SEARCH · Engineering Papers

Results for “Computing methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Estimation of Boltzmann damping coefficients in beam models

A distributed parameter model of a flexible structure with Boltzmann type viscoelastic damping is discussed. A computational method for the estimation of the damping parameters is developed, and theoretical convergence results are given. An example is presented in which actual experimental data is used, demonstrating the efficacy of the computational method and the plausibility of the model for predicting response in damped structures.

Banks, H. T.↗

NASA NTRS1996

A Computational and Experimental Study of Nonlinear Aspects of Induced Drag

Despite the 80-year history of classical wing theory, considerable research has recently been directed toward planform and wake effects on induced drag. Nonlinear interactions between the trailing wake and the wing offer the possibility of reducing drag. The nonlinear effect of compressibility on induced drag characteristics may also influence wing design. This thesis deals with the prediction of these nonlinear aspects of induced drag and ways to exploit them. A potential benefit of only a few percent of the drag represents a large fuel savings for the world's commercial transport fleet. Computational methods must be applied carefully to obtain accurate induced drag predictions. Trefftz-plane drag integration is far more reliable than surface pressure integration, but is very sensitive to the accuracy of the force-free wake model. The practical use of Trefftz plane drag integration was extended to transonic flow with the Tranair full-potential code. The induced drag characteristics of a typical transport wing were studied with Tranair, a full-potential method, and A502, a high-order linear panel method to investigate changes in lift distribution and span efficiency due to compressibility. Modeling the force-free wake is a nonlinear problem, even when the flow governing equation is linear. A novel method was developed for computing the force-free wake shape. This hybrid wake-relaxation scheme couples the well-behaved nature of the discrete vortex wake with viscous-core modeling and the high-accuracy velocity prediction of the high-order panel method. The hybrid scheme produced converged wake shapes that allowed accurate Trefftz-plane integration. An unusual split-tip wing concept was studied for exploiting nonlinear wake interaction to reduced induced drag. This design exhibits significant nonlinear interactions between the wing and wake that produced a 12% reduction in induced drag compared to an equivalent elliptical wing at a lift coefficient of 0.7. The performance of the split-tip wing was also investigated by wing tunnel experiments. Induced drag was determined from force measurements by subtracting the estimated viscous drag, and from an analytical drag-decomposition method using a wake survey. The experimental results confirm the computational prediction.

Smith, Stephen C.↗

NASA NTRS2005

Evolutionary Computing for Low-thrust Navigation

The development of new mission concepts requires efficient methodologies to analyze, design and simulate the concepts before implementation. New mission concepts are increasingly considering the use of ion thrusters for fuel-efficient navigation in deep space. This paper presents parallel, evolutionary computing methods to design trajectories of spacecraft propelled by ion thrusters and to assess the trade-off between delivered payload mass and required flight time. The developed methods utilize a distributed computing environment in order to speed up computation, and use evolutionary algorithms to find globally Pareto-optimal solutions. The methods are coupled with two main traditional trajectory design approaches, which are called direct and indirect. In the direct approach, thrust control is discretized in either arc time or arc length, and the resulting discrete thrust vectors are optimized. In the indirect approach, a thrust control problem is transformed into a costate control problem, and the initial values of the costate vector are optimized. The developed methods are applied to two problems: 1) an orbit transfer around the Earth and 2) a transfer between two distance retrograde orbits around Europa, the closest to Jupiter of the icy Galilean moons. The optimal solutions found with the present methods are comparable to other state-of-the-art trajectory optimizers and to analytical approximations for optimal transfers, while the required computational time is several orders of magnitude shorter than other optimizers thanks to an intelligent design of control vector discretization, advanced algorithmic parameterization, and parallel computing.

optimization↗

NASA NTRS1983

A computer solution for the dynamic load, lubricant film thickness, and surface temperatures in spiral-bevel gears

A computer method for determining the dynamic load between spiral bevel pinion and gear teeth contact along the path of contact is described. The dynamic load analysis governs both the surface temperature and film thickness. Computer methods for determining the surface temperature, and film thickness are presented along with results obtained for a pair of typical spiral bevel gears.

