Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross Flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

The role of Ekman flow and planetary waves in the oceanic cross-equatorial heat transport

A numerical model is used to mechanistically simulate the oceans' seasonal cross-equatorial heat transport. The basic process of Ekman pumping and drift is able to account for a large amount of the cross-equatorial flux. Increased easterly wind stress in the winter hemisphere causes Ekman surface drift poleward, while decreased easterly stress allows a reduction in the poleward drift in the summer hemisphere. The addition of planetary and gravity waves to this model does not alter the net cross-equatorial flow, although the planetary waves are clearly seen. On comparison with Oort and Vonder Haar (1976), this adiabatic advective redistribution of heat is seen to be plausible up to 10-20 deg N, beyond which other dynamics and thermodynamics are indicated.

Schopf, P. S.↗
NASA NTRS1977

Flow study in the cross sectional planes of a turbine scroll

A numerical study of the nonviscous flow characteristics in the cross-sectional planes of a radial inflow turbine scroll is presented. The velocity potential is used in the formulation to determine the flow velocity in these planes resulting from the continuous mass discharge. The effect of the through flow velocity is simulated by a continuous distribution of source/sink in the cross-section. A special iterative procedure is devised to handle the solution of the resulting Poisson's differential equation with Neumann boundary conditions in a domain with generally curved boundaries. The analysis is used to determine the effects of the radius of curvature, the location of the scroll section and its geometry on the flow characteristics in the turbine scroll.

Hamed, A.↗
NASA NTRS1987

The calibration and operation of a constant-temperature crossed-wire probe in supersonic flow

The calibration and operation of a constant-temperature crossed-wire probe in supersonic flow is considered. Crossed-wire probes offer considerable advantages over single, inclined wires: the kinematic shear stress can be derived from a single point measurement; the rms quantities can be derived from the same measurement, and the instantaneous quantities can be obtained as a continuous function of time. However, using a crossed-wire probe in supersonic flow is subject to the following practical difficulties: the problem of flow interference, where the shock waves from one wire and its supports interfere with the flow over the other wire; the necessity for high frequency response to resolve the spectral content, and the sensitivity of the results to small changes in the calibration constants. In the present contribution, each of these problems is addressed. Practical solutions are suggested, and some encouraging results are presented.

Fernando, E. M.↗
NASA NTRS1985

A method for determining acoustic-liner admittance in ducts with sheared flow in two-cross-sectional directions

A method is developed for determining the acoustic admittance of a test liner installed in the wall of a grazing flow impedance tube. The mean flow is permitted flow gradients in both cross-sectional directions of the tube. The unknown admittance value is obtained by solving an eigenvalue problem. This eigenvalue problem results from the application of the finite-element method to the partial differential equation and boundary conditions governing the acoustic field. The credibility of the method is established by comparing results with exact solutions obtained for a constant mean-flow profile and with previous results for cases involving shear in only one cross-sectional direction. Excellent comparisons are obtained in both cases. The analysis is used in conjunction with a limited amount of experimental data and shows that the flow must be accurately modeled in order to determine the acoustic-liner properties.

Watson, W. R.↗
NASA NTRS1973

Swirling flows in streamtubes of variable cross section.

The behavior of vortex flow at high swirls is investigated. The problem was first formulated in the method of weighted residuals, using Bessel functions as approximating functions. Convergent solutions require a large number of steps in the axial direction and do not seem to offer an advantage over traditional methods. As the results do not differ substantially from those of the zeroth approximation (the solution for 'cylindrical' flow), this approximation is then explored and discussed in more detail. It is used to derive a relationship predicting a critical radius for which stagnation on the axis (vortex breakdown) can be expected for a given swirl. Flow patterns with open and closed vortex bubbles are explored. At high swirls, even minute variations in outer streamtube radius have profound effects on the flow. Vortex breakdown bubbles in divergences, tubes, and free flows can be explained.

