Results for “Bioproduct” — Page 27

DOE OSTI2022

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2021 State-of-Technology Cases

The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships. BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It informs R&D priorities by identifying areas in need of improvement, tracks sustainability impact of R&D, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available.

09 BIOMASS FUELS↗

DOE OSTI2022

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2021 State-of-Technology Cases

The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships. BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It informs R&D priorities by identifying areas in need of improvement, tracks sustainability impact of R&D, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available.

09 BIOMASS FUELS↗

DOE OSTI2021

Expanding the composition of polyhydroxyalkanoates produced by an industrial host: CRADA 505 [Abstract only]

The Agile BioFoundry (ABF) is a multi-national lab consortium funded by the Department of Energy’s Bioenergy Technologies Office that has developed a biofoundry that enables the rapid deployment of bioproducts into the market. Working with two ABF laboratory members (National Renewable Energy Laboratory (NREL) and Pacific Northwest National Laboratory (PNNL), Danimer will develop bacterial strains to produce PHAs with different compositions aimed at expanding Danimer’s product offerings. This project will enable the ABF to contribute to the development of a high-profile, commercial product that falls squarely in the DOE mission space and has strong potential to have meaningful benefit both to the US economy and the environment.

09 BIOMASS FUELS↗

DOE OSTI2022

Success Through Synergy (STS): Increasing Cultivation Yield and Stability with Rationally Designed Consortia

Consortia of functionally diverse microbial assemblages hold potential to enhance the production of microalgae for biofuels and bioproducts. In laboratory experiments, increases in algal yield have been achieved through the amendment of algal cultures with growth-promoting bacteria, as well as the rational design of algal-algal consortia (i.e., combining strains with complementary traits). Despite this evidence, commercial systems typically rely on monocultures because of the technical challenges that multi-taxa cultures impose. In this project, we aimed to generate algae-bacteria and algae-algae consortia in the lab and test the performance of these consortia against monoculture counterparts in the field. We also aimed to generate toolkits that could be used by the scientific community and algal farmers to advance the cultivation of consortia.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Enhancing organic matter removal, product recovery, and hydrogen generation from fermentation wastewater

Existing ethanol biorefineries produce billions of gallons of wastewater (stillage) that must be treated extensively prior to discharge or concentrated in an energy intense evaporation step to produce animal feed as a value-added bioproduct. Yeasts and filamentous fungi were screened for growth and reduction of soluble organic compounds, carbohydrates, and protein from stillage to identify species capable of rapidly concentrating organic compounds into readily separable biomass in an attempt to concentrate the product using a much more efficient centrifugation step. Yeasts amenable to production of biomass derived products including bio-oils (Yarrowia lipolytica and Rhodotorula pallida), chitosan (Aspergillus niger) and animal feed (Cyberlindnera jadinii) were identified as well as microbes capable of efficient production of small organic acids with applications as bioderived polymers including 3-hydroxypropionic acid (engineered A. niger) and lactic acid using a co-culture of Debaryomyces udenii and Lactobacillus pentosus. The filamentous fungus A. niger eliminated all specifically measured soluble organics (glycerol, acetate, lactate, ethanol, and citrate) in under 48 hours and reduced total soluble protein content by 46% and total carbohydrate content by 83% within 96 hours, the greatest reduction in organic content observed. During this process an A. niger strain engineered to produce 3-hydroxypropionic acid achieved a yield of 0.35 C-mol 3HP / C-mol non-protein organics consumed at an overall rate of 0.09 g/Lh in unmodified stillage without pH control. Stillage treated by the fodder yeast C. jadinii as well as stillage containing acetic or lactic acid was found to be most suitable for growth by electrogenic bacteria with applications in production of electricity or hydrogen from wastewater. This work establishes fungal and bacterial strains appropriate for biological treatment of stillage to produce biomass derived products, soluble commodity chemicals, energy, and treated water to reduce the energy intensity and improve the economics of ethanol biorefineries.

09 BIOMASS FUELS↗

DOE OSTI2023

Decarbonization of Wastewater Treatment with Microalgae Processes.

Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.

09 BIOMASS FUELS↗

DOE OSTI2023

Decarbonization of Wastewater Treatment with Microalgae Processes.

Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.

