SEARCH · Engineering Papers

Results for “Characteristics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Measurement of low energy characteristic X-rays emitted present in U-10Mo HALEU alloy fuel

Advance high density monolithic alloy HALEU fuels have been scanned with a silicon drift detector scanning system to measure low-energy characteristic X-rays emitted by uranium daughters, as well as zirconium present as a foil diffusion barrier. Four peaks were measured across the surfaces of three plates, and are consistent with other thorium and protactinium peaks present in depleted uranium samples that are induced by the decay of 235 U and 238 U. Of the four peaks detected, three are dominated by the decay of 235 U, and one peak at 15.70 keV covers two characteristic X-rays from the zirconium diffusion barrier (Kα 1 ) and from a 231 Th 15.62 keV X-ray induced by 235 U α-decay. The low energies of these lines suggest that they are mostly emitted from the fuel meat surface, and the poor counting statistics caused by strong self-attenuation make these data a poor candidate for 235 U/ 238 U ratio analysis. We suggest, then, that these X-rays could be used for passive measurement of variations in the cladding thickness of these fuels to complement manual thickness measurement methods.

HALEU↗

DOE OSTI2022

Defect and satellite characteristics of additive manufacturing metal powders

Metal additive manufacturing (AM) requires high-quality metal powders to three-dimensionally (3D) print metallic components with complex and customizable geometries. The lack of quantification of AM metal powders creates quality control challenges for 3D printed components, increases the uncertainty of printing reliability and net cost of inspected and certified printed components, and reduces the recyclability of used powders. However, critical characteristics of AM metal powders that are decisive factors for the 3D printing process, such as internal porosity, contamination, and satellite feature, remain ambiguous. In this work, we developed a novel approach to 3D quantify key characteristics of AM metal powders down to individual particles by using high-resolution synchrotron x-ray computed tomography. Empowered by the penetrative capability of high-energy x-ray, internal porosity and contamination within as-atomized metal powders from high-entropy alloys to nickel-based superalloys were evaluated. Additionally, the newly-developed dispersion method enables the homogeneous separation of individual particles, and consequently, results in the implementation of 3D particle shape analysis. To resolve a major challenge of identification and quantification of satellite-feature particles in as-atomized AM metal powders, the satellite features were quantitated by modeling and analyzing the shape parameter of local thickness variance. Furthermore, the 3D analytical methods of particle assessment in this study can be applied to other materials systems like rock, food, and pharmaceutical particles, and provide insights for process optimization across powder metallurgy, concrete, food and pharmaceutical manufacturing, and AM industries.

36 MATERIALS SCIENCE↗

DOE OSTI2021

New insights into creep characteristics of calcium silicate hydrates at molecular level

The fundamental mechanisms under concrete creep are far from being fully understood, especially at the molecular level. Hereby, a calcium-silicate-hydrate (C-S-H) molecular model is developed to explain, for the first time, the creep characteristics at various stress states, temperature levels and water contents, which are not accessible experimentally. Rather tensile and compressive loadings, C-S-H only creeps under shear loadings originating from the sliding of the calcium silicate layers over each other as the interlayer component (water and ions) acts as a lubricator. A heterogeneous creep characteristic is observed. Elevated temperature reduces the interlayer lubricator viscosity and weakens the interfacial adhesion between the layers and the interlayer lubricator, which accelerates C-S-H creep. The removal of interlayer water enhances the creep resistance, resulting from the reduced interlayer space and enhanced interfacial adhesion. The atomic-level mechanisms explain the inter-CSH-particle behaviours at the microscale, which bridges the gap between atomistic simulation and microcosmic phenomenon.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Intrinsic reactivity and dissolution characteristics of tetracalcium aluminoferrite

