Exceptionally high-affinity Ras binders that remodel its effector domain
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not provided.
Electrospun nanofiber electrodes for hydrogen/air fuel cells were prepared using poly(ethylene oxide) (PEO) carrier polymer, where previous publications used poly(acrylic acid) (PAA). Electrospinning with PEO carrier is only possible when the ink contains Nafion® in its salt form. Here, fiber electrodes were evaluated in 5 cm 2 membrane-electrode-assemblies (MEAs) and exhibited excellent power at high and low feed gas relative humidities. For example, a nanofiber cathode MEA made from an ink containing Na + -form Nafion, PEO, and Pt/C generated 822 mW/cm 2 at maximum power, 40% RH, 80 °C, and 200 kPa abs , whereas PAA-based ink electrode MEAs produced 527 mW/cm 2 . Changes in PEO molecular weight had no notable impact on fuel cell performance. Different Nafion counter-ions were studied. The use of Cs + -form Nafion resulted in the best MEA performance, producing 919 mW/cm 2 at maximum power under full humidification and 800 mW/cm 2 at 40% RH.
Not provided.
Not Available
Not Available
This code is a wrapper for Python code so that it can be accessed by MOOSE and the two can pass variables back and forth. Since this code was developed by ORNL, it must be independently approved before being added to the MOOSE repository.
Abstract not provided
This topical report presents work completed to re-establish the manufacturing process for poly(ethylene-co-vinyl acetate-co-vinyl alcohol) terpolymer called VCE. The new VCE formulations meet the material requirements and have lower melt viscosity, which results in improved production for the next assembly. In addition, the reaction conditions were optimized in order to achieve a satisfactory conversion rate to enable production in a single work shift. Several equipment and process changes were made to yield a manufacturing process with improved product quality, yield, efficiency, and worker safety.
Explore the source record for details and available documents.
We describe here a low temperature route to coatings that were originally intended to provide properties similar to gas phase deposited LiPON, but by using solution coating of polymer precursors containing the same elements with similar thicknesses. The intent was to find a simple alternative to the sometimes costly gas phase deposition methods. Our approach involves the synthesis of polymer versions of O=P(NH 2 ) 3 from OPCl 3 followed by lithiation with LiNH 2 . We chose a series of substrates produced in our laboratories that are typically 10-50 µm thick and fully dense ceramic electrolytes. We then coated thin films of α-Al 2 O 3 , LiAlO 2 of various densities, and LATSP (Li 1.7 Al 0.3 Ti 1.7 Si 0.4 P 2.6 O 12 ) with LiPON derived polymer precursors.
We describe here a low temperature route to coatings that were originally intended to provide properties similar to gas phase deposited LiPON, but by using solution coating of polymer precursors containing the same elements with similar thicknesses. The intent was to find a simple alternative to the sometimes costly gas phase deposition methods. Our approach involves the synthesis of polymer versions of O=P(NH 2 ) 3 from OPCl 3 followed by lithiation with LiNH 2 . We chose a series of substrates produced in our laboratories that are typically 10-50 µm thick and fully dense ceramic electrolytes. We then coated thin films of α-Al 2 O 3 , LiAlO 2 of various densities, and LATSP (Li 1.7 Al 0.3 Ti 1.7 Si 0.4 P 2.6 O 12 ) with LiPON derived polymer precursors.
We report here efforts to develop polymer precursor electrolytes that offer properties anticipated to be similar or superior to LiPON glasses. Such precursors offer the potential to be used to process LiPON-like thin glass/ceramic coatings for use in ASBs. Here, LiPON glasses provide a design basis for the synthesis of a set of oligomers/polymers by lithiation of OP(NH 2 ) 3-x (NH) x [from OP(NH) 3 ], OP(NH 2 ) 3-x (NHSiMe 3 ) x and [P=N] 3 (NHSiMe 3 ) 6-x (NH) x . The resulting systems have degrees of polymerization ranging from 5-20. Treatment with selected amounts of LiNH 2 provides varying degrees of lithiation and Li + conducting properties commensurate with Li + content. The polymer electrolytes + celgard exhibit Li + conductivities as high as ~1 × 10 -5 S/cm at room temperature. The polymer electrolytes are also thermally stable up to ≈150 °C. A Li-S battery was assembled using a Li 6 SiPON composition polymer electrolyte. This battery exhibits an initial reversible capacity of 1500 mAh/g sulfur and excellent cycle performance at 0.25 and 0.5 C rate over 120 cycles, declining to 750 mAh/g at the end of the 220 h test period.
This report documents tech transfer from Penn State to Ionomer Solutions LLC for high-temperature polymer electrolyte membrane fuel cells. High-temperature polymer electrolyte membrane (HT-PEM) fuel cells are enticing power plants for heavy-duty vehicle (HDV) transportation because their elevated temperature operation fosters greater heat rejection through larger temperature differentials. In 2021, over 6 million battery electric light duty vehicles (LDVs) were sold. Conversely, only 19,000 LDVs using fuel cell power trains were sold in 2021. Given the meteoric rise of battery-based powertrains for LDVs and its projected growth, stakeholders for fuel cell technology for transportation have shifted their focus towards HDVs rather than LDVs given fuel cells specific and volumetric energy density advantage over batteries when the vehicle is large, heavy, and/or needs to move large distances before refueling.
Abstract not provided.