09 BIOMASS FUELS↗

DOE OSTI2023

Decarbonization of Wastewater Treatment with Microalgae Processes.

Microalgae can contribute to the decarbonization of wastewater treatment by municipalities, industries and agriculture, by substituting sunlight for energy intensive conventional treatment processes, while capturing nutrients and carbon in the algal biomass. The carbon fixed into the algal biomass can be converted to renewable natural gas (RNG) using anaerobic digestion or into renewable diesel and sustainable aviation fuel (SAF) using hydrothermal liquefaction (HTL), with greatly reduce the carbon footprints compared to conventional fuels. Bioplastics, biofertilizers and other bioproducts from microalgae biomass also provide potential benefits in greenhouse gas (GHG) reduction and domestic supply chains. Microalgae technologies can counter eutrophication caused by harmful algal blooms by recovering nutrients, N and P, from wastewaters, and even from very low nutrient concentrations found in surface waters. CO2 is required in microalgae cultivation and wastewater treatment to support maximal rates of the photosynthesis, with the CO2 obtained from the wastes themselves, other local sources or even atmospheric CO2. Greenhouse gas mitigation with microalgae processes is based on life cycle assessments, comparing such green processes with current energy intensive wastewater treatment, and nutrient reduction technologies. Microalgae technologies are specifically relevant to smaller, often disadvantaged, communities, where currently about 5,000 algae wastewater treatment ponds are operated by public utilities with many more are operated by industries. However, many, if not most, of these pond facilities require urgent technology upgrades to achieve the potential and goals of low cost GHG mitigation and efficient nutrient recycling. MicroBio Engineering Inc. is developing and has demonstrated several technologies that combine innovative carbon mitigation and decarbonization technologies for a circular economy, with longer-term potential for large-scale biofuels and biofertilizer production.

09 BIOMASS FUELS↗

DOE OSTI2023

Coupled wave-current modeling for hydrodynamic load analysis of macroalgae cultivation farms

Large-scale cultivation of macroalgae is one of the most promising biofuel sources that could reduce our consumption of fossil fuels and would be particularly economically competitive when grown for the co-production of additional goods such as food and textiles. Current production of biofuel from algal biomass is limited by labor costs and lack of data on potential impacts of cultivation and harvesting on marine and coastal environments as well as a comprehensive characterization of the impact of environmental conditions on macroalgal feedstock and their bioproduct and biofuel yield and quality. Awarded by the United States (U.S.) Department of Energy Advanced Research Projects Agency-Energy (ARPA-E) Macroalgae Research Inspiring Novel Energy Resources (MARINER) program, which seeks to enable the U.S. as a global leader in the production of marine biomass, the Marine Biological Laboratory (MBL) has been developing a test system for tropical seaweed cultivation in the Gulf of Mexico and the Caribbean. An integral step in designing macroalgae cultivation farms is to adequately characterize the hydrodynamic climate at potential growth sites. In regions like the Gulf of Mexico and the Caribbean, which are highly exposed to tropical cyclones, it is critical to not only consider the day-to-day hydrodynamic conditions but to also assess the risk of extreme sea states to ensure the survivability of future macroalgae farms. Under these considerations, the Pacific Northwest National Laboratory (PNNL) is providing modeling support for MBL to inform the design and siting of the farm systems that have been proposed for their ARPA-E MARINER project. This report describes the development of a high-resolution coupled storm surge and wave model to simulate the hydrodynamics and wave climate at proposed macroalgae cultivation sites selected by MBL in Florida and Puerto Rico. Model results, including model validation, water level, current distributions, and sea states, are discussed for both selected sites in Florida and Puerto Rico coast. These simulations provide an accurate insight into the hydrodynamic conditions that a macroalgae farm is likely to experience during its operational lifetime, including current information to support fine-scale hydrodynamic load modeling, risk analysis and system design.

