Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRITTLENESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Fragmentation of copper current collectors in Li-ion batteries during spherical indentation

Large, areal, brittle fracture of copper current collector foils was observed by 3D x-ray computed tomography (XCT) of a spherically indented Li-ion cell. This fracture was hidden and non-catastrophic to a degree because the graphite layers deformed plastically, and held the materials together so that the cracks in the foils could not be seen under optical and electron microscopy. 3D XCT on the indented cell showed “mud cracks” within the copper layer. The cracking of copper foils could not be immediately confirmed when the cell was opened for post-mortem examination. However, an X-ray radiograph on a single foil of the Cu anode showed clearly that the copper foil had broken into multiple pieces similar to the brittle cracking of a ceramic under indentation. This new failure mode of anodes on Li-ion cell has very important implications on the behavior of Li-ion cells under mechanical abuse conditions. Furthermore, the fragmentation of current collectors in the anode must be taken into consideration for the electrochemical responses which may lead to capacity loss and affect thermal runaway behavior of the cells.

25 ENERGY STORAGE↗

Analysis of the growth of strike-slip faults using effective medium theory

Increases in the dimensions of strike-slip faults including fault length, thickness of fault rock and the surrounding damage zone collectively provide quantitative definition of fault growth and are commonly measured in terms of the maximum fault slip. The field observations indicate that a common mechanism for fault growth in the brittle upper crust is fault lengthening by linkage and coalescence of neighboring fault segments or strands, and fault rock-zone widening into highly fractured inner damage zone via cataclastic deformation. The most important underlying mechanical reason in both cases is prior weakening of the rocks surrounding a fault's core and between neighboring fault segments by faulting-related fractures. In this paper, using field observations together with effective medium models, we analyze the reduction in the effective elastic properties of rock in terms of density of the fault-related brittle fractures and fracture intersection angles controlled primarily by the splay angles. Fracture densities or equivalent fracture spacing values corresponding to the vanishing Young's, shear, and quasi-pure shear moduli were obtained by extrapolation from the calculated range of these parameters. The fracture densities or the equivalent spacing values obtained using this method compare well with the field data measured along scan lines across the faults in the study area. These findings should be helpful for a better understanding of the fracture density/spacing distribution around faults and the transition from discrete fracturing to cataclastic deformation associated with fault growth and the related instabilities.

54 ENVIRONMENTAL SCIENCES↗

Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel

The strengthening mechanism of σ phase in a Fe20Cr9Ni cast austenite stainless steel used for primary coolant pipes of nuclear power plants has been investigated. The yield and ultimate tensile strengths of aged specimens increased comparing with those of the unaged ones. It was found that the increase of strengths is due to the hard and brittle (σ + γ{sub 2}) structure which decomposed from α phase in the steel. Fracture surfaces of specimens after in situ tensile test showed that the inhibition of (σ + γ{sub 2}) structure on the dislocation movements was more significant than ferrite although cracks started predominately at σ/γ{sub 2} interfaces. The (σ + γ{sub 2}) structure behaves like a fiber reinforced composite material. - Highlights: • The strengthening mechanism of σ phase in a Fe20Cr9Ni CASS is investigated. • The yield and ultimate tensile strengths increase with increasing of σ phase. • The increase of strengths is due to hard and brittle (σ + γ{sub 2}) structure. • The (σ + γ{sub 2}) structure in CASS behaves like a fibre reinforced composite material. • The σ/γ{sub 2} and α/σ/γ{sub 2} boundaries hinder the movement of dislocation.

