONMENTAL SCIENCES↗

Electrically driven amplified spontaneous emission from colloidal quantum dots

Colloidal quantum dots (QDs) are attractive materials for realizing solution-processable laser diodes that could benefit from size-controlled emission wavelengths, low optical-gain thresholds and ease of integration with photonic and electronic circuits. However, the implementation of such devices has been hampered by fast Auger recombination of gain-active multicarrier states, poor stability of QD films at high current densities and the difficulty to obtain net optical gain in a complex device stack wherein a thin electroluminescent QD layer is combined with optically lossy charge-conducting layers. Here we resolve these challenges and achieve amplified spontaneous emission (ASE) from electrically pumped colloidal QDs. The developed devices use compact, continuously graded QDs with suppressed Auger recombination incorporated into a pulsed, high-current-density charge-injection structure supplemented by a low-loss photonic waveguide. These colloidal QD ASE diodes exhibit strong, broadband optical gain and demonstrate bright edge emission with instantaneous power of up to 170 μW.

36 MATERIALS SCIENCE↗

Atomic-scale modeling of the dissolution of oxidized platinum nanoparticles in an explicit water environment

Pt nanoparticles (NPs) are currently being investigated for use in fuel cells; however, Pt NP oxidation as a function of size, morphology, and temperature is not well understood or currently quantified. In this study, the stability and dissolution of oxidized platinum NPs is examined via classical molecular dynamics in an explicit water environment. The NPs considered range in size from 1.35 to 2.92 nm in diameter and included five different monolayer (ML) coverages of O*. The simulations were performed at 300, 450, and 600 K with the many-body, reactive third-generation charge-optimized many-body or COMB3 potentials and examine the kinetics of NP dissolution in water. The Pt–O layer, which reduces the kinetic activity for Pt atom dissolution, is projected to make dissolution more favorable for O* MLs smaller than 0.5. The simulations further indicate that the Pt NPs' kinetic rates of dissolution are slowed by an increase in the number of adsorbed species caused by the dissociation of water molecules at the reconstructed facets of the Pt NPs. Furthermore, these findings quantify the effect of oxygen and temperature on the stability and dissolution of oxidized platinum NP in an explicit water environment similar to the conditions in fuel cells and electrocatalysis.

08 HYDROGEN↗

Models of resistive wall tearing mode disruptions

Disruptions are a serious issue in tokamaks. In a disruption, the thermal energy is lost by means of an instability which could be a resistive wall tearing mode (RWTM). During precursors to a disruption, the plasma edge region cools, causing the current to contract. Model sequences of contracted current equilibria are given, and their stability is calculated. A linear stability study shows that there is a maximum value of edge q a ≈ 3 for RWTMs to occur. Further, this also implies a minimum rational surface radius normalized to plasma radius from RWTMs to be unstable. Nonlinear simulations are performed using a similar model sequence derived from an equilibrium reconstruction. There is a striking difference in the results, depending on whether the wall is ideal or resistive. With an ideal wall, the perturbations saturate at moderate amplitude, causing a minor disruption without a thermal quench. With a resistive wall, there is a major disruption with a thermal quench, if the edge q a ≤ 3. There is a sharp transition in nonlinear behavior at q a = 3. This is consistent with the linear model and with experiments. If disruptions are caused by RWTMs, then devices with highly conducting walls, such as the International Tokamak Experimental Reactor will experience much milder, tolerable, disruptions than presently predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal renormalization of multiscale systems

While model order reduction is a promising approach in dealing with multi-scale time-dependent systems that are too large or too expensive to simulate for long times, the resulting reduced order models can suffer from instabilities. We have recently developed a time-dependent renormalization approach to stabilize such reduced models. In the current work, we extend this framework by introducing a parameter that controls the time-decay of the memory of such models and optimally selecting this parameter based on limited fully resolved simulations. First, we demonstrate our framework on the inviscid Burgers equation whose solution develops a finite-time singularity. Our renormalized reduced order models are stable and accurate for long times while using for their calibration only data from a full order simulation before the occurrence of the singularity. Furthermore, we apply this framework to the 3D Euler equations of incompressible fluid flow, where the problem of finite-time singularity formation is still open and where brute force simulation is only feasible for short times. Our approach allows us to obtain for the first time a perturbatively renormalizable model which is stable for long times and includes all the complex effects present in the 3D Euler dynamics. We find that, in each application, the renormalization coefficients display algebraic decay with increasing resolution, and that the parameter which controls the time-decay of the memory is problem-dependent.