Tetracalcium aluminoferrite is one of the main phases of Portland cement, the dissolution characteristics of which however have not been fully revealed. This work adopted first-principles calculations and Mössbauer spectroscopy as well as X-ray diffraction analysis to clarify the intrinsic reactivity of different species of tetracalcium aluminoferrite crystals. Ca ions are the most reactive species of tetracalcium aluminoferrite and Al ions are slightly more reactive than Fe ions. Moreover, the tetrahedral Al and Fe ions are more reactive than the octahedral Al and Fe ions. These indicate dissolution characteristics of tetracalcium aluminoferrite crystals, namely, Ca ions dissolve first and the tetrahedral species dissolve faster than the octahedral species. After the initial dissolution, the dissolved ions nucleate and grow on the defective surface of C{sub 4}AF and the C{sub 4}AF residues are fully hydroxylated. The further hydration thereafter becomes the complex dissolution with the nucleation and growth of hydration products.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Understanding geopolymer binder-aggregate interfacial characteristics at molecular level

The interfacial characteristics of geopolymer binder to aggregate composites are poorly understood, especially at molecular level. Herein, molecular models are developed to study, for the first time, the geopolymer-aggregate interface. Chemically, various forms of interfacial bonding are characterized, including Al-O-Si bonding through condensation reactions, NaO and H-bonding. An atomic-level interfacial transition zone (ITZ) is identified, attributed to the concentration of –OH groups. Increasing the Si/Al ratio of geopolymer is found to decrease the ITZ density, but have limited effect on the ITZ width. A heterogeneous diffusion characteristic occurs in geopolymer, due to the weak interfacial interaction. Mechanically, lowering the Si/Al ratio promotes the interfacial strength due to the stronger interfacial interaction and higher cross-linking degree in geopolymer. Under loading the interfacial fracture undergoes three stages: crack propagation, chain bridging (including aluminosilicate and ionic bridging) and breakage. The above atomic-level findings may facilitate a better design of geopolymer concrete in engineering.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Spray and combustion characteristics of butanol-diesel and hexanol-diesel blends under high-altitude conditions

Due to their excellent fuel properties, butanol and hexanol are considered as two promising renewable fuels for diesel engine applications. The objective of this work is to investigate and compare the spray and combustion characteristics of butanol-diesel and hexanol-diesel blends under high-altitude conditions. A constant volume combustion chamber was used to provide the desired environment. Experiments were conducted under various ambient temperatures ranging from 800 K to 1200 K and various ambient densities ranging from 11 kg/m3 to 15 kg/m3. Fuel blends with 20% blend ratio (B20 and H20) and neat diesel were used as test fuels. The spray and combustion characteristics of the test fuels were analyzed using measured liquid penetration length, ignition delay, combustion duration, flame lift-off length (FLoL), and spatially integrated natural luminosity (SINL). Here the results revealed that B20 and H20 had shorter liquid penetration length than diesel under low ambient temperature and density conditions due to their higher volatility. The blended fuels showed significantly longer ignition delay than diesel under low ambient temperature conditions, but it could be overcome by increasing the ambient temperature. Adding butanol and hexanol into diesel both extended FLoL especially under low ambient temperature and density conditions, but the effects of hexanol was less dramatic compared to butanol due to its lower latent heat of vaporization and higher chemical reactivity. Both B20 and H20 showed lower SINL than diesel under any conditions, indicating their ability of reducing soot emissions. However, no apparent differences could be found between these two fuels until the ambient temperature dropped to 800 K.

42 ENGINEERING↗

DOE OSTI2022

Impact of coolant temperature on the combustion characteristics and emissions of a stratified-charge direct-injection spark-ignition engine fueled with E30