36 MATERIALS SCIENCE↗

Tensile properties of ADI material in water and gaseous environments

Austempered ductile iron (ADI) is an advanced type of heat treated ductile iron, having comparable mechanical properties as forged steels. However, it was found that in contact with water the mechanical properties of austempered ductile irons decrease, especially their ductility. Despite considerable scientific attention, the cause of this phenomenon remains unclear. Some authors suggested that hydrogen or small atom chemisorption causes the weakening of the surface atomic bonds. To get additional reliable data of that phenomenon, in this paper, two different types of austempered ductile irons were tensile tested in various environments, such as: argon, helium, hydrogen gas and water. It was found that only the hydrogen gas and water gave a statistically significant decrease in mechanical properties, i.e. cause embrittlement. Furthermore, the fracture surface analysis revealed that the morphology of the embrittled zone near the specimen surface shares similarities to the fatigue micro-containing striation-like lines, which indicates that the morphology of the brittle zone may be caused by cyclic local-chemisorption, micro-embrittlement and local-fracture. - Highlights: • In contact with water and other liquids the ADI suddenly exhibits embrittlement. • The embrittlement is more pronounced in water than in the gaseous hydrogen. • The hydrogen chemisorption into ADI surface causes the formation of a brittle zone. • The ADI austempered at lower temperatures (300 °C) is more resistant to embrittlement.

36 MATERIALS SCIENCE↗

Characterization of Al–Al{sub 4}C{sub 3} nanocomposites produced by mechanical milling

In this work, a mixture of Al–C–Al{sub 4}C{sub 3} nanopowder previously synthesized by mechanical milling and subsequent thermal treatment was used to reinforce the Al matrix. The nanocomposites were fabricated via high-energy ball milling and subsequent sintering process for different periods of time at 550 °C. Hardness and compression tests were performed to evaluate the mechanical properties of the nanocomposites in the as-milled and sintered conditions. According to the results the reinforcement located in the grain boundaries is responsible for the brittle behavior observed in the nanocomposites during the compression test. The combined effect of sintering and precipitation mechanisms produced an evident increase of the strength of the Al matrix at a relatively short sintering time. By using the Rietveld method the crystallite size and microstrain measurements were determined and correlated with the microhardness values. For the proper characterization of the nanoparticles present in the Al matrix, atomic force microscopy and high resolution electron microscopy were used. - Highlights: • Nanostructured Al{sub 4}C{sub 3} reinforcement was fabricated via mechanical milling and heat treatment. • We found a significant increase of the mechanical properties at short sintering times. • The formation of Al{sub 4}C{sub 3} with during sintering time restricted the excessive growth of the crystallite. • Al{sub 4}C{sub 3} located in the grain boundaries causes brittle fracture observed in compression tests. • There is a correlation between, crystallite size and microstrain values with microhardness.

36 MATERIALS SCIENCE↗

Fine–scale structural features of intercritically aged HSLA-100 plate steel and their influence on yield strength and low-temperature impact toughness

Highlights: • The fine-scale microstructure of HSLA-100 steel intercritically aged at 677 °C was characterized. • Continuous austenite films evolved into isolated islands; large islands transformed to brittle martensite upon quenching. • Copper precipitates in martensite were coarse, and some sub-grain coarsening occurred within martensite. • Intercritically aged steel possessed an inferior strength-toughness balance as compared with sub-critically aged steel. - Abstract: Fine-scale structural features of an HSLA-100 steel intercritically aged at 950 K (677 °C) for 4.2 ks (70 min.) were investigated via transmission electron microscopy. The microstructure consisted of approximately 90 vol. pct. of low‑carbon lath martensite. Average lath width was about 0.25 μm, unchanged from the as-quenched condition, owing to a high number density of epsilon‑copper precipitates at these boundaries. About 10 vol. pct. of medium‑carbon austenite existed as coarsened, broken-up islands between laths; martensite lath boundary coverage by austenite was notably reduced compared to the as-quenched condition. Greater continuity between adjacent low‑carbon martensite laths was accompanied by coarse copper precipitates within laths and an order of magnitude lower dislocation density than the as-quenched martensite. Collectively, these features produced a sub-grain coarsening effect. Austenite islands larger than about 0.5 μm were unstable with respect to the formation of fresh, medium‑carbon martensite regions. Copper precipitation within austenite islands (owing to carbon and copper enrichment) might also have contributed to austenite transformation upon quenching. Intercritical aging was associated with a strong-and-undesirable deviation from strength-toughness behavior at sub-critical aging temperatures. Two key factors were identified as being responsible for this negative outcome: (i) a sub-grain coarsening effect associated with “delamellarization” of low‑carbon martensite and austenite and (ii) the formation of brittle martensite upon quenching. Quantitative estimates of the changes in strength and impact toughness are provided for microstructural differences between intercritically aged and subcritically aged material.