Chao, H. C.↗

NASA NTRS1972

A study of numerical methods for computing reentry trajectories for shuttle-type space vehicles

The reuseable exterior insulation system (REI) is studied to determine the optimal reentry trajectory for a space shuttle, which minimizes the heat input to the fuselage. The REI is composed of titanium, covered by a surface insulation material. The method of perturbation functions was used to generate the trajectories, and proved to be an effective technique for generating families of solutions, once an initial trajectory has been obtained.

Source record↗

NASA NTRSDate not supplied

Three Dimensional Surface Redefinition Method for Computational Ice Accretion Solvers

Computational tools have been increasing in maturity and are thus commonly used in the engineering design process. Advancements in NASA’s current state of the art computational ice accretion tool are required to tackle the icing challenges of tomorrow. GlennICE, a next generation ice accretion solver, is under development at NASA to tackle these challenges. One of the elements of this migration is transitioning from a quasi-three dimensional strip theory based ice accretion methodology to a fully three dimensional methodology. This requires construction of a method to redefine or extrude a discretized or tessellated surface geometry based on the predicted volumetric ice growth for each tessellated surface triangle. This paper describes the methodology that is employed in the GlennICE software, and assesses the performance of the method in replicating a well definied analytical test case.

Computational↗

NASA NTRSDate not supplied

A Numerical Method for Computing the State Transition Matrix Using Poincare Integral Invariants

The Poincare integral invariants describe the volumes of sets in Hamiltonian phase space. We use these invariants to derive a new numerical procedure for obtaining the state transition matrix (STM), which can be applied to both conservative and nonconservative systems. The method is analogous to a finite difference approximation of the STM, where perturbed states are numerically propagated along with the reference trajectory. We discuss the mathematical similarities between this new STM and existing methods, show numerical results for orbital motion and uncertainty propagation, and discuss new insights afforded by the Hamiltonian properties of phase flow.

state transition matrix↗

NASA NTRSDate not supplied

Three Dimensional Surface Redefinition Method for Computational Ice Accretion Solvers

Computational↗

NASA NTRS1971

A method of computing periods of cyclic phenomena.

Use of an analysis of Expected Mean Square Deviations to search for periodicities in an observational data sample is described. The statistic for testing the null hypothesis of nonperiodicity is derived from a partitioning of the total sum of squared deviations from the mean. Unlike most existing methods, the present one does not require equally spaced observations. No assumptions are made concerning the statistical nature of spacing intervals. The method is illustrated by numerical examples.

Jurkevich, I.↗

NASA NTRS1997

Neural Network Prediction of Failure of Damaged Composite Pressure Vessels from Strain Field Data Acquired by a Computer Vision Method

This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,

Russell, Samuel S.↗

NASA NTRS1990

Computational structural mechanics methods research using an evolving framework

Advanced structural analysis and computational methods that exploit high-performance computers are being developed in a computational structural mechanics research activity sponsored by the NASA Langley Research Center. These new methods are developed in an evolving framework and applied to representative complex structural analysis problems from the aerospace industry. An overview of the methods development environment is presented, and methods research areas are described. Selected application studies are also summarized.

Knight, N. F., Jr.↗

NASA NTRS1983

Further development of a method for computing three-dimensional subsonic viscous flows in turbofan lobe mixers

Procedure for computing subsonic, turbulent flow in turbofan lobe mixers was extended to allow consideration of flow fields in which a swirl component of velocity may be present. Additional, an optional k-lambda turbulence model was added to the procedure. The method of specifying the initial flow field was also modified, allowing parametric specification or radial secondary flow velocities, and making it possible to consider initial flow fields which have significant inlet secondary flow vorticity. A series of example calculations was performed which demonstrate the various capabilities of the modified code. These calculations demonstrate the effects of initial secondary flows of various magnitudes, the effects of swirl, and the effects of turbulence model on the mixing process. The results of these calculations indicate that the initial secondary flows, presumed to be generated within the lobes, play a dominant role in the mixing process, and that the predicted results are relatively insensitive to the turbulence model used.