The direct injection spark ignition (DISI) engine has received considerable attention due to its potential to increase the power density of traditional spark ignition engines while significantly improving fuel economy through lean, unthrottled combustion. However, the market introduction of DISI engines operated in a lean combustion mode is inhibited by their unsatisfactory emissions, especially during cold start conditions that make proper mixture formation more challenging. Ethanol-blended gasoline, now a widely used fuel, makes the cold start of a DISI engine more difficult, leading to higher HC and soot emissions because of the high latent heat of vaporization of ethanol relative to gasoline. This work investigated the impact of coolant temperature on the characteristics of combustion and emissions in a stratified-charge DISI engine fueled with an E30 fuel (i.e. 30% ethanol in gasoline), while the coolant temperature was alternated between four levels (45, 60, 75, and 90 °C) to simulate different conditions throughout the warm-up process. The experiments showed that the coolant temperature affected the post-spark inflammation time, as well as the speed, intensity, and stability of the combustion process in the engine. When the coolant temperature rose, the engine produced more NOX and less CO, PM and HC. In addition, high-speed direct photography was used to obtain crank-angle resolved images of fuel sprays and flames in the cylinder. As the coolant temperature rose, the liquid spray lengths became shorter, reducing the possibility of wall wetting, and reduced irradiance from soot particles also indicated less nonpremixed combustion. The in-cylinder imaging results are consistent with the observed combustion and emission characteristics and shed light on the underlying processes. Finally, some potential solutions to the emissions challenges faced here could be either raising in-cylinder temperatures by using trapped residuals or modifying the injection schedule, for example by increasing the number of injections or to inject later in the cycle into a higher-density environment.

42 ENGINEERING↗

DOE OSTI2022

Brazing characteristics, microstructure, and wettability of laser powder bed fusion additive manufactured GRCop-84 compared to CuCrZr and OFC, and brazing to titanium-zirconium-molybdenum alloy limiters

Laser Powder Bed Fusion (L-PBF) of Glenn Research Copper 84 (GRCop-84), a Cr 2 Nb (8 at. % Cr, 4 at. % Nb) precipitation hardened alloy, produces a fully dense, high conductivity alloy with a yield strength of 500 MPa and ultimate tensile strength (UTS) of 740 MPa with 20% elongation; superior to other competing copper alloys. Braze wetting characteristics of GRCop-84 with Ag-Cu-X, and Au-Cu brazes were similar to CuCrZr, but less than oxygen free copper. No difference in wetting was observed between infill and surface contour areas in L-PBF GRCop-84. Wet sanding to 240 grit (R a =0.24 µm) was considered the optimal surface condition. Silver diffusing through GRCop-84 depleted Cr 2 Nb precipitates from the copper grain and deposited agglomerations of coarsened precipitates within silver-rich regions of intergranular diffusion once a density threshold was reached. Microstructure modification was minimized with 50Au-50Cu braze implying that silver caused precipitate coarsening and agglomeration, and not high temperature exposure. Coarsened precipitates were observed on the surface within braze pools implying a contribution to braze wetting. Palcusil-25, Ticusil, CuSil-ABA, and 50Au-50Cu brazes were suitable for brazing to unplated Titanium-Zirconium-Molybdenum (TZM), while sulfamate nickel plating to allows wetting with CuSil or other non-active brazes. Additionally, vacuum brazing techniques were developed to join a 1 mm thick layer of TZM to the front of additive manufactured GRCop-84 waveguides considering the brazing characteristics of both GRCop-84, TZM, and internal stress from the difference in coefficient in thermal expansion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Towards understanding the development and characteristics of under-expanded flash boiling jets

Here in this research, the n-hexane jets discharged from a straight channel were studied numerically to reveal the development and characteristics of under-expanded flashing jets. Firstly, the development of flash boiling jets was investigated and compared to that of two-phase jets without phase transition. It was shown that the two-phase jets without phase transition can be under-expanded only if the flow is choked. In contrast, flash boiling jets can be under-expanded whether or not the choked conditions are verified. Secondly, the factors affecting the flashing jet behaviors were discussed. The relaxation time in phase transition, the expansion ratio, and the injection pressure have been identified as three key factors determining the jet characteristics. With high enough expansion ratio and low enough relaxation time, the expansion was so strong that the flow became transonic and shock structures similar to those of under-expanded gaseous jets appeared near the orifice exit. Finally, two types of choking have been identified for flash boiling jets, i.e., vaporization-induced choking and expansion-induced choking. The former one is mainly ascribed to the vapor formation in the orifice which reduces the local speed of sound, while the latter one is due to the expansion of under-expanded two-phase flow and the resultant flow acceleration.