Price, Jacob↗

Comparison of MHD stability properties between QH-mode and ELMy H-mode plasmas by considering plasma rotation and ion diamagnetic drift effects

Magnetohydrodynamic (MHD) stability at tokamak edge pedestal in a quiescent H-mode (QH-mode) and type-I ELMy H-mode plasmas in DIII-D experiment was analyzed by considering plasma rotation and ion diamagnetic drift effects. QH-mode plasma is marginally stable to kink/peeling mode (K/PM), but ELMy H-mode one is almost unstable to peeling-ballooning mode (PBM). It was identified that there are three physics features responsible for the difference in the MHD stability properties between QH-mode plasma and ELMy H-mode one. These are the distance of pedestal foot from the last closed flux surface (LCFS), the amount of the ion diamagnetic drift frequency at pedestal, and impact of coupled rotation and ion diamagnetic drift effects. These features were confirmed through the numerical experiments that the stability properties of the QH-mode plasma can be changed to that of the ELMy H-mode one by shifting the plasma profiles inward in the radial direction and halving the ion diamagnetic drift frequency. The reasons of the change in the stability properties are thought as that K/PM is stabilized due to the inward shift of the bootstrap current profile, and PBM is destabilized due to the reduction of the coupled rotation and ion diamagnetic drift stabilizing effect. Importance of these features was validated through numerical experiments with experimental data of other QH-mode plasmas in DIII-D. All the results show that MHD stability properties of QH-mode plasma can be obtained in case that pedestal foot is close to LCFS, ion diamagnetic drift frequency is large due to high ion temperature, and strong rotation shear exists near pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of Pressure Distribution and Magnitude on the Performance of Lithium Metal Anodes

Li metal anodes are a critical battery technology due to their ability to substantially increase the energy density of Li-based batteries. It is well known that pressure greatly impacts the performance of a Li-metal anode. However, precisely how the pressure value and distribution of pressure affect performance is unclear. Furthermore, the solid-electrolyte interphase composition that forms under varying pressure distributions remains a key parameter for practical lithium metal anodes. In this work, different pressure distributions were employed by using differently shaped and oriented mechanical springs in the coin cells, resulting in varying contact points. Pressure-sensitive films were used to spatially map the pressure and correlate it to the performance. It was found that higher average pressure does not necessarily have a positive effect on performance. When high pressure is paired with poor pressure uniformity, the performance is in fact worse likely due to the current focusing effect, rendering unsatisfied cycling stability. This work points to the importance of controlling the relationship between average pressure and pressure uniformity.

25 ENERGY STORAGE↗

Analysis Background & Noise in Stretched Wire Alignment Technique Measurements

The Stretched-Wire Alignment Technique (SWAT) is one method of magnet alignment for linear induction accelerators. The applications of SWAT have been implemented for aligning solenoid magnets on the Scorpius linear induction accelerator which will be sited at the Nevada National Security Site and the Flash X-Ray (FXR) linear induction accelerator at Lawrence Livermore National Laboratory’s Contained Firing Facility. This article describes both systematic (repeatable) and random sources of background and noise as well as practical ways to eliminate or reduce them to acceptable levels. Systematic sources include reflections from wire ends, rapid sag due to ohmic heating of the wire, magnetic materials, and shot rate. Random sources include air currents, vibration of nearby equipment, mechanical stability of test equipment, and the instruments used to measure the wire motion. Mitigations include curve fitting and adaptive noise signal cancellation, and mechanical damping. Finite Element Analysis (FEA) was used to identify and resolve a repeatable wire vibration frequency interfering with the signal resolution. Two stretched wire alignment technique set ups from Sandia National Labs and Lawrence Livermore National Lab have shown background noise sources and ways of mitigating them by either analysis methods or change of mechanical configuration. Conclusions that were drawn included the severe sensitivity of the deflection to even small external interferences of the SWAT wire such that it requires attention to detail in mechanical set up and analysis.

