Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

The Prevalence of Precipitation From Polar Supercooled Clouds

Supercooled clouds substantially impact polar surface energy budgets, but large-scale models often underestimate their occurrence, which motivates accurately establishing metrics of basic processes. An analysis of long-term measurements at Utqiaġvik, Alaska, and McMurdo Station, Antarctica, combines lidar-validated use of soundings to identify supercooled cloud layers and colocated ground-based profiling radar measurements to quantify cloud base precipitation. We find that more than 85 % (75 %) of sampled supercooled layers are precipitating over the Arctic (Antarctic) site, with more than 75 % (50 %) precipitating continuously to the surface. Such high frequencies can be reconciled with substantially lesser spaceborne estimates by considering differences in radar hydrometeor detection sensitivity. While ice precipitation into supercooled clouds from aloft is common, we also find that the great majority of supercooled cloud layers without ice falling into them are themselves continuously generating precipitation. Such sustained primary ice formation is consistent with continuous activation of immersion-mode ice-nucleating particles (INPs), suggesting that supercooled cloud formation is a principal gateway to ice formation at temperatures greater than ∼−38 ∘C over polar regions. The prevalence of weak precipitation fluxes is also consistent with supercooled cloud longevity and with well-observed and widely simulated case studies. An analysis of colocated microwave radiometer retrievals suggests that weak precipitation fluxes can be nonetheless consequential to moisture budgets for supercooled clouds owing to small liquid water paths. The results here also demonstrate that the observed abundance of mixed-phase clouds can vary substantially with instrument sensitivity and methodology. Finally, we suggest that these ground-based precipitation rate statistics offer valuable guidance for improving the representation of polar cloud processes in large-scale models.

Supercooled clouds↗

Combined Radar and Radiometer Analysis of Precipitation Profiles for a Parametric Retrieval Algorithm

A methodology to analyze precipitation profiles using the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) and precipitation radar (PR) is proposed. Rainfall profiles are retrieved from PR measurements, defined as the best-fit solution selected from precalculated profiles by cloud-resolving models (CRMs), under explicitly defined assumptions of drop size distribution (DSD) and ice hydrometeor models. The PR path-integrated attenuation (PIA), where available, is further used to adjust DSD in a manner that is similar to the PR operational algorithm. Combined with the TMI-retrieved nonraining geophysical parameters, the three-dimensional structure of the geophysical parameters is obtained across the satellite-observed domains. Microwave brightness temperatures are then computed for a comparison with TMI observations to examine if the radar-retrieved rainfall is consistent in the radiometric measurement space. The inconsistency in microwave brightness temperatures is reduced by iterating the retrieval procedure with updated assumptions of the DSD and ice-density models. The proposed methodology is expected to refine the a priori rain profile database and error models for use by parametric passive microwave algorithms, aimed at the Global Precipitation Measurement (GPM) mission, as well as a future TRMM algorithms.

Masunaga, Hirohiko↗

Saturn's central flash from the 3 July 1989 occultation of 28 Sgr

We present observations of Saturn's central flash obtained from Palomar and McDonald Observatories during the 3 July 1989 occultation of 28 Sgr. As the star passed close to the geometric center of Saturn's shadow, the focusing of the incident starlight by the planet's atmosphere formed multiple stellar images along the limb which were detected in infrared images obtained at wavelengths of 3.9 (Palomar) and 2.1 microns (McDonald). These are the first reported observations of a central flash due to Saturn, and the first of any planet in which the signal flash from each stellar image could be determined separately, permitting a comparison of both intensity and position for each image with model predictions. Four separate flashes were observed from each observatory, corresponding to points on the limb where the starlight passed through the Cassini Division and the relatively transparent C Ring, with maximum brightness reaching 1-2% of the unocculted stellar intensity. The timing of the flashes is quite sensitive to the shape of Saturn's limb, which depends in turn on the planet's zonal gravity harmonics and on the zonal wind profile in the lower stratosphere, near the 2.5-mbar pressure level. The locations of the images along the limb, as well as the timing, shapes, and amplitudes of the individual flash light curves, are well matched by a smoothed model based on a tropospheric zonal wind profile obtained from tracking cloud features in Voyager images and the Saturn ring optical depth profile obtained from the Voyager Photopolarimeter experiment. The smoothing required to give the best match to the data exceeds that attributable to the finite angular extent of the occulted star and may be due to refractive scattering by turbulence or wave structure in Saturn's atmosphere. There is no evidence of significant atmospheric absorption at the observed wavelengths, which correspond to spectral regions of weak methane absorption.