42 ENGINEERING↗

DOE OSTI2020

Size- and concentration-dependent Eu 2+ /Eu 3+ mixed luminescent characteristics of rare-earth-doped CaF 2 nanoparticles and their monolithic epoxy nanocomposites

CaF 2 is a promising luminescent host material for a wide range of applications, due to its high transparency, non-hygroscopy, low refractive index, low density, low backscattering efficiency, and abundance in nature. Here we report the photoluminescence (PL) and cathodoluminescence (CL) characteristics of rare-earth-doped CaF 2 nanoparticles and their composite monoliths with epoxy with visible emissions. The CaF 2 nanoparticles of ca. 36, 108 and 305 nm were prepared by a facile solution-mixing process and subsequent hydrothermal treatment. As the particle size decreases, the luminescence intensity increases for single-doped particles, while oppositely decreases for codoped particles because of energy transfer. Further, Eu 2+ - and Tb 3+ -codoped CaF 2 nanoparticles exhibit red emission, providing an efficient path for red emission through an energy transfer by Tb 3+ bridging without direct Eu 3+ doping. The effects of size and concentration are found to be pronounced in CL than PL, as the charge transfer between Eu 2+ and Eu 3+ reduces the concentration quenching in CL. The luminescence emission characteristics of epoxy/CaF 2 monoliths are different from those of particles due to the interactions with the epoxy molecules, and thus the energy transfer is hindered in PL while not in CL, enabling them for high-energy irradiation applications.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Process mining for healthcare: Characteristics and challenges

Process mining techniques can be used to analyse business processes using the data logged during their execution. These techniques are leveraged in a wide range of domains, including healthcare, where it focuses mainly on the analysis of diagnostic, treatment, and organisational processes. Despite the huge amount of data generated in hospitals by staff and machinery involved in healthcare processes, there is no evidence of a systematic uptake of process mining beyond targeted case studies in a research context. When developing and using process mining in healthcare, distinguishing characteristics of healthcare processes such as their variability and patient-centred focus require targeted attention. Against this background, the Process-Oriented Data Science in Healthcare Alliance has been established to propagate the research and application of techniques targeting the data-driven improvement of healthcare processes. This paper, an initiative of the alliance, presents the distinguishing characteristics of the healthcare domain that need to be considered to successfully use process mining, as well as open challenges that need to be addressed by the community in the future.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Study of interconnect errors, network congestion, and applications characteristics for throttle prediction on a large scale HPC system

Today’s High Performance Computing (HPC) systems contain thousand of nodes which work together to provide performance in the order of petaflops. The performance of these systems depends on various components like processors, memory, and interconnect. Among all, interconnect plays a major role as it glues together all the hardware components in an HPC system. A slow interconnect can impact a scientific application running on multiple processes severely as they rely on fast network messages to communicate and synchronize frequently. Unfortunately, the HPC community lacks a study that explores different interconnect errors, congestion events and applications characteristics on a large-scale HPC system. In our previous work, we process and analyze interconnect data of the Titan supercomputer to develop a thorough understanding of interconnects faults, errors, and congestion events. In this work, we first show how congestion events can impact application performance. We then investigate application characteristics interaction with interconnect errors and network congestion to predict applications encountering congestion with more than 90% accuracy.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Sulfide precipitation characteristics of Mn, Ni, Co, and Zn in the presence of contaminant metal ions