09 BIOMASS FUELS↗

DOE OSTI2023

Challenges and Advances in Aqueous Processing of Corn Stover Pellets into High Concentration Slurries

Significant progress has occurred in developing combined enzyme hydrolysis and fermentation technologies for transforming lignocellulosic feedstocks into ethanol and other bioproducts. Various routes described in the literature show that low carbon footprint processes efficiently convert the cellulose and hemicellulose fractions of pretreated corn stover, wood chips, and sugarcane bagasse to sugars and to ethanol.Combinations of different pretreatments at high or low pH or in liquid hot water, followed by enzyme hydrolysis and fermentation or direct conversion of cellulose to ethanol (i.e., by consolidated bioprocessing)have been demonstrated. These successes have brought the need to preparing the feedstock – before it enters the biorefinery – into focus. This paper summarizes recent developments in liquefying corn stover,before pretreatment, so that slurries with yield stresses below 200 Pa are obtained and a “pumpable” corn stover slurry results at initial solids loadings of up to 300 g/L. The manner in which corn stover pellets are combined with water and enzyme in an agitated bioreactor is described, and properties that define slurry behavior are presented. Implications on biorefinery operations are explained in terms of particle properties and the preprocessing of corn stover as well as the team approach used to obtain these results.

Wassgren, Carl↗

DOE OSTI2023

Lignetics CRADA closeout report

Lignetics is one of the leading domestic producers of wood pellet fuels used for domestic heating. The company also produces pellets for other applications including animal bedding. The primary feedstock used for the production of Lignetics products is woody biomass. To improve the economics of pellet production, Lignetics is evaluating advanced preprocessing technologies developed by researchers at INL. In the proposed project, INL and Lignetics will work collaboratively to assess the feasibility of integrating INL’s advanced preprocessing technologies (fractional milling, high moisture pelleting and low temperature drying) in Lignetics production facilities. The successful completion of the project relies on the integration of the fractional milling and high moisture pelleting (HMP) process and low temperature drying to improve the economics of woody biomass pellet production for use in biofuel and bioproduct applications. In the HMP process, the biomass loses some moisture during compression and extrusion through the pellet die due frictional heat developed. Also, as pellets have a definite size and shape, they can be further dried in low temperature grain or belt dryers. Belt dryers are better suited to take advantage of low-grade and waste heat because they operate at lower temperatures than rotary dryers (Tumuluru et al.) Rotary dryers, for example, typically require inlet temperatures of 260°C, but more optimally operate around 400°C. In contrast, the inlet temperature of a belt dryer, such as a commercially available vacuum dryer, can be as low as 10°C above the ambient temperature, although more typically they operate at higher temperatures, between 90°C and 200°C. Because of their lower temperature operation, fire hazards and emissions to the air are lower for belt dryers in addition to reducing drying and overall pelleting costs, INL’s technology also has potential to reduce emissions at Lignetics facilities.

09 BIOMASS FUELS↗

DOE OSTI2024

Establishing a clostridia foundry for biosystems design by integrating computational modeling, systems-level analyses, and cell-free engineering technologies (Final Report)

Rapid population growth, a rise in global living standards, and economic competitiveness have intensified the need for sustainable, low-cost biofuels and bioproducts production. Industrial biotechnology using microbial cell factories – and waste and/or renewable feedstocks – is one of the most attractive approaches for addressing this need, particularly when large-scale chemical synthesis is untenable. Unfortunately, designing, building, and optimizing biosynthetic pathways in cells remains a complex challenge. With support from the Department of Energy, we worked to address this challenge in a new interdisciplinary venture that established the world’s first clostridial Foundry for Biosystems Design (cBioFAB). Working both in vitro (cell-free) and in vivo, the goal of this project was to interweave and advance state-of-the-art computational modeling, genome editing, omics measurements, systems-biology analyses, and cell-free technologies to expand the set of platform organisms that meet DOE bioenergy goals. Specifically, we manufactured fuel and chemical intermediates via existing and de novo pathways. This report covers the outcomes of our research project.

09 BIOMASS FUELS↗

DOE OSTI2024

Exploring structure-function relationships governing transport by and regulation of the major cyanobacterial bicarbonate transporters SbtA and BicA