Nicholson, Philip D.↗

Apperception of Clouds in AIRS Data

Our capacity to simulate the radiative characteristics of the Earth system has advanced greatly over the past decade. However, new space based measurements show that idealized simulations might not adequately represent the complexity of nature. For example, AIRS simulated multi-layer cloud clearing research provides an excellent groundwork for early Atmospheric Infra-Red Sounder (AIRS) operational cloud clearing and atmospheric profile retrieval. However, it doesn't reflect the complicated reality of clouds over land and coastal areas. Thus far, operational AIRS/AMSU (Advanced Microwave Sounding Unit) cloud clearing is not only of low yield but also of unsatisfying quality. This is not an argument for avoiding this challenging task, rather a powerful argument for exploring other synergistic approaches, and for adapting these strategies toward improving both indirect and direct use of cloudy infrared sounding data. Ample evidence is shown in this paper that the indirect use of cloudy sounding data by way of cloud clearing is sub-optimal for data assimilation. Improvements are needed in quality control, retrieval yield, and overall cloud clearing retrieval performance. For example, cloud clearing over land, especially over the desert surface, has led to much degraded retrieval quality and often a very low yield of quality controlled cloud cleared radiances. If these indirect cloud cleared radiances are instead to be directly assimilated into NWP models, great caution must be used. Our limited and preliminary cloud clearing results from AIRS/AMSU (with the use of MODIS data) and an AIRS/MODIS synergistic approach have, however, shown that higher spatial resolution multispectral imagery data can provide much needed quality control of the AIRS/AMSU cloud clearing retrieval. When AIRS and Moderate Resolution Imaging Spectroradiometer (MODIS) are used synergistically, a higher spatial resolution over difficult terrain (especially desert areas) can be achieved and with a much improved accuracy. Preliminary statistical analyses of cloud cleared radiances derived from (1) operational AIRS/AMSU, (2) operational AIRS/AMSU plus the use of MODIS data as quality control, and (3) AIRS/MODIS synergistic single channel and two field of views cloud clearing are Our capacity to simulate the radiative characteristics of the Earth system has

Huang, Hung-Lung↗

Performance of the Lidar Design and Data Algorithms for the GLAS Global Cloud and Aerosol Measurements

The Geoscience Laser Altimeter System (GLAS) launched in early 2003 is the first polar orbiting satellite lidar. The instrument design includes high performance observations of the distribution and optical scattering cross sections of atmospheric clouds and aerosol. The backscatter lidar operates at two wavelengths, 532 and 1064 nm. For the atmospheric cloud and aerosol measurements, the 532 nm channel was designed for ultra high efficiency with solid state photon counting detectors and etalon filtering. Data processing algorithms were developed to calibrate and normalize the signals and produce global scale data products of the height distribution of cloud and aerosol layers and their optical depths and particulate scattering cross sections up to the limit of optical attenuation. The paper will concentrate on the effectiveness and limitations of the lidar channel design and data product algorithms. Both atmospheric receiver channels meet and exceed their design goals. Geiger Mode Avalanche Photodiode modules are used for the 532 nm signal. The operational experience is that some signal artifacts and non-linearity require correction in data processing. As with all photon counting detectors, a pulse-pile-up calibration is an important aspect of the measurement. Additional signal corrections were found to be necessary relating to correction of a saturation signal-run-on effect and also for daytime data, a small range dependent variation in the responsivity. It was possible to correct for these signal errors in data processing and achieve the requirement to accurately profile aerosol and cloud cross section down to 10-7 llm-sr. The analysis procedure employs a precise calibration against molecular scattering in the mid-stratosphere. The 1064 nm channel detection employs a high-speed analog APD for surface and atmospheric measurements where the detection sensitivity is limited by detector noise and is over an order of magnitude less than at 532 nm. A unique feature of the GLAS is a full acquisition of the surface return pulse, which has important application to the atmospheric transmission retrieval.