In this study, the effects of Al 3+ and Fe 2+ on the precipitation characteristics of four valuable metals, including Mn 2+ , Ni 2+ , Co 2+ , and Zn 2+ , were investigated by conducting solution chemistry calculations, sulfide precipitation tests, and mineralogy characterizations. It was found that the ability of the valuable metals to form sulfide precipitates followed an order of Zn 2+ > Ni 2+ > Co 2+ > Mn 2+ . The sulfide precipitate of Zn 2+ was the most stable and did not re-dissolve under the acidic condition (pH 4.00 ± 0.05). In addition, the sulfide precipitation characteristics of Zn 2+ was barely affected by the contaminant metal ions. However, in the presence of Al 3+ , the precipitation recoveries of Mn 2+ , Ni 2+ , and Co 2+ were noticeably reduced due to simultaneous hydrolysis and competitive adsorption. The precipitation recoveries of Ni 2+ and Co 2+ in solutions containing individual valuable metals also reduced when Fe 2+ was present, primarily due to competitive precipitation. However, the recovery of Mn 2+ was enhanced due to the formation of ferrous sulfide precipitate, providing abundant active adsorption sites for Mn species. Here, in the solution containing all the valuable metals, Fe 2+ promoted the recovery of the valuable metals due to the higher concentration of Na 2 S and the formation of ferrous sulfide precipitate.

58 GEOSCIENCES↗

DOE OSTI2024

Electric field enhanced diffusion welding of alloy 617: Microstructural characteristics and mechanical properties

This study investigated the microstructural characteristics and mechanical behavior of diffusion welded nickel-based Alloy 617 obtained by electric field-assisted sintering (EFAS) using various parameters. The interfacial microstructure exhibited different characteristics including good grain boundary (GB) migration across the interface in the samples diffusion-welded at 1100 °C and a flat interface in the samples joined at 1000 °C and 1050 °C. The interface consisted of fine Al 2 O 3 oxides, while precipitation of interfacial M 23 C 6 carbides was not observed. Grain boundaries migrated across the Al 2 O 3 oxides, leaving these oxides within the grains. Graded grain size was observed, with grain coarsening being more significant near the sample surface due to the temperature gradient induced by EFAS. Tensile testing revealed that the specimens fractured in the matrix away from the interface, indicting strong diffusion-welded joints. Further, the peak tensile strength of 807 MPa was obtained in the samples welded at 1000 °C due to minimal grain growth. The materials obtained at 1100 °C exhibited reduced tensile strength but improved ductility. Strain maps revealed by digital image correlation showed alternating high and low strain segments in the samples produced at 1000 °C and 1050 °C, indicating that the flat interfaces with no GB migration were less ductile compared to the matrix. A greater strain uniformity was observed along the bond interfaces with improved GB migration. The hardness reduced near the sample surfaces due to enlarged grains induced by temperature gradient. This study demonstrates that GB migration and enhanced mechanical strength can be achieved in diffusion-welded Alloy 617.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Compound pulse characteristics of a heterogeneous composite scintillator in a gamma-ray field

An important aspect of radiation detection in scintillators is the time dependence of emitted fluorescence, which results in characteristic measured pulse shape. In some materials, a relatively strong dependence of the scintillation pulse shape on stopping power exists, which can provide reliable identification of the incident particle. An alternative method to realize particle identification is by combining materials with different fluorescence lifetimes into heterogeneous structures. Such composite scintillators derive their properties from both the constituent material characteristics and the geometry of the composite structure. In composite scintillators with a high degree of heterogeneous loading, a superposition of fluorescence contributions originating in multiple materials, which is observed as single waveform with an intermediate pulse shape, may affect its ability to reject rays. We measure the time dependence of light output from a scintillator composed of 6 Li-containing glass shards and scintillating polyvinyl toluene and identify events that exhibit such compound behavior when exposed to rays and fast neutrons. We develop a modeling and simulation framework that reproduces the pulse shapes in heterogeneous scintillators and use it study the effect that the weight percentage of 6 Li glass has on rejection. The modeling framework is applied to the experimentally studied scintillator, finding a good agreement. Here, the developed modeling and simulation approach will help optimize the design of heterogeneous scintillators to meet the desired trade-o between neutron capture efficiency and -ray rejection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

An experimental investigation on the characteristics of heat pipes with annular type composite wick structure