36 MATERIALS SCIENCE↗

Microstructural investigation of oxide dispersion strengthened alloy 617 after creep rupture at high temperature

Highlights: • The creep related microstructural evolution of ODS-617 at 950 °C under 25 MPa was investigated. • Dispersion of nanoscale Y-Al-O particles contributed to the superior creep properties of the ODS-617. • The creep mechanism of the ODS-617 at 950 °C under 25 MPa was Coble creep. • Cracks preferentially developed around the large rod-like AlN particles, resulting in the brittle creep fracture mode. - Abstract: Oxide dispersion strengthened (ODS) alloys have been widely considered as candidate structural materials for advanced nuclear reactors because of their good high temperature properties and irradiation resistance. In this study, the creep properties of oxide dispersion strengthened Alloy 617 (ODS-617) was examined at 950 °C under 25 MPa in the air. Conventional Alloy 617 tested under the same conditions was included for comparison. The ODS-617 exhibited superior creep resistance, including a much longer rupture life of 8533 h and a steady-state creep rate of 8.9 × 10{sup −8} (1/s), which was two orders of magnitude lower than that of the conventional alloy. The lower steady-state creep rate was related to the dispersion of nano-sized Y-Al-O particles, which may impede grain boundary diffusion. It seems that cracks preferentially developed near some large rod-like AlN particles, resulting in the brittle creep fracture mode.

36 MATERIALS SCIENCE↗

Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium

Highlights: • In the present study, FSW of Al to Ti with Nb interlayer has been characterized. • Fragmentation and distribution of Nb and Ti have been correlated with properties. • Ternary mixing and chemical reaction reduced the brittleness of the joint. • Al in the weld nugget showed a gradient in microstructural features. • The weld with Nb interlayer exhibited higher ductility. - Abstract: The most important issue associated with dissimilar welding is the formation of detrimental intermetallics and consequent reduction in mechanical properties of the weld. It was expected that addition of an interlayer would modify the pattern of the intermetallic formation. The present investigation deals with Friction Stir Welding of aluminum (Al) to titanium (Ti) in presence of niobium (Nb) interlayer. X-ray Computed Tomography results highlighted that fine particles of both Ti and Nb are homogeneously distributed. Large Ti particles are substantially fragmented whereas large Nb particles remain as flakes. Microstructural features of the nugget zone indicated a complex mixing of materials. Jointing had been perceived through elemental diffusion at the interfaces of Al/Ti and Ti/Nb. However, Nb restricted the reaction between Al and Ti, and acted as an efficient interlayer to retard the formation of brittle Al{sub 3}Ti intermetallic phase. Mechanisms of microstructural evolution in Al side of the weld have been identified as Dynamic Recovery, Dynamic Recrystallization and particle stimulated nucleation. Significant improvement in the tensile ductility had been observed due to the presence of finer particles. The presence of Nb in the weld nugget influences the microstructural evolution and tensile properties of the weld by reducing the formation of intermetallics.

36 MATERIALS SCIENCE↗

Strain partition and rupture analysis of notched tensile multilayered steel specimens