Spinhirne, James D.↗

Voyager 2 observations of Saturn's northern mid-latitude cloud features - Morphology, motions, and evolution

Voyager 2 images provide a basis for detailed study of the morphology and circulation of Saturn's northern midlatitudes. Both Saturn's large-scale cloud bands and the distribution of its local cloud features have a characteristic zonal organization. The region between 30 N and 45 N contains two oppositely directed jets in close proximity, with many bright, active features in the westward jet, and an unusual ribbonlike wave feature encircling the planet in the eastward jet. Several of the smaller features within the westward jet do not remain at fixed latitudes and interact with each other. One group of v-shaped features is found to have periods of high activity correlated with the passage of a cyclonic bright spot. The ribbon wave was Fourier analyzed to determine its spectral composition. The greatest power is near wave number 9, with significant additional peaks appearing at planetary wave numbers 19, 25-27, 35-38, and 47-51. The phase velocity increases with wave number but is not well described by a Rossby-Haurwitz dispersion relation. The curvature of the mean wind profile obtained from cloud tracking indicates that the westward jet exceeds the standard barotropic instability condition, while the eastward jet marginally exceeds the deep-circulation instability condition of Ingersoll and Pollard (1982). The rms eddy velocities on Saturn are less than half as large as those observed on Jupiter.

Sromovsky, L. A.↗

High-Altitude MMIC Sounding Radiometer for the Global Hawk Unmanned Aerial Vehicle

Microwave imaging radiometers operating in the 50-183 GHz range for retrieving atmospheric temperature and water vapor profiles from airborne platforms have been limited in the spatial scales of atmospheric structures that are resolved not because of antenna aperture size, but because of high receiver noise masking the small variations that occur on small spatial scales. Atmospheric variability on short spatial and temporal scales (second/ km scale) is completely unresolved by existing microwave profilers. The solution was to integrate JPL-designed, high-frequency, low-noise-amplifier (LNA) technology into the High-Altitude MMIC Sounding Radiometer (HAMSR), which is an airborne microwave sounding radiometer, to lower the system noise by an order of magnitude to enable the instrument to resolve atmospheric variability on small spatial and temporal scales. HAMSR has eight sounding channels near the 60-GHz oxygen line complex, ten channels near the 118.75-GHz oxygen line, and seven channels near the 183.31-GHz water vapor line. The HAMSR receiver system consists of three heterodyne spectrometers covering the three bands. The antenna system consists of two back-to-back reflectors that rotate together at a programmable scan rate via a stepper motor. A single full rotation includes the swath below the aircraft followed by observations of ambient (roughly 0 C in flight) and heated (70 C) blackbody calibration targets located at the top of the rotation. A field-programmable gate array (FPGA) is used to read the digitized radiometer counts and receive the reflector position from the scan motor encoder, which are then sent to a microprocessor and packed into data files. The microprocessor additionally reads telemetry data from 40 onboard housekeeping channels (containing instrument temperatures), and receives packets from an onboard navigation unit, which provides GPS time and position as well as independent attitude information (e.g., heading, roll, pitch, and yaw). The raw data files are accessed through an Ethernet port. The HAMSR data rate is relatively low at 75 kbps, allowing for real-time access over the Global Hawk high-data-rate downlink. Once on the ground, the raw data are unpacked and processed through two levels of processing. The Level 1 product contains geo-located, time-stamped, calibrated brightness temperatures for the Earth scan. These data are then input to a lD variational retrieval algorithm to produce temperature, water vapor, and cloud liquid water profiles, as well as several derived products such as potential temperature and relative humidity.