Bossel, H. H.↗
NASA NTRS2016

Comparison of Cross Correlation and Optical Flow Methods for Processing Retroreflective and Natural Background BOS Data

Background oriented schlieren images have historically been generated by calculating the observed pixel displacement between an image pair using normalized cross-correlation methods. This work uses optical flow data reduction methods to solve the displacement fields. A well established method used in the computer vision community, optical flow is the apparent brightness motion in an image sequence. The regularization method of Horn and Schunck is used to create schlieren images using two data sets: a supersonic shockjet plume interaction at the NASA Ames Unitary Plan Wind Tunnel, and a transonic flight test of a T-38 using a naturally occurring background performed in conjunction with NASA Ames and Armstrong research centers. Results are presented and contrasted with those using normalized cross-correlation methods. The optical flow images are found to provided significantly more detail at a decreased computational time.

schlieren↗
NASA NTRS1983

Flow visualization studies of bodies with square cross sections

A water-tunnel study was conducted of four bodies. A solution of sodium fluorescein coating the body provided visualization of vortices and feeding sheets and isolated dots of methyl blue dye provided visualization of stream lines. These data, along with published oil-flow photos, were analyzed to develop the topological representation of the flows in cross-flow planes. Presented are the development of the flow along the body at fixed angles of attack and at a fixed body station with changes in angle of attack. Effects of roll angle, body corner radius, and nose bluntness are illustrated.

Chapman, G. T.↗
NASA NTRS1994

Cross-effects in microgravity flows

In microgravity materials growth (i.e., crystal growth via vapor deposition) experiments, it is of interest ot understand and control the flows that arise from the molecular rather than the mere continuum nature of the gases and the vapors. The project research is a theoretical and experimental investigation of the flow of gas/vapor mixtures in realistic geometries and environments, as well as the application of new fundamental understandings to simulating flows in the ampoules. Towards this goal, the research tasks are: to obtain a theoretical description of the flow by solving appropriate kinetics equations; to verify the results by acquiring experimental data in a diffusion cell; and to explore applications of the results above to simulations of flows in the ampoules. The paper provides a description of the cross-phenomena and the progress realized to-date by the project personnel.

Loyalka, Sudarshan K.↗
NASA NTRS1972

Calculation of linearized supersonic flow over slender cones of arbitrary cross section

Supersonic linearized conical-flow theory is used to determine the flow over slender pointed cones having horizontal and vertical planes of symmetry. The geometry of the cone cross sections and surface velocities are expanded in Fourier series. The symmetry condition permits the uncoupling of lifting and nonlifting solutions. The present method reduces to Ward's theory for flow over a cone of elliptic cross section. Results are also presented for other shapes. Results by this method diverge for cross-sectional shapes where the maximum thickness is large compared with the minimum thickness. However, even for these slender-body shapes, lower order solutions are good approximations to the complete solution.

Mascitti, V. R.↗
NASA NTRS1989

CFD simulation of square cross-section, contoured nozzle flows - Comparison with data

Computational analyses have been made of the flow in NASA Langley's Arc-Heated Scramjet Test Facility's Mach 4.7 and Mach 6 square cross-section contoured nozzles, for comparison with experimental results. The analyses, which were performed using a three-dimensional RANS computer code assuming a single species gas with constant specific heats, were intended to provide insight into the nature of the flow development in this type of nozzle. The computational results showed the exit flow distribution to be affected by counter-rotating vortices along the centerline of each nozzle sidewall. Calculated flow properties show general, but not complete, agreement with experimental measurements in both nozzles.

Ostrander, Mark J.↗
NASA NTRS2015

Secondary Instability of Stationary Crossflow Vortices in Mach 6 Boundary Layer Over a Circular Cone

Hypersonic boundary layer flows over a circular cone at moderate incidence can support strong crossflow instability. Due to more efficient excitation of stationary crossflow vortices by surface roughness, such boundary layer flows may transition to turbulence via rapid amplification of the high-frequency secondary instabilities of finite amplitude stationary crossflow vortices. The amplification characteristics of these secondary instabilities are investigated for crossflow vortices generated by an azimuthally periodic array of roughness elements over a 7-degree half-angle circular cone in a Mach 6 free stream. Depending on the local amplitude of the stationary crossflow mode, the most unstable secondary disturbances either originate from the second (i.e., Mack) mode instabilities of the unperturbed boundary layer or correspond to genuine secondary instabilities that reduce to stable disturbances at sufficiently small amplitudes of the stationary crossflow vortex. The predicted frequencies of dominant secondary disturbances are similar to those measured during wind tunnel experiments at Purdue University and the Technical University of Braunschweig, Germany.