Highlights: • In situ SEM tensile experiments were performed to investigate the fracture processes. • In situ synchrotron x-ray diffraction were carried out to study the microscopic deformation in MLS steel. • The changing trends of the strain in the austenite layer and martensitic layer have been revealed. - Abstract: Multilayered steel composites consisting of alternating martensitic and austenite layers were successfully fabricated with a combination of high strength and ductility. In situ SEM tensile experiments were performed to investigate the fracture processes. Results indicated that the martensitic layer distributed between two ductile austenite layers has better deformation ability, and the dimple fracture mode dominated the fracture of the whole specimen. In situ synchrotron microbeam X-ray diffraction experiments were carried out to study the microscopic deformation in austenitic layer and martensitic layer ahead of notch root under incremental tensile loading. Results indicated that for austenite layer, the maximum strain is located in the middle of the layer at the lower applied load. When at the higher applied load, larger strain is concentrated on the notch root. For martensitic layer, uniform strain is distributed at the region at the lower applied load, with increasing the applied load, small strain appears in the middle of martensitic layer. However, the variation in the strain in the martensitic layer is relatively smaller, which is actually affected by both the notch and the ferrite content in the martensitic layer. The changing trends of the strain in the austenite layer and martensitic layer can still show the better combination of brittle martensitic phase and ductile austenite phase.

36 MATERIALS SCIENCE↗

Design of Silicide-Strengthened Nb–Si–Cr–(Mo) alloys for additive manufacturing

Three high–intermetallic volume Nb–Si–Cr–(Mo) alloys were designed using CALPHAD modeling with the goal of identifying high–specific strength, oxidation-resistant alloys that can be additively manufactured using powder bed fusion. The silicides Nb 5 Si 3 and Nb 9 Si 2 Cr3 were targeted as the primary strengthening phases, and the addition of Cr promoted the NbCr 2 phase. These alloys were cast and surface-processed with electron beam welding at different speeds to simulate additive manufacturing, and the phases and microstructures of both cast and welded regions were characterized. The weld processing was found to produce fine-grained microstructures in each alloy with fine-scale intermetallics uniformly distributed among a body-centered cubic Nb matrix. Microstructural refinement and hardness were found to increase with weld velocity; one alloy reached its highest hardness of approximately 16 GPa before the brittleness at higher velocities became detrimental. One alloy was found to be qualitatively the least brittle while also attaining a hardness of 13 GPa and was therefore identified as a good candidate for additive manufacturing.

36 MATERIALS SCIENCE↗

Pressure and doping dependent elastic and thermodynamical properties of Ga{sub 1-x}In{sub x}P mixed valent compounds

Using a phenomenological lattice model incorporating the long-range Coulomb and charge transfer caused by the deformation of the electron shells of the overlapping ions and the Hafemeister and Flygare type short-range overlap repulsion extended upto the second neighbor ions and the van der Waals (vdW) interaction, we present a comprehensive study to understand the effects of pressure on the elastic behavior as ductility (brittleness) and thermodynamical properties of Ga{sub 1-x}In{sub x}P. Estimated phase-transition pressure and the vast volume discontinuity in pressure-volume phase diagram confirm the structural phase transition from zinc blende (B3) to rock salt (B1) phase. From the elastic constants the Poisson's ratio {nu}, the ratio R{sub S/B} of S (Voigt averaged shear modulus) over B (bulk modulus), elastic wave velocity, average wave velocity and thermodynamical property Debye temperature is calculated. The Poisson's ratio {nu} and the ratio R{sub S/B} allows one to conclude that Ga{sub 1-x}In{sub x}P is brittle in zinc blende (B3) and ductile nature is inferred in sodium chloride (B1) phase. To our knowledge this is the first quantitative theoretical prediction of the doping and pressure dependent elastic properties for mixed valent Ga{sub 1-x}In{sub x}P compounds and still awaits experimental confirmations.

36 MATERIALS SCIENCE↗

Charpy impact tests of tungsten fiber–reinforced composite from -150 °C to 1000 °C

Tungsten features a unique combination of properties that makes it a favorable plasma-facing material in fusion reactors. The main drawbacks of tungsten are its brittleness at room temperature and the potential embrittlement during operation. Tungsten fiber–reinforced composites have the potential to overcome these limitations. Charpy impact tests ranging from -150 °C to 1000 °C have been performed. To identify the ductile-to-brittle transition temperature and understand the behavior at high temperature a detailed microscopic investigation was used to identify the transition temperature of fiber and matrix, which was between -100 °C to -50 °C and 1000 °C, respectively.