Cyanobacteria play a large and essential role in the global carbon cycle, while also representing promising microbial platforms for the direct bioproduction of fuels and chemicals from solar energy and carbon dioxide (CO 2 ). In both cases, a critical step in the overall photosynthetic process is the transport of inorganic carbon (Ci) across the cell membrane, which occurs via different mechanisms and associated transporter proteins that target either CO 2 or bicarbonate (HCO 3 - ). In the latter case, BicA (constitutively-expressed, high-flux/low-affinity Na + /HCO 3 - symporter) and SbtA (low-flux/high-affinity Na + /HCO 3 - symporter, expressed only under low CO 2 conditions) have been identified as the two main cyanobacterial HCO 3 - transporters. This project entailed combining detailed functional and high-resolution structural studies to help fill key knowledge gaps regarding the mechanisms of HCO 3 - transport by BicA and SbtA. Specifically, major goals of this project included: i) identifying key residues and structural features of BicA and SbtA that are responsible for modulating their uptake flux and affinity behaviors, and ii) obtaining high-resolution structures of full-length BicA and SbtA.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Profitability, Scalability and Optimized Siting for Waste-to-Energy Supply Chains: A Case Study on Hydrothermal Liquefaction

Waste-to-Energy (WtE) conversion technologies have the potential to simultaneously reduce waste volumes, treatment-related emissions, and carbon intensity while producing valuable energy services. However, questions remain regarding under which conditions emerging WtE technologies are feasible to deploy. In this project, we develop an optimized siting method for WtE technologies to assess cost-effective WtE processor locations, throughput scales, and profitability. We apply the model using Hydrothermal Liquefaction (HTL) as an example WtE technology. We develop calibrated capital and operating expense cost curves based on literature data to study the techno-economic characteristics of WtE supply chains. Prior to solving the siting optimization, we analyze the model parameters to describe organic waste management system behavior under four different HTL deployment configurations: Co-Processing, where HTL plants send biocrude to existing conventional refineries via assumed pipelines; Co-Location, where biorefineries are co-located with HTL plants; and two alternative Standalone Biorefining cases, where distributed HTL plants transport biocrude intermediate via either assumed pipelines or trucking to centralized biorefineries. We also define and apply several feedstock gate fee calculations, representing different revenue distribution options, to investigate how bioproduct value could impact WtE supply chain economics in terms of waste producer and processor profit or cost reduction.

09 BIOMASS FUELS↗

DOE OSTI2024

The Role of Biofuels and Biomass Feedstocks for Decarbonizing the U.S. Economy by 2050 - (DECARB) Decarbonizing Energy Through Collaborative Analysis of Routes and Benefits

Utilizing biomass resources, such as cellulosic biomass and waste, can greatly contribute to decarbonization efforts in the U.S. economy. The U.S. bioenergy sector includes corn ethanol production, biodiesel, renewable diesel production, and the utilization of biomass wastes for electricity generation being the primary applications. Within the electricity sector, biopower can play a crucial role as a stable low-carbon resource. Enhancing the electricity mix's diversity could enhance grid reliability. If the issues regarding hot gas cleanup can be resolved, flexible biopower resources like biomass gasification facilities could complement the integration of variable renewable energy sources due to their quick ramp-up and ramp-down times. The criticality of bioenergy deployment lies in its ability to decarbonize hard-to-electrify sectors, such as aviation, where alternative decarbonization options may not be viable in the short term. Moreover, bioenergy has the potential to be converted into process heating, building materials, and plastics, which are not considered in this study. A set of pathways was carefully chosen to represent viable options for converting ample herbaceous and woody cellulosic feedstocks into fuels, chemicals, and electricity in this study. In conclusion, biomass pathways provide flexibility by generating various types of bioenergy and bioproducts, including electricity, hydrogen, liquid fuels, biochemicals, and bioplastics. When paired with carbon dioxide capture and storage (CCS), specific bioenergy approaches can effectively extract carbon dioxide from the atmosphere, thus providing an effective decarbonization option for the transportation sector.

09 BIOMASS FUELS↗

DOE OSTI2023

Unrealized Critical Lanthanide Extraction from Sea Algae Mining (UNCLE SAM): Domestic production of critical minerals from seawater