Lin, S. J.↗

DOE OSTI2020

Synergism of anisotropic and computational NMR methods reveals the likely configuration of phormidolide A

Characterization of the complex molecular scaffold of the marine polyketide natural product phormidolide A represents a challenge that has persisted for nearly two decades. In light of discordant results arising from recent synthetic and biosynthetic reports, a rigorous study of the configuration of phormidolide A was necessary. This report outlines a synergistic effort employing computational and anisotropic NMR investigation, that provided orthogonal confirmation of the reassigned side chain, as well as supporting a further correction of the C7 stereocenter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1986

Implicit solution methods in computational fluid dynamics

A class of implicit finite difference schemes of the Beam and Warming approximate factorization type will be addressed. The development and analysis of various aspects of this class of schemes will be given along with the motivations behind many of the choices. Various acceleration and efficiency modifications such as matrix reduction, diagonalization and flux split schemes will be presented. The methods are demonstrated in fully vectorized codes for a CRAY type architecture. The emphasis will be on the Euler equations in generalized coordinates.

Pulliam, Thomas H.↗

NASA NTRS1994

Project JOVE

The goal of this project is to investigate new areas of research pertaining to free surface-interface fluids mechanics and/or microgravity which have potential commercial applications. This paper presents an introduction to ferrohydrodynamics (FHD), and discusses some applications. Also, computational methods for solving free surface flow problems are presented in detail. Both have diverse applications in industry and in microgravity fluids applications. Three different modeling schemes for FHD flows are addressed and the governing equations, including Maxwell's equations, are introduced. In the area of computational modeling of free surface flows, both Eulerian and Lagrangian schemes are discussed. The state of the art in computational methods applied to free surface flows is elucidated. In particular, adaptive grids and re-zoning methods are discussed. Additional research results are addressed and copies of the publications produced under the JOVE Project are included.

Lyell, M. J.↗

NASA NTRS1991

A non-iterative method for computing the infimum in H(infinity)-optimization

The authors, as an extension of their earlier work, present a simple noniterative procedure for the computation of the exact value of the infimum in the singular H(infinity)-optimization problem and is an extension of their earlier work. The problem formulation is general and does not place any restrictions on the direct feedthrough terms between the disturbance input and the measurement output variables. The method is applicable to a class of singular H(infinity)-optimization problems for which the transfer functions from the control input to the controlled output and from the disturbance input to the measurement output have no invariant zeros on the j-omega axis and also satisfy certain geometric conditions.

Chen, Ben M.↗

NASA NTRS1992

Interferometric reconstruction of three-dimensional high-speed aerodynamic flows

Holographic interferometry can be a very useful diagnostic tool in high-speed aerodynamic testing. During this summer research period, various possible approaches for accurately reconstructing three-dimensional flows from limited data were examined. The approach based on the combination of the following three techniques appears to be promising: (1) Continuous Local Basis Function Method - this computational tomographic method has a power to accurately reconstruct continuous regions and is appropriate from well-conditioned to moderately limited data; (2) Variable Basis Method - this computational tomographic method provides accuracy near discontinuities, i.e., shock regions, and is appropriate from moderately-limited to severely-limited data; and (3) Complementary Field Method - this is a general iterative reconstructor that can be coupled with any computational tomographic techniques. Mathematically, it can be shown that this method can provide better accuracy than the direct reconstruction as in a conventional approach. Our numerical simulation of experiments demonstrated improved reconstruction results even when these techniques were individually tested.

Cha, Soyoung Stephen↗

NASA NTRS1991

Domain decomposition methods in computational fluid dynamics

The divide-and-conquer paradigm of iterative domain decomposition, or substructuring, has become a practical tool in computational fluid dynamic applications because of its flexibility in accommodating adaptive refinement through locally uniform (or quasi-uniform) grids, its ability to exploit multiple discretizations of the operator equations, and the modular pathway it provides towards parallelism. These features are illustrated on the classic model problem of flow over a backstep using Newton's method as the nonlinear iteration. Multiple discretizations (second-order in the operator and first-order in the preconditioner) and locally uniform mesh refinement pay dividends separately, and they can be combined synergistically. Sample performance results are included from an Intel iPSC/860 hypercube implementation.

Gropp, William D.↗