Here, an experimental investigation has been conducted on the hydraulic characteristics of annular type wick structures for heat pipes. An experimental facility which can measure porosity, permeability, and effective pore radius of the wick structures in a vacuum condition is established. Nine different types of multi-layered (6 layers in total) composite screen meshes are characterized. Based on the measurement results, a wick structure composed of one layer of 100×100 mesh, three layers of 400×400 mesh, and two layers of 60×60 mesh is determined to have the highest permeability to effective pore radius ratio $(K/r_{eff})$ and was selected as a targeted sample. The wick-to-wall gap effect on the hydraulic characteristics of annular type wick structure is also investigated by measuring the permeability and effective pore radius of the sample wick structure with varying gap widths. The result shows that the permeability increases as the gap increases from 0 mm to 1.2 mm. After a peak at 1.2 mm, the permeability decreases as the gap increases and converges to the value of the case measured without a wall structure. The effective pore radius becomes smaller as the gap increases, making a peak at a gap distance of 1.2 mm. This result implies that there is an optimal point in gap distance which is determined to be 1.2 mm for the selected composite mesh structure. A capillary limitation correlation with a multiplying factor which explains the enhanced performance of the wick due to the gap is suggested. An annular wick type heat pipe is constructed and tested. The capillary limitation of the heat pipe showed good agreement with the suggested correlation.

42 ENGINEERING↗

DOE OSTI2020

Effects of dilution and pressure on combustion characteristics within externally heated micro-tubes

Here this study investigates the impact of pressure and dilution on combustion behavior of of C 2H6/air/N2 mixtures within an externally heated micro-tube using both experimental and analytical techniques. Experiments are conducted for pressures up to 10 bar at multiple dilution levels and document three flame regimes, i.e. weak flames, FREI and normal flames. Characteristic temperatures for flame stabilization, as well as and ignition and extinction are obtained by applying a novel thin filament pyrometry method (TFP), which uses a thin silicon carbide (SiC) filament that enables temperature measurements for both reacting and non-reacting cases. Results show a decrease of characteristic temperatures with increasing pressure, which can be which can be partially compensated by a decrease of O2 content. Further, regime transitions occur at lower velocity as the pressure increases, whereas weak flame positions are insensitive to dilution at a given pressure. Predictions from the analytical model compare favorably with experimental results. The most prominent finding is that as dilution increases, the transition from weak flame to FREI becomes less abrupt and is completely lost for high dilution levels (i.e. low O2 content). Both experimental and analytical results indicate that the unstable FREI combustion regime does not exist at high dilution levels, i.e. weak flame and normal flame regimes are no longer clearly separated. As FREI are interpreted as a cyclic transition from an ignition zone to a propagating flame, results for highly diluted conditions are interpreted as a combustion regime where classical flame propagation ceases to exist.

42 ENGINEERING↗

DOE OSTI2022

Convective heat transfer and friction factor characteristics of molten salts in spirally fluted tubes

Spirally fluted tubes have been widely used for heat exchangers due to their superior heat transfer enhancement. However, most of the previous studies focused on the effects of a limited number of geometric parameters, i.e., the flute pitch and flute depth, on convective heat transfer and friction factor characteristics of low-Prandtl-number fluids, i.e., air and water. The correlations developed in these studies may not be accurate or applicable for medium-Prandtl-number fluids, such as molten salts. A numerical analysis using a Computational Fluid Dynamics (CFD) tool, STAR–CCM+, is therefore carried out in this study to systematically investigate the effects of four geometric parameters, including the flute pitch ρ, flute depth e, flute start number N s (or flute helix angle θ), and trough length L tr on convective heat transfer and friction factor characteristics of a medium-Prandtl-number fluid, FLiNaK (46.5LiF-11.5NaF-42KF mol %), in spirally fluted tubes. Additionally, the convective heat transfer and Darcy friction factor correlations are proposed and validated, with ± 20% uncertainties, for medium-Prandtl-number fluids under the following conditions: Re = 88–1600, Pr = 2.5–40, ρ/D c = 0.44–3.51, e/D c = 0.10–0.40, θ/90= 0.20–0.81, and L tr /D c = 0.71–2.16. The correlations proposed help improve the design of spirally fluted-tube heat exchangers.

42 ENGINEERING↗