Brown, Shannon T.↗

CO(J = 1-0) line emission from giant molecular clouds

Numerical models of the (C-12)O (J = 1-0) line emission from giant molecular clouds (GMCs) have been constructed. Line profiles are presented for both microturbulent and macroturbulent clouds. The observed width of the CO (J = 1-0) line cannot be physically interpreted as a microturbulent gas velocity dispersion. Microturbulent models produce emission with a wide range of profile shapes and brightness temperatures at line center over a cloud mass range of 100 to 10 exp 6 solar masses. Macroturbulent models produce smooth, centrally peaked profiles. Clumpy GMC models can produce peak brightness temperatures over about 6 K provided that clump densities are larger than 1000/cu cm. If there are no significant velocity gradients, photoelectric heating dominates in the region where the CO line arises. The observed relation between cloud mass and CO luminosity can be constructed from theoretical models.

Wolfire, Mark G.↗

Compact, directional neutron detectors capable of high-resolution nuclear recoil imaging

We report on the design, production, and performance of compact 40-cm3 Time Projection Chambers (TPCs) that detect fast neutrons by measuring the three-dimensional (3D) ionization distribution of nuclear recoils in 4 He:CO 2 gas at atmospheric pressure. We use these detectors to characterize the fast-neutron flux inside the Belle II detector at the SuperKEKB electron–positron collider in Tsukuba, Japan, where the primary design constraint is a small form factor. We find that the TPCs meet or exceed all design specifications, and are capable of measuring the 3D surface shape and charge density profile of ionization clouds from nuclear recoils and charged tracks in exquisite detail. Scaled-up detectors based on the detection principle demonstrated here may be suitable for directional dark matter searches, measurements of coherent neutrino–nucleus scattering, and other experiments requiring precise detection of neutrons or nuclear recoils.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effects of Surface and Top Wind Shear on the Spatial Organization of Marine Stratocumulus-Topped Boundary Layers

Typically, the convective nature of Stratocumulus topped boundary layers (STBL) involves the motion of updrafts and downdrafts, driven by surface fluxes and radiative cooling, respectively. The balance between shear and buoyant forcings at the surface can determine the organization of updrafts between cellular and roll structures. We investigate the effect of varying shear at the surface and top of the STBL using Large Eddy Simulations, taking DYCOMS II RF01 as a base case. We focus on spatial identification of the following features: coherent updrafts and downdrafts, and observe how they are affected by varying shear. Stronger surface shear organizes the updrafts in rolls, causes less well-mixed thermodynamic profiles, and decreases cloud fraction and liquid water path (LWP). Stronger top shear also decreases cloud fraction and LWP more than surface shear, by thinning the cloud from the top. Features with stronger top than surface shear are associated with a net downward momentum transport and show early signs of decoupling. Classifying updrafts and downdrafts based on their vertical span and horizontal size confirms the dominance of tall objects spanning the whole STBL. Tall objects occupy 30% of the volume in the STBL, while short ones occupy less than 1%. For updraft and downdraft fluxes, these tall objects explain 65% of the vertical velocity variance and 83% of the buoyancy flux, on average. Stronger top shear also weakens the contribution of downdrafts to the turbulent fluxes and tilts the otherwise vertical development of updrafts.

54 ENVIRONMENTAL SCIENCES↗

Turbulent properties from Doppler lidar

Permanent and mobile facilities deployed by the ARM program cover a wide range of climatic regions, with a suite of active remote-sensing of cloud and aerosol profiles complemented by comprehensive in-situ measurements of the chemical, physical and optical properties of aerosol measured at the surface. To be able to fully exploit these datasets requires an understanding of the transport from the surface and within the atmosphere, especially within the planetary boundary layer. This requires a method of identifying when the surface and atmosphere are dynamically-linked. Determining the state of the boundary layer, and defining a well-mixed boundary-layer, is therefore suitably described in terms of mixing; here, we will assume that mixing essentially means turbulent mixing. This necessitates accurate measurements of the winds and turbulent mixing in the atmosphere. Doppler lidar is an excellent tool for observing turbulent properties, and ARM has deployed commercially available Doppler lidars at many of the fixed and mobile facilities. Doppler lidars have been shown to provide accurate retrievals of wind and turbulent properties within the boundary layer , however, robust characterization and calculation of the Doppler lidar measurement uncertainties is required before deriving higher level data products.