Linear Inductive Accelerator↗

Measurement of stability diagrams in the IOTA ring at Fermilab

Nonlinear focusing elements can enhance the stability of particle beams in high-energy colliders through Landau Damping, by means of the tune spread which is introduced. Here we discuss an experiment at Fermilab's Integrable Optics Test Accelerator (IOTA) which investigates the influence of nonlinear focusing elements, such as octupoles, on the beam’s transverse stability. In this experiment, we employ an anti-damper, an active transverse feedback system, as a controlled mechanism to induce coherent beam instability. By utilizing the anti-damper we can examine the impact of a nonlinear focusing element on the beam's transverse stability. The stability diagram, a tool used to determine the system's stability, is measured using a recently demonstrated method at the LHC. The experiment at IOTA adds insight towards this stability diagram measurement method by supplying a reduced machine impedance to investigate the machine impedance’s effect on the stability diagram, as well as by aiming to map out the full stability diagram by using a large phase range of the anti-damper. From this experiment in IOTA, we present the first results of stability diagram analysis with varying octupole currents.

43 PARTICLE ACCELERATORS↗

Molecule Origins of Dipolar Character in Excited Electronic States

The molecular level origins for symmetry breaking in the excited state of symmetrical quadrupolar molecules, particularly in polar solvents, was investigated using time-dependent density functional theory approaches. Molecules of the form ADA (A/D electron accepting/donating respectively), have been shown to break their symmetry upon excitation, producing an intramolecular charge transfer event and permanent dipole. Current research indicates that polar solvents stabilize the charge transfer event thereby producing asymmetrical solvent dynamics on opposite ends of the molecules. In this work key structural features of the molecule were identified including (1) incorporation of cyano groups, (2) rotation of grafted phenyl rings, and (3) the length of the conjugated R group chain. More specifically, incorporation of cyano groups appears to decrease the magnitude of the dipole in the excited state, thereby indicating that solvent interactions at these groups do not stabilize the charge transfer. While the rotation of the phenyl groups appears to be necessary to break the symmetry of the excited state in the molecule.

36 MATERIALS SCIENCE↗

Physics-Based Real-time Analysis and Control to Achieve Transient-Free Operations for the ITER Era (Final Report)

This is the final report for the early career award for Prof. Egemen Kolemen that aimed to develop the physics and technical basis of real-time transient – i.e. disruptions and Edge Localized Modes (ELMs) – avoidance and feedback control at the DIII-D nuclear fusion facility for the ITER era. During this project, we reconstructed high quality real-time DIII-D equilibria using kinetic information from the motional Stark effect (MSE), Thomson Scattering (TS), and Charge Exchange Recombination (CER) spectroscopy. These equilibria were analyzed in real-time to determine the low-n ideal MHD stability and the pedestal stability thresholds, and to obtain plasma response models. These calculations were used to understand which physical process evolves to lead to the onset of disruption in ITER-relevant scenarios at DIII-D, and how disruption can be predicted using stability analysis as opposed to the current methods of correlation of various signals, which are descriptive but lack predictive power. In the disruption studies, we focused on tearing modes, since these constitute the vast majority of disruptions in this regime. With this knowledge, real-time disruption avoidance algorithms were developed and tested. The enhanced situation awareness and physics insight were used in advanced real-time feedback control of pedestal and core profiles, which allowed the pursuit and sustainment of transient-free high-confinement regimes that cannot be achieved via feed-forward design based on in-between shot analysis.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Product selectivity and mass transport in levulinic acid transfer hydrogenation by monolithic MIL-100, MIL-88B and ZIF-8@Pd MOFs

The diffusion processes between adsorbent and adsorbate naturally play a significant role in the efficiency and selectivity of the heterogenous catalytic process. This paper considers the importance of diffusion processes in the transfer hydrogenation reaction of levulinic acid to γ-valerolactone by MIL-88B, MIL-100, and ZIF8@Pd monolithic catalysts. Over a period of five catalytic cycles, it was shown that the Fe-based catalysts can achieve similar conversions to the ZIF-8 supported Pd, with the only current limitation being the lower aqueous stability of these MOFs. Diffusion constants were calculated using the ZLC method, with micropore diffusion limitation found for ZIF-8 and MIL-100 monolithic frameworks at 2.7 x 10 -8 and 4.6 x 10 -8 cm 2 s -1 respectively. This diffusion limitation was also confirmed by IR spectroscopy with an increasing concentration of C—H bands on the MOF substrate post-reaction. Mass transfer coefficients, also calculated by ZLC, revealed increased mass transport for the hydrophobic ZIF-8 framework, which perhaps aids in the γ-valerolactone selectivity over side products that are produced in the absence of catalytic material, as seen for MIL-88B and MIL-100 after multiple uses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