36 MATERIALS SCIENCE↗

Fabrication and operational considerations of hydrogen permeable Mo 2 C/V metal membranes and improvement with application of Pd

Mo 2 C has previously been demonstrated as an effective catalyst layer to enable stable H 2 permeation through vanadium foils at high temperatures. Here, in this paper, this approach was extended to several group V metal foils (V, Nb, and Ta) as well as mixed gas testing. The best permeability was achieved with V, and an activation process was developed to recover the performance of V foils displaying evidence of oxidation. Nb foils yielded ~20% the permeability of V, while Ta was too brittle to operate effectively. Mo 2 C/V membranes were operated at feed conditions well above the ductile-to-brittle transition pressure without embrittlement; however, the H 2 permeability of Mo 2 C/V membranes was significantly attenuated at lower temperatures (< 600 °C). H 2 permeation was also severely inhibited by the presence of N 2 or CO 2 in mixed gas environments due to strong competitive adsorption. The addition of a Pd catalyst layer on top of Mo 2 C improved mixed gas stability and increased H 2 permeability to 2 × 10 -8 mol·m -1 ·s -1 ·Pa -0.5 at 500 °C for V based membranes. Lastly, as an interlayer, Mo 2 C was demonstrated to be a stable barrier preventing Pd-V interdiffusion at 500 °C while simultaneously allowing significant H 2 permeation.

08 HYDROGEN↗

Impact toughness of commercial and model FeCrAl alloys

FeCrAl alloys are under development as possible candidate materials of accident-tolerant fuel cladding in light water reactors. In this paper, the cracking resistance of FeCrAl alloys was evaluated using half-size Charpy impact tests at temperatures ranging from room temperature to 600 °C. Ingot-metallurgy wrought FeCrAl alloys with base alloy compositions of Fe-(10–13)Cr-6Al-2Mo, in weight percent, and commercial powder-metallurgy FeCrAl alloys (Kanthal APMT) were investigated. All studied alloys showed almost zero absorbed impact energy at room temperature with brittle fracture behavior. The as-received APMT alloys exhibited poor impact toughness even at 600 °C. The ductile-brittle transition temperatures of the wrought FeCrAl alloys varied from 119 to 318 °C. Finally, the possible effects of microstructures, residual strain, materials preparation methods, process conditions, and chemical composition on the impact toughness of FeCrAl alloys were investigated by examining the Charpy impact data in combination with microstructural details of the alloys.

36 MATERIALS SCIENCE↗

Hydrogen embrittlement behaviors of additive manufactured maraging steel investigated by in situ high-energy X-ray diffraction

The microstructures and mechanical properties of additively manufactured (AM) maraging steel were investigated before and after hydrogen charging. The hydrogen-charged specimen suffers severe hydrogen embrittlement and its strength and plasticity decline obviously. The mechanism of ductile-to-brittle transition of AM maraging steel after hydrogen charging was studied by in situ high energy X-ray diffraction and electron backscatter diffraction techniques. Martensitic transformation occurs in the hydrogen-charged specimen under low stress. The premature phase transformation along with hydrogen-induced microcracks resulting in the brittle fracture of the hydrogen-charged specimen.

36 MATERIALS SCIENCE↗

Dynamic properties of FeCrMnNi, a high entropy alloy

The goal of this paper was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Specifically, gas gun experiments coupled with recovery were performed on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and its spall strength, which is a measure of the stress required to nucleate voids under shock loading conditions. While there has been a plethora of work performed to assess the mechanical properties of these HEAs under uniaxial stress conditions as a function of strain rate, investigation of its properties in dynamic extremes remains rare. The current work fills this gap in knowledge for this novel class of materials. Our results show that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, while the spall strength for this material was found to be ~1.9 GPa, with some variation based on sample location, the main failure mode was brittle. This brittle failure leading to formation of cracks in the material is different than the ductile failure observed in pure iron and its alloys.

36 MATERIALS SCIENCE↗