Boundary layer flow↗
NASA NTRSDate not supplied

Parametric Study of Federated Conflict Resolution for UAM Operations

This work presents a federated conflict resolution algorithm and its parametric study for UAM operations. A federated speed-control-based conflict resolution algorithm is introduced first, including its rules of the road, data exchange requirement, and critical parameters. Two experiments were set up for the parametric study. The first investigates five parameters: look ahead time, resolution update interval, maximum allowed speed reduction, traffic flow interval, and crossing angle. The second experiment studies the uncertainty of departure time. Metrics associated with safety, efficiency, and conflict resolution effort were measured for each scenario. A Design Of Experiment (DOE) analysis was used to perform the multi-factor analysis for the first experiment. It revealed that the crossing angle and flow interval were the most critical parameters across all three metrics, followed by maximum allowed speed reduction. Look ahead time and resolution update interval were of minor significance to safety and conflict resolution effort, but had little to no effect on efficiency. The analysis of the second experiment showed that, given a flow rate, the fluctuation in departure time was absorbed by the conflict resolution algorithm, which resulted in a relatively small fluctuation in airborne delay.

Urban air mobility↗
NASA NTRSDate not supplied

Parametric Study of Federated Conflict Resolution for UAM Operations using DOE Analysis

This work presents a federated conflict resolution algorithm and its parametric study for UAM operations. A federated speed-control-based conflict resolution algorithm is introduced first, including its rules of the road, data exchange requirement, and critical parameters. Two experiments were set up for the parametric study. The first investigates five parameters: look ahead time, resolution update interval, maximum allowed speed reduction, traffic flow interval, and crossing angle. The second experiment studies the uncertainty of departure time. Metrics associated with safety, efficiency, and conflict resolution effort were measured for each scenario. A Design Of Experiment (DOE) analysis was used to perform the multi-factor analysis for the first experiment. It revealed that the crossing angle and flow interval were the most critical parameters across all three metrics, followed by maximum allowed speed reduction. Look ahead time and resolution update interval were of minor significance to safety and conflict resolution effort, but had little to no effect on efficiency. The analysis of the second experiment showed that, given a flow rate, the fluctuation in departure time was absorbed by the conflict resolution algorithm, which resulted in a relatively small fluctuation in airborne delay.

Urban air mobility↗
NASA NTRS2003

Mixing and NO(x) Emission Calculations of Confined Reacting Jet Flows in a Cylindrical Duct

Rapid mixing of cold lateral jets with hot cross-stream flows in confined configurations is of practical interest in gas turbine combustors as it strongly affects combustor exit temperature quality, and gaseous emissions in for example rich-lean combustion. It is therefore important to further improve our fundamental understanding of the important processes of dilution jet mixing especially when the injected jet mass flow rate exceeds that of the cross-stream. The results reported in this report describe some of the main flow characteristics which develop in the mixing process in a cylindrical duct. A 3-dimensional tool has been used to predict the mixing flow field characteristics and NOx emission in a quench section of an RQL combustor, Eighteen configurations have been analyzed in a circular geometry in a fully reacting environment simulating the operating condition of an actual RQL gas turbine combustion liner. The evaluation matrix was constructed by varying three parameters: 1) jet-to-mainstream momentum-flux ratio (J), 2) orifice shape or orifice aspect ratio, and 3) slot slant angle. The results indicate that the mixing flow field significantly varies with the value of the jet penetration and subsequently, slanting elongated slots generally improve the mixing uniformity at high J conditions. Round orifices produce more uniform mixing and low NO(x) emissions at low J due to the strong and adequate jet penetration. No significant correlation was found between the NO(x) production rates and the mixing deviation parameters, however, strong correlation was found between NO(x) formation and jet penetration. In the computational results, most of the NO(x) formation occurred behind the orifice starting at the orifice wake region. Additional NO(x) is formed upstream of the orifice in certain configurations with high J conditions due to the upstream recirculation.

Holdeman, James D.↗
NASA NTRS1948

Nonstationary Gas Flow in Thin Pipes of Variable Cross Section

Characteristic methods for nonstationary flows have been published only for the special case of the isentropic flow up until the present, althought they are applicable in various places to more difficult questions too. This report derives the characteristic method for the flows which depend only on the position coordinates and time. At the same time the treatment of compression shocks is shown.

Guderley, G.↗