Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atmospheric entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Aerodynamic characteristics of the planetary atmosphere experiments test entry probe

The aerodynamic characteristics of the Planetary Atmosphere Experiments Test entry probe were determined experimentally in ballistic range tests over a wide range of Mach and Reynolds numbers, and were compared with full-scale flight results. The ground facility data agreed with the full-scale data within 2 to 3% in drag coefficient, and within 5 to 10% in static stability, at the higher Mach numbers. Comparisons of the flight data with conventional wind-tunnel data indicated a significant disagreement in drag coefficient in the transonic speed range suggestive of important sting or wall interference effects. Variations in drag coefficient with Mach number were very small hypersonically, but variations with Reynolds number were of the order of 15% at a free-stream Mach number of 13 over the Reynolds number range from 10,000 to 1,000,000. Variations in the lift and static-stability curves with Mach number and Reynolds number were also defined.

Sammonds, R. I.↗
NASA NTRS2010

The Challenge of Mars EDL (Entry, Descent, and Landing)

This slide presentation reviews the some of the challenges of Martian atmospheric entry, descent and landing (EDL) on the surface of Mars. It reviews some of the technological difficulties, and some solutions that are being developed for future unmanned missions with larger payloads than previous landers, and ultimately human spacecraft landing.

Sostaric, Ronald↗
NASA NTRS1986

Performance evaluation of an entry research vehicle

The aerodynamic database upon which the missions and the proposed designs of an atmospheric entry research vehicle (ERV) would be based are discussed, along with a trajectory analysis of two missions proposed for the ERV. The ERV is intended as a means to explore reentry techniques, thermal protection systems and cross-range and orbital change maneuvers beyond the operational envelope of the Orbiter. The 25 ft long ERV would have a 13 ft wingspan, allowing it to be launched from the Orbiter bay. The ERV would have atmospheric maneuvering control surfaces and reaction control systems for orbital maneuvers. The total weight would be 12,000 lb. The aerodynamic design for the ERV was developed from wind tunnel, theoretical and Shuttle data for continuum, transition and free-molecule flight regimes. Typical flight profiles for intended missions are outlined.

Powell, R. W.↗
DOE OSTI2022

FSISPH: An SPH formulation for impacts between dissimilar materials

Here, we present an SPH formulation with several new features designed to better model the fully-compressible interaction of dissimilar materials. We developed the new method to simulate the atmospheric entry and break-up of small celestial bodies in planetary atmospheres. The formulation uses a unity-based, density-energy discretization of the hydrodynamic conservation laws with linear-corrected kernel gradients. To account for variations in compressibility, we use an HLLC approximate Riemann solver to adjust the velocity gradient at material interfaces. To handle large transverse velocity discontinuities, we introduce a simple slip interface model that limits the artificial viscosity at material interfaces. Diffusion is optionally applied through the velocity gradient and this allows the density and specific thermal energy to evolve in a manner more consistent with the first law of thermodynamics in comparison to other more direct diffusion schemes. We also introduce a material-local second-order artificial conduction scheme used to smooth the specific thermal energy field. Material damage fits neatly under this framework by treating the damage front as a material interface. The method has been implemented as a solver, FSISPH, within the code, Spheral++, and is publicly available on github. We test our new solver on a number of classic shock, mixing, and multi-material problem. The components we outline can significantly improve accuracy of SPH for problems with sharp contact discontinuities.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1977

Low Reynolds number flow past a blunt axisymmetric body at angle of attack

Low Reynolds number flow of an ideal gas over a blunt axisymmetric body of large half-angle at small angles of attack is investigated, for the case of laminar hypersonic flow. Time-varying viscous shock layer equations describing the flowfield are obtained from the full Navier-Stokes system by keeping terms to second order in the inverse square root of Re in both viscous and inviscid regions; the equations are valid for moderate to high Re. Drag, skin friction, and heating rates were obtained at small (or zero) angles of attack. Conditions experienced by planetary entry probes during the high-altitude (early) legs of an atmospheric entry trajectory are pertinent to the problem.

Kumar, A.↗
NASA NTRS1978

Earth recovery mode analysis for a Martian sample return mission

The analysis has concerned itself with evaluating alternative methods of recovering a sample module from a trans-earth trajectory originating in the vicinity of Mars. The major modes evaluated are: (1) direct atmospheric entry from trans-earth trajectory; (2) earth orbit insertion by retropropulsion; and (3) atmospheric braking to a capture orbit. In addition, the question of guided vs. unguided entry vehicles was considered, as well as alternative methods of recovery after orbit insertion for modes (2) and (3). A summary of results and conclusions is presented. Analytical results for aerodynamic and propulsive maneuvering vehicles are discussed. System performance requirements and alternatives for inertial systems implementation are also discussed. Orbital recovery operations and further studies required to resolve the recovery mode issue are described.