The UNCLE-SAM project, under the Biotechnologies to Ensure a Robust Supply of Critical Materials for Clean Energy program, examined the biomining applications of seaweeds for sustainable, domestic production of critical mineral feedstocks. The ocean is a vast reserve of mineralogical wealth including rare earth elements (REEs) and platinum group metal (PGMs). These elements, categorized as “critical minerals”, are used in telecommunication devices, lasers, LED lighting, turbine generators, electric car motors, jet engine alloys, and many other applications. These critical elements are increasingly vital to a thriving, efficient and sustainable society. However, only a few countries in the global market currently produce and export REEs, leading to potential geopolitical supply disruptions. Marine macroalgae, often referred to as seaweeds, bioconcentrate critical minerals from seawater, including REEs and PGMs. Marine algae cultivation can generate a significant amount of biomass with minimal freshwater, fertilizer, and land requirements. In summary, the UNCLE-SAM project successfully evaluated the technological feasibility for marine macroalgal cultivation as a feedstock for critical minerals, explored the biological capacity of different seaweeds to provide economically relevant domestic mineral production, assessed processing techniques for thermal co-conversion of seaweeds into renewable fuel and mineral feedstocks, and executed techno-economic and lifecycle assessments for identifying the most critical gaps in our current understanding to move the technology into commercially relevant deployment. Further development of this technology could transform the bioproduct and REE mining industries and catalyze the development of a more sustainable future.

58 GEOSCIENCES↗

DOE OSTI2024

Domestication of Algae for Increasing Biomass Productivity

Microalgae cultivation processes have been developed for the production of a variety of bioproducts, however currently only a few species are used in commercial applications. Their domestication, that is strain improvements, is still in its infancy, with major advances required, specifically to maximize biomass productivity a limiting factor in microalgae production. This requires a deep understanding of algal biology, in particular to develop superior strains without the need of genetic technologies that would require lengthy regulatory permits, and often limit consumer acceptance. Adaptive Laboratory Evolution techniques, alone or in conjunction with sexual recombination, can allow for rapid develop of improved strains and their industrial production. Light harvesting antenna reduction has been a major approach to achieve increased photon utilization efficiency by cultures operating under full sunlight conditions due to higher light saturation levels, allowing for higher productivities under outdoor conditions. Decades of research yielded some promising results under controlled conditions with a few specific mutant strains. However, these failed to achieve the anticipated higher productivities in actual algal mass cultures, in part due to the inability of single mutations to overcome photoinhibition, reactive oxygen species, and other pleiotropic impacts on the complex metabolic processes of photosynthesis. Higher productivity strains will require multiple genetic improvements. We report on recent Adaptive Laboratory Evolution with the green alga Scenedesmus obliquus resulting in higher biomass productivity in open pond cultivation. Coupling our approach with sexual recombination and genome sequencing provides a path to algal domestication suitable for large-scale, low-cost biomass production.

09 BIOMASS FUELS↗

DOE OSTI2020

Microalgae Biomass Production for Utilization of CO2 and Mitigation of Greenhouse Gas Emissions

Microalgal cultivation processes for production of foods, feeds, fuels, fertilizers and other bioproducts and wastewater treatment are being considered for reducing CO2 and other greenhouse gas emissions. Major differences between microalgae and higher plant biomass cultivation are include their potential for much higher productivities, their higher content of major (N-P-K) and minor nutrients, and the challenge of harvesting such microscopic plants. Most critical, microalgal mass cultures, unlike higher plants, currently require fertilization with concentrated sources of CO2. As practically all of the C fixed into algal biomass will be re-emitted into the atmosphere in short order, algae processes do not sequester carbon. Their potential for CO2 emissions reductions must thus be based on comparisons with current technologies for the production of competing products, such as biofuels or animal feeds, or in wastewater treatment. Further, due to economic limitations to flue gas transport (3 to 12 % CO2), as well as highly variable diurnal and seasonal CO2 utilization and limited land and water availability near most CO2 sources, only a small fraction of waste CO2 emissions will be directly utilizeable for microalgae biomass production. However, for long-distance transport, flue gas CO2 capture by chemical processes would greatly increase the costs of flue gas utilization. More concentrated, sources of CO2 from refineries, fertilizer, chemical plants, and fermentations are available, but are also very limited relative to the quantities required for commodity production. Microalgae can also be cultivated on organic wastes, which provide both nutrients (N, P, K, etc.) and organic and inorganic carbon for algal growth, reducing greenhouse gas emissions compared to conventional treatment processes. To maximize the potential for algae biomass production and CO2 utilization, direct capture of CO2 from air will be required. This could be accomplished with the algal cultivation process itself in large open-raceway ponds, through chemical and biological enhancements of CO2 transfer into algal cutures. The relative productivities, economics, greenhouse gas balances, and resource potentials of these alternative CO2 sources for large-scale production of microalgae will be reviewed.

09 BIOMASS FUELS↗