54 ENVIRONMENTAL SCIENCES↗

Neutronics Analysis of Heating and DPA of the Proton Beam Window and Core Vessel Nozzle Neutronics Heating Analysis for the Second Target Station

This reports details the analysis of the heating rates, dpa values and He production in the Proton Beam Window (PBW) assembly and the Core Vessel (CV) nozzle for the preliminary design for the Second Target Station (STS). This analysis focuses on the heating rates in the cooled beltline component of the CV. Neutronics calculations use a detailed unstructured mesh (UM) converted from a CAD model in SpaceClaim of the PBW and CV design of February 2024. The rest of the geometry is taken from the STS master model in constructive solid geometry (CSG). Heating is evaluated for four beam profiles, which are chosen as the most likely to produce the highest heating in the beltline component. The maximum energy deposition values in the beltline are 0.02-0.08 J/cc/pulse, depending on the beam profile. Detailed point cloud data of the full UM geometry is made available for mechanical analysis. The maximum dpa rate in the beltline steel is approximately 0.02 dpa/year, which corresponds to a lifetime of 3,000 years. These results are in good agreement with previous results for the CV. For the PBW itself, maximal heating, dpa, and He production rates are very similar to the previous analysis.

43 PARTICLE ACCELERATORS↗

NASA's atmospheric variability experiments /AVE/

A series of seven mesoscale experiments were conducted under the NASA program, Atmospheric Variability Experiments (AVE). Rawinsonde, satellite, aircraft, and ground observations were recorded during specially selected meteorological periods lasting from 1 to 3 days. Details are presented for each AVE relative to observation times, experiment size and location, and significant weather. Some research results based on the use of these AVE data are referenced. These include contributions to regional numerical prediction; relations between wind shears, instability, and thunderstorm motion and development; relations between moisture and temperature and the probability of convection; retrieval of tropospheric temperature profiles from cloud-contaminated satellite data; variation of convection intensity as a result of atmospheric variability; and effects of cloud rotation on their trajectories.

Hill, K.↗

Visibility and aerosol measurement by diode-laser random-modulation CW lidar

Examples of diode laser (DL) random-modulation continuous wave (RM-CW) lidar measurements are reported. The ability of the measurement of the visibility, vertical aerosol profile, and the cloud ceiling height is demonstrated. Although the data shown here were all measured at night time, the daytime measurement is, of course, possible. For that purpose, accurate control of the laser frequency to the center frequency of a narrow band filter is required. Now a new system with a frequency control is under construction.

Takeuchi, N.↗

Remote sensing of land-surface temperature from HIRS/MSU data

A relaxation algorithm which permits meteorological parameters to be obtained from satellite data, without a priori assumptions about the properties of the other unknowns in the field of view, was developed. Atmospheric temperature profiles, atmospheric humidity, cloud cover, cloud top height, cloud top temperature, sea-surface temperature, land-surface temperature, snow cover, and ice cover are derived. Simultaneous determination of atmospheric and surface thermal structure and the cloud distribution provides information on heat sources and sinks, storage rates, and transport phenomena in the atmosphere. Such information is critical in determining the driving mechanisms for motions in the atmosphere and oceans and in improving numerical weather prediction.

Chahine, M. T.↗

Airport surveillance using a solid state coherent lidar

The utility of solid state coherent LIDAR was assessed in the following application areas: (1) wake vortices; (2) dry and wet microburst windshear; (3) gusts; (4) vertical and general wind profiling; and (5) cloud ceiling. The system performance model described was based on a concept definition, system sizing, measurement planning, and algorithm and graphics display development. Data were collected at the Kennedy Space Center and the National Weather Service site adjacent to Denver's Stapleton Airport.

Huffaker, R. Milton↗