Green, J. P.↗
NASA NTRS1971

The relative effects of entry parameters on thermal protection system weight

Shielding a spacecraft from the severe thermal environment of an atmospheric entry requires a sophisticated thermal protection system (TPS). Thermal computer program models were developed for two such TPS designs proposed for the space shuttle orbiter. The multilayer systems, a reusable surface insulation TPS, and a re-radiative metallic skin TPS, were sized for a cross-section of trajectories in the entry corridor. This analysis indicates the relative influence of the entry parameters on the weight of each TPS concept. The results are summarized graphically. The trajectory variables considered were down-range, cross-range, orbit inclination, entry interface velocity and flight path angle, maximum heating rate level, angle of attack, and ballistic coefficient. Variations in cross-range and flight path angle over the ranges considered had virtually no effect on the required entry TPS weight. The TPS weight was significantly more sensitive to variations in angle of attack than to dispersions in the other trajectory considered.

Hirasaki, P. N.↗
NASA NTRS2022

Entry, Descent, and Landing Instrumentation

Overview of sensors used in EDL instrumentation suites. For spaceflight missions involving atmospheric entry, the environment experienced by a spacecraft cannot be fully replicated on the ground. Taking measurements in the flight environment is the “gold standard” for: Validating predictive modeling tools Reducing risk on future EDL missions EDL Instrumentation can consist of in-situ sensors embedded within the aeroshell, or remote observations. Focus of this presentation is on NASA in-situ sensors.

EDL↗
NASA NTRSDate not supplied

Advances in Entry Modeling for Impact Risk Assessment

A summary of recent advancements in the detailed modeling of asteroid atmospheric entry processes made through NASA’s Asteroid Threat Assessment Project (ATAP) is presented. Understanding, and accurately modeling these processes and their associated uncertainties is critical to predicting all downstream impact effects, such as blast wave and thermal damage footprints. Furthermore, there is (perhaps thankfully) a dearth of empirical data for large impactors of the kind that would pose a threat to human populations, on which to anchor and/or validate models used in risk assessments. Therefore, we must rely heavily on detailed theoretical and numerical modeling to develop robust assessments for decision makers. To that end, ATAP has made some significant progress in advancing the capabilities in this area. Two areas in particular are highlighted in the present work: meteoroid ablation mechanisms, and bolide luminosity.

ATAP↗
NASA NTRS2019

Overview of Heatshield for Extreme Entry Environment Technology (HEEET)

The objective of the Heatshield for Extreme Entry Environment Technology (HEEET) projects is to mature a 3-D Woven Thermal Protection System (TPS) to Technical Readiness Level (TRL) 6 to support future NASA missions to destinations such as Venus and Saturn. Destinations that have extreme entry environments with heat fluxes > 3500 W/cm2 and pressures up to 5 atmospheres, entry environments that NASA has not flown since Pioneer-Venus and Galileo. The scope of the project is broad and can be split into roughly four areas, Manufacturing/Integration, Structural Testing and Analysis, Thermal Testing and Analysis and Documentation. Manufacturing/Integration covers from raw materials, piece part fabrication to final integration on a 1-meter base diameter 45-degree sphere cone Engineering Test Unit (ETU). A key aspect of the project was to transfer as much of the manufacturing technology to industry in preparation to support future mission infusion. The forming, infusion and machining approaches were transferred to Fiber Materials Inc. and FMI then fabricated the piece parts from which the ETU was manufactured. The base 3D-woven material consists of a dual layer weave with a high-density outer layer to manage recession in the system and a lower density, lower thermal conductivity inner layer to manage the heat load. At the start of the project it was understood that due to weaving limitations the heat shield was going to be manufactured from a series of tiles. And it was recognized that the development of a seam solution that met the structural and thermal requirements of the system was going to be the most challenging aspect of the project. It was also recognized that the seam design would drive the final integration approach and therefore the integration of the ETU was kept in-house within NASA. A final seam concept has been successfully developed and implemented on the ETU. The structural testing and analysis covers from characterization of the different layers of the infused material as functions of weave direction and temperature to sub-component level testing such as 4pt bend testing at sub-ambient and elevated temperature and culminates in testing of the ETU results from which will validate the structural models developed using the element and sub-component level tests. Given the seam has to perform both structurally and aerothermally during entry a novel 4pt bend test fixture was developed allowing articles to be tested while the front surface is heated with a laser. These tests are being utilized to establish the systems structural capability during entry.A broad range of aerothermal tests (arcjet tests) were performed to develop material response models for predicting the required TPS thickness to meet a missions needs and to evaluate failure modes and establish the capability of the system. The final aspect of the project is to develop a comprehensive Design and Data Book such that a future mission will have the information necessary to adopt the technology. This presentation will provide an overview for each of these areas and argue that HEEET has successfully achieved TRL 6.

HEEET↗
NASA NTRS1993

Size distribution of interplanetary iron and stony particles related with deep-sea spherules

To study origin and evolution of the interplanetary dust, it is very important to investigate the size distribution. Here the changes of the size distributions of meteoroid particles due to the ablative effects during atmospheric entry were investigated by numerical computer simulation. Using the results, the pre-atmospheric size distributions of the interplanetary dust particles could be estimated from that of ablated spherules taken from deep-sea sediments. We are now analyzing deep-sea spherules from some aspects and examining if we could get any information about the interplanetary dust.

Matsuzaki, H.↗
NASA NTRS2019

Overview of Heatshield for Extreme Entry Environment Technology (HEEET)

The objective of the Heatshield for Extreme Entry Environment Technology (HEEET) projects is to mature a 3-D Woven Thermal Protection System (TPS) to Technical Readiness Level (TRL) 6 to support future NASA missions to destinations such as Venus and Saturn. Destinations that have extreme entry environments with heat fluxes > 3500 W/sq cm and pressures up to 5 atmospheres, entry environments that NASA has not flown since Pioneer-Venus and Galileo. The scope of the project is broad and can be split into roughly four areas, Manufacturing/Integration, Structural Testing and Analysis, Thermal Testing and Analysis and Documentation. Manufacturing/Integration covers from raw materials, piece part fabrication to final integration on a 1-meter base diameter 45-degree sphere cone Engineering Test Unit (ETU). A key aspect of the project was to transfer as much of the manufacturing technology to industry in preparation to support future mission infusion. The forming, infusion and machining approaches were transferred to Fiber Materials Inc. and FMI then fabricated the piece parts from which the ETU was manufactured.

Thermal Protection System↗
NASA NTRSDate not supplied

TPSAS-NF1676L-27111-DND

Rigid aeroshell systems are rapidly approaching the payload limit that current technology can deliver while fitting within the payload envelope of existing launch vehicles. The need for higher entry mass, landing elevation, and more controllability has pushed NASA to improve existing atmospheric entry technologies to further its scientific and exploration capabilities. Hypersonic Inflatable Aerodynamic Decelerators (HIADs) are an emerging technology that allows entry vehicles to deliver larger payloads to higher landing elevations by providing a larger aeroshell diameter than rigid aeroshells. HIADs offer new methods of entry vehicle trajectory control through shape morphing of the inflatable aeroshell. This dissertation explores different concepts of morphing a HIAD by assessing its structural integrity, aerodynamic performance, and systems integration. Analytical models are developed to predict the amount of force required to achieve a desired morphed shape, an actuator and sensor are selected based on performance requirements, and a controller is designed to morph the HIAD through Lift-to-Drag modulation. The actuator and sensor system and controller are then integrated into a small-scale development unit of a HIAD and experimental results are compared to numerical simulations. Conclusions and contributions of this research are presented along with a discussion on further research opportunities of Morphing HIADs.

Adam Milne Slagle↗
NASA NTRS1998

Mars Pathfider Rarefied Aerodynamics: Computations and Measurements

On July 4, 1997, after traveling close to 500 million km, the Pathfinder spacecraft successfully completed entry, descent, and landing at Mars. In the present paper, the focus is on the hypersonic rarefied portion of Pathfinder's atmospheric entry where the synergy of flight measurements, aerodynamic calculations, and atmospheric modeling tools are used to extract Pathfinder's attitude and the freestream density. Accuracy of the capsule aerodynamics directly impacts the inferred atmospheric properties extracted from deceleration measurements made by on-board accelerometers. The range of rarefaction considered in this study extends from the free molecular to continuum conditions and angles of attack from O to 30 deg. The aerodynamic computations are made with free-molecular and direct simulation Monte Carlo codes. The calculations show that Pathfinder is statically unstable for much of the transitional rarefied regime. Due to the relatively modest forces and the gyroscopic motion of the spacecraft, the angle of attack excursions were less than 5 deg as inferred from force measurements for the rarefied portion of entry and approached a nominal zero degree trim angle near hypersonic continuum conditions.

Moss